Accelerate PI Process (IDoc - XI - JDBC)

Hello all,
My scenario :IDoc from ECC6, JDBC with BPM and Acknowledgment back to R/3 after process.
But, it seems that the acknowledgment generate from XI is a little bit "slow" and not very constant. Sometimes times, it takes more time than others and i don't know why.
The process seems too long for my client, he needs more IDoc to be process in a minute and he doesn't want any serialization of processing.
I've read some tuning guide but i don't see where i can improve my scenario.
Is there any hints for accelerating this acknowledgement create from XI ?
Do i have to replace the standard acknowledgement by a specific Idoc which will be send at the end of my BPM ?
Hope i was clear.
Thanks by advance.
JP

please visit the fine tuning article
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/412290ec-0201-0010-0790-dfd946efc5f4

Similar Messages

Acknowledgment in IDOC- XI- JDBC

Hi,
I have a question I've got a process IDOC->XI->JDBC without BPM.
In BPM could I set "Acknowledgment" f.e. to Transport if I use a async sender.
Could I also use this option in a process without a BPM?
THX Matt

Hi Ajay,
thanks for your response message
The problem that I have is, on my QA System, I get akcnowledgment from Sybase DB - no problem.
But since we transport all the stuff zu Prod. System it doesn't work anymore...
What did you mean with "you have to create a listener in the sender side".
Thanks a lot
Matthias

Pass system ack of JDBC adapter to ERP in IDoc - XI - JDBC scenario

Dear all,
i have an IDoc -> XI -> JDBC scenario (without using ccBPM). In the standard way the ERP system, sending the IDoc waits for an application acknowledgement. However the JDBC adapter is only capeable to send system acknowledgements.
Is there a way to pass these acknowledgements to the IDoc status record?
In help.sap.com (http://help.sap.com/saphelp_nwpi71/helpdata/en/ab/bdb13b00ae793be10000000a11402f/frameset.htm) under "IDoc Processing with the IDoc Adapter " there is a table that maps XI system/applic acknowledgement to IDoc status. So in my opinion the status record of my IDoc should at least chenge to the corresponding status for the system ack.
Can anyone tell, if this is really working? What if I deactivate the acknowledgement request in the NOALE programm?
In any case, can I achieve to transfer the system ack to the IDoc status without using a ccBPM?
Many thanks and best regards
Florian

Is there a way to pass these acknowledgements to the IDoc status record?
Without BPM, No.
So in my opinion the status record of my IDoc should at least chenge to the corresponding status for the system ack.
The ack referred here is related to idoc status whether it is properly reached till XI or not and not related to the JDBC ack.
What if I deactivate the acknowledgement request in the NOALE programm?
Then u won't have any ALEAUD message at sender R3.
In any case, can I achieve to transfer the system ack to the IDoc status without using a ccBPM?
No
Regards,
Prateek

IDoc to JDBC and JDBC to IDoc Scenario

Dear All,
I am working on IDoc to JDBC and JDBC to IDoc Scenario.
I have to send Idoc from SAP to Non SAP system(.NET application) i almost configured in XI but still i don't know when my INTEGRATION will INVOKE how my data will proceed from IDOC to Oracle database(Through JDBC) and in case of revese how and when Data flow will start.
Does anyone have completed STEP by STEP scenario document for this?
How my Idoc will sent to XI?
How XI will pick up data from IDoc?
How XI will Convert data to JDBC and UPDATE in Oracle Database?
And i reverse case(JDBC to IDoc) when my INTEGRATION will INVOKE?
Where and When i can watch my process and data?
How can i test the whole integration?
I AM GETTING ERROR WHILE TESTING CONFIGURATION IN Integration Directory "Error while refreshing the XI runtime cache" and when i check this in SXI_CACHE it gives me error
"Unable to refresh cache "NO_BUSINESS_SYSTEM"
"Error during last refresh to cache"LCR_GET_OWN_BUSINESS_SYSTEM - NO_BUSINESS_SYSTEM"
Please solve all the above problems i will reward u points
thanks,
RP

Hi,
While we working on IDOC to JDBC interface..
We have to deploy JDBC Drivers?
Go through this links,
/people/varadharajan.krishnasamy/blog/2007/02/27/configuring-jdbc-connector-service-to-perform-database-lookups
http://searchsap.techtarget.com/tip/0,289483,sid21_gci1246926,00.html
To install JDBC driver follow the how to guide.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how%20to%20install%20and%20configure%20external%20drivers%20for%20jdbc%20and%20jms%20adapters.pdf
Configuration of JDBC Adapter for SQL Server
JDBC Driver = com.microsoft.jdbc.sqlserver.SQLServerDriver
Connection = jdbc:microsoft:sqlserver://hostname:<port>;DatabaseName=<DBName>
UserID and Password.
If the connection is not working find the correct port number.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40b92770-db81-2a10-8e91-f747188d8033
JDBC- X I - R/3 Scenario
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
Please check the driver path as mentioned below.
JDBC Driver : sun.jdbc.odbc.JdbcOdbcDriver
Connection:jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=//location of DB table.mdb;
No JDBC driver required.
Receiver JDBC scenario MS access - /people/sameer.shadab/blog/2005/10/24/connecting-to-ms-access-using-receiver-jdbc-adapter-without-dsn
follow this thread
Re: Problem when connecting to MS Access through JDBC Adapter.
SAP Note 850116 has details
/people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
Configuring the Sender JDBC Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/1d/756b3c0d592c7fe10000000a11405a/content.htm
Configuring the Receiver JDBC Adapter
http://help.sap.com/saphelp_nw2004s/helpdata/en/b0/676b3c255b1475e10000000a114084/content.htm
Idoc Reveiver adapter..
http://help.sap.com/saphelp_erp2004/helpdata/en/b9/c5b13bbeb0cb37e10000000a11402f/content.htm
Thanks,
Satya Kumar
/people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
Edited by: SATYA KUMAR AKKARABOYANA on May 8, 2008 5:51 PM

IDOC to JDBC scenario in case of Cost Element Group IDOC.

This is an IDOC to JDBC scenario.
The Cost Element Group IDOC is having different segments. The main segment E1COGH (1...unbound) is consisting of different subsegment like E1OGS (0...unbound) & E1COGV (0...unbound). The main segment (E1COGH) along with subsegments E1OGS & E1COGV) is occuring more that 1 times. I have to insert data into the table, which we can do in single rows (no hierarchy is possible in tables). I have used "use one as many" in message mapping. Now if E1OGS or E1COGV is repeating in a single E1COGH segment then we dont get any error. But if I duplicate the main segment then I am getting runtime exception.
Please suggest about how to map in this case.

In my scenario:
     E1COGH
     |
      -> E1COGS
         E1COGV
where     E1CGH -> Main segment
     E1COGS & E1COGV -> sub segment
E1COGH -> 1..unbound
E1COGS -> 1..unbound
E1COGV -> 1..unbound
At the target side I have created two Statement Structure (ie.Statement & Statement_1) . One for E1COGS (ie. Statement) & the other for E1COGV (ie. Statement_1).
Case 1 -> If E1COGS is present in the main segment E1COGH then it is mapped AS IS.
Case 2 -> If E1COGS is not present in the main segment E1COGH then it is mapped as blank.
This will be mapped with Statement & in the absence of E1COGS this Statement structure is SUPPRESSED.
Similarly,
Case 1 -> If E1COGV is present in the main segment E1COGH then it is mapped AS IS.
Case 2 -> If E1COGV is not present in the main segment E1COGH then it is mapped as blank.
This will be mapped with Statement_1 & in the absence of E1COGV this Statement_1 structure is SUPPRESSED.
All the elements of the segment E1COGH, E1COGHT & E1COGHR are replicated in all the rows for X (no. of occurance of E1COGS) + Y (no. of occurance of E1COGV).
While testing in Message Mapping, I am able to get the output as for multiple occurence of E1COGS & E1COGV in a single E1COGH.
But if I increse the occurence of E1COGH the it is giving the following error :
Runtime exception during processing target field mapping /ns0:MT_Cost_Element_Group_Response/Statement/DBtablename/access/GROUPNAME. The message is: Exception:[com.sap.aii.mappingtool.tf3.IllegalInstanceException: Too few values in first queue in function useOneAsMany. It must have the same number of contexts as second queue.] in class com.sap.aii.mappingtool.flib3.NodeFunctions method useOneAsMany[com.sap.aii.mappingtool.flib3.CollapseContexts@51197231, , ]
Please suggest how to map the occurence of E1COGH simultaneously with the occurence of E1COGS & E1COGV.

IDOC-XI-JDBC scenario, jdbc sent too slow

i have a IDOC-XI-JDBC scenario,
the problem is that near 5 Lac IDOC is sent to XI, each IDOC is processes by an instance of the scenario, and the sent to the Database is too clow...means 4000 records per hour,
can i configure the JDBC receiver adapter in a way, so that it becomes faster/more concurrent,

Hey,
First raise the issue to the DBA he might help resolve the ISSUE more efficently.
Secondly check in the JDBC adapter -> Adavance mode -> Disconnect from the data base after processing each message shouldn't be set.
Even check with Database Transaction Isolation Level -> default is value of the connected database.
<b>The isolation level determines how transactions running in parallel can influence each other</b>
http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/content.htm
Why not the other way around > Collect multiple idocs in a file restrict maxium number of idocs to required value then send the file ?
Stefan Grube Example:
/people/stefan.grube/blog/2006/09/18/collecting-idocs-without-using-bpm
if it is with bpm then collect multiple idoc with occurance change and send them.
<b>Cheers,
*RAJ*
**REWARD POINTS IF FOUND USEFULL <b>

Error in IDoc to JDBC scenario

Hi friends,
I am configuring an IDoc to JDBC scenario in XI.When I am testing the scenario in Test Configuration then it is getting processed successfully but when I am tseting the entire configuration then in sxmb_moni the following error is showing:
"Error occurred during back-routing Error in communication channel". Please help as I am unable to understand the error.
regards
Debansu

Hi Debansu,
Please go through the link it may help to solve your problem.
JDBC Adapter / Acknowledgements
Error in back routing Error in communication channel
Regards,
Sridhar Goli
Edited by: sridhar goli on Aug 11, 2008 11:35 AM

IDOC to JDBC scenario: Does INSERT command expect a result value?

Hello,
we have an IDoc-to-JDBC-scenario configured on our XI 3.0, which uses the INSERT command to put a dataset coming from R/3 into a SQL database. This works fine.
Now a trigger has been activated on the database, which sets a flag to each dataset after inserting.
Because of this a system error occurs in the Adapter Engine and I found in the AuditLog (logSQLStatement=true), that the INSERT command is processed correcty, but in the next step an error is shown up: 'SQLServerException. A result set was generated for update.'
Could it be, that the trigger returns a result value, which can't be handled on the XI ?
If yes, how can I solve this issue? I have read something about the different methods execute(), executeUpdate() and executeQuery(), but I don't know how and where this has to be configured...
Thanks in advance,
Juergen

Hi Upendra,
I got some more information from the database adminstrator:
He used the following command 'exec xp_cmdshell @ExportCmd , no_output'
whereas @ExportCmd contains the command.
With the no_output option, the xp_cmdshell does not return a recordset.
I hope this will be helpful to you.
Grtz,
Juergen

IDOC to JDBC scenario-IDOC settings

Hi all i m doing an idoc to JDBC scerio and i have configured the settings and trying to trigger an ido and see whether i am able to post the data into the Db or not but i cant see idocs in XI:these are the steps i follwed posted in earlier forums:
Create an RFC destination to XI in the sender SAP system using SM59
Create a transactional port to XI using the RFC destination created in the above step
Create a Partner agreement using transaction we20 in the sender SAP system
Create a logical system using transaction bd54 for the partner agreement created in the above step
Select an IDOC using transaction we19 and change the EDIDC header recipient port & LS name
Create an RFC destination to the Sender SAP system using SM59
Create port to sender system using idx1 in the XI system for the RFC destination created in the above step
Create Metadata in idx2 transaction..
I have done the above and trying to trigger an idoc in we19 by changing the control records...but my idoc is not getting triggered.
Did i miss any other configuration?Please guide me.
also my guess is that i might have missed something in my partner profile config,
i specified ordrsp msg type in o/b parameters,specfied the port,selected trasfer idoc immediatley option,specified process code..i guess thats about it
Am i rite?Am I missing something.
Thanks

HI Aarthi,
In WE19 while triggering Idoc, what are you getting ? ANy error..Is it created any Idoc number . If so go to WE02 and check the status ...
If Idoc is triggered and it is not reached into XI, then you can check in SM58 for the status.
TO cross check the configuration-
/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
Also check how to guide for Idoc scenario.
https://websmp106.sap-ag.de/~form/sapnet?_SHORTKEY=01200252310000071155&
Regards,
Moorthy

Idoc to jdbc scenario of sap xi

Hi All,
i want step by step procedure for developing idoc 2 jdbc scenario. Anybody have this scenario, please send me that.
Thanks & Regards,
Nagarjuna.

Hi
Have a look at these threads
/people/laxman.molugu/blog/2006/08/13/integration-with-databases-made-easy-150-part-1
Re: Idoc triggering from a transaction
Message Mapping - JDBC to IDoc
Re: JDBC - System/Application Acknowledgement
/people/michal.krawczyk2/blog/2005/09/01/xi-idoc-adapter--edidc40--demystified
Process Integration (PI) & SOA Middleware
**Reward points if helpfull**

Idoc to jdbc scenario problum in queue ?

hi experts
I am facing a problem in IDOC to JDBC Scenario (PI 7,1) . When i trigger the idoc first time it is inserting in to the data base . when i trigger second and third time struck in the queue .By default the quality of service it is taking EOIO,
My question is :
1. How to clear the Queue ? and is there is any method it automatically release the queue ?
2. How to change the QOS EOIO to EO .(i don't find any option at jdbc adapter level to give QOS ) ?
Thank You
G.Praveen Kumar

Hi,
>>1. How to clear the Queue ? and is there is any method it automatically release the queue ?
To Re-process Automatically
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
>>2. How to change the QOS EOIO to EO .(i don't find any option at jdbc adapter level to give QOS ) ?
For any Adapter, Receiver side QOS option wont be there. Sender side only will be available.
As soon as you trigger the Idoc from ECC, this will be sent to receiver in the Idoc generation order only
REgards
Seshagiri

Mapping Issue for IDoc to JDBC interface

Hi All,
I am having problem in implementing logic in IDoc to JDBC interface where I have to filter out E1WBB07-KSCHL = VKP0.
Source IDoc structure is like ->
E1WBB01(occ 0 -1000)
|-> E1WBB03 (occ 0-100)
            |-> E1WBB07(occ 0-1000)
                     |-> KSCHL
                          DATAB
                          DATBI
Now, For each KSCHL = VKA0 there should be a duplicate VKP0 record. From these 2 records only the VKA0 should get processed and VKP0 ignored.
Duplicates for VKP0 and VKA0 can be identified by identical DATAB and DATBI.
Suppose, in one E1WBB03 segment,there are 4 E1WBB07 segment having following values.
1: KSCHL=VKP0, DATAB=20102011, DATBI=25102011
2: KSCHL=VKP0, DATAB=26102011, DATBI=30102011
3: KSCHL=VKA0, DATAB=26102011, DATBI=30102011
4: KSCHL=VKP0, DATAB=01112011, DATBI=31129999
2 & 3 are duplicates. From these, 2 should get dropped.
As a result only 1, 3 and 4 should get processed.
How can I proceed with this..?...I have tried some work around but not able to do it successfully. Is a UDF required to compare DATAB and DATBI. If yes how it can be written.?
Thnx in advance,
Praveen.

chk below mapping:
change the context of DATAB, DATAB1 and KSCHL to E1WBB03 (right click-> context) in all the mappings shown below
1)
DATAB
------------concat-----sort----splibyvalue(value change)-----collapse context---TargetNode
DATBI
2)
DATAB
------------concat-----sortbykey \
DATBI                    /        \
KSCHL------------/                 \
----------------------------------------FormatByExample----sort-----UDF1----Target KSCHL
DATAB                                    /
----concat---sort--splibyvalue(value change)-
DATBI
3)
DATAB
---concat ( ; )-----sort-splibyvalue(value change)---collapse context--splitbyvalue (each value)--UDF2---TargetDATAB
DATBI
4)
DATAB
------------concat ( ; )-----sort----splibyvalue(value change)-----collapse context--splitbyvalue (each value)--UDF3---TargetDATABI
DATBI
UDF1: execution type : all values of a context...input: var1
int a=var1.length;
int count=0;
if(a>=2)
for(int i=0;i<a;i++)
if(var1<i>.equals("VKA0"))
count= count+1;
else
result.addValue(var1[0]);
if(count>1)
for(int i=0;i<count;i++)
result.addValue("VKA0");
UDF2:execution type: single value...input: var1
String [] temp= var1.split(";");
return temp[0];
UDF3: execution type: single value...input: var1
String [] temp= var1.split(";");
return temp[1];

IDOC to JDBC - mapping test versus actual run

Hi
When I test the message mapping for the idoc-to-jdbc sender scneario, where one sales order idoc has multiple line items in segment E1EDP01, the statement => access structures repeat properly for 2 line items. Here I am giving the idoc xml file (data file) in the payload in the test tab of message mapping)
However in the communication channel log (with sql statement log = true), when I try to process an actual idoc from ECC, in the sql log of the processed message, I can see an insert statement only for the first line item of the sales order.
Please can somebody guide me as to what must be the problem?
Statement occ is 1.
tablename occ is 1.
Access structure occ is 0...unbounded.
The segment E1EDP01 is currently mapped to acess node.
The sales order number is repeated over the 2 line items using below mapping -:
E1EDP01 (with context as root) => "useasmany" => split by value => Item no.
Please advise.

Hello Gary,
Make the statement 0..unbounded or 1..unbounded then make the access 0..1. One statement is needed per action
http://help.sap.com/saphelp_nwpi711/helpdata/en/44/7c24a75cf83672e10000000a114a6b/frameset.htm
If the statements are so complex, you can also opt to use SQL_QUERY instead.
http://help.sap.com/saphelp_nwpi711/helpdata/en/44/7c24a75cf83672e10000000a114a6b/frameset.htm
Hope this helps,
Mark

Very strange error : IDOC to jdbc scenario

Hi
I am getting a very strange error when I see the log for the idoc to jdbc scenario that I am building.
The mapping test shows the header record and line item record properly in the mapping result.
insert, access nodes, fields with access nodes are all formed correctly.
However the communication channel log shows below error.
Could not execute statement for table/stored proc. "tblTestItem" (structure "Item") due to com.microsoft.sqlserver.jdbc.SQLServerException: Incorrect syntax near ')'.
JDBC Message processing failed, due to Error processing request in sax parser: Error when executing statement for table/stored proc. 'tblTestItem' (structure 'Item'): com.microsoft.sqlserver.jdbc.SQLServerException: Incorrect syntax near ')'.
The message status was set to WAIT.
The query that I see in the log is :INSERT INTO tblTestItem () VALUES ()
However mapping tool shows that all nodes are correctly formed.
Please assist.

Hi
I am still getting this issue even after the below steps so kind of stuck - actually very much stuck.
1. Restart of the dev environment
2. Tried with a new extension of the idoc
In the communication channel log for the JDBC receiver channel I still see
INSERT INTO tblItem () VALUES ()
The payload that I see in the message content tab is as follows
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_XXX_XXXX xmlns:ns0="http://capita.com/pi/XXXX">
- <Statement>
- <dbTableName action="INSERT">
<table>tblItem</table>
</dbTableName>
- <access>
<InvoiceNo>0000000009293467</InvoiceNo>
</access>
</Statement>
</ns0:MT_XXX_XXXX>
How do I debug the jdbc adapter to see how it converts the above xml output from the mapping step (note that this output is from an actual run and not test tool) to a sql query.
Very strange that the column names are present in the target payload but it is not reflecting in the query.
I have other tables being populated with the same jdbc receiver communication channel which makes this more and more confusing.
PLEASE ADVICE.

Need information regarding IDOC to JDBC Scenarios.

Hi,
Kindly help me with the pre-requisites inorder to start with a scenario of IDOC to JDBC and also the scenario of JDBC to IDOC.
Regards,
Sreedhar, Av

Hello Sreedhar,
While we working in JDBC or JMS Adapters we should deploy the Drivers..
Go through this links,
/people/varadharajan.krishnasamy/blog/2007/02/27/configuring-jdbc-connector-service-to-perform-database-lookups
http://searchsap.techtarget.com/tip/0,289483,sid21_gci1246926,00.html
To install JDBC driver follow the how to guide.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how%20to%20install%20and%20configure%20external%20drivers%20for%20jdbc%20and%20jms%20adapters.pdf
Configuration of JDBC Adapter for SQL Server
JDBC Driver = com.microsoft.jdbc.sqlserver.SQLServerDriver
Connection = jdbc:microsoft:sqlserver://hostname:<port>;DatabaseName=<DBName>
UserID and Password.
If the connection is not working find the correct port number.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40b92770-db81-2a10-8e91-f747188d8033
JDBC- X I - R/3 Scenario
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
Please check the driver path as mentioned below.
JDBC Driver : sun.jdbc.odbc.JdbcOdbcDriver
Connection:jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=//location of DB table.mdb;
No JDBC driver required.
Receiver JDBC scenario MS access - /people/sameer.shadab/blog/2005/10/24/connecting-to-ms-access-using-receiver-jdbc-adapter-without-dsn
follow this thread
Re: Problem when connecting to MS Access through JDBC Adapter.
SAP Note 850116 has details
2) While we working in IDOC Adapters we should do ALE Config of IDOC Settings .
Do these configurations in R/3 and in XI...
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
Here in IDOC to JDBC interface we need not to config sender Adapter..
1) The main usage of a sender adapter is to convert the input format into the XI supported XML format.
Once the conversion is completed the sender agreement appends the header with the sender details.
In case of these adapters we wont require sender agreement and sender communicationchannel for the
following reasons.
Sender agreement is associated with a namespace when we shoot an idoc frm r/3 if already contains its standard sap namespace. so those is need of sender agreement
The sender communication channel use is to identify the sending system and adapter, as the idoc header contains the details there is no need to sender.
These adapters resides on ABAP stack here the integration server takes care of IDOC/HTTP to XML conversion without requirement of adapter.
The business system that is sending the adapter has already been assigned to a techinical system which normally acts as an integration server...
IDOC to xi links
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
Hope this explanation is useful to u..
Thanks,
Satya Kumar
Edited by: SATYA KUMAR AKKARABOYANA on Jun 3, 2008 9:57 AM

Accelerate PI Process (IDoc - XI - JDBC)

Similar Messages

Maybe you are looking for