Accept Certificate Fingerprints for all remote controlled WS

Frustrating thing is that one has to accept the certificate for each and every remote controlled PC.
One of our hotline guys got a new Harddisk (no roaming Profile) and all started from beginning. So I found a solution: I exported the registry from HKEY_CURRENT_USER\Software\Novell\ZCM\Remote Management\Viewer\Settings\DeviceFingerprints from another PC and imported it for the user on the new PC. OK everything working again without any question "Accept this certificate ...".
So I created a bundle with the following Launch Script Action and assigned it to all of my helpdesk users:
reg export "HKEY_CURRENT_USER\Software\Novell\ZCM\Remote Management\Viewer\Settings\DeviceFingerprints" \\Srv1\Vol1\Dir1\DevFngrPrnt%COMPUTERNAME%.reg
copy /y \\Srv1\Vol1\Dir1\DevFngrPrnt*.reg \\Srv1\Vol1\Dir1\AllDevFngrPrnt.reg
reg import \\Srv1\Vol1\Dir1\AllDevFngrPrnt.reg
So with every launch all Fingerprints get exported and all the other users will import all of them. But still at least one Admin need to permanently accept the certificate.
Of course there are a lot of duplicates since each user exports the same Fingerprints. But the import takes care of it and just leaves one fingerprint for each device.
My QUESTION now: Where can I extract that Fingerprint directly from all the remote machines distribute it to all Hotline users? I did not find the source of it.
Thanks Klaus

BachmannK,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

Management tools for Zenworks remote control

Dear all,
Is there any management tools for Zenworks remote control operation, instead of login to Zenworks Control Center Console?
Thanks!!!

Manng228,
not at this time, other than http://www.novell.com/documentation/...n.html#bcfrhhy
Shaun Pond

Which encryption for the remote control of zenwork use?

Which encryption for the remote control of zenwork use?

Well, score is now 2:100, but it ain't over until the fat lady sings... :)))
Denis
"Marcus Breiden" <[email protected]> wrote in message
news:fgav7820vql0$.[email protected]..
> On Thu, 19 Apr 2007 06:42:55 GMT, Shaun Pond wrote:
>
>> oops, my mistake - as far as I know it's proprietary
>
> mark that in the calendar Denis!!
>
>
> --
>
>
> Marcus Breiden
>
> If you are asked to email me information please change -- to - in my
> e-mail
> address.
> The content of this mail is my private and personal opinion.
> http://www.edu-magic.net

Need app for ios remote control car

What app is used for the Remote Control Car BMW X6?

Only if yo have a compatible copy on your computer or in a backup of your computer files.
This
App Store: Install the latest compatible version of an app
Only applies to iOS 4.2.1 and later.

TS1741 what is battery number for the remote control for apple TV

What is the battery number for the remote control for apple TV

Hello,
should be CV2032 or BR2032.
Hope that helps.
Cheers

Looking for G550W remote control

Anybody have a remote control for the G550W system? I need to buy one. Contact me with an price. Thanks.

Hi cunsolo71,
Please check the list of universal remotes in the link below.
http://store.sony.ca/remotes/cat-31-catid-All-TV-Remotes
Thanks,
>Joffrey
If my post answers your question, please mark it as "Accept as Solution"

Best practice for using remote control under limited rights?

Hi. We are getting ready to take admin rights away from our users and make them standard users. We plan to utilize Zen for most of our in-scope applications so that we can allow users to install supported software. There is usually no problem in that case because Zen can elevate to System access during the install. However, we know that there are applications out there that a user may want to install that is not packaged in Zen. Also, in the event that a system setting needs to be changed, we will have to have a method for supporting this. In either case, the user will call our help desk. Unfortunately, the user will not have enough rights to do the install or system change even if the help desk associate remote control's the PC. What is the best practice to handle this situation in a Netware/Zenworks environment where users only have limited access?
I was thinking of three possibilities:
1.) The obivous one is to send a technician over to log in using local admin credentials to install the software or perform the change. (Drawback - not very efficient because a desktop tech would have to get over to the user's PC to perform the work)
2.) Have the help desk engineer log out of the machine through remote control, log back in as local admin to install the software or perform the change. (Drawback - not very convienant and time consuming.)
3.) Have the help desk engineer use the "run as" command or even create a Zen application object that could be executed to provide temporary rights for installing software or making system changes. Aaron Margosis of Microsoft writes about this quite a bit in his blog Aaron Margosis' "Non-Admin" WebLog : Table of Contents (Aaron Margosis' Non-Admin WebLog) (Drawback - some software or settings will not work properly using this technique)
The last one that I didn't list was creating a new application object. I did not factor this one in because this isn't always applicable to system changes and we really don't want to be making app objects for every out of scope app that exists in the user community. We typically only make them for widely used and supported apps.
Your feedback is appreciated.
Thanks

Originally Posted by spond
Joshbilsky,
how about
4) use the remote execute option to remotely launch an app as admin?
Shaun Pond
That's probably an option that we will make available. I wasn't sure how some things will work under the SYSTEM context vs local admin.

How to set Menu and Title functionality for a remote control in a menu?

I have a main menu (countries) and under each country there is a submenu (regions). When I play my DVD on my Mac it seems to function alright:
If I go to country C and hit the "menu" button, nothing happens (I see the "action prohibited" line popping up). And nothing should happen of you hit menu in a submenu. Only if you hit Title/Top menu you should be able to go to the main menu.
However... When I play my DVD on a DVD player (and I tested it on 2 different ones) and I go to a the Country C and hit the "menu" button, I am suddenly transfered to Country A. And if I go from the main menu to Country D and I hit the "menu" button, I go to... Country A. The menu button seems to be linked to the first submenu. Which is very odd!
So there is definately something going very wrong when using the menu/title buttons during playback when I am in a submenu (not while playing a track).
Can someone help me? Is there a way to define what happens with the remote control buttons menu or title when you are in a submenu and NOT playing a track? I can not find any controls for that.
Thanks!

Does this mean I should select "not set" in the general tab at the dropdown menu's for Title, Menu and Return in the Remote Control section? I can't find any other place where I can select menu or title.
But if I set these to "not set",the menu and title buttons still work in simulation mode... So I guess I should do something else in order to disable menu and title? Sorry for the amount of questions from my side!

IPhone 3G - No support for wired remote controls?

I have been looking all over the place for a wired remote for the iPhone 3G with no luck (and yes I have looked through this forum for an answer before asking my question).
I have attempted to use three wired remotes from my previous iPods, but two of them do not work at all and the third is completely unreliable. It is an Apple branded wired remote for the iPod video with similar design to the iPod Shuffle and allows you to connect your own headphones. It will only function after a hard-reset of the iPhone 3G, and strangely it takes about a minute or two for the buttons to work. If I unplug and replug the remote it will no longer be recognised and will not work again until the iPhone 3G is restarted.
I cannot see any wired remote products in the Apple store and I keep getting blank stares whenever I take this question to sales persons.
I use my iPod extensively and the only reason I bought an iPhone 3G was because I was tired of missing calls whilst listening to mp3s. I consider the wired remote as being essential for satisfactory use when out running, driving the car, etc. Without it the iPod functionally is all but useless to me.
Is there a wired remote that the iPhone 3G supports?
Additionally, are there any iPhone 3G compatible bluetooth devices that essentially perform the same function and allow you to attach your own headphones?

I've been looking for a decent remote for exactly the same reasons since I bought the 3g iPhone on release day. I settled for the Griffin SmartTalk as it allows you to answer calls, play / pause and skip (forward only meh!). Its cheap as chips (and it looks and feels as such) but it kinda does the job. Still waiting for a decent remote though. And A2DP for crying out loud! Its been long enough already. Then I could get this... http://www.foneshop.com/accessories/description/2486
which I feel is the best solution I've seen!

Looking for a remote control for powerpoint on ipad2

Using DocumentstoGO on the ipad2, looking for a method to progress powerpoint slide shows

For sharing between iPads, this might be worth a look:
http://www.ideaflight.com/
Cisco has a WebX application for the iPad that says it allows scheduling, hosting, and attending meetings. There is a client for GoToMeeting for iPad, but I believe that you can only attend, not host.
Regards.

Girder plugin for FX-5600 IR remote control

Ok, the plugin for Girder it's here, thanks to gumidek, the developper!!
Here is the link:
http://sweb.cz/j.tuma/MSIRemote-1.0.zip (it's very slow but only 260k)
Now, we can use the remote control with ANY program (winamp included ) ) )
For those who still don't know much about Girder:
http://www.girder.nl
Here is the thread in the Girder forum that "born" the plugin:
http://www.girder.nl/phpBB2/viewtopic.php?t=4857
Now I'm working to make a "general" .GML file to launch and control different usual applications.
Gumidek is THE MAN ! )
Costin

Quote
Originally posted by blubix
Hello to everyone.
I have lately bought FX5600-VDTR128. Card works fine, but when i installed MSI Media Center II i was woeful.
From MSI page i downloaded remtctrlsdk.exe and after some test i decided to develop my own program for using remote controler.
After some part of code i was wondering about memory usage.
Some observation showed memory loss (8kb per second, reading remote data one per 50 milisecond).
After some program diagnostic MEMPROOF showed memory loss inside RemtCtrl.Dll. Probably some pointers are not freed during remote data read.
Some users have problems with girder with plugin. This application works fine. The problem is inside RemtCtrl.DLL
I have three questions for MSI Support or forum users.
1. How to prevent memory loss?? I tryed to free library and handles, but it didn't work. Only termination of application get an effect.
2. Have anoyne correct version of RemtCtrl.Dll?? I know there are two version of this library delivered on CD's, but only one is working - (with memory leak).
3. When new version of this library or SDK package will be released??
Greetings to all forum users!
could you give me a link to the exact page from where you downloaded "remtctrlsdk.exe"? as I`d lyke to download it too.

Manual for remote control

Where can I get a users manual for the remote control and the DVR features? I don't need help with programing to control my TV. I want to know about the features, menues, how to use the favorites, etc.

what is displayed as the answer - where can I get a manual for my dvr - does not address the X1 equipment I received yesterday. The remote is completely different from what is shown in the manual displayed - must be an older model, and the dvr is also completely different. Does anyone know whether these manuals are available at a Comcast center?

Software needed for Pavilion dv2201ca web cam plus remote control function

HP Pavilion dv2201ca - Windows Vista Home Premium 32-bit
Replaced hard drive and reloaded software using System Recovery DVD and downloaded SP-1 and SP-2.
The web cam and the remote control features do not function after installing the above software and using online updating for the installed software.
Can someone please direct me to a link that will provide the proper web and remote software?

Didn't find the soft pac for the remote control installation, just instructions for using the TV functions. On a separate forum I found a reference to " sp40139 " to resolve the remote control problem on a different operating system. I downloaded the file (29Mb) but was afraid to install it for my 32 bit Vista Home Premium OS. If I could find the link to the location where this soft pac was located, I could probably find the correct one.
My computer dv2201ca is probably of Canadian origin ..... would there be a different support site for this?

Remote control (media) for Pavilion G6S?

Can you recommend for a remote control (media) for Pavilion G6S?

Hi
> I didn't found any driver for the A500 anyway, even for Vista...
It looks like the A500 is very new on the market and I believe the drivers (Vista) will be released in the next time
You will have to wait a little bit
I think that the Vista driver would be compatible with the Win 7.
I have installed Win 7 on my notebook and most of the vista drivers are working.

DTT 3500 - Looking for remote control

Could anyone help me finding for this remote control, I have damaged mine!
Thank you for your tips.
Cheers.

Hi super_user,
You may check this link for the compatibility of headsets for your Asha and Lumia phones.
Aleisha11

Accept Certificate Fingerprints for all remote controlled WS

Similar Messages

Maybe you are looking for