Acc.assignment object replaced by current master cost center for employee

Hi,
I am facing a peculiar warning message while running the payroll posting run for only 2 employees.  The warning message s as follows:
"Acc.assignment object replaced by current master cost center for employee
Message no. 3G399"
Prior to this, there were an error saying the
"Account assignment objects are incorrect. No substitution is possible.
Message no. 3G209"
Later we found that the Position was not assigned to that employee properly.  I later assigned the correct position.. but still during the posting run the warning message appears.
Please let me know if this is okay or is this an error which restricts the postings.
Regards,
Balaji TR

Your postings will go through with the first warning message. However, please be warned that any account assignment related entries (IT 0027, 2001, 2002) will be wholly ignored.
Check if any entries have been made to different cost centers for the erroring employees. If so, check for the reason why those entries have been made (since it is evident that the configuration does not support such entries). You may need to tie in with a CO consultant to ensure that there are no loose ends.

Similar Messages

  • How to change cost center for employee

    Hi,
    I want the engineering groups to change to different cost centers for this new year.I was able to change the home cost center for a work center through IR02. But not able to change the home cost center assignment for specific personnel through PA30. SAP allows to enter the cost center but while saving it gives the error message as "Start date after initial entry date (01/01/2010)" when I used a 01/01/2011 start date and "Cost Center does not exist on 01/01/2010" when I used 01/01/2010 start date
    Could please tell how to change the cost center for the personnel?
    Thanks & Regards,
    Jegashree

    Hi Jegashree!
    The Cost Centre is always assigned in creating Position. So If you want to change Cost Centre, please using T-Code PPOME and find the position and change the Cost Centre.
    The another way, you use t-code PP01 (create) PP02 (edit) to change the relationship (IT 1001) and A-011.
    Hope you can solve it.
    Regards!
    Woody.

  • Re-assign/Change Master Cost Center

    Hi,
    How do we re-assign / change the Master Cost center for a root level org unit under its COST Distribution tab while using PPOME.
    Would like to know where do we do the changes from the available Cost Centers.
    Thanks

    See, yes you can change,
    whenever  you want to change the Master Cost center follow the step
    PPOSE-SELECT START DATE whatever you want Eg. 01.04.2009 , - time Period Complete & Execute-
    Click top left side change button 
    Search you Position -- Double click-go to Account Assignment - Change valid from date (which date from you want to change the cost center)
    Change the cost center & Save 
    This process for follow Org Unit & Position also
    Check the records of the date in Valid from or To there is small arrow First record & previous record other wise select period
    MHPO

  • Deviate from Master cost center

    Dear All,
    Can any one plz solve this issue. A position had been assigned to cost center and master cost center.How do we deviate that position from the master cost center?
    2). What features do you come across in payrolls employee attributes and CAP PCR. establish the relationship among them?
    3). What is symbolic account?
    Thanks in advance, points will be given.
    Regads
    Satya

    Hai..
    u can change the master cost center for a position in 1015 IT....
    CAP & PCR:
    Groupings for the personnel calculation rules and collective agreement provisions for all employee groups and subgroups are defined ...
    The employee subgroup grouping for the personnel calculation rule is required in Payroll Accounting. The collective agreement provisions grouping is required for indirect valuation of wage types in the Basic Pay infotype (0008).
    Standard settings
    Employee subgroup grouping for the personnel calculation rule:
    1 = hourly wage
    2 = periodic payment (eg.monthly wage)
    3 = salary/pension
    4 = pay (German civil service)
    5 = social insurance (German civil service)
    Employee subgroup grouping for the collective agreement provisions:
    1 = industrial workers/hourly wage
    2 = industrial workers/monthly wage
    3 = salaried employee
    4 = AT
    Symbolic Account: Payroll object used when posting results to accounting. The number of symbolic accounts and the respective characteristics represent the different expenses and payables that occur as personnel costs within payroll and must be posted to accounting. The sysmbolic accounts are assigned to financial accounts. This ensures that account determination takes place during posting to accounting.

  • Link between plan position and master cost center

    hi guys,
    i have the plan position number and i don't know how to determine the master cost center.
    do you now the infotype/table that has the link between the two?
    regards,
    emilia

    hi,
    thanks for the function.
    i know that when a position plan is created it is assign to an org. unit and thus it will inherit its master cost center.
    the problem is that more often than not the master cost center of the position plan is changed manually and so it will not match the one of the org unit.
    this is indeed an intricate issue

  • Assigning Finance manager position to a cost center in Org. Unit.

    Hi Guys,
                  How to Assign Finance manager position to a cost center in Org. Unit.
    I am using this assignment in a workflow, selecting finance manager from table HRP1001.
    Thanks
    Senthil

    Senthil
    We dont assign the Cost Centre to positon directly
    We assign the Cost Centre to the Org Unit
    later while assigning the Position to the Org Unit  the cost Centre will auotmatically gets defaul to Positions which belongs to that Org Unit
    try thru tcode PP01  give ur Object id of ur org unit and select Cost Centre Assigment infotype  gibve the dates
    ther give the Relationship A 011  and select ur Cost Centre  (K) 
    or u can also do thru Expert Mode P010 also
    Check this one and let me know if there is anything else
    Edited by: Sikindar on Apr 8, 2009 8:34 AM
    Edited by: Sikindar on Apr 8, 2009 8:34 AM

  • PO with account assignment category K and use two cost center

    Dear Experts
    When I create a PO with account assignment category K and use two cost center in the account assigment tab of PO with the same GL or with different GL in the both line item, The FI document does not get posted.
    Any input on this please.
    Regards
    Paul

    Hi,
    Check in the PO document - Item level - Delivery tab
    There are two indicators
    1. Good receipt
    2. GR non-valuated.
    If you are giving only one cost centre, only GR check box active and  GR non-valuated check box is in-active. That's why System creating FI document during GR.
    If you are giving two cost centres, Both GR check box and  GR non-valuated check box are active. That's why System is not creating any FI documents during GR.
    Regards
    Ravi

  • Assign Cost center for Price differences

    Hi,
    How to assign Cost Centre as default Cost Center for Price differences on any account?
    Thank in advance.
    Swetha

    Hi Shwetha,
    Goto OKB9 and assign your cost element to Cost center.
    e.g. My price difference cost element is 60000 and cost center is 1234.
    goto OKB9.
    Company code,cost element and Cost center.
    1000                  60000                  1234
    If you have any issue with this,let me know i can help you.
    Thanks,
    Rau

  • How to set master cost center to required input in the maintaining position

    Dear experts,
             I have two questions in the HCM module,could you please tell me?
    Issue 1: How to set the column of master cost center to required input in the maintaining position screen?
    Issue 2: some of position has two cost center, i have maintained two cost center(cost center 1:90%,cost center 2:10%) percentage in the tab of cost distribution with trasaction code ppome.when i post to accounting,it only post to master cost center 100%,it can not distribute two cost center, Could you please tell me the reason?
    Looking forward to your reply.
    Best regards,
    Merry

    HI,
    Plz check with ur FICO Consultants as master Cost Center r desgined by them
    They will Loop group of Cost Centers to Master Cost Center.
    This concept has started in ECC 6.0 Version 
    Regards,
    Kiran

  • Override Company and Cost Center for FI Posting from HR Payroll

    Hello all. I have this scenario with a company that was merged into another and retroactive payroll occurs for absences and extra time in the "old" company, but the "old" merged company is closed so no postings can occur.
    I also found this unanswered post:  How to Override Company and Cost Center for FI Posting from HR Payroll
    We suppose that retroactive differences could be accounted in the new company code but I didnu2019t found any way to do it even in the BADI SMOD_PCPO0001 I couldnu2019t find a way to change the company code/cost center....
    Does anyone have dealt with the same problem? What is the solution?

    Amosha, thank you for your response.  Here is PCP0 that shows what I mean by 'header company code' that I don't see how to change (I re-ran pd 26 2008--bi-weekly payroll, btw):
    06/30/2009 Posting Document
    Run                      0000002791
    Company Code    0057
    Document            0000008174
    PostingCurrency  USD
    Reference           HRPAY00009
    Doc. Type            ZB
    Run Type             PP
    Posting Date        12/01/2008
    Documant Type   G/L Account Document   
    Document Date    06/30/2009
    Bus. Transaction HRP1
        There are error messages for this document
    Account Number with Text
    21301000   Accrued Salaries & Wages   CCTR 14515      ...
    20303998   HR P/R Doc Split                                               ...
    Messages for Document 000008174
    Error in document: HRPAY 0000008174
    The CO account assignment object belongs to company code 0001, not 0057
    Company code 0057 is now closed and has been merged into 0001.  Cost center 14515 in the above doc was populated by my clone of RPCIPE00 and call to my BAdI which retrieved current company and cost center from PA0001.  You can see from above that the 'header' data still shows 0057 and indeed, my version of RPCIPE00 only changes P_ITEM-BUKRS, P_ITEM-KOSTL and P_ITEM-SGTXT.  It looks to me that fm HRPP_TRANSLATE_FICO gets the 'header' company code afresh.  I was planning to leave WPBP-BUKRS (and all other Payroll data) alone (ie, not override company code).
    As for your other question, we post retros to /551 and /552. 
    Thanks again.

  • Best praxis for determining a  cost center for an HR org unit in PPM ?

    Hello all.
    We have defined the HR Org structure directly in PPM backend. Later the intention is that an interface should transfer this data from HR.
    The HR orgstructure defined works fine for the staffing process (with "resource manager via responsible organization"). 
    We have however run into some problems with the MLC & costing part.  The intention is to use manual MLC linking tasks/phases to PS WBS-elements (task based controlling).
    If we leave the org unit field blank in the cProject project project definition  we run into the message "No account assignment exists for the project defintion - no costing" and the systems rolls back from the assignment made.
    If we however assign an orgunit in the project defintion we instead get the message "No cost center could be determined for org unit 123...".
    <u>We therefore need to be able to determine a cost center for the Org Unit assigned to be able to proceed. How is this then best done?</u>
    There is a master cost center assigned to the orgunit in HR but not in PPM backend where this option does not seem to be available.
    With task based controlling the cost center does not really matter so it could possibly be hardcoded via a BADI (?) but is this really the way this should be done?
    Any suggestions?
    Thanks / Anders

    Hi and thanks for the reply.
    We will test with an ALE replicated structure so that the object ID becomes the same in the two systems as soon as possible.
    Pending that we will try the BADI option. Here I am however not sure what it is we really expect the BADI to do.  Which field should be populated with the cost center (the fields available are mainly project characteristics)?
    I also eventually found some information regarding this in the PPM 4.0 help.  I enclose info regarding this below.
    a) http://help.sap.com/saphelp_ppm400/helpdata/en/index.htm
    b) choose Collaboration projects>Accounting Integration>General Information about Accounting integration>Derivation of Organizational data.
    As I read this the system derives this as follows in case of task-based or role-based costing with no resource assignment:
    1) Look for the two BADIs mentioned to derive the cost center
    2) If no result there it looks for an org unit in the cProject header (where I assume having the Org Unit with the same Object ID in backend and ERP enables this option)
    3) If no result there the system looks for a "requesting cost center" in the account assignment object (WBS element or internal order)
    Regards / Anders

  • HOW TO CHANGE COST CENTER FOR AN INDIVIDUAL EMPLOYEE

    HI ALL
    I WANNA CHANGE A COST CENTER FOR AN EMPLOYEE WITH OUT CHANGING THE GROUP OR HIERARCHY
    CAN U HELP ME? .....................
    I TRIED THRU PA30,PA20 BUT COST CENTER FIELD IN GREY COULOUR.

    Hi,
    We can assing the CC in two ways.
    1. is for position.
    2. or for a Org unit.
    In your case if it is for Position. GOTO PP02 enter the details as
    Plan Version    HI
    Object Type     s
    Object ID       50018133
    Object abbr.
    Infotype        1001
    Subtype         A011
    Planning status 1
    Validity        06/23/2008  to     12/31/9999
    Data sample.
    Then goto change and change the CC. this will also updates the IT0001.
    If not, You can also change through Org unit.
    Where goto PPos_old> select the org unit> then goto staff assignments> select the required position> and there is a option called goto from top menu> there you can check accoutn assignment>  there you will get diff screen to be displayed--> there select the position if you want to change and select the option maste cost center and change the CC by giving dates, this will also updates the IT0001.
    Reward me if hleps.
    Thanks,
    Vasu.

  • Derivation of Funds Center from cost center for Asset PR/PO in FM

    Hello Experts,
    We configured new FM area and relevant BCS settings. It is working fine except PR or PO for Account assignment category A.
    Issue: system is not able derive funds center from cost center in the asset master. cost center is not updated in EBKN table for Asset PR.
    we have maintained the following;
    1. Funds center is activated in Asset account assignments
    2. Maintained derivation rule with function module: FMDT_READ_MD_ASSET
    3. Derivation rule for cost center to funds center also maintained
    If maintain funds center manually in PR it is working fine and consuming budget also.
    Requirement: How derive funds center from cost center assigned in asset. I have verified all tickets raised in this forum, but nothing has answered my question.
    Request you to provide solution for above issue.
    Thanks in advance for support.
    Regards,
    Chalapathi

    Hi Venkata,
    You have two derivation rules, first related to Asset function module and second one is related to CC and FC combination.
    You need to maintain the function module derivation rule first then you need to maintain the derivation rule related to combination of CC and FC. Because first you need to derive CC from asset master and then you need to derive fund center with reference to this CC.
    Regards,
    Ankit Agarwal

  • Select cost center for physical inventory difference posting

    Hello,
    While posting physical inventory differences (transactions MI07 or MI10) the choice of cost center is not offered. A default cost center is used by the system.
    Is there a way to choose the cost center for inventory difference postings? This is useful considering we have several inventories managed by several business units with different cost centers.
    Kind regards,
    Sergei Volkov

    this is from OSS note 13423:
    Symptom
    Key word: Inv acct assign
    No account assignment can be entered when posting inventory
    discrepancies.
    Additional key words
    MI07
    Cause and prerequisites
    This function is not implemented.
    Solution
    In Customizing an account assignment can be made for every inventory
    adjustment account. To do this the inventory adjustment account must
    first be defined as a cost element (Transaction KA01 / KA06):
    Accounting -> Controlling -> Cost centers -> Master data -> Cost element
    -> Create primary / secondary. Then an account assignment can be made
    for the cost element (Transaction OKB9):
    Tools -> Customizing -> Setup menu -> Accounting -> Controlling -> Cost
    centers -> Actual postings -> Automatic account assignment.
    If this account assignment is implemented every posting to the
    particular inventory adjustment account will automatically receive the
    appropriate account assignment.

  • Control G/L account and Cost Center for movement type 251

    Dear Friends,
    I would like to use mov. type 251 for GI for sale and like to control over G/L account and Cost center.
    The G/L account is by default from the valuation class of the the material and if the user will enter wrong G/L
    we had done the customising in OMJJ movement type 251 - Account grouping - Unchecked the check box of column
    "Check account assignment" - Impact is " the system always uses the G/L accounts or account assignments determined automatically"
    I also made default cost center for G/L account and plant wise through OKB9.
    Now I would like to suppress/dispaly the G/L account and cost center - for same I had done Setting in Entry control menu of OMJJ for 251 of field Account control - Value  - "-" field is suppressed. But it is not working.
    Please advise to solve this situation.
    Thanks & Regards
    Rajan

    Dear Rajan
    Yes, I have checked in MB1A earlier. We have separate node for Field seletion layout for Enjoy transaction MIGO for mvt type in which the G/L account (KONTO) an Cost center (KOSTL) have only optional or required entry selection.
    warm regards
    Ramakrishna.

Maybe you are looking for