Accd dep is not coming as a line item in Sale of Asset.
Hi Fi Experts,
The issue related to Asset a/cing.
I have configured everything in Asset a/cing, while doing the Sale of Asset (F-92), i suppose to see all the 6 Line items, but i am not getting the Accumulated dep one, cud u pls help me out, whts the mistake i have done or if i have missed any settings..
rgds
Raj.
Hi
In Asset Accounting Configuration , Assign GL Accounts-- AO90 , you must assign Accumulated Depreciation A/C for Ordinary Deprecaition and Expense A/C for Ordinary Depreciation.
If you double click on Depreciation you will get these fields which GL Accounts to be entered.
This will solve your problem.
Regards
Venkat
Similar Messages
-
Profit Center Not coming in Vendor Line Item in MIRO
Hi Experts,
We are facing one problem when we are posting miro in one plant profit center is coming in vendor line item in miro. But when we are posting miro with the same material code but with different plant same company code. But in miro vendor line item profit center is not coming.
What mistakes we have done in spro.
Kindly help me out.
Regards
GRHi
Normally vendor line item will not carry profit center, hence I think this is populated through some enhancements.
Hence you may need to analyze with the help of an Abaper.
Regards -
Ref. PO no. is not coming in second line item at the time of delivery
Hi All
STO Scenario
In PO it single Line item, but in delivery we doing split batch. the system showing error that " Enter the PO No." But in first line it it picking the Ref. Document No. while it not coming second line item.
Please suggest.
Regards
MaheshHi Mahesh
Proceed accordingly, first select te batch split by selecting line item and then go to environment for batch select once the batch selected then choose the belowmentioned magnifying glass, maintained other necessary field your delivery will be created. -
Provision that MRP is not be considered for specific line item of Sales Ord
Is their any provision that MRP is not be considered for specific line item of Sales Order in MRP run? (Ex: Planned order is also generated for free/ADC sample quantity entered in Sales order)
Dear
Go to Sales and distribution--> Sales --> Sales Documents -->Schedule Lines --> Assign schedule line categories.
Choose the item category (eg. TAN) which is coming in the sales order and enter CN - No. Mat. Planning in the the manual schedule line category (MSL Ca) for MRP type PD.
This will enable you to choose while creating sales order in the Tab procurement column SL Ca.
Choose CN - No mat.planning for the schedule items which you don;t want MRP.
Regards
Soundar -
FS10N balance not tie with FBl3N line item totals
Hi
I searched the forum for posting on FS10N and FBL3N incorrect balances and I did not any post appropriate for my issue. Hence I am posting my issue here.
For a particular month, say 072010, FS10N GL balance does not tie with FBL3N line item totals. I am not sure why. In our case, we did not archive any line items and this is not related to year end carry forward. Year beginning GL balances look fine. We dont have any negative postings. Only few GL balances are off. We are using 4.7 version.
Do you know why this inconsistency and how to rectify it? Is there any program which I run apart from Yead End carry forward?
any ideas really appreciated.
ThanksHello
We have already this trouble.
To correct it you need to proceed like this (when NewGL is not activate, with new Gl there is one new programm)
Without newGL
- Block account to be posted (transaction FS00 Block for posting in the company view)
- Delete open item, by using the programm RFSEPA03 (you need to adapt it by a copy because if you don't you can't run it), also this programm will unflag your account in the company view
- Delete line item by the standrd program RFSEPA04
- Create the line item by the standard program RFSEPA01
- if this account is managed by open item, run the programm RFSEPA02 (you need to do the same adjustement of the RFSEPA03)
With NewGL, there is something new. the program RFSEPA02 is linked with a new transaction and you don't have to adjust it FAGL_ACTIVATE_OP. The difference is when you create the open item, you have to define the default profit center and default value depending of the customizing of the leading ledger.
BBest regards
Philippe,
Thanks for the rewards. -
Not able to delete line items using BAPI_OUTB_DELIVERY_CHANGE
Hi,
Not able to delete line items of a delivery using BAPI 'BAPI_OUTB_DELIVERY_CHANGE', with thte below code and even return parameter has zero messages.
I have even checked existing below posting.
https://www.sdn.sap.com/irj/scn/logon?redirect=http%3a%2f%2fforums.sdn.sap.com%2fthread.jspa%3fthreadid%3d782509
Below is the code that i am using.........
*wa1-deliv_numb = wa_lips-vbeln.
wa1-deliv_item = wa_lips-posnr.
APPEND wa1 to item_data.
wa-deliv_numb = vbeln_so .
wa-deliv_item = l_item.
wa-del_item = 'X'.
APPEND wa TO item_control.
w_header_data-deliv_numb = vbeln_so .
w_header_control-deliv_numb = vbeln_so .
w_delivery = vbeln_so .
*w_header_control-dlv_del = 'X'. "Delete whole Delivery
CALL FUNCTION 'BAPI_OUTB_DELIVERY_CHANGE'
EXPORTING
header_data = w_header_data
header_control = w_header_control
delivery = w_delivery
TABLES
item_data = item_data
item_control = item_control
return = return.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'.
I have even tried uncommenting item_data parameter but not able to delete line item.....i am able to delete whole delivery but not line items .........can any one of u help me in resolving this issiue plz ???
Regards,
M, ManoharKindly use WS_DELIVERY_UPDATE to delete the items
Sample code:
L_VBKOK-VBELN_VL = vbeln_so.
clear l_vbpok.
refresh l_vbpok.
l_vbpok-vbeln_vl = vbeln_so
l_vbpok-posnr_vl = wa_deliv_item.
l_vbpok-lips_del = c_x.
append l_vbpok.
set update task local.
call function 'WS_DELIVERY_UPDATE'
exporting
vbkok_wa = l_vbkok
commit = ' '
delivery = lv_delivery
tables
vbpok_tab = l_vbpok
exceptions
others = 0.
commit work and wait. -
Document should not splitt to tax line items
Hi,
Document should not splitt for tax line items,currently it is happining how contol this.
Thanks and RegHi,
Then in the document splitting configuration, you can remove the base item category for this TAx Item Category.
Regards,
SDNer -
Condition type not appearing in PO line item
Dear All
I made a condition type Y001 for agriculture tax with below mentioned config. and marked as both header and item condition.
Cond. class A Discount or surcharge
Calculat.type A Percentage
Cond.category B Delivery costs
Manual entries C Manual entry has priority
Now problem is that when I am making contract in contract line item condition Y001 condition is appearing in dropdown and I am able to enter the same in contract and save it.But when I am trying to make a PO by referring the same contract with line item condition Y001, this same condition is not appearing in PO and also it is not appearing in dropdown also so that I can manually enter the same.
Please let me know why system is behaving like this.
Regards
SKsatish kumar wrote:
In short condition type Y001 is appearing in contract line item condition tab while making contract but same condition is not appearing in PO line item condition tab while making PO.
Hi Satish,
Perhaps you have not assigned the pricing procedure to the Purchasing Orgn & Vendor in IMG Schema determination. Have a chk once and if you have assigned try maintaining a PIR and I hope it should populate the priceing procedure and your cond type Y001 in the PO also.
Anything pls revert
Regards
Shiva -
Not able to display line item 20 in contract
I could not able to display line item 20 in the contract document.
line item 10 and 30is there however there is no line item 30. What could be reason and how to enable the same.
MRSIt may also possible if user forgot to enter the line item 20 and jump to line item 30 after 10 as below.
Then system will show as like this -
System should not allow to add line items in delivery
Hi,
1) system should not allow to add line items in delivery( in reference to sales order or STO)
2) sales order/STO should not be changed if delivery exists
how to control the above
AlecHi Lakxmi,
I found answer for 1st point from you are old answers.
can you throw somelight on 2nd point.
Thanks
Anil -
How to get Characteristic Values assigned to the line item of Sales Order?
Hi,
I want to get the Characteristic Values( Variant Configuration )assigned to First Line Item of Sales Order.
I was using the Fn. Mod.: VC_I_GET_CONFIGURATION_IBASE,
this fn. mod. giving all the Characters but not the assigned characteristic values.
Is there any other way to find characteristic values of sales order.
Thanks,
vinayak.
Message was edited by: vinayaga sundaramFor example, please see this example program.
It lists the characteristic names, the values, and the description of the values which are tied to a sales document.
report zrich_0001.
* Internal Table for Characteristic Data
data: begin of i_char occurs 0.
include structure comw.
data: end of i_char.
data: xcabn type cabn.
data: begin of xcawn,
atwtb type cawnt-atwtb,
end of xcawn.
data: xvbap type vbap.
parameters: p_vbeln type vbap-vbeln,
p_posnr type vbap-posnr.
start-of-selection.
select single * from vbap into xvbap
where vbeln = p_vbeln
and posnr = p_posnr.
clear i_char. refresh i_char.
* Retrieve Characteristics.
call function 'CUD0_GET_VAL_FROM_INSTANCE'
exporting
instance = xvbap-cuobj
tables
attributes = i_char
exceptions
instance_not_found = 1.
loop at i_char.
clear xcabn.
select single * from cabn into xcabn
where atinn = i_char-atinn.
clear xcawn.
select single cawnt~atwtb into xcawn
from cawn
inner join cawnt
on cawn~atinn = cawnt~atinn
and cawn~atzhl = cawnt~atzhl
where cawn~atinn = i_char-atinn
and cawn~atwrt = i_char-atwrt.
write:/ xcabn-atnam, i_char-atwrt, xcawn-atwtb.
endloop.
Regards,
RIch Heilman -
Add Line Item In Sales Order VA01
HI All,
I have new requirement in creation of sales order . Here we have free promotion sales . Here if customer buy one material then he will get some other material as free .In standard sap we can give only one line item as free not more than that .
Here our requirement is more than one line item . I suggested them maintain all the free materials in one Ztable when ever the original material will come for sales order then i have to fetch these materials from ztable automatically and it should create sales order. I started doing this using user exit FORM USEREXIT_MOVE_FIELD_TO_VBAP.
These are the below links i checked in our sdn.
Adding Line items to sales order on creation using User-Exit in VA01.
Please give me some idea on this .
Regards,
Madhu.Hi Asik,
Thanks for your reply.In my case i can not got for Bom because the schemes will change for every ten days. I think Bom creation will fill a lot of data but it wont solve my issue.
Regards,
Madhu. -
Delete the line item in sales order in VA01/VA02 when the quantity is modif
Hi SAP,
I have requirement to delete a line item in sales order.Please suggest me to do the same.
THe scenarios is , we are inserting a free good line item based on some condition and quantity, If the quantity is modified the free good line item inserted needs to be deleted.
Waiting for your responce
Thanks,
Billa
Moderator message : Spec dumping is not allowed,search for available information. Thread locked.
Edited by: Vinod Kumar on Nov 14, 2011 1:54 PMHi,
Can you also check the SALES LINE.
Sales line is the combination of SALES ORGANISATION + DISTRIBTION CHANNEL +PLANT.
Hope it was not maintained.
Transaction code : OVX6
PATH: IMG->ENTERPRISE STRCTRE->ASSIGNMENT>SALES AND DISTRIBTION->ASSIGN SALES ORG- DISTRIBTION-PLANT.
please revert if the error still exists.
santosh -
How to highlight the whole row of a particular line item of sale
How to highlight the whole row of a particular line item of sales order depending on condition?
Please help its urgent..
Looking forward your reply.
Moderator message: please do more research before asking, show what you have done yourself when asking, do not flag posts as "urgent".
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on Aug 9, 2011 9:30 AMAny ideas on what would cause this NOT to work? I added this row right after the table is created and populated and it is still not highlighted when I enter the form. The snippet of code that does this is:
MyTableModel modelS = (MyTableModel)dataModel.get("S");
jTable1 = new JTable(modelS);
jTable1.setRowSelectionInterval(0,0);MyTableModel is this:
class MyTableModel extends DefaultTableModel {
public MyTableModel(Object[] columnNames, int numRows) {
super(columnNames, numRows);
public boolean isCellEditable(int row, int column) {
if (TableKey == 'S') {
if (column == 6) {
return false;
if (TableKey == 'O') {
if (column == 0 || column == 4 || column == 5) {
return false;
if (TableKey == 'P') {
return false;
return true;
}Can anyone help? Thanks.
Allyson -
Mrp run on no of line items in sale order
hi all
i have a sale order with o line items include.
i want to run mrp on sale order only (not want to use MD50)
can i use user exit for this task ? if so please advise which user exit i can use ?
thanksDear,
Please refer this link,
[Mrp run on no of line items in sale order|Re: MD50 issue]
Regards,
R.Brahmankar
Maybe you are looking for
-
Aperture 3.2 will not install.
I am running Aperture 3.1.3. I cannot download nor open Aperture 3.2. Alert message says "Aperture 3.0 or later is required to install this update. Help please?
-
Financial reporting client for version 11.1.1.2
Hi all, A customer of mine would like financial reporting client. I can't find 11.1.1.2 on edelivery. I downloaded the one for 11.1.1.3 and I also have to include the installer for the assembly files to work. This is sure to beef up the file size! So
-
How to load a third party class
Hai all I have a ApplicationLifecycleListener class, in ths class am using a hibernate releated stuffs, which needs some classes to be preloaded. how can i preload these classes or how can i specify this to the weblogic server. and i have placed all
-
Hi to All I want to create the HTML page from my servlet. This is because i want to send the current page(brower) content as a email attachment. What is the easiest way to do this. Please help me.
-
Credit Card Processing Gif - while c/c is being processed
Hi guys, Really in need of some help here, most checkout systems have an animated gif that pops-up once you confirm your payment. The gif plays while the transaction is being processed and reaffirms the customer that the site hasn't bombed out but is