"Accept connection request from MyComputerName" ev...
Hi
I've successfully setup Nokia PC Suite to synchronize with my N95 via Bluetooth.
However... after upgrading my N95 to the latest firmware, I now get the following question on the phone every time PC Suite tries to synchronize:
"Accept connection request from MyComputerName?" Yes/No.
I have to answer Yes to synchronizes.
How can I configure the phone to trust my PC?
/Thomas
It's the same with all paired bluetooth devices (your PC, your headset, etc). Go to the "paired devices" tab under Bluetooth on your symbian mobile, select the device and "set as authorised". Works for all N and E series phones. For pairing with computers, you shouldn't need to do anything extra on the PC side.
Message Edited by dkk0 on 03-Jan-2009 03:00 PM
Similar Messages
-
I cannot send/accept freind requests from Game Center.
I cannot send/accept freind requests from Game Center.
I am able to sign in and everything works except the Freinds tab. It just shows loading??What setting did you change?
Is the Restrictions that prevents adding friends set in Settings>General>Restrictions? -
8600plus (OS X) will not accept print request from the registered add at hpconnect
HP 8600 plus OS X, will not accept a print request from the registered address at hpconnect but will print a request from the address that comes on the printer. I have tried to change the factory settings and i get a message from Hp connect that there is a printer error.
Hi Bill,
Bit of a strange error, I would recommend calling HP's team - they helped me out with my printer, and were very good:
HP Connected
ePrint
Instant Ink
Scheduled Delivery / Printable with automatic printing 855-785-2777 8am - 11pm EST Mon. - Fri.
10am - 6:30pm EST Sat.
U.S.: English (from link http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1)
*** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. *** -
How do i accept a request from pin blackberry messanger
i had a request for the blackberry messenger service which a friend sent but nothing has come on the program to accept he enter my pin number in the add a contact and i not recieved anything also i done same to his pin and its showing as pending
Solved!
Go to Solution.First make sure that you can send back and forth PIN to PIN messages to each other.
When they add you as a contact you'll get a message that someone wants to add you as a contact and that you need to approve it.
To add a contact to the BlackBerry Messenger Contacts list, complete the following:
On the BlackBerry smartphone, open BlackBerry Messenger.
Display the menu and click Add a Contact. The Select Address screen appears.Add a contact from your address book by clicking the contact name. Or, add a new contact by selecting Use Once, entering the contact email address and clicking the trackwheel. The contact email address is added.
Display the menu and select Request Email<user_name>. The Add a Message screen appears.
Click OK. The Add a Message is sent to the contact. You may customize this invitation before sending it. The contact is added to your contact list once the invitation is accepted.
http://www.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB12319&slic... -
Airport Extreme won't accept password request from DirecTV wireless adapter
My Airport Utility is running on PC (Windows XP). The DirecTV wireless adapter "sees" the network, and I get to the password screen but it can't get the password approved by Airport. Anyone know a fix?
I've already updated Firmwear, rebooted everything, etc. Other wireless things working fine including new setups, so it's not the router unless I need to change some settings
Thanks, Martywyhoser, Welcome to the discussion area!
Are you by chance using WPA or WPA2?
WPA: You can use WPA if you upgrade your iBook G3 to OS 10.3. See KB 107795, AirPort Card: When You Can Join a WPA Network.
WPA2: Sorry, but the iBook G3 can not join a WPA2 protected network. You will need to drop back to WPA or WEP. -
Every 2nd request from WTC fails
Hi there,
We are using WLS 10.0.1 integrated with Tuxedo 6.5 and have this strange situation where every second request sent from WLS to Tuxedo fails with "TPESYSTEM(12):0:0:TPED_MINVAL(0):QMNONE(0):0". There is no other associated message.
Our call sequence consists of:
ApplicationToMonitorInterface connection = tuxedoConnectionFactory.getTuxedoConnection();
Reply reply = connection.tpcall(requestMapper.getServiceName(), requestMapper.getTypedFmlBuffer(),
ApplicationToMonitorInterface.TPNOAUTH | ApplicationToMonitorInterface.TPNOTIME);
process reply
connection.tpterm();
The tpcall is throwing a TPException on every second invocation. The amount of time (seconds or minutes) that passes between invocations seems to be irrelevent. I've tried various combinations of flags passed to the tpcall, including zero, with no apparent difference.
I turned up WTC logging to try and troubleshoot the issue. Log fragments are pasted below.
Note that the same reader thread "ExecuteThread: '4'" appears to be used for both calls, suggesting that they are both making use of the same TCP connection.
A tcpdump of both calls reveals (apparently complete) outgoing request and incoming reply data in both cases. However, it looks as though WTC gets its input stream out of sync and (possibly) reads left over data from the 1st call. WTC ditches the connection when the 2nd call fails, so the 3rd call starts off with a brand new connection again.
Any ideas?
Please excuse the bulk, but here is the trace from the successful call:
ExecuteThread: '1'<BEA-180046> <[/TuxedoConnection/TuxedoConnection/>
ExecuteThread: '1'<BEA-180046> <no transaction>
ExecuteThread: '1'<BEA-180046> <]/TuxedoConnection/TuxedoConnection/30>
ExecuteThread: '1'<BEA-180046> <[/TuxedoConnection/tpcall/GSM_GetAcct/32>
ExecuteThread: '1'<BEA-180046> <[/TuxedoConnection/getProviderRoute/GSM_GetAcct>
ExecuteThread: '1'<BEA-180046> <[/WTCRouteManager/selectTargetRotes/GSM_GetAcct>
ExecuteThread: '1'<BEA-180046> <[/WTCService/getImport/(svc = GSM_GetAcct, xid = null)>
ExecuteThread: '1'<BEA-180046> <[/TDMImport/getStatus/>
ExecuteThread: '1'<BEA-180046> <[/TDMRemoteTDomain/getTsession/MTS-Remote, create = false>
ExecuteThread: '1'<BEA-180046> <]/TDMRemoteTDomain/getTsession/20/null>
ExecuteThread: '1'<BEA-180046> </TDMRemoteTDomain/getTsession/100/null>
ExecuteThread: '1'<BEA-180046> <]/TDMImport/getStatus/30/AVAILABLE>
ExecuteThread: '1'<BEA-180046> <]/WTCService/getImport/40/(0)>
ExecuteThread: '1'<BEA-180046> <[/TDMRemoteTDomain/getTsession/MTS-Remote, create = true>
ExecuteThread: '1'<BEA-180046> <[/WLSInvoke/weblogic.wtc.gwt.TDMLocalTDomain@264a55ca/weblogic.wtc.gwt.TDMRemoteTDomain@acb54dc7>
ExecuteThread: '1'<BEA-180046> <]/WLSInvoke/10>
ExecuteThread: '1'<BEA-180046> <[/dsession(1)/set_compression_threshold/2147483647>
ExecuteThread: '1'<BEA-180046> <]/dsession(1)/set_compression_threshold/20/>
ExecuteThread: '1'<BEA-180046> <[/dsession(1)/set_sess_sec/NONE>
ExecuteThread: '1'<BEA-180046> <]/dsession(1)/set_sess_sec/30/>
ExecuteThread: '1'<BEA-180046> <[/dsession(1)/setDesiredName/WTC_OBF>
ExecuteThread: '1'<BEA-180046> <]/dsession(1)/setDesiredName/10/>
ExecuteThread: '1'<BEA-180046> <[/dsession(1)/set_dom_target_name/OBF_WTC>
ExecuteThread: '1'<BEA-180046> <]/dsession(1)/set_dom_target_name/10/>
ExecuteThread: '1'<BEA-180046> <[/dsession(1)/set_local_domain_name/MTS-Local>
ExecuteThread: '1'<BEA-180046> <]/dsession(1)/set_local_domain_name/10>
ExecuteThread: '1'<BEA-180046> <[/dsession(1)/setRemoteDomainId/OBF_WTC>
ExecuteThread: '1'<BEA-180046> <]/dsession(1)/setRemoteDomainId/10>
ExecuteThread: '1'<BEA-180046> <[/TDMRemoteTDomain/getKeepAlive>
ExecuteThread: '1'<BEA-180046> <]/TDMRemoteTDomain/getKeepAlive/10>
ExecuteThread: '1'<BEA-180046> <[/dsession(1)/setKeepAlive/0>
ExecuteThread: '1'<BEA-180046> <]/dsession(1)/setKeepAlive/10/>
ExecuteThread: '1'<BEA-180046> <[/TDMRemoteTDomain/getKeepAliveWait>
ExecuteThread: '1'<BEA-180046> <]/TDMRemoteTDomain/getKeepAliveWait/10>
ExecuteThread: '1'<BEA-180046> <[/dsession(1)/setKeepAliveWait/0>
ExecuteThread: '1'<BEA-180046> <]/dsession(1)/setKeepAliveWait/10/>
ExecuteThread: '1'<BEA-180046> <[/dsession/setAppKey/TpUsrFile>
ExecuteThread: '1'<BEA-180046> <]/dsession/setAppKey/10/>
ExecuteThread: '1'<BEA-180046> <[/dsession/setAllowAnonymous/false>
ExecuteThread: '1'<BEA-180046> <]/dsession/setAllowAnonymous/10/>
ExecuteThread: '1'<BEA-180046> <[/dsession/setDfltAppKey/-1>
ExecuteThread: '1'<BEA-180046> <]/dsession/setDfltAppKey/10/>
ExecuteThread: '1'<BEA-180046> <[/dsession(1)/setEncryptionFlags/39>
ExecuteThread: '1'<BEA-180046> <]/dsession(1)/setEncryptionFlags/10>
ExecuteThread: '1'<BEA-180046> <[/dsession(1)/tpinit/weblogic.wtc.jatmi.TPINIT@355e82>
ExecuteThread: '1'<BEA-180046> <[/dsession(1)/do_connect/WTC_OBF>
ExecuteThread: '1'<BEA-180046> <[/dsession(1)/alloc_TDOM/14/null>
ExecuteThread: '1'<BEA-180046> <]/dsession(1)/alloc_TDOM/10/TDOM:GWNW_XATMI_PRE_NW_ACALL1:1:-1:0:0:0:0:0:0:0:50:null>
ExecuteThread: '1'<BEA-180046> <[/write_dom_65_tfmh/WTC_OBF/10/134217727>
ExecuteThread: '1'<BEA-180046> </write_dom_65_tfmh/header calculated_size=524>
ExecuteThread: '1'<BEA-180046> </write_dom_65_tfmh/opcode calculated_size=540>
ExecuteThread: '1'<BEA-180046> </write_dom_65_tfmh/total calculated_size=540>
ExecuteThread: '1'<BEA-180046> <[/TpeOut/writeTuxedoMessage/>
ExecuteThread: '1'<BEA-180046> </TpeOut/writeTuxedoMessage/myNeedToWrite=32/myMark=32/myProtocol=10/parsedMetahdr=false>
ExecuteThread: '1'<BEA-180046> <]/TpeOut/writeTuxedoMessage/70/>
ExecuteThread: '1'<BEA-180046> </tfmh/write_dom_65_tfmh/TdomTcb=TDOM:GWNW_XATMI_PRE_NW_ACALL1:1:-1:0:0:0:0:0:0:0:50:null>
ExecuteThread: '1'<BEA-180046> <[/TpeOut/writeTuxedoMessage/>
ExecuteThread: '1'<BEA-180046> </TpeOut/writeTuxedoMessage/myNeedToWrite=540/myMark=540/myProtocol=10/parsedMetahdr=true>
ExecuteThread: '1'<BEA-180046> <*]/TpeOut/writeTuxedoMessage/40/>
ExecuteThread: '1'<BEA-180046> <]/write_dom_65_tfmh/110/0/>
ExecuteThread: '1'<BEA-180046> <[/read_dom_65_tfmh/10>
ExecuteThread: '1'<BEA-180046> <[/TpeIn/readTuxedoMessage/true>
ExecuteThread: '1'<BEA-180046> </TpeIn/readTuxedoMessage/myNeedToRead=32/myOffset=0/myMark=0/myProtocol=10/parsedMetahdr=false>
ExecuteThread: '1'<BEA-180046> </TpeIn/readTuxedoMessage/toRead=32>
ExecuteThread: '1'<BEA-180046> </TpeIn/readTuxedoMessage/myNeedToRead=0/myOffset=32/myMark=0>
ExecuteThread: '1'<BEA-180046> </TpeIn/readTuxedoMessage/size=544>
ExecuteThread: '1'<BEA-180046> <[/TpeIn/readTuxedoMessage/false>
ExecuteThread: '1'<BEA-180046> </TpeIn/readTuxedoMessage/myNeedToRead=512/myOffset=32/myMark=0/myProtocol=10/parsedMetahdr=true>
ExecuteThread: '1'<BEA-180046> </TpeIn/readTuxedoMessage/toRead=512>
ExecuteThread: '1'<BEA-180046> </TpeIn/readTuxedoMessage/myNeedToRead=0/myOffset=544/myMark=0>
ExecuteThread: '1'<BEA-180046> <]/TpeIn/readTuxedoMessage/120/true>
ExecuteThread: '1'<BEA-180046> <]/TpeIn/readTuxedoMessage/150/true>
ExecuteThread: '1'<BEA-180046> </tfmh/read_dom_65_tfmh/opcode=GWNW_XATMI_PRE_NW_ACALL1_RPLY>
ExecuteThread: '1'<BEA-180046> <[/TpeIn/available/>
ExecuteThread: '1'<BEA-180046> <]/TpeIn/available/20/512>
ExecuteThread: '1'<BEA-180046> </read_dom_65_tfmh/bufsize=544 available=512>
ExecuteThread: '1'<BEA-180046> <[/TdomTcb/set_security_type 0>
ExecuteThread: '1'<BEA-180046> <]/TdomTcb/set_security_type>
ExecuteThread: '1'<BEA-180046> <[/TdomTcb/set_tm_release 64>
ExecuteThread: '1'<BEA-180046> <]/TdomTcb/set_tm_release>
ExecuteThread: '1'<BEA-180046> <[/TdomTcb/set_dom_protocol 13>
ExecuteThread: '1'<BEA-180046> <]/TdomTcb/set_dom_protocol>
ExecuteThread: '1'<BEA-180046> <]/read_dom_65_tfmh/70/0/0>
ExecuteThread: '1'<BEA-180046> <Remote gateway support features = 0>
ExecuteThread: '1'<BEA-180046> < /dsession(1)/do_connect/dom_protocol 13>
ExecuteThread: '1'<BEA-180046> </dsession(1)/do_connect/no LLE protocol>
ExecuteThread: '1'<BEA-180046> <[/dsession(1)/setUpTuxedoAAA/>
ExecuteThread: '1'<BEA-180046> <]/dsession/setUpTuxedoAAA/10/return 0>
ExecuteThread: '1'<BEA-180046> <[/dsession(1)/dmqDecision/>
ExecuteThread: '1'<BEA-180046> <]/dsession(1)/dmqDecision/10>
xecuteThread: '1' BEA-180087> <Established a connection to a remote domain OBF_WTC.>
ExecuteThread: '1'<BEA-180046> <]/dsession(1)/do_connect/170/>
ExecuteThread: '1'<BEA-180046> <]/dsession(1)/tpinit/30/>
ExecuteThread: '1'<BEA-180046> <]/TDMRemoteTDomain/getTsession/90/weblogic.wtc.gwt.gwdsession@1>
ExecuteThread: '1'<BEA-180046> </TDMRemoteTDomain/getTsession/100/weblogic.wtc.gwt.gwdsession@1>
ExecuteThread: '1'<BEA-180046> <]/WTCRouteManager/selectTargetRotes/30/weblogic.wtc.gwt.gwdsession@1>
ExecuteThread: '1'<BEA-180046> <]/TuxedoConnection/getProviderRoute/20>
ExecuteThread: '1'<BEA-180046> <[/dsession(1)/tpcall/GSM_GetAcct/weblogic.wtc.jatmi.TypedFML32@247c48/32/null>
ExecuteThread: '1'<BEA-180046> <[/dsession(1)/tpacall/GSM_GetAcct/weblogic.wtc.jatmi.TypedFML32@247c48/32/null/0>
ExecuteThread: '1'<BEA-180046> <[/dsession(1)/_tpacall_internal/GSM_GetAcct/weblogic.wtc.jatmi.tfmh@5b63c2/32/null/0>
ExecuteThread: '1'<BEA-180046> <myAppKey = null>
ExecuteThread: '1'<BEA-180046> <[/dsession(1)/alloc_TDOM/1/GSM_GetAcct>
ExecuteThread: '1'<BEA-180046> <]/dsession(1)/alloc_TDOM/10/TDOM:GWNW_XATMI_CALL:2:-1:0:0:32:0:0:0:0:50:GSM_GetAcct>
ExecuteThread: '1'<BEA-180046> <[/rdsession(1)/add_rplyObj/SessionAcallDescriptor:2:false/weblogic.wtc.jatmi.TuxRply@f29035/-1>
ExecuteThread: '1'<BEA-180046> <]/rdsession(1)/add_rplyObj/40/>
ExecuteThread: '1'<BEA-180046> <[/write_dom_65_tfmh/WTC_OBF/13/2147483647>
ExecuteThread: '1'<BEA-180046> </write_dom_65_tfmh/header calculated_size=76>
ExecuteThread: '1'<BEA-180046> </write_dom_65_tfmh/opcode calculated_size=96>
ExecuteThread: '1'<BEA-180046> <[/FML32/_tmpresend/java.io.DataOutputStream@d9af8d>
ExecuteThread: '1'<BEA-180046> <numPointerFields=0 numView32Fields=0 numFml32Fields=0>
ExecuteThread: '1'<BEA-180046> <]/TypedFML32/_tmpresend/60/>
ExecuteThread: '1'<BEA-180046> <Outbound UDATA: buffer type(FML32, null)>
ExecuteThread: '1'<BEA-180072> <+++++ 65 User Data(184) +++++>
ExecuteThread: '1'<BEA-180113> <FF FF D8 F0 00 00 00 B8 7F FF FF FF 00 00 00 08 00 00 00 00 .......?............>
ExecuteThread: '1'<BEA-180113> <00 00 00 10 00 10 DF 9D 00 00 00 01 02 10 DF 93 00 00 00 01 .......?.......?....>
ExecuteThread: '1'<BEA-180113> <0A 10 DF 2F 00 00 00 13 00 00 00 0B 46 4F 58 5F 53 59 53 54 ............FOX.SYST>
ExecuteThread: '1'<BEA-180113> <45 4D 00 00 0A 10 DF 39 00 00 00 1A 00 00 00 12 38 39 63 61 EM.....9........89ca>
ExecuteThread: '1'<BEA-180113> <2D 61 31 34 66 65 65 31 32 34 34 36 65 00 00 00 0A 10 DF 43 .a14fee12446e......C>
ExecuteThread: '1'<BEA-180113> <00 00 00 13 00 00 00 0B 46 4F 58 5F 53 59 53 54 45 4D 00 00 ........FOX.SYSTEM..>
ExecuteThread: '1'<BEA-180113> <0A 10 DF 4D 00 00 00 14 00 00 00 0C 47 53 4D 5F 47 65 74 41 ...M........GSM.GetA>
ExecuteThread: '1'<BEA-180113> <63 63 74 00 0A 10 DF F7 00 00 00 0C 00 00 00 04 46 4F 58 00 cct.............FOX.>
ExecuteThread: '1'<BEA-180113> <0A 11 3E 7B 00 00 00 11 00 00 00 09 32 32 32 32 32 32 32 32 ............22222222>
ExecuteThread: '1'<BEA-180113> <00 00 00 00 .... >
ExecuteThread: '1'<BEA-180073> <+++++ END +++++>
ExecuteThread: '1'<BEA-180046> </write_dom_65_tfmh/total calculated_size=280>
ExecuteThread: '1'<BEA-180046> <[/TpeOut/writeTuxedoMessage/>
ExecuteThread: '1'<BEA-180046> </TpeOut/writeTuxedoMessage/myNeedToWrite=32/myMark=32/myProtocol=13/parsedMetahdr=false>
ExecuteThread: '1'<BEA-180046> <]/TpeOut/writeTuxedoMessage/70/>
ExecuteThread: '1'<BEA-180046> <[/TpeOut/write(b)/>
ExecuteThread: '1'<BEA-180046> <]/TpeOut/write/10/>
ExecuteThread: '1'<BEA-180046> <[/TpeOut/write(b)/>
ExecuteThread: '1'<BEA-180046> <]/TpeOut/write/10/>
ExecuteThread: '1'<BEA-180046> </tfmh/write_dom_65_tfmh/TdomTcb=TDOM:GWNW_XATMI_CALL:2:-1:0:0:32:0:0:0:0:50:GSM_GetAcct>
ExecuteThread: '1'<BEA-180046> <[/TpeOut/write(b)/>
ExecuteThread: '1'<BEA-180046> <]/TpeOut/write/10/>
ExecuteThread: '1'<BEA-180046> <[/TpeOut/write(b)/>
ExecuteThread: '1'<BEA-180046> <[/TpeOut/writeTuxedoMessage/>
ExecuteThread: '1'<BEA-180046> </TpeOut/writeTuxedoMessage/myNeedToWrite=280/myMark=280/myProtocol=13/parsedMetahdr=true>
ExecuteThread: '1'<BEA-180046> <*]/TpeOut/writeTuxedoMessage/40/>
ExecuteThread: '1'<BEA-180046> <]/TpeOut/write/30/>
ExecuteThread: '1'<BEA-180046> <]/write_dom_65_tfmh/110/0/>
ExecuteThread: '1'<BEA-180046> <]/dsession(1)/_tpacall_internal/40/SessionAcallDescriptor:2:false>
ExecuteThread: '1'<BEA-180046> <]/dsession(1)/tpacall/100/SessionAcallDescriptor:2:false>
ExecuteThread: '1'<BEA-180046> <[/dsession(1)/tpgetrply/SessionAcallDescriptor:2:false/32>
ExecuteThread: '1'<BEA-180046> <[/dsession(1)/_tpgetrply_internal/SessionAcallDescriptor:2:false/32>
ExecuteThread: '1'<BEA-180046> <[/TuxRply/get_specific_reply/SessionAcallDescriptor:2:false/weblogic.wtc.gwt.gwdsession@1/true>
ExecuteThread: '1'<BEA-180046> <TuxRply/get_specific_reply: Thr Thread[[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads] waiting for message oid SessionAcallDescriptor:2:false/weblogic.wtc.gwt.gwdsession@1 on lockReq = weblogic.wtc.jatmi.TuxRply$LockReq@948b59>
ExecuteThread: '4' <BEA-180046> <[/TuxedoMuxableSocket/dispatch/>
ExecuteThread: '4' <BEA-180046> </TuxedoMuxableSocket/dispatch/myOffset=444/myDecryptOffset=0/myProtocol=13>
ExecuteThread: '4' <BEA-180046> </TuxedoMuxableSocket/dispatch/size=444>
ExecuteThread: '4' <BEA-180046> <[/rdsession(1)/allocTfmh/>
ExecuteThread: '4' <BEA-180046> </rdsession(1)/allocTfmh/null>
ExecuteThread: '4' <BEA-180046> <]/rdsession(1)/allocTfmh/weblogic.wtc.jatmi.tfmh@489f21>
ExecuteThread: '4' <BEA-180046> <[/read_dom_65_tfmh/13>
ExecuteThread: '4' <BEA-180046> </tfmh/read_dom_65_tfmh/opcode=GWNW_XATMI_REPLY>
ExecuteThread: '4' <BEA-180046> </read_dom_65_tfmh/bufsize=444 available=968>
ExecuteThread: '4' <BEA-180046> </read_dom_65_tfmh/prior compos bufsize=364 available=920>
ExecuteThread: '4' <BEA-180046> </read_dom_65_tfmh/post compos bufsize=364 available=920>
ExecuteThread: '4' <BEA-180046> <Inbound 65 UDATA: buffer type(FML32, null)>
ExecuteThread: '4' <BEA-180072> <+++++ User Data(364) +++++>
ExecuteThread: '4' <BEA-180113> <FF FF D8 F0 00 00 01 2C 00 00 10 00 00 00 00 10 00 00 00 00 ....................>
ExecuteThread: '4' <BEA-180113> <00 00 00 10 0A 10 DF 2F 00 00 00 13 00 00 00 0B 46 4F 58 5F ................FOX.>
ExecuteThread: '4' <BEA-180113> <53 59 53 54 45 4D 00 00 0A 10 DF 39 00 00 00 0E 00 00 00 06 SYSTEM.....9........>
ExecuteThread: '4' <BEA-180113> <44 75 6D 6D 79 00 00 00 0A 10 DF 43 00 00 00 0C 00 00 00 04 Dummy......C........>
ExecuteThread: '4' <BEA-180113> <46 4F 58 00 0A 10 DF 4D 00 00 00 14 00 00 00 0C 47 53 4D 5F FOX....M........GSM.>
ExecuteThread: '4' <BEA-180113> <47 65 74 41 63 63 74 00 0A 10 DF F7 00 00 00 0D 00 00 00 05 GetAcct.............>
ExecuteThread: '4' <BEA-180113> <53 74 75 62 00 00 00 00 0A 11 3E 77 00 00 00 10 00 00 00 08 Stub.......w........>
ExecuteThread: '4' <BEA-180113> <31 32 33 34 2E 35 36 00 0A 11 3E 8A 00 00 00 0F 00 00 00 07 1234.56....?........>
ExecuteThread: '4' <BEA-180113> <33 34 35 2E 36 37 00 00 0A 11 3E 8B 00 00 00 0F 00 00 00 07 345.67.....?........>
ExecuteThread: '4' <BEA-180113> <34 35 36 2E 37 38 00 00 0A 11 3E 8C 00 00 00 0F 00 00 00 07 456.78.....?........>
ExecuteThread: '4' <BEA-180113> <35 36 37 2E 38 39 00 00 0A 11 3E 8D 00 00 00 0F 00 00 00 07 567.89.....?........>
ExecuteThread: '4' <BEA-180113> <32 33 34 2E 35 36 00 00 0A 11 3E 9B 00 00 00 0F 00 00 00 07 234.56.....?........>
ExecuteThread: '4' <BEA-180113> <53 79 64 6E 65 79 00 00 0A 11 3E 9D 00 00 00 16 00 00 00 0E Sydney.....?........>
ExecuteThread: '4' <BEA-180113> <4D 69 6C 6C 65 72 20 53 74 72 65 65 74 00 00 00 0A 11 3E 9E Miller.Street......?>
ExecuteThread: '4' <BEA-180113> <00 00 00 15 00 00 00 0D 4E 6F 72 74 68 20 53 79 64 6E 65 79 ........North.Sydney>
ExecuteThread: '4' <BEA-180113> <00 00 00 00 0A 11 3E 9F 00 00 00 0C 00 00 00 04 4E 53 57 00 .......?........NSW.>
ExecuteThread: '4' <BEA-180113> <0A 11 3E A1 00 00 00 0D 00 00 00 05 32 30 36 30 00 00 00 00 ...?........2060....>
ExecuteThread: '4' <BEA-180113> <0A 11 3E A8 00 00 00 13 00 00 00 0B 4A 6F 68 6E 20 44 75 6D ...?........John.Dum>
ExecuteThread: '4' <BEA-180113> <6D 79 00 00 my.. >
ExecuteThread: '4' <BEA-180073> <+++++ END +++++>
ExecuteThread: '4' <BEA-180046> <[/TypedFML32/_tmpostrecv/364>
ExecuteThread: '4' <BEA-180046> <]/TypedFML32/_tmpostrecv/100/>
ExecuteThread: '4' <BEA-180046> <]/read_dom_65_tfmh/150/0>
ExecuteThread: '4' <BEA-180046> <[/rdsession(1)/dispatch/>
ExecuteThread: '4' <BEA-180046> </rdsession(1)/dispatch/TdomTcb=TDOM:GWNW_XATMI_REPLY:2:-1:0:32:32:0:0:0:0:50:null>
ExecuteThread: '4' <BEA-180046> </rdsession/dispatch/25/reqId = 2>
ExecuteThread: '4' <BEA-180046> <[/rdsession(1)/addlist/weblogic.wtc.jatmi.tfmh@489f21/2>
ExecuteThread: '4' <BEA-180046> </rdsession(1)/addlist/SessionAcallDescriptor:2:false>
ExecuteThread: '4' <BEA-180046> <[/TuxRply/add_reply/weblogic.wtc.gwt.gwdsession@1/SessionAcallDescriptor:2:false>
ExecuteThread: '4' <BEA-180046> <TuxRply/add_reply: found eligible waiter= weblogic.wtc.jatmi.TuxRply$LockReq@948b59 for oid SessionAcallDescriptor:2:false/weblogic.wtc.gwt.gwdsession@1>
ExecuteThread: '4' <BEA-180046> <]/rdsession(1)/addlist/10/>
ExecuteThread: '1'<BEA-180046> <TuxRply/get_specific_reply: Thr Thread[[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads] got message oid SessionAcallDescriptor:2:false/weblogic.wtc.gwt.gwdsession@1 on lockReq = weblogic.wtc.jatmi.TuxRply$LockReq@948b59>
ExecuteThread: '4' <BEA-180046> <]/rdsession(1)/dispatch/60/>
ExecuteThread: '1'<BEA-180046> <]/TuxRply/get_specific_reply/40/weblogic.wtc.jatmi.tfmh@489f21>
ExecuteThread: '4' <BEA-180046> <]/TuxedoMuxableSocket/dispatch/30/>
ExecuteThread: '1'<BEA-180046> <]/dsession(1)/_tpgetrply_internal/20/weblogic.wtc.jatmi.tfmh@489f21>
ExecuteThread: '1'<BEA-180046> <*]/dsession(1)/tpgetrply/85/opcode=2/diagnostic=0>
ExecuteThread: '1'<BEA-180046> <[/rdsession(1)/restoreTfmhToCache/>
ExecuteThread: '1'<BEA-180046> </rdsession(1)/addedtocache=weblogic.wtc.jatmi.tfmh@489f21>
ExecuteThread: '1'<BEA-180046> <]/rdsession(1)/restoreTfmhToCache/30/>
ExecuteThread: '1'<BEA-180046> <]/dsession(1)/tpgetrply/100/weblogic.wtc.jatmi.TypedFML32@9d078d:0:SessionAcallDescriptor:2:false>
ExecuteThread: '1'<BEA-180046> <]/dsession(1)/tpcall/20/weblogic.wtc.jatmi.TypedFML32@9d078d:0:SessionAcallDescriptor:2:false>
ExecuteThread: '1'<BEA-180046> <]/TuxedoConnection/tpcall/40/weblogic.wtc.jatmi.TypedFML32@9d078d:0:SessionAcallDescriptor:2:false>
ExecuteThread: '1'<BEA-180046> <[/TuxedoConnection/tpterm/>
ExecuteThread: '1'<BEA-180046> <]/TuxedoConnection/tpterm/10>
and the unsuccessful call:
ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1250643290962> <BEA-180046> <[/TuxedoConnection/TuxedoConnection/>
ExecuteThread: '0' <BEA-180046> <no transaction>
ExecuteThread: '0' <BEA-180046> <]/TuxedoConnection/TuxedoConnection/30>
ExecuteThread: '0' <BEA-180046> <[/TuxedoConnection/tpcall/GSM_GetAcct/32>
ExecuteThread: '0' <BEA-180046> <[/TuxedoConnection/getProviderRoute/GSM_GetAcct>
ExecuteThread: '0' <BEA-180046> <[/WTCRouteManager/selectTargetRotes/GSM_GetAcct>
ExecuteThread: '0' <BEA-180046> <[/WTCService/getImport/(svc = GSM_GetAcct, xid = null)>
ExecuteThread: '0' <BEA-180046> <[/TDMImport/getStatus/>
ExecuteThread: '0' <BEA-180046> <[/TDMRemoteTDomain/getTsession/MTS-Remote, create = false>
ExecuteThread: '0' <BEA-180046> <[/dsession(1)/getIsTerminated/ldom=WTC_OBF rdom=OBF_WTC>
ExecuteThread: '0' <BEA-180046> <]/dsession(1)/getIsTerminated/false>
ExecuteThread: '0' <BEA-180046> <]/TDMRemoteTDomain/getTsession/10/weblogic.wtc.gwt.gwdsession@1>
ExecuteThread: '0' <BEA-180046> </TDMRemoteTDomain/getTsession/100/weblogic.wtc.gwt.gwdsession@1>
ExecuteThread: '0' <BEA-180046> <]/TDMImport/getStatus/30/AVAILABLE>
ExecuteThread: '0' <BEA-180046> <]/WTCService/getImport/40/(0)>
ExecuteThread: '0' <BEA-180046> <[/TDMRemoteTDomain/getTsession/MTS-Remote, create = true>
ExecuteThread: '0' <BEA-180046> <[/dsession(1)/getIsTerminated/ldom=WTC_OBF rdom=OBF_WTC>
ExecuteThread: '0' <BEA-180046> <]/dsession(1)/getIsTerminated/false>
ExecuteThread: '0' <BEA-180046> <]/TDMRemoteTDomain/getTsession/10/weblogic.wtc.gwt.gwdsession@1>
ExecuteThread: '0' <BEA-180046> </TDMRemoteTDomain/getTsession/100/weblogic.wtc.gwt.gwdsession@1>
ExecuteThread: '0' <BEA-180046> <]/WTCRouteManager/selectTargetRotes/30/weblogic.wtc.gwt.gwdsession@1>
ExecuteThread: '0' <BEA-180046> <]/TuxedoConnection/getProviderRoute/20>
ExecuteThread: '0' <BEA-180046> <[/dsession(1)/tpcall/GSM_GetAcct/weblogic.wtc.jatmi.TypedFML32@73a146/32/null>
ExecuteThread: '0' <BEA-180046> <[/dsession(1)/tpacall/GSM_GetAcct/weblogic.wtc.jatmi.TypedFML32@73a146/32/null/0>
ExecuteThread: '0' <BEA-180046> <[/dsession(1)/_tpacall_internal/GSM_GetAcct/weblogic.wtc.jatmi.tfmh@610734/32/null/0>
ExecuteThread: '0' <BEA-180046> <myAppKey = null>
ExecuteThread: '0' <BEA-180046> <[/dsession(1)/alloc_TDOM/1/GSM_GetAcct>
ExecuteThread: '0' <BEA-180046> <]/dsession(1)/alloc_TDOM/10/TDOM:GWNW_XATMI_CALL:3:-1:0:0:32:0:0:0:0:50:GSM_GetAcct>
ExecuteThread: '0' <BEA-180046> <[/rdsession(1)/add_rplyObj/SessionAcallDescriptor:3:false/weblogic.wtc.jatmi.TuxRply@f29035/-1>
ExecuteThread: '0' <BEA-180046> <]/rdsession(1)/add_rplyObj/40/>
ExecuteThread: '0' <BEA-180046> <[/write_dom_65_tfmh/WTC_OBF/13/2147483647>
ExecuteThread: '0' <BEA-180046> </write_dom_65_tfmh/header calculated_size=76>
ExecuteThread: '0' <BEA-180046> </write_dom_65_tfmh/opcode calculated_size=96>
ExecuteThread: '0' <BEA-180046> <[/FML32/_tmpresend/java.io.DataOutputStream@200fa2>
ExecuteThread: '0' <BEA-180046> <numPointerFields=0 numView32Fields=0 numFml32Fields=0>
ExecuteThread: '0' <BEA-180046> <]/TypedFML32/_tmpresend/60/>
ExecuteThread: '0' <BEA-180046> <Outbound UDATA: buffer type(FML32, null)>
ExecuteThread: '0' <BEA-180072> <+++++ 65 User Data(184) +++++>
ExecuteThread: '0' <BEA-180113> <FF FF D8 F0 00 00 00 B8 7F FF FF FF 00 00 00 08 00 00 00 00 .......?............>
ExecuteThread: '0' <BEA-180113> <00 00 00 10 00 10 DF 9D 00 00 00 01 02 10 DF 93 00 00 00 01 .......?.......?....>
ExecuteThread: '0' <BEA-180113> <0A 10 DF 2F 00 00 00 13 00 00 00 0B 46 4F 58 5F 53 59 53 54 ............FOX.SYST>
ExecuteThread: '0' <BEA-180113> <45 4D 00 00 0A 10 DF 39 00 00 00 1A 00 00 00 12 38 66 33 64 EM.....9........8f3d>
ExecuteThread: '0' <BEA-180113> <2D 39 34 63 39 34 61 30 30 61 35 62 66 00 00 00 0A 10 DF 43 .94c94a00a5bf......C>
ExecuteThread: '0' <BEA-180113> <00 00 00 13 00 00 00 0B 46 4F 58 5F 53 59 53 54 45 4D 00 00 ........FOX.SYSTEM..>
ExecuteThread: '0' <BEA-180113> <0A 10 DF 4D 00 00 00 14 00 00 00 0C 47 53 4D 5F 47 65 74 41 ...M........GSM.GetA>
ExecuteThread: '0' <BEA-180113> <63 63 74 00 0A 10 DF F7 00 00 00 0C 00 00 00 04 46 4F 58 00 cct.............FOX.>
ExecuteThread: '0' <BEA-180113> <0A 11 3E 7B 00 00 00 11 00 00 00 09 32 32 32 32 32 32 32 32 ............22222222>
ExecuteThread: '0' <BEA-180113> <00 00 00 00 .... >
ExecuteThread: '0' <BEA-180073> <+++++ END +++++>
ExecuteThread: '0' <BEA-180046> </write_dom_65_tfmh/total calculated_size=280>
ExecuteThread: '0' <BEA-180046> <[/TpeOut/writeTuxedoMessage/>
ExecuteThread: '0' <BEA-180046> </TpeOut/writeTuxedoMessage/myNeedToWrite=32/myMark=32/myProtocol=13/parsedMetahdr=false>
ExecuteThread: '0' <BEA-180046> <]/TpeOut/writeTuxedoMessage/70/>
ExecuteThread: '0' <BEA-180046> <[/TpeOut/write(b)/>
ExecuteThread: '0' <BEA-180046> <]/TpeOut/write/10/>
ExecuteThread: '0' <BEA-180046> <[/TpeOut/write(b)/>
ExecuteThread: '0' <BEA-180046> <]/TpeOut/write/10/>
ExecuteThread: '0' <BEA-180046> </tfmh/write_dom_65_tfmh/TdomTcb=TDOM:GWNW_XATMI_CALL:3:-1:0:0:32:0:0:0:0:50:GSM_GetAcct>
ExecuteThread: '0' <BEA-180046> <[/TpeOut/write(b)/>
ExecuteThread: '0' <BEA-180046> <]/TpeOut/write/10/>
ExecuteThread: '0' <BEA-180046> <[/TpeOut/write(b)/>
ExecuteThread: '0' <BEA-180046> <[/TpeOut/writeTuxedoMessage/>
ExecuteThread: '0' <BEA-180046> </TpeOut/writeTuxedoMessage/myNeedToWrite=280/myMark=280/myProtocol=13/parsedMetahdr=true>
ExecuteThread: '0' <BEA-180046> <*]/TpeOut/writeTuxedoMessage/40/>
ExecuteThread: '0' <BEA-180046> <]/TpeOut/write/30/>
ExecuteThread: '0' <BEA-180046> <]/write_dom_65_tfmh/110/0/>
ExecuteThread: '0' <BEA-180046> <]/dsession(1)/_tpacall_internal/40/SessionAcallDescriptor:3:false>
ExecuteThread: '0' <BEA-180046> <]/dsession(1)/tpacall/100/SessionAcallDescriptor:3:false>
ExecuteThread: '0' <BEA-180046> <[/dsession(1)/tpgetrply/SessionAcallDescriptor:3:false/32>
ExecuteThread: '0' <BEA-180046> <[/dsession(1)/_tpgetrply_internal/SessionAcallDescriptor:3:false/32>
ExecuteThread: '0' <BEA-180046> <[/TuxRply/get_specific_reply/SessionAcallDescriptor:3:false/weblogic.wtc.gwt.gwdsession@1/true>
ExecuteThread: '0' <BEA-180046> <TuxRply/get_specific_reply: Thr Thread[[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads] waiting for message oid SessionAcallDescriptor:3:false/weblogic.wtc.gwt.gwdsession@1 on lockReq = weblogic.wtc.jatmi.TuxRply$LockReq@e28ba0>
ExecuteThread: '4' <BEA-180046> <[/TuxedoMuxableSocket/dispatch/>
ExecuteThread: '4' <BEA-180046> </TuxedoMuxableSocket/dispatch/myOffset=444/myDecryptOffset=0/myProtocol=13>
ExecuteThread: '4' <BEA-180046> </TuxedoMuxableSocket/dispatch/size=444>
ExecuteThread: '4' <BEA-180046> <[/rdsession(1)/allocTfmh/>
ExecuteThread: '4' <BEA-180046> </rdsession(1)/allocTfmh/weblogic.wtc.jatmi.tfmh@489f21>
ExecuteThread: '4' <BEA-180046> <]/rdsession(1)/allocTfmh/weblogic.wtc.jatmi.tfmh@489f21>
ExecuteThread: '4' <BEA-180046> <[/read_dom_65_tfmh/13>
ExecuteThread: '4' <BEA-180046> <]/read_dom_65_tfmh/20/-1/-10000/1938831426>
ExecuteThread: '4' <BEA-180046> <[/TuxedoMuxableSocket/endOfStream/>
ExecuteThread: '4' <BEA-180046> <[/dsession(WTC_OBF, OBF_WTC)/setIsTerminated>
ExecuteThread: '4' <BEA-180046> <[/dsession(WTC_OBF, OBF_WTC)/termimateTDomainSession/false>
ExecuteThread: '4' <BEA-180046> <[/TDMRemoteTDomain/onTerm/1>
ExecuteThread: '4' <BEA-180046> <]/TDMRemoteTDomain/onTerm/20>
ExecuteThread: '4' <BEA-180046> <]/dsession/terminateTDomainSession(30)>
ExecuteThread: '4' <BEA-180046> <]/dsession/setIsTerminated(10)/done>
ExecuteThread: '4' <BEA-180046> <[/rdsession(1)/remove_rplyObj/SessionAcallDescriptor:3:false>
ExecuteThread: '4' <BEA-180046> <]/rdsession(1)/remove_rplyObj/20/true>
ExecuteThread: '4' <BEA-180046> <[/TuxRply/add_reply/weblogic.wtc.gwt.gwdsession@1/SessionAcallDescriptor:3:false>
ExecuteThread: '4' <BEA-180046> <TuxRply/add_reply: found eligible waiter= weblogic.wtc.jatmi.TuxRply$LockReq@e28ba0 for oid SessionAcallDescriptor:3:false/weblogic.wtc.gwt.gwdsession@1>
ExecuteThread: '4' <BEA-180046> </rdsession/connectionHasTerminated/10: TPESYSTEM sent>
ExecuteThread: '4' <BEA-180046> <]/TuxedoMuxableSocket/endOfStream/10>
ExecuteThread: '4' <BEA-180046> <[/dsession(WTC_OBF, OBF_WTC)/setIsTerminated>
ExecuteThread: '4' <BEA-180046> <]/dsession/setIsTerminated(10)/done>
ExecuteThread: '4' <BEA-180046> <]/TuxedoMuxableSocket/dispatch/90/failure=-1>
ExecuteThread: '0' <BEA-180046> <TuxRply/get_specific_reply: Thr Thread[[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads] got message oid SessionAcallDescriptor:3:false/weblogic.wtc.gwt.gwdsession@1 on lockReq = weblogic.wtc.jatmi.TuxRply$LockReq@e28ba0>
ExecuteThread: '0' <BEA-180046> <]/TuxRply/get_specific_reply/40/weblogic.wtc.jatmi.tfmh@aa352e>
ExecuteThread: '0' <BEA-180046> <]/dsession(1)/_tpgetrply_internal/20/weblogic.wtc.jatmi.tfmh@aa352e>
ExecuteThread: '0' <BEA-180046> <*]/dsession(1)/tpgetrply/85/opcode=3/diagnostic=12>
ExecuteThread: '0' <BEA-180046> <*]/dsession(1)/tpgetrply/95/>
ExecuteThread: '0' <BEA-180046> <*]/dsession(1)/tpcall/30/TPESYSTEM(12):0:0:TPED_MINVAL(0):QMNONE(0):0>
ExecuteThread: '0' <BEA-180046> <*]/TuxedoConnection/tpcall/30/TPESYSTEM(12):0:0:TPED_MINVAL(0):QMNONE(0):0>
ExecuteThread: '0' <BEA-180046> <[/TuxedoConnection/tpterm/>
ExecuteThread: '0' <BEA-180046> <]/TuxedoConnection/tpterm/10>Hi Todd,
Thanks for responding.
The Tuxedo developer here has provided me with the following information:
The Tuxedo version is 6.5 and the patch level as seen in the last line of $TUXDIR/udataobj/patchlev file is "389. CR093934 TUX 6.5 > HP-UX 11 64-bit /Domain is unable to connect to 32-bit domains"
The OS, Tuxedo is running on is: "HP-UX B.11.11 U 9000/800 485721183 unlimited-user license"
In the Tuxedo ULOG file, I can see that the MTS service has received the request from WTC and the response being logged as well, without any error. However immediately after the request is completed, error messages is logged. The extract of this message is shown below:
130843.focdevapph001!GWTDOMAIN.4780: LIBGWT_CAT:1130: INFO: Disconnected from domain (domainid=<WTC_OBF>)
130843.focdevapph001!GWTDOMAIN.4780: LIBGWT_CAT:1354: INFO: Retrying domain (domainid=<WTC_OBF>) every 60 seconds
130843.focdevapph001!GWTDOMAIN.4780: LIBGWT_CAT:2005: INFO: Receive connecting request from remote domain (domainid<WTC_OBF>)
130843.focdevapph001!GWTDOMAIN.4780: LIBGWT_CAT:1128: INFO: Connection accepted from domain (domainid=<WTC_OBF>)
Here is the WTC config fragment:
<wtc-server>
<name>MTS</name>
<target>AdminServer</target>
<wtc-local-tux-dom>
<name>MTS-Local</name>
<access-point>MTS-Local</access-point>
<access-point-id>WTC_OBF</access-point-id>
<security>NONE</security>
<connection-policy>ON_STARTUP</connection-policy>
<nw-addr>//localhost:7050</nw-addr>
<interoperate>Yes</interoperate>
</wtc-local-tux-dom>
<wtc-remote-tux-dom>
<name>MTS-Remote</name>
<access-point>MTS-Remote</access-point>
<access-point-id>OBF_WTC</access-point-id>
<connection-policy>ON_STARTUP</connection-policy>
<credential-policy>LOCAL</credential-policy>
<local-access-point>MTS-Local</local-access-point>
<retry-interval>10</retry-interval>
<max-retries>10</max-retries>
<nw-addr>//focdevapph001:25395</nw-addr>
<federation-url></federation-url>
<federation-name></federation-name>
</wtc-remote-tux-dom>
<wtc-import>
<name>WTCImportedService-0</name>
<resource-name>GSM_GetAcct</resource-name>
<local-access-point>MTS-Local</local-access-point>
<remote-access-point-list>MTS-Remote</remote-access-point-list>
<remote-name>GSM_GetAcct</remote-name>
</wtc-import>
<wtc-import>
<name>WTCImportedService-1</name>
<resource-name>GSM_GetBillPay</resource-name>
<local-access-point>MTS-Local</local-access-point>
<remote-access-point-list>MTS-Remote</remote-access-point-list>
<remote-name>GSM_GetBillPay</remote-name>
</wtc-import>
<wtc-import>
<name>WTCImportedService-2</name>
<resource-name>SvcGetBilling</resource-name>
<local-access-point>MTS-Local</local-access-point>
<remote-access-point-list>MTS-Remote</remote-access-point-list>
<remote-name>SvcGetBilling</remote-name>
</wtc-import>
</wtc-server>
Finally, some tcpdump data:
Successful call:
11:41:44.715758 IP wsp165668wss.optus.com.au.51916 > focdevapph001.optus.com.au.25395: S 521001588:521001588(0) win 65535 <mss 1460,nop,wscale 3,nop,nop,timestamp 858559006 0,sackOK,eol>
0x0000: 4500 0040 7a3d 4000 4006 e571 0a10 2945 E..@z=@[email protected]..)E
0x0010: a12b 0689 cacc 6333 1f0d da74 0000 0000 .+....c3...t....
0x0020: b002 ffff 6f29 0000 0204 05b4 0103 0303 ....o)..........
0x0030: 0101 080a 332c 921e 0000 0000 0402 0000 ....3,..........
11:41:44.716690 IP focdevapph001.optus.com.au.25395 > wsp165668wss.optus.com.au.51916: S 1330679351:1330679351(0) ack 521001589 win 32768 <mss 1460,nop,nop,sackOK,wscale 0,nop,nop,nop,timestamp 42832250 858559006>
0x0000: 4500 0040 5e44 4000 3e06 036b a12b 0689 E..@^D@.>..k.+..
0x0010: 0a10 2945 6333 cacc 4f50 8e37 1f0d da75 ..)Ec3..OP.7...u
0x0020: b012 8000 7d89 0000 0204 05b4 0101 0402 ....}...........
0x0030: 0303 0001 0101 080a 028d 917a 332c 921e ...........z3,..
11:41:44.716786 IP wsp165668wss.optus.com.au.51916 > focdevapph001.optus.com.au.25395: . ack 1 win 65535 <nop,nop,timestamp 858559006 42832250>
0x0000: 4500 0034 1575 4000 4006 4a46 0a10 2945 E..4.u@[email protected]..)E
0x0010: a12b 0689 cacc 6333 1f0d da75 4f50 8e38 .+....c3...uOP.8
0x0020: 8010 ffff 3d56 0000 0101 080a 332c 921e ....=V......3,..
0x0030: 028d 917a ...z
11:41:44.718457 IP wsp165668wss.optus.com.au.51916 > focdevapph001.optus.com.au.25395: P 1:541(540) ack 1 win 65535 <nop,nop,timestamp 858559006 42832250>
0x0000: 4500 0250 7254 4000 4006 eb4a 0a10 2945 E..PrT@[email protected]..)E
0x0010: a12b 0689 cacc 6333 1f0d da75 4f50 8e38 .+....c3...uOP.8
0x0020: 8018 ffff 8a75 0000 0101 080a 332c 921e .....u......3,..
0x0030: 028d 917a 7390 3842 0000 000e 0000 0001 ...zs.8B........
0x0040: ffff ffff 0000 0000 0000 0000 0000 0001 ................
0x0050: 0000 021c 0000 0057 0000 0054 0000 0043 .......W...T...C
0x0060: 0000 005f 0000 004f 0000 0042 0000 0046 ..._...O...B...F
0x0070: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0080: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0090: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x00a0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x00b0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x00c0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x00d0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x00e0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x00f0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0100: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0110: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0120: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0130: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0140: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0150: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0160: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0170: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0180: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0190: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x01a0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x01b0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x01c0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x01d0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x01e0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x01f0: 0000 ..
11:41:44.719850 IP focdevapph001.optus.com.au.25395 > wsp165668wss.optus.com.au.51916: P 1:545(544) ack 541 win 32768 <nop,nop,timestamp 42832251 858559006>
0x0000: 4500 0254 5e45 4000 3e06 0156 a12b 0689 E..T^E@.>..V.+..
0x0010: 0a10 2945 6333 cacc 4f50 8e38 1f0d dc91 ..)Ec3..OP.8....
0x0020: 8018 8000 087b 0000 0101 080a 028d 917b .....{.........{
0x0030: 332c 921e 7390 3842 0000 000f 0000 0001 3,..s.8B........
0x0040: ffff ffff 0000 0000 0000 0020 0000 0001 ................
0x0050: 0000 0220 0000 004f 0000 0042 0000 0046 .......O...B...F
0x0060: 0000 005f 0000 0057 0000 0054 0000 0043 ..._...W...T...C
0x0070: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0080: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0090: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x00a0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x00b0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x00c0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x00d0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x00e0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x00f0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0100: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0110: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0120: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0130: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0140: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0150: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0160: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0170: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0180: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0190: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x01a0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x01b0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x01c0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x01d0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x01e0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x01f0: 0000 ..
11:41:44.719932 IP wsp165668wss.optus.com.au.51916 > focdevapph001.optus.com.au.25395: . ack 545 win 65535 <nop,nop,timestamp 858559006 42832251>
0x0000: 4500 0034 9811 4000 4006 c7a9 0a10 2945 E..4..@.@.....)E
0x0010: a12b 0689 cacc 6333 1f0d dc91 4f50 9058 .+....c3....OP.X
0x0020: 8010 ffff 3919 0000 0101 080a 332c 921e ....9.......3,..
0x0030: 028d 917b ...{
11:41:44.729113 IP wsp165668wss.optus.com.au.51916 > focdevapph001.optus.com.au.25395: P 541:805(264) ack 545 win 65535 <nop,nop,timestamp 858559006 42832251>
0x0000: 4500 013c fb6b 4000 4006 6347 0a10 2945 E..<.k@[email protected]..)E
0x0010: a12b 0689 cacc 6333 1f0d dc91 4f50 9058 .+....c3....OP.X
0x0020: 8018 ffff efcc 0000 0101 080a 332c 921e ............3,..
0x0030: 028d 917b 7390 3842 0000 0001 0000 0002 ...{s.8B........
0x0040: ffff ffff 0000 0000 0000 0000 0000 0001 ................
0x0050: 0000 0108 0000 0007 5754 435f 4f42 4600 ........WTC_OBF.
0x0060: 0000 0020 0000 0000 0000 0000 0000 0000 ................
0x0070: 0000 0005 464d 4c33 3200 0000 0000 0000 ....FML32.......
0x0080: 0000 000c 0000 000b 4753 4d5f 4765 7441 ........GSM_GetA
0x0090: 6363 7400 ffff d8f0 0000 00a8 7fff ffff cct.............
0x00a0: 0000 0008 0000 0000 0000 0010 0010 df9d ................
0x00b0: 0000 0001 0210 df93 0000 0001 0a10 df2f .............../
0x00c0: 0000 0009 0000 0001 0000 0000 0a10 df39 ...............9
0x00d0: 0000 001a 0000 0012 6236 3764 2d34 6666 ........b67d-4ff
0x00e0: 3631 6632 3139 3535 3700 0000 0a10 df43 61f219557......C
0x00f0: 0000 0009 0000 0001 0000 0000 0a10 df4d ...............M
0x0100: 0000 0014 0000 000c 4753 4d5f 4765 7441 ........GSM_GetA
0x0110: 6363 7400 0a10 dff7 0000 0009 0000 0001 cct.............
0x0120: 0000 0000 0a11 3e7b 0000 0012 0000 000a ......>{........
0x0130: 3132 3331 3133 3331 3400 0000 123113314...
11:41:44.768190 IP focdevapph001.optus.com.au.25395 > wsp165668wss.optus.com.au.51916: P 545:989(444) ack 805 win 32768 <nop,nop,timestamp 42832256 858559006>
0x0000: 4500 01f0 5e46 4000 3e06 01b9 a12b 0689 E...^F@.>....+..
0x0010: 0a10 2945 6333 cacc 4f50 9058 1f0d dd99 ..)Ec3..OP.X....
0x0020: 8018 8000 3762 0000 0101 080a 028d 9180 ....7b..........
0x0030: 332c 921e 7390 3842 0000 0002 0000 0002 3,..s.8B........
0x0040: ffff ffff 0000 0000 0000 0020 0000 0001 ................
0x0050: 0000 01bc 0000 0007 4f42 465f 5754 4300 ........OBF_WTC.
0x0060: 0000 0020 0000 0000 0000 0000 0000 0000 ................
0x0070: 0000 0005 464d 4c33 3200 0000 0000 0000 ....FML32.......
0x0080: 0000 0000 ffff d8f0 0000 012c 0000 1000 ...........,....
0x0090: 0000 0010 0000 0000 0000 0010 0a10 df2f .............../
0x00a0: 0000 0013 0000 000b 464f 585f 5359 5354 ........FOX_SYST
0x00b0: 454d 0000 0a10 df39 0000 000e 0000 0006 EM.....9........
0x00c0: 4475 6d6d 7900 0000 0a10 df43 0000 000c Dummy......C....
0x00d0: 0000 0004 464f 5800 0a10 df4d 0000 0014 ....FOX....M....
0x00e0: 0000 000c 4753 4d5f 4765 7441 6363 7400 ....GSM_GetAcct.
0x00f0: 0a10 dff7 0000 000d 0000 0005 5374 7562 ............Stub
0x0100: 0000 0000 0a11 3e77 0000 0010 0000 0008 ......>w........
0x0110: 3132 3334 2e35 3600 0a11 3e8a 0000 000f 1234.56...>.....
0x0120: 0000 0007 3334 352e 3637 0000 0a11 3e8b ....345.67....>.
0x0130: 0000 000f 0000 0007 3435 362e 3738 0000 ........456.78..
0x0140: 0a11 3e8c 0000 000f 0000 0007 3536 372e ..>.........567.
0x0150: 3839 0000 0a11 3e8d 0000 000f 0000 0007 89....>.........
0x0160: 3233 342e 3536 0000 0a11 3e9b 0000 000f 234.56....>.....
0x0170: 0000 0007 5379 646e 6579 0000 0a11 3e9d ....Sydney....>.
0x0180: 0000 0016 0000 000e 4d69 6c6c 6572 2053 ........Miller.S
0x0190: 7472 6565 7400 0000 0a11 3e9e 0000 0015 treet.....>.....
0x01a0: 0000 000d 4e6f 7274 6820 5379 646e 6579 ....North.Sydney
0x01b0: 0000 0000 0a11 3e9f 0000 000c 0000 0004 ......>.........
0x01c0: 4e53 5700 0a11 3ea1 0000 000d 0000 0005 NSW...>.........
0x01d0: 3230 3630 0000 0000 0a11 3ea8 0000 0013 2060......>.....
0x01e0: 0000 000b 4a6f 686e 2044 756d 6d79 0000 ....John.Dummy..
11:41:44.768327 IP wsp165668wss.optus.com.au.51916 > focdevapph001.optus.com.au.25395: . ack 989 win 65535 <nop,nop,timestamp 858559006 42832256>
0x0000: 4500 0034 b478 4000 4006 ab42 0a10 2945 E..4.x@[email protected]..)E
0x0010: a12b 0689 cacc 6333 1f0d dd99 4f50 9214 .+....c3....OP..
0x0020: 8010 ffff 3650 0000 0101 080a 332c 921e ....6P......3,..
0x0030: 028d 9180 ....
Unsuccessful call:
11:43:19.024968 IP wsp165668wss.optus.com.au.51916 > focdevapph001.optus.com.au.25395: P 805:1069(264) ack 989 win 65535 <nop,nop,timestamp 858559948 42832256>
0x0000: 4500 013c 081f 4000 4006 5694 0a10 2945 E..<..@[email protected]...)E
0x0010: a12b 0689 cacc 6333 1f0d dd99 4f50 9214 .+....c3....OP..
0x0020: 8018 ffff bd55 0000 0101 080a 332c 95cc .....U......3,..
0x0030: 028d 9180 7390 3842 0000 0001 0000 0003 ....s.8B........
0x0040: ffff ffff 0000 0000 0000 0000 0000 0001 ................
0x0050: 0000 0108 0000 0007 5754 435f 4f42 4600 ........WTC_OBF.
0x0060: 0000 0020 0000 0000 0000 0000 0000 0000 ................
0x0070: 0000 0005 464d 4c33 3200 0000 0000 0000 ....FML32.......
0x0080: 0000 000c 0000 000b 4753 4d5f 4765 7441 ........GSM_GetA
0x0090: 6363 7400 ffff d8f0 0000 00a8 7fff ffff cct.............
0x00a0: 0000 0008 0000 0000 0000 0010 0010 df9d ................
0x00b0: 0000 0001 0210 df93 0000 0001 0a10 df2f .............../
0x00c0: 0000 0009 0000 0001 0000 0000 0a10 df39 ...............9
0x00d0: 0000 001a 0000 0012 3862 3730 2d38 6337 ........8b70-8c7
0x00e0: 3234 6539 6432 3364 6400 0000 0a10 df43 24e9d23dd......C
0x00f0: 0000 0009 0000 0001 0000 0000 0a10 df4d ...............M
0x0100: 0000 0014 0000 000c 4753 4d5f 4765 7441 ........GSM_GetA
0x0110: 6363 7400 0a10 dff7 0000 0009 0000 0001 cct.............
0x0120: 0000 0000 0a11 3e7b 0000 0012 0000 000a ......>{........
0x0130: 3132 3331 3133 3331 3400 0000 123113314...
11:43:19.027592 IP focdevapph001.optus.com.au.25395 > wsp165668wss.optus.com.au.51916: P 989:1433(444) ack 1069 win 32768 <nop,nop,timestamp 42841681 858559948>
0x0000: 4500 01f0 5e47 4000 3e06 01b8 a12b 0689 E...^G@.>....+..
0x0010: 0a10 2945 6333 cacc 4f50 9214 1f0d dea1 ..)Ec3..OP......
0x0020: 8018 8000 0c1e 0000 0101 080a 028d b651 ...............Q
0x0030: 332c 95cc 7390 3842 0000 0002 0000 0003 3,..s.8B........
0x0040: ffff ffff 0000 0000 0000 0020 0000 0001 ................
0x0050: 0000 01bc 0000 0007 4f42 465f 5754 4300 ........OBF_WTC.
0x0060: 0000 0020 0000 0000 0000 0000 0000 0000 ................
0x0070: 0000 0005 464d 4c33 3200 0000 0000 0000 ....FML32.......
0x0080: 0000 0000 ffff d8f0 0000 012c 0000 1000 ...........,....
0x0090: 0000 0010 0000 0000 0000 0010 0a10 df2f .............../
0x00a0: 0000 0013 0000 000b 464f 585f 5359 5354 ........FOX_SYST
0x00b0: 454d 0000 0a10 df39 0000 000e 0000 0006 EM.....9........
0x00c0: 4475 6d6d 7900 0000 0a10 df43 0000 000c Dummy......C....
0x00d0: 0000 0004 464f 5800 0a10 df4d 0000 0014 ....FOX....M....
0x00e0: 0000 000c 4753 4d5f 4765 7441 6363 7400 ....GSM_GetAcct.
0x00f0: 0a10 dff7 0000 000d 0000 0005 5374 7562 ............Stub
0x0100: 0000 0000 0a11 3e77 0000 0010 0000 0008 ......>w........
0x0110: 3132 3334 2e35 3600 0a11 3e8a 0000 000f 1234.56...>.....
0x0120: 0000 0007 3334 352e 3637 0000 0a11 3e8b ....345.67....>.
0x0130: 0000 000f 0000 0007 3435 362e 3738 0000 ........456.78..
0x0140: 0a11 3e8c 0000 000f 0000 0007 3536 372e ..>.........567.
0x0150: 3839 0000 0a11 3e8d 0000 000f 0000 0007 89....>.........
0x0160: 3233 342e 3536 0000 0a11 3e9b 0000 000f 234.56....>.....
0x0170: 0000 0007 5379 646e 6579 0000 0a11 3e9d ....Sydney....>.
0x0180: 0000 0016 0000 000e 4d69 6c6c 6572 2053 ........Miller.S
0x0190: 7472 6565 7400 0000 0a11 3e9e 0000 0015 treet.....>.....
0x01a0: 0000 000d 4e6f 7274 6820 5379 646e 6579 ....North.Sydney
0x01b0: 0000 0000 0a11 3e9f 0000 000c 0000 0004 ......>.........
0x01c0: 4e53 5700 0a11 3ea1 0000 000d 0000 0005 NSW...>.........
0x01d0: 3230 3630 0000 0000 0a11 3ea8 0000 0013 2060......>.....
0x01e0: 0000 000b 4a6f 686e 2044 756d 6d79 0000 ....John.Dummy..
11:43:19.027720 IP wsp165668wss.optus.com.au.51916 > focdevapph001.optus.com.au.25395: . ack 1433 win 65535 <nop,nop,timestamp 858559948 42841681>
0x0000: 4500 0034 9c5b 4000 4006 c35f 0a10 2945 E..4.[@.@.._..)E
0x0010: a12b 0689 cacc 6333 1f0d dea1 4f50 93d0 .+....c3....OP..
0x0020: 8010 ffff 0b0d 0000 0101 080a 332c 95cc ............3,..
0x0030: 028d b651 ...Q
11:43:19.029667 IP wsp165668wss.optus.com.au.51916 > focdevapph001.optus.com.au.25395: F 1069:1069(0) ack 1433 win 65535 <nop,nop,timestamp 858559948 42841681>
0x0000: 4500 0034 9748 4000 4006 c872 0a10 2945 E..4.H@[email protected]..)E
0x0010: a12b 0689 cacc 6333 1f0d dea1 4f50 93d0 .+....c3....OP..
0x0020: 8011 ffff 0b0c 0000 0101 080a 332c 95cc ............3,..
0x0030: 028d b651 ...Q
11:43:19.030434 IP focdevapph001.optus.com.au.25395 > wsp165668wss.optus.com.au.51916: . ack 1070 win 32768 <nop,nop,timestamp 42841682 858559948>
0x0000: 4500 0034 5e48 4000 3e06 0373 a12b 0689 E..4^H@.>..s.+..
0x0010: 0a10 2945 6333 cacc 4f50 93d0 1f0d dea2 ..)Ec3..OP......
0x0020: 8010 8000 8b0a 0000 0101 080a 028d b652 ...............R
0x0030: 332c 95cc 3,..
11:43:19.030467 IP wsp165668wss.optus.com.au.51916 > focdevapph001.optus.com.au.25395: . ack 1433 win 65535 <nop,nop,timestamp 858559948 42841682>
0x0000: 4500 0034 8f72 4000 4006 d048 0a10 2945 E..4.r@[email protected]..)E
0x0010: a12b 0689 cacc 6333 1f0d dea2 4f50 93d0 .+....c3....OP..
0x0020: 8010 ffff 0b0b 0000 0101 080a 332c 95cc ............3,..
0x0030: 028d b652 ...R
11:43:19.030747 IP focdevapph001.optus.com.au.25395 > wsp165668wss.optus.com.au.51916: F 1433:1433(0) ack 1070 win 0 <nop,nop,timestamp 42841682 858559948>
0x0000: 4500 0034 5e49 4000 3e06 0372 a12b 0689 E..4^I@.>..r.+..
0x0010: 0a10 2945 6333 cacc 4f50 93d0 1f0d dea2 ..)Ec3..OP......
0x0020: 8011 0000 0b0a 0000 0101 080a 028d b652 ...............R
0x0030: 332c 95cc 3,..
11:43:19.030772 IP wsp165668wss.optus.com.au.51916 > focdevapph001.optus.com.au.25395: . ack 1434 win 65535 <nop,nop,timestamp 858559948 42841682>
0x0000: 4500 0034 403c 4000 4006 1f7f 0a10 2945 E..4@<@.@.....)E
0x0010: a12b 0689 cacc 6333 1f0d dea2 4f50 93d1 .+....c3....OP..
0x0020: 8010 ffff 0b0a 0000 0101 080a 332c 95cc ............3,..
0x0030: 028d b652 ...R -
E63 bluetooth connection request
Ola! How do I get my Nokia E63 to always accept the connection request from my laptop automatically? It's really frustrating when I'm syncing to have to accept about ten times. Thanks in advance for your help!
It would take awhile, but I would probably reinstall OS X 10.10 from the recovery disk.
Barry -
Would you accept a Linkedin connection request if you didn't know the person?
I accept people who I have done business with, friends and relatives. The only people on my linkedin that I don't know have previously added recruiters.
I'm now very happy and settled in my job though so have stopped allowing recruiters.Nelson9480 wrote:Apart from head hunters and recruitment firms, no I don't add anyone I don't at least vaguely know.01smicha wrote:No I wouldn't unless it was some form of recruiter.Scammers arealso creating fake or semi-fake business profiles. Fake LinkedIn companies canbe as dangerous as phony individuals. I’ve seen instances of fake companiesthat create fake jobs in an attempt to collect all kinds of data fromapplicants.Often people that are security conscious in general when itcomes LinkedIn requests may be less security conscious /strict when it comes tothese (sometimes fake) potential job related connection requests – after allthis could be the dream job, a missed opportunity. These scams manipulate our fearof missing out.
-
Accepting connection from client
Hello,
I want to create java server which accepts connection from client once and then continuously waits for request sent by client. Something same as select() call in C
Something of kind
Server.java:
Socket socket = server.accept();
while(true)
// listen for request ,
// if request received , create new thread for processing
// return response
I don't want to accept connection again and again
Edited by: tryit on Aug 29, 2008 11:41 PMThanks for the reply.
But even in this library, an new thread is created which keeps on doing accept() in while(true) and after accepting connection , another thread is created to do the processing.
But i want that once the connection is established between server and client i.e once accept() is done then just using that socket rest of processing i.e read()/write() is done , no need for accept() in while(true)
I have something like this
SenderReciever.java
public class SenderAndReciever
private ServerSocket server;
private int port = 6000;
public SenderAndReciever()
try
server = new ServerSocket(port);
catch (IOException e)
e.printStackTrace();
public void handleConnection()
try
Socket socket = server.accept();
/* PROBLEM AREA */
/* This while loop results in infinite loop .
* if i move Socket socket = server.accept() inside while then it accepts one connection
* returns a response but then waits for another connection to be accepted
* But i want connection once accepted , use the same socket for rest all communications
while (true)
new ConnectionHandler(socket);
catch (IOException e)
e.printStackTrace();
public static void main(String[] args)
SenderAndReciever senderAndReciever = new SenderAndReciever();
senderAndReciever.handleConnection();
}ConnectionHandler.java:
class ConnectionHandler implements Runnable
private Socket socket;
public ConnectionHandler(Socket socket)
this.socket = socket;
Thread t = new Thread(this);
t.start();
public void run()
try
readData();
processData();
sendData();
catch (Exception e)
e.printStackTrace();
} -
my iPod touch 5 is disyllable and it wants me to connect to iTunes. i connect to iTunes but it says i have to accept the invitation from my iPod witch is locked so what do i do?
Hello there Patss213,
If your iPod Touch is telling you to connect to iTunes and when you do, you are prompted to Trust the computer but are unable to due to the device being disabled, you will need to put the device into Recovery Mode and restore it with this article:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Keep in mind this will delete all information on the iPod, and you will need to restore it from a backup:
iTunes 11 for Mac: Update and restore software on iPod, iPhone, or iPad
iTunes 11 for Windows: Update and restore software on iPod, iPhone, or iPad
iCloud: Restore your iOS device from iCloud
Thank you for using Apple Support Communities.
All the very best,
Sterling -
I get this error message when trying to open and log into an online casino "The Remote device or resource wont accept connection, not set up to accept connection from port https".
I am on a desktop computer my connection to the net is with a USB Virgin Mobile hotspot device.
I also have issues with some downloads not installing right for instance SKYPE wont work. If the problems are related I don't know
ThanksStarting in Firefox 14, Firefox will guess an address and place it in the address bar (AutoFill feature). If you have ever connected to the site using a secure (HTTPS) connection, then Firefox will try to connect security to the address suggested by the AutoFill feature. To work around this you can:
* Edit the address to force Firefox to interpret your entry literally. For example, if there is a trailing / you can remove it.
* Turn off the URL bar AutoFill feature and just use the AutoSuggest drop-down.
* Clear Firefox's memory of the site so it doesn't default to a secure connection (however, this also removes any bookmarks you have to pages on the site).
To disable the in-address-bar autofill without losing the suggestions that appear below the bar:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''autofill''' and pause while the list is filtered
(3) Double-click '''browser.urlbar.autoFill''' to toggle it from true to false. You're done with about:config and you can close this tab.
"Forget about this site" will clear cache, history, bookmarks, and permissions for the site, and probably any saved certificate. There are two ways to get to this:
* History > Show All History, right-click an entry for the site > "Forget about this site"
* Type or paste about:permissions in the address bar and press Enter, then select the site from the list on the left side, and click the "Forget about this site" button on the right side
Depending on the size of your history and cache, this may lock Firefox up for a minute or two while everything is cleansed. -
Unity Connection 10.5.1: I upgraded the Unity Connection Server from V 9.1. After that, cannot logn to ELM an error message " The server encountered an internal error that prevented it from fulfilling this request." appears. The error further displays "
type: Exception report
message:
description: The server encountered an internal error that prevented it from fulfilling this request.
exception:
ServletException Could not initialize class com.cisco.vos.platform.api.config.UpgradeStatus
root cause:
NoClassDefFoundError Could not initialize class com.cisco.vos.platform.api.config.UpgradeStatus
note: The full stack trace of the root cause is available in the logs.
Has anyone experience this issue? Any solutions? Your assistance is greatly appreciated!Hi Mesut,
you can refer the link for migration
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/10x/upgrade/guide/10xcucrugx/10xcucrug010.html
regds,
aman -
hi you know i can't make the MIDI connection network from my iMac to my iPad 3 appears 192.168.1.69:5004 refused the connection request. ill appreciate so much your help I'm trying to do it with the animoog for iPad
Hi James and welcome.....
Try the help here for Windows 7.
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
Carolyn -
How do I accept a request?
Hi kmarm,
Welcome to the Support Communities!
I would suggest deleting the app from your iPhone and redownloading it:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
Cheers,
- Judy -
Accepting connection from multiple client
Hi, i try to open a port on the server and allows others client to connect to this port and sent in data. It works well when it's 1 server to 1 client relationship. But when i turn on 1 server to many client connection where all the client will connect at the same time... none of the client data were capture in the server. Here is my code :
Server code:
static class Listener extends Thread
public void run()
ServerSocket svrSocket;
Socket soc;
try
svrSocket = new ServerSocket(20);
System.out.println("---------------------------------------");
soc = svrSocket.accept();
System.out.println("---------------------------------------");
BufferedReader in = new BufferedReader(new InputStreamReader(soc.getInputStream()));
String strTest;
while((strTest = in.readLine()) != null)
System.out.println("SEE THIS !!!!!!!!!!!!! " + strTest);
catch(Exception e)
e.printStackTrace();
Client code:
socClient = new Socket("10.1.8.101", 4444);
outPrintWriter = new PrintWriter(socClient.getOutputStream(), true);
outPrintWriter.println(strWrite);
Can anyone help me??? IT"S URGENT....
THANKSYour code will only handle one connection at a time currently. To handle more connections it needs to be reorganized, see below. Also, you may be having a problem with binding port 20 in your server and trying to connect to port 4444 in your client. These ports obviously have to be the same or its never going to work at all! :-)
Without getting into thread pools and stuff, this is a sample of how you might want to organize your server.
import java.net.*;
import java.io.*;
import java.util.*;
public class SocServ implements Runnable {
// running flag set to false to stop server.
public static boolean isRunning=true;
// set of servicing threads, if needed.
private static Set servicers = new HashSet();
public void run() {
ServerSocket svrSocket;
Socket soc;
Thread t;
// open the server socket, error if port is in use, etc.
try {
svrSocket = new ServerSocket(4096);
// accept connections, and start new SocServicer threads.
while (SocServ.isRunning) {
soc = svrSocket.accept();
t = new Thread(new SocServicer(soc));
SocServ.servicers.add(t);
t.start();
// server finished, close socket
svrSocket.close();
} catch (IOException e) { e.printStackTrace(); }
import java.net.*;
public class SocServicer implements Runnable {
// socket connection being serviced...
Socket s;
public SocServicer(Socket soc) { s=soc; }
public void run() {
if (s==null) { return; } // for sanity
* Do all the interaction with each socket here.
}The idea is to run one thread that listens for connections and then spawn new threads to process each connection. This way one connection does not have to wait for the previous one to finish. For a serious application you will probably want to do some more careful management of the SocServicer threads [because each thread eats up memory & resources].
Maybe you are looking for
-
How do I perform an IMEI swap from one iPhone to a new iPhone5?
I purchased 2 iPhone 5's. 1 white and 1 black. I picked up the white one the day after the release. I have been using it for a few weeks and have now just received the new black one. I would like to utilize the black one for myself and give the w
-
Migrating from Powerbook G4 to Macbook Pro - Anything I need to know?
I'm about the begin the process of migrating from one computer to the other. I have cleaned/tidied up my powerbook, tossing old files and making sure all is in order. Is there anything special I need to know? Here are my specific questions before I g
-
QuickTime with Transparent Background
> This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. --B_3234432307_151173 Content-type: text/plain; charset="ISO-8859-1" Content-transfer-encoding: 8bit Hi I am hav
-
Remaining Work not showing Correctly in CN47N
Dear Experts, My case is as following. 1.I Define amount of work 1 M3 in an activity in CJ20N 2.I confirmed 2 M3 of work, and it executed correctly. 3.I changed amount of work to 5 M3. Remaining work should be 3, But its showing
-
Dear Experts , I am facing a wierd problem. In any F4 selection screen , if i put ant inputs the system gives the message "No values for this selection" But as soon as remove the input selsction restrictions the system gives a list containing all the