ACC doesn't create duplicate.

I've read all the tutorials about how to make a custom ringtone. I am running the latest version of itunes. The problem is when I right click the edited song and select Convert to ACC, it shows that it's converting, but then no duplicate file appears. How do I fix this?

Sort the library by Date Added. The new file should be at top.
Or search by the song name and you should have a duplicate.
select Convert to ACC
That’s Convert to AAC.

Similar Messages

  • CUSTOMER_REL - Business partner not created; duplicate check on address

    Hello Colleagues
    I have a problem during CUSTOMER_REL replication from ERP to CRM.
    In r3am1 object looks fine but in some BDoc following error appears:
    Assignment person - address exists already
    Message no. AM038
    and the Business Partner for Contact Person is not created.
    We are on:
    SAP_ABA     701     0005     SAPKA70105     Cross-Application Component
    SAP_BASIS     701     0005     SAPKB70105     SAP Basis Component
    PI_BASIS     701     0005     SAPK-70105INPIBASIS     Basis Plug-In
    ST-PI     2008_1_700     0001     SAPKITLRD1          SAP Solution Tools Plug-In
    SAP_BS_FND701     0005     SAPK-70105INSAPBSFND     SAP Business Suite Foundation
    SAP_BW     701     0005     SAPKW70105     SAP Business Warehouse
    SAP_AP     700     0018     SAPKNA7018     SAP Application Platform
    WEBCUIF     00     0005     SAPK-70005INWEBCUIF     SAP WEBCUIF 700
    BBPCRM     700     0005     SAPKU70005     BBPCRM
    BP-CRM70     700V1     0000               SAP Best Practices for CRM 7.0
    BP-INSTASS     600V7     0000               SAP Best Practices Solution Builder
    ST-A/PI     01L_CRM5700000               Application Servicetools for CRM 500 51
    And have already applied
    1394635
    1396910
    1397895
    1410788
    1438046
    But it is seems problem lies on SAP_ABA as I have found note
    1092089 - Business partner not created; duplicate check on address
    which is valid for different BP role and
    SAP_ABA 700
    SAP_ABA 710 but not for our 701
    Have you ever seen similar issue?
    Thanks in advance
    Michal

    Hi Naresh,
    Thanks for reply. Correction instructions from this note refer to METHOD MODIFY_CONP_ADDRES which doesn't exist in crm7.0.
    I can see in CRM that contact person is replicated and is present in BUT000 but table BUT052 is empty for this contact.
    What is more we have implemented in our CRM note 564538  To change Contact Persons grouping replicated from ECC to CRM.
    But also have: Note 757955 - Incompatible change concerning CRMC_BUT_CALL_FU.
    We checked as well
    Note 609766 - Correction of BP GUIDS in CRMM_BUT_CUSTNO, BUT000, CRMKUNNR
    Note 836353 and run reports to find inconsistencies in tables BUT052, BUT051, ADCP and ADRVP. However no inconsistencies were found.
    Thanks in advance if you have any other idea.
    Cheers,
    Michal

  • ITunes creates duplicate tracks on its own

    Hello everyone,
    I noticed recently that iTunes is creating duplicate tracks on its own. The new “tracks” all reference to the same file. Sometimes there are up to 4 duplicates (see screenshot). As you can see on the far right of the image, it seems that every time I ran iTunes the tracks are added.
    I did not change anything recently, but noticed that iTunes also updates my Cover Art, even though I explicitly unchecked the checkbox the settings…might be connected to my issue.
    Any advice is much appreciated!
    regards
    modtastic

    Is the media folder stored on an external drive? If you start iTunes with an external disconnected it will "notice" and mark all tracks as missing. If you then add media by scanning folders it won't notice that it is already connected to the files and will add them again. Next time you start iTunes you can have two tracks linked to the same physical file.
    How do you normally add media to the library?
    To check your library for duplicates use Shift > View > Show Exact Duplicates as this is normally a more useful selection. Keep holding down shift until you have clicked on the text Show Exact Duplicates or it may still use the loser definition. If you don't see a menu bar press Ctrl+B to reveal it or Alt to show it temporarily.
    If you find that you have true duplicates you need to manually select all but one of each group to remove, or use my DeDuper script if you don't want to do it by hand. The script attempts to take account of different types of duplicates which need to be handled differently, merges playcounts and preserves playlist membership. Please take note of the warning to backup your library before deduping. See this thread for background.
    iTunes doesn't generally do much in the way of background media updates, but it may reveal those enacted by something else, such as Windows Media Player.
    tt2

  • Offset Path doesn't create a separate path

    Mac CS6
    Seems like my Illustrator is bugging out. When I apply offset path to the compound object Illustrator doesn't create a separate path for me, but both the offset and original somehow bundle together:
    https://www.dropbox.com/s/xiu3xqcictx0ku0/Offset_problem_1.png
    I'm trying to create an effect like this tutorial on youtube. But since offset path doesn't create a separate path, I can't duplicate the same effect.
    Any clue on how to fix this would be appreciated.

    Did you use the Object>Path method or Effects>Path method? Here's the difference

  • Discussion Forum, Forum doesn't create

    I am trying to use a Discussion Forum in my portal but in admin when I try
    to create a forum it doesn't create or post. I followed the directions in
    loading the components and both the user and the admin displays as expected.
    Discussion Forum works fine when I run it from the original sample.
    Thank you,
    temple

    Can you please delete my few duplicate replies in [CJ20n|Re: Long Text at Activity Level in CJ20N] thread?:-)
    Cheers,
    Amit.

  • Why doesn't my duplicate frame work in photoshop 2014?

    why doesn't my duplicate frame work in photoshop 2014?
    I draw a figure in frame 0 then duplicate frame. After the frame is duplicated I move the figure over to make sure there are different frames but as soon as I check the first frame Ive noticed that both frames have moved together. So nothing has changed. Why?

    I always create the individual frames in layer groups first. So build what you need, break them up or duplicate them, position them where you want them and then create your frames by turning off all the layer groups or layers you don't need.
    Here is an example of one of my layer pallets:
    Each scene is a frame and I turn them on and off as I need them.

  • Why do I keep creating duplicate shapes?

    I'm working on reconfiguring a tangram (a chinese puzzle). But when I attempt to move small shapes around the space, I'm creating duplicate shapes. This is frustrating because I had no problems do this earlier. Does anyone know why this is happening? Thanks.

    illustrator CS5 randomly  will start to copy images when I simply try to move why? i really need help!!!! i have this problem and it is driving crazy! i restart my computer more than 5 times during one hour,( i don't want to damage my computer just because of this!!! ) because illustratror keeps making copies the elements i want to move!!!!! i need to finish a project and i can't work!!!! i am desperated! any body has a good why of solving the problem? i did installed the new drivers of my wacom board as i readed here... but it doesn't work!!!! help...

  • ITunes Consolidation: Will it create duplicates of media files if they already exist in the new itunes destination folder but arent being referenced by the itunes library?

    I have a macbook pro from fall 2010. I have been using my external HD as my primary itunes folder for the past 7 yrs ( i.e it is organized by itunes default categorization, etc). However, there is some overlap between my external HD itunes folder and my comps original itunes folder (probably 20-30% of my current library's media files were already duplicated there from when i first bought the HD and transferred files to the external, however they are mostly referenced from the external now). Also there are files in the comp's itunes folder that are not on my external (probably due to organizational mishaps and podcast downloads when not connected to the external, etc). I do not know how many files this is the case for.
    Recently, i decided that i wanted to consolidate all of my itunes music into one concise folder on my macbook's HD to avoid these issues going forward.  I also just bought a new external which i will use to back up my comp's itunes folder once i consolidate everything to the comp. But i plan on using the itunes folder on the comp going forward or at least using the consolidate fcn to avoid these issues.
    Here is my dilemma. Prior to learning of the consolidate feature today, I changed the default itunes folder in settings to the original itunes folder on the macbook and then manually dragged all of the media files from my external itunes folder to the macbook's itunes folder. There were a ton of duplicates or overlapping folders with similar artist names, so i opted to have them merge all folders where possible. After doing this, i realized the itunes library still references these files that i dragged and dropped from the external since that is where my default itunes folder used to be. At that point i then read and learned of the consolidate itunes feature which seems like the best way to do this. But i am afraid that if i consolidate my library to my macbook's itunes folder now, will it create duplicates of the 4000 + media files i just dragged to the macbook's itunes folder which are already in the itunes library but being referenced from the old external??
    Question: Is there a way that i can make these files i just dragged to the macbook's itunes folder become the ones referenced by the itunes library through the consolidate feature without creating duplicates of these 4000+ files? I want to avoid having  three copies of these files (two duplicates in the itunes and the originals on the external). Furthermore, is there a best way to find out which files in the macbook's itunes folder are not being included in the library after consolidating everything to the computer's HD? Then after that, what is the best way to start backing this all up to my new external, so that this overlapping issue doesnt happen again?  Im assuming i just need to make sure to consolidate first when changing itunes folders going forward. Thank you. I know that was a lot  to read but hopefully someone can help with this issue.

    In general:
    - The best way to check if files are in a library is to drag the whole media folder to the library.  If something was missed it will be added.  If it is in the library is won't be added a second time.
    - If you have a second copy of a file and iTunes does not currently list that specific file in its database then even if it is identical to one already in the database it will add it a second time.  So if you have file xyz on the internal drive and the external drive and add them to iTunes you will end up with two entries for the same thing in iTunes because you really do have to copies of the files.  While this can happen with two copies on a single drive, it will almost definitely be the case when you have a copy of a file on two drives because iTunes really sees them as two different things.
    -Unless you know how iTunes works, avoid moving files yourself.  Let the consolidate feature do all the file moving.  Manually moving files can really mess up iTunes unless you know what you are doing and have iTunes set to not try to do it itself.
    - There's no clean and easy way to delete duplicates.  The best thing is to change practice so you don't create them.   Here are  references:
    How to find and remove duplicate items in your iTunes library - http://support.apple.com/kb/HT2905
    http://dougscripts.com/itunes/itinfo/dupin.php (commercial)
    Posts by turingtest2 about different types of duplicates and techniques- https://discussions.apple.com/thread/3555601 and https://discussions.apple.com/message/16042406 (Note: The DeDuper script is for Windows)
    http://www.hardcoded.net/dupeguru_me/

  • Does uploading iPhoto libraries from multiple Macs with the same photos create duplicates in the new Photos app?

    I have 4 Macs and I had the same iPhoto library on each of them. When I chose to turn on the iCloud Photo Library on each of them, each Mac, each one of them uploaded the library to iCloud Photo Library.. Now it appears that I have many duplicates in the new Library. Is it adding each of the 4 libraries to the mix? It's a real problem as I have 25,000 pictures - 70GB in my library. So paused the upload on 2 of the Macs about half way through in case it is creating duplicates, until I get some answers. Any help would sure be appreciated.

    I'm in the same boat as well. I'm doing one mac at a time and seeing how it works. Howev the upload is so slow, who knows when it will be done.

  • Error in creating Duplicate Database in same server..

    Hi,
    I am getting following error when creating duplicate database
    DB Version=10.2.0.4
    $ rman target sys/sys@test nocatalog auxiliary /
    Recovery Manager: Release 10.2.0.4.0 - Production on Mon Sep 28 15:13:32 2009
    Copyright (c) 1982, 2007, Oracle. All rights reserved.
    connected to target database: TEST (DBID=1702666620, not open)
    using target database control file instead of recovery catalog
    connected to auxiliary database: CLNTEST (not mounted)
    RMAN> DUPLICATE TARGET DATABASE TO "CLNTEST";
    Starting Duplicate Db at 28-SEP-09
    allocated channel: ORA_AUX_DISK_1
    channel ORA_AUX_DISK_1: sid=156 devtype=DISK
    contents of Memory Script:
    set until scn 597629461;
    set newname for datafile 1 to
    "/u01/data_new/clonetest/system01.dbf";
    set newname for datafile 2 to
    "/u01/data_new/clonetest/undotbs01.dbf";
    set newname for datafile 3 to
    "/u01/data_new/clonetest/sysaux01.dbf";
    set newname for datafile 4 to
    "/u01/data_new/clonetest/users01.dbf";
    set newname for datafile 5 to
    "/u01/data_new/clonetest/example01.dbf";
    set newname for datafile 6 to
    "/u01/data_new/clonetest/undotbs02.dbf";
    set newname for datafile 7 to
    "/u01/data_new/clonetest/alweb1.dbf";
    set newname for datafile 8 to
    "/u01/data_new/clonetest/indx1.dbf";
    restore
    check readonly
    clone database
    executing Memory Script
    executing command: SET until clause
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    Starting restore at 28-SEP-09
    using channel ORA_AUX_DISK_1
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 09/28/2009 15:13:40
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-06026: some targets not found - aborting restore
    RMAN-06023: no backup or copy of datafile 8 found to restore
    RMAN-06023: no backup or copy of datafile 7 found to restore
    RMAN-06023: no backup or copy of datafile 6 found to restore
    RMAN-06023: no backup or copy of datafile 5 found to restore
    RMAN-06023: no backup or copy of datafile 4 found to restore
    RMAN-06023: no backup or copy of datafile 3 found to restore
    RMAN-06023: no backup or copy of datafile 2 found to restore
    RMAN-06023: no backup or copy of datafile 1 found to restore
    RMAN> crosscheck backupset of datafile 1;
    using target database control file instead of recovery catalog
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: sid=154 devtype=DISK
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=/u01/rmanbkp/db_prd0akqcnoh_1_1 recid=10 stamp=698769169
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=/u02/data/flash_recovery_area/BINGO/backupset/2009_09_28/o1_mf_nnndf_TAG20090928T151044_5d114x0h_.bkp recid=17 stamp=698771444
    Crosschecked 2 objects
    RMAN> crosscheck backupset of datafile 2;
    using channel ORA_DISK_1
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=/u01/rmanbkp/db_prd0akqcnoh_1_1 recid=10 stamp=698769169
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=/u02/data/flash_recovery_area/BINGO/backupset/2009_09_28/o1_mf_nnndf_TAG20090928T151044_5d114x0h_.bkp recid=17 stamp=698771444
    Crosschecked 2 objects
    RMAN> crosscheck backupset of datafile 3;
    using channel ORA_DISK_1
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=/u01/rmanbkp/db_prd0akqcnoh_1_1 recid=10 stamp=698769169
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=/u02/data/flash_recovery_area/BINGO/backupset/2009_09_28/o1_mf_nnndf_TAG20090928T151044_5d114x0h_.bkp recid=17 stamp=698771444
    Crosschecked 2 objects
    RMAN> crosscheck backupset of datafile 4;
    using channel ORA_DISK_1
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=/u01/rmanbkp/db_prd0akqcnoh_1_1 recid=10 stamp=698769169
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=/u02/data/flash_recovery_area/BINGO/backupset/2009_09_28/o1_mf_nnndf_TAG20090928T151044_5d114x0h_.bkp recid=17 stamp=698771444
    Crosschecked 2 objects
    RMAN> crosscheck backupset of datafile 5;
    using channel ORA_DISK_1
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=/u01/rmanbkp/db_prd0akqcnoh_1_1 recid=10 stamp=698769169
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=/u02/data/flash_recovery_area/BINGO/backupset/2009_09_28/o1_mf_nnndf_TAG20090928T151044_5d114x0h_.bkp recid=17 stamp=698771444
    Crosschecked 2 objects
    RMAN> crosscheck backupset of datafile 6;
    using channel ORA_DISK_1
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=/u01/rmanbkp/db_prd0akqcnoh_1_1 recid=10 stamp=698769169
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=/u02/data/flash_recovery_area/BINGO/backupset/2009_09_28/o1_mf_nnndf_TAG20090928T151044_5d114x0h_.bkp recid=17 stamp=698771444
    Crosschecked 2 objects
    RMAN> crosscheck backupset of datafile 7;
    using channel ORA_DISK_1
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=/u01/rmanbkp/db_prd0akqcnoh_1_1 recid=10 stamp=698769169
    crosschecked backup piece: found to be 'AVAILABLE'
    backup piece handle=/u02/data/flash_recovery_area/BINGO/backupset/2009_09_28/o1_mf_nnndf_TAG20090928T151044_5d114x0h_.bkp recid=17 stamp=698771444
    Crosschecked 2 objects
    Thanks,

    Hi,
    RMAN> show all;
    using target database control file instead of recovery catalog
    RMAN configuration parameters are:
    CONFIGURE RETENTION POLICY TO REDUNDANCY 1; # default
    CONFIGURE BACKUP OPTIMIZATION OFF; # default
    CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
    CONFIGURE CONTROLFILE AUTOBACKUP OFF; # default
    CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
    CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET; # default
    CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
    CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
    CONFIGURE MAXSETSIZE TO UNLIMITED; # default
    CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
    CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
    CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
    CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/oracle/ora10g/product/10.2.0/db_1/dbs/snapcf_TEST.f'; # default
    Thanks,

  • How to make iTunes add a folder without creating duplicates?

    Hello,
    I have a PC running windows 7.  I keep all my music in one folder on a NAS device.  I am getting more and more fed up with Windows Media Player (WMP) and I would like to move to iTunes.  This move, however, appears to be as painful as using WMP.  Please help if you can.  I have used iTunes before so I have an existing music and video library and I also have a number of playlists both with music and videos.  I cannot afford to start from sratch, i.e., to remove and readd everything; it would be too costly.  I have two major problems with iTunes:
    1. When I try to add files that already exist in the iTunes library iTunes happily adds these file and creates duplicates.  I cannot find a knob that would prevent iTunes from creating these duplicates and simply ignore any found files if they are already present in the library.  All such duplicates point to the same file on disk.  I am really scratching my head over this as I would think that this would be a very basic thing to do/allow, yet it does not seem to be possible.  Is it me missing something simple here or is it Apple telling me that this is how it must be...???
    All I want to do is to add the top folder that contains all my music without having to deal with thousands of duplicates.  I cannot add the files one-by-one because there are too many of new files there and if I remove all the files and re-add them all my lists will likely become empty (tried it on one list and, as expected, the list got emptied once I removed the files that were in the list).  Hmm, is this asking for too much?  Please help.
    2. I do not seem to see a way to tell iTunes to monitor for new media files.  WMP allows you to specify folders to monitor.  You add a file to the folder and the file gets added to the library.  What is wrong or bad with this concept (other that it would not work if duplicates were handled)?  Why does iTunes not seem to support that?
    Thank you,
    Peter

    tt2, thank you for your reply.  Let me restate your answers the way I see them.
    Problem #1:  You said that "iTunes only creates duplicates if you ask it to...".  Well  my goal is not to create duplicates but to avoid them and the problem with iTunes is that it does not seem to offer an easy way to do this.   Do not get me wrong, I like iTunes but let's call black black and white white.  So the way I read your answer is: no iTunes does not support a way to add the same folder twice without creating duplicates. 
    Problem #2: The answer to the second question is also no, iTunes does not offer any way to monitor for new files in a folder or folders.
    I wish the above were incorrect but from what I hear and from what your wrote I conclude iTunes does not support any of that.
    You offered external to iTunes solutions for both problems.  Thank you for that!  I did not know about this tools.  Having said that my iTunes music files are on a NAS device (files not copied to iTunes library), my video files are on NAS but (because of the necessity to convert to iTunes supported format) they were transcoded and stored in iTunes library, my iTunes Store purchases (music) are in the iTunes library and on the NAS (backup - likely duplicates).  In short it gets messy very quickly and after reading the NAS and multi-path warnings for the DeDuper tool I am just not jumping on the idea of using it - there would be physical duplicates and I would not want any physical files to be deleted.  tt2, do you know if the DeDuper offers a mode where it would present the user with a list of duplicates and allow the user to decide which dups to remove before doing anything?  I basically would want to remove the dups from the library but without deleting any physical files.
    I will have a closer look at the iTunes Folder Watch program.  Unless I am misinterpreting something I think it should do what I want to do. 
    So again, thank you for your answers and suggestions with the external tools.  It is just too bad that iTunes does not support what I (and many others) need natively.
    Peter

  • How do I move/copy contacts from Entourage to iCloud Address Book without creating duplicates? Address Book on Mac, iCloud, iPhone and iPad is now empty

    How do I move/copy contacts from Entourage to iCloud Address Book without creating duplicates? Address Book on Mac, iCloud, iPhone and iPad is now empty

    Thank you for letting me know!
    Going to give it a go. Had a back up of all my clients files stupidly not my software as I have the originals disks. Just realised that amongst the software is ibiz and have lost al my accounting and billing files for the last 7 years want to cry so losing my contacts now will really tip me over the edge!
    Fingerscrossed this works!

  • Data loader : Import -- creating duplicate records ?

    Hi all,
    does anyone have also encountered the behaviour with Oracle Data Loader that duplicate records are created (also if i set the option: duplicatecheckoption=externalid) When i am checking the "import request queue - view" the request parameters of the job looks fine! ->
    Duplicate Checking Method == External Unique ID
    Action Taken if Duplicate Found == Overwrite Existing Records
    but data loader have created new records where the "External Unique ID" is already existent..
    Very strange is that when i create the import manually (by using Import Wizard) exactly the same import does work correct! Here the duplicate checking method works correct and the record is updated....
    I know the data loader has 2 methods, one for update and the other for import, however i do not expect that the import creates duplicates if the record is already existing, rather doing nothing!
    Anyone else experiencing the same ?? I hope that this is not expected behaviour!! - by the way method - "Update" works fine.
    thanks in advance, Juergen
    Edited by: 791265 on 27.08.2010 07:25
    Edited by: 791265 on 27.08.2010 07:26

    Sorry to hear about your duplicate records, Juergen. Hopefully you performed a small test load first, before a full load, which is a best practice for data import that we recommend in our documentation and courses.
    Sorry also to inform you that this is expected behavior --- Data Loader does not check for duplicates when inserting (aka importing). It only checks for duplicates when updating (aka overwriting). This is extensively documented in the Data Loader User Guide, the Data Loader FAQ, and in the Data Import Options Overview document.
    You should review all documentation on Oracle Data Loader On Demand before using it.
    These resources (and a recommended learning path for Data Loader) can all be found on the Data Import Resources page of the Training and Support Center. At the top right of the CRM On Demand application, click Training and Support, and search for "*data import resources*". This should bring you to the page.
    Pete

  • Error in VT04 - Doesn't create Shipments

    Error in VT04 - Doesn't create Shipments
    We have this function module that automatically creates delivery and shipment base from the Goods Receipt.
    The problem is it doesn't createe shipment document because the delivery doc doesn't exists.
    Upop debugging, the delivery has been created. And appends the delivery number into TVARV table (found in PERFORM CHANGE_VARIANT_VALUES). Then there's this code that it doesn't recognized the delivery that it was created.
    PERFORM CHANGE_VARIANT_VALUES USING VBKOK-VBELN_VL.
          SET UPDATE TASK LOCAL.
          SUBMIT RV56TRGN WITH P_OUT  EQ C_X
                         WITH V_PSEL EQ 'RV56LFSL'
                         WITH V_PSP0 EQ 'RV56TRSP'
                         WITH V_PTR0 EQ ZVXXAUTOGRDN-DATA_OPTS
                   AND RETURN EXPORTING LIST TO MEMORY.
          COMMIT WORK AND WAIT.
    Though in the production this program works. But in QA server it doesn't. I am not sure if this is the effect of a Unicode issue also.
    Help me guys.. I just couldn't find in program RV56TRGN on how the values will get from TVARV.
    I am not familiar with the command SET UPDATE TASK LOCAL. If this is related to Memory storage that might get the last value.
    Points will be given for the helpful ideas. Thanks!

    Hi,
    The service contracts guide also says to run 'Installed Base Interface' concurrent program for shippable items. Even after running this concurrent program no contracts is created.
    Any step to be done further??
    Regards,
    Nithya

  • Is there a way to replace tags on import rather than create duplicates??

    I use the tag engine to connect with the KEPWARE OPC server program and at times I want to change how the tags are located inside KEPWARE but keep the same tagnames inside LABVIEW. I export the .scf file and modify it inside EXCEL. When I import it again it will create duplicate tagnames. When you have 4000-8000 tags, it can take awhile to delete the duplicates. It would be great if we could replace the existing tag name data. Maybe I should be creating a vi to modify the properties of individual tags instead. How does anyone else work around this issue??

    I would export all of the tags and then modify the ones that need to be modified. Then, before I import them, I would create a new scf file. This way there are no duplicates.

Maybe you are looking for