Accept invitation displays blank screen???

I removed a seat, then re-added a new user under team membership.
When that user received the invitation and clicked accept, the white welcome area in the browswer window displays the company name and 1. 2.... then blank with nothing to click.
ie. nothing to click to accept
Have tried resending link 3 times + a completely different user account to no avail.
Have also tried both Safari and Firefox + restarts.
Nothing works... Adobe tech was also at a loss.
Please help

Just off the phone with Adobe... after 2 hours #$%!
They are aware of an issue / problem at there end as of today and are working to resolve it.
The tech told me to try again in a few hours.
When they contact me to report problem resolved I will post here.

Similar Messages

Theme Editor displaying blank screen

Hi,
I am having SAP NetWeaver 7.0 (2004s). when i login with adminstrator ,2 weeks back i am able to see the Theme Editor with all the Themes but now i am NOT able to see anything. Its just displaying blank screen. Please let me know how i will get the themes again.
Thanks,
Kumarbabu

Hi,
Please don't user Mozilla firefox if you are using, try again with IE browser.
If issue still exists check the existence of respected iviews.
Please reply if your issue is fixed and how.
Regards,
Amit

Transaction launcher displaying blank screen (Empty without any fields)

Hi Experts,
                   Recently we have done the upgardation from CRM 2007 to CRM 7.0. In our old version we have configured Transaction launcher and everything was fine. But we are facing an issue with transaction launcher calls in our new system. Apart from the existing TL configuration below are the steps did in the new system (after upgradation).
1. Activated the Webgui ITS service from the path sap/bc/gui/sap/its/webgui in the remote system (ERP) through SICF.
2.Published the internet service SHUFFLER, SYSTEM, WEBGUI through SE80 in the remote system.
3.checked the configuration for logical system in transaction CRMS_IC_CROSS_SYS and the URL of ITS is in the form of
   http://<host>:<port>/sap/bc/gui/sap/its/webgui/!?transaction=IC_LTXEokcode=ICEECUTE
Till this part every thing looks fine and if execute the URL in the browser, it is taking me to the ERP system login screen and i am able navigate to any transaction.
But if i login to CRM interaction center and clicking on the TL links, its not displaying any login screen( Remote system) and not even displaying any message or any fields. Its just displaying a blank screen (White Screen) in the same window.
Please provide your valuable suggestion to resolve this issue. Thanks
Regards,
Laxman.P

Hi,
     sorry, it was a typogrpahical error in my query. I have mentioned the correct link in my customization
       http://<server>:<port>/sap/bc/gui/sap/its/webgui/!?transaction=IC_LTXE&okcode=ICEXECUTE
Regards,
Laxman.P

HP Envy M6, Fan Turn off after 2 seconds, No Display, Blank Screen with Light

Hi,
I have HP Envy M6 15" Laptop with Intel Core i5,
Few days ago, I get a problem with my laptop, below are the symptome when I push my laptop power button:
1) Screen backlight on but no display on screen
2) Fan turns on for 2 seconds, and then turn off
3) Power light stay on as long as I again push the power button again
4) Wifi light turn "Orange"
5) Harddrive, and DVD drive shows sign of power-on for the whole period, even I can eject the DVD tray...
But get no display on screen, even when I connect with external screen, and fan stays off.
Can i get any help from experts out there?
Thanks
Sohaib

@SohaibAfzal
Have you tried connecting an external monitor to your notebook, to see if there is a display?
Since your computer does not automatically shut down again until you press power again, it is possibly the display itself that is the problem.
Troubleshooting Black Screen Displays with No Error Messages During Startup or Boot
When it does start up, are there any repeating flash patterns on the LEDs or beep patterns?
Computer does not start and the LEDs blink or the computer beeps
Here are some other sources I found that may be helpful to you.
Resolving Problems with Notebook Displays (Windows 7 and Windows 8)
Resolving Problems with the Brightness of the Display
Diagnosing a Liquid Crystal Display (LCD) for Damage
This page is more informational about displays, for your reference.
About LCD Panel Defects and Terminology for HP Pavilion or Compaq Presario Notebook PCs
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

HELP with Satellite Series - P305-S8837; displaying blank screen with cursor

Help! I have a the P305-S8837 laptop in the Toshiba Satellite Series. I have had the laptop for several months now and it's been working fine until now. I was using it this morning (on the internet) and it started freezing up and so I hit Crtl + Alt + delete and selected the option to restart. It restarted and asked which mode I wanted to start it up in (safe mode, safe mode w/networking, etc.) and I selected the normal option. It started out fine - little windows logo came on with the sound and then went into the Welcome Windows Home Vista premium page (that's like bluish greenish) and then afterwards the screen just goes blank with the exception of the mouse cursor. I let it sit for about an hour and there was no change. I have tried pressing the Crtl + Alt + delete and that has had NO affect. So i manually turned it off and then back on using the power button and tried starting it up in Safe mode w/networking and then just safe mode - both are able to get to the welcome screen but after that it's just a blank screen with cursor and it says safe mode and stuff on the border. Crtl + Alt + delete does not work in the safe mode w/networking but in just the regular safe mode it will go to that same screen that is the welcome and ask if I want to lock the computer, change users, start task manager or restart / shut down. I have selected the restart option and nothing happens and then the Crtl + Alt + delete option no longer works. I have tried manually starting the laptop with the battery unattached and just using the AC Adapter and that has had no impact. I have tried just using the laptop's battery only with no AC Adapter and that has had no impact.
As you can see, I am in desperate need of some assistance! Please tell me what to do!
Thanks

Satellite P305-S8837
Turn the computer on and immediately press and hold the F8 key.
On the Advanced Boot Options menu, choose Repair Your Computer.
When you reach the System Recovery Options menu, choose Startup Repair.
If that doesn't do the trick, go back to the System Recovery Options menu and do a System Restore.
If that doesn't fix things either, go back to the System Recovery Options menu, choose Command Prompt, and follow the directions here
How to use the Bootrec.exe tool in the Windows Recovery Environment to troubleshoot and repair start...
Good luck!
-Jerry

IPad mail app displays blank screen, then crashes

When I go to my aPad mail app, there is just a blank screen, After a few seconds, the app crashes. I can't delete the app because it appears to be "built in". my mail works fine on MacBook Pro and Nook.

Hi A436,
Thank you for contributing to the Apple Support Communities.
If you only see a blank screen in Mail, and then the app quits, try removing and re-adding your mail accounts from Settings > Mail, Contacts, Calendars.
You can use these steps from Get help with Mail on iPhone, iPad, and iPod touch:
Tap Settings > Mail, Contacts, Calendars.
Tap the affected email account.
Tap Delete Account.
Add your account again.
If the Mail app still quits unexpectedly after this step, you may need to back up your iPad and restore the iOS software:
Use iTunes to restore your iOS device to factory settings - Apple Support
Sincerely,
Jeremy

HELP PLZ, there is no display ,blank screen when i turn on

hey guys..
AM using Macbook pro. when i turn on, i cannt see any thing,its dark,i can hear sound but no display..how do i solve this problem..
what will be the repairing expenses and why i got this problem???..

Welcome to Apple Discussions
You have no boot volume - could indicate HD failure (or you somehow damaged/erased the system folder). You can try a restore at home... Restart holding command+r and restore your OS X. If that doesn't work yes you should take it to Apple.

Module loaded from TabNavigator tab displays blank screen

I have an application which is using the TabNavigator to manage the active view content. The tabs are backed by individual VBox's which contain the
mx:ModuleLoader commands to load the module swf's. The application runs and the appropriate tabs are displayed.
When clicking on the various tabs, I know that the Ready ModuleEvent is getting fired and that the module projects default mxml class is being loaded and executed. However, the view content of the module is never displayed in the browser.
The following is a clip from the code block:
        <mx:TabNavigator id="mainMenuTabBar" width="100%" height="100%" creationPolicy="auto" tabStyleName="tab">
            <mx:VBox id="moduleOneTab" label="ModuleOne" creationPolicy="auto" width="100%" height="100%">
                <mx:ModuleLoader id="testLoader" url="testModuleOne.swf"
                        preinitialize="testLoader.applicationDomain=ApplicationDomain.currentDomain" />
            </mx:VBox>
            <mx:VBox id="moduleOneTab" label="ModuleOne" creationPolicy="auto" width="100%" height="100%">
                 <mx:ModuleLoader id="testLoader" url="testModuleOne.swf"
                             preinitialize="testLoader.applicationDomain=ApplicationDomain.currentDomain" />
             </mx:VBox>
       </mx:TabNavigator>
Any suggestions would be greatly appreciated.
Brian

I have an application which is using the TabNavigator to manage the active view content. The tabs are backed by individual VBox's which contain the
mx:ModuleLoader commands to load the module swf's. The application runs and the appropriate tabs are displayed.
When clicking on the various tabs, I know that the Ready ModuleEvent is getting fired and that the module projects default mxml class is being loaded and executed. However, the view content of the module is never displayed in the browser.
The following is a clip from the code block:
        <mx:TabNavigator id="mainMenuTabBar" width="100%" height="100%" creationPolicy="auto" tabStyleName="tab">
            <mx:VBox id="moduleOneTab" label="ModuleOne" creationPolicy="auto" width="100%" height="100%">
                <mx:ModuleLoader id="testLoader" url="testModuleOne.swf"
                        preinitialize="testLoader.applicationDomain=ApplicationDomain.currentDomain" />
            </mx:VBox>
            <mx:VBox id="moduleOneTab" label="ModuleOne" creationPolicy="auto" width="100%" height="100%">
                 <mx:ModuleLoader id="testLoader" url="testModuleOne.swf"
                             preinitialize="testLoader.applicationDomain=ApplicationDomain.currentDomain" />
             </mx:VBox>
       </mx:TabNavigator>
Any suggestions would be greatly appreciated.
Brian

Blank Screen in Output Display

Hi All,
I have a report output with REUSE_ALV_HIERSEQ_LIST_DISPLAY with custom PF Status and i have a custom button which call a CLass (Which perform some function at the background which the user doesn't notice) afterreturning from class
but now it displays a blank screen.
To overcome come this i called PERFORM OUTPUT again immediately after calling the class , now it diplays the out screen and user doesn't notice any difference but the problem is when i press the BACK button now it displays blank screen the back button.
When ever the control returns after calling the class it displays a blank screen
form output.
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
      EXPORTING
        i_callback_program       = v_repid
        i_callback_pf_status_set = 'SET_PF_STATUS'
        is_layout                = s_layout
        it_fieldcat              = t_fieldcatalog
        i_callback_user_command = 'USER_COMMAND'
        i_tabname_header         = 'Itab'
        i_tabname_item           = 'Itab1'
        it_events                = t_events
        is_keyinfo               = s_keyinfo
*        i_buffer_active          = 'A'
      TABLES
        t_outtab_header          = itab
        t_outtab_item            = itab1
      EXCEPTIONS
        program_error            = 1
        OTHERS                   = 2.
endoutput
Thanks in advance.

Hi
1.Check if v_repid is populating correctly or not
2. pass ITAB & ITAB1 in capital letters
        i_tabname_header         = 'ITAB'
       i_tabname_item           = 'ITAB1'
Hope this will solve the error.

In my Macbook Pro, on a few occassions, the apple menu bar blacks out. its displayed as a negative image. The desktop wallpaper get greyed out and i get a blank screen as wallpaper. No idea why this happens. I reset the system and issue gets resolved.

In my Macbook Pro, on a few occassions, the apple menu bar blacks out. its displayed as a negative image. The desktop wallpaper get greyed out and i get a blank screen as wallpaper. No idea why this happens. I reset the system and issue gets resolved.

AshwinVC wrote:
I reset the system and issue gets resolved.
How?

How can I display the first frame of my video as opposed to a blank screen?

hy as write in the title I would display a frame of my video instead blank screen...
this the code that i've implemented...
could you help me pls
ciao
a
<div id="flvplayer">
        <object id="myFlvPlayer" classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="200" height="200">
        <param name="movie" value="../flv_player/player.swf" />
        
        <object type="application/x-shockwave-flash" data="static/org_minervaeurope_museoweb/flv_player/player.swf" width="200" height="200">
        
        <param name="allowfullscreen" value="true" />
        <param name="autostart" value="false" />
        <param name="flashvars" value="&file=../../../MW/mediaArchive/Video/caracallaPAL55.flv&autostart=false&restart=tr ue" />
            
        </object>
        
    </object>
</div>

Switch to filmstrip view and zoom in.

Blank screen after display driver update Satellite Pro P200

I installed the latest ATI Mobility Radeon HD2600 display driver (8.432, from the Toshiba site via Tempo) on my Satellite Pro P200 yesterday. On rebooting everything looks fine as far as the Windows Vista Business "Please wait ..." screen, but instead of displaying the login page I get a blank screen (with a mouse cursor that moves around as normal). All I can do at this point is power off, and I've run out of ideas on how to get any further.
Things I've tried:
# booting into safe mode, low-resolution video or last known good configuration all result in the same blank screen.
# connecting to the system using remote desktop (to disable the driver) isn't possible because the system hasn't loaded the network drivers yet.
# I can't revert to a restore point because Vista can't find any (I made a manual one after installing windows updates on a couple of days ago).
I can run a command prompt from the system recovery options and would prefer to use that to disable the driver +if+ I knew how before resorting to the more drastic options.
A web search (http://www.google.co.uk/search?q=ati+catalyst+vista+blank+screen&hl=en&sa= N) reveals that this has happened on a wide range of laptops with
previous releases of the driver, but none of the links I've looked at give a solution that's available to me.

No joy with an external screen so I bit the bullet and reinstalled from the product recovery disk. I tried expert mode to retain the data partition but that failed twice, so I had to restore it from the previous day's backup after doing a full reinstall. Two consolations, though.
# It allowed me to increase the size of the data partition.
# The display driver update worked fine on the fresh install.
Needless to say I've since found [http://support.microsoft.com/kb/927525] which describes how you can disable a problem device driver (atikmdag in my case) from the system recovery command prompt :-(
Hopefully the instructions in there will help anybody who gets caught with similar problems.

Duo Displays Problem on MacBook Pro (13-inch, Mid 2012) Resolution 2560x1440 and 1280x800, Sometime 2560x1440 is blank screen and must restart to fixed it

Dear all,
I found some problems for using Duo Displays with MacBook Pro (13-inch, Mid 2012) display and Samsung UHD Display (U28D590). I use resolution on my macbook is 1280x800, Samsung UHD Display is 2560x1440 And Connect with Display port to mini display port.
But I use sometime found always blank screen on Samsung Display and I tried to unplug mini display port and plug it again but it is not working until I shutdown and restart my macbook pro, my display back to working.
I want to fix this problem because it is very trouble for my working a lot.
Thank you very much
Phot

The symptoms I'm getting now, and I'm not sure if they're any different, suggest that for some reason Mountain Lion thinks my display resolution is higher than what it is, as wether I'm turning AirPlay on or off, it keeps changing it (on the MacBook) to what looks like maybe 1080p.

My 24" iMac display suddenly shows blank screen with funny pattern

My 24" iMac display suddenly shows blank screen with funny pattern after bootup. Anyone know the cause? http://twitpic.com/51hih7 http://twitpic.com/51hihw http://twitpic.com/51hiiv

My 24" iMac display suddenly shows blank screen with funny pattern after bootup. Anyone know the cause? http://twitpic.com/51hih7 http://twitpic.com/51hihw http://twitpic.com/51hiiv

I connect my Macbook 13" to my thunderbolt to display on my HD television but it keeps asking for a KeyChain password for "user-hp". My key keychain password is nothing but it does not want to accept and not display my screen to the Television. Suggestion

I connect my Macbook 13" to my thunderbolt to display on my HD television but it keeps asking for a KeyChain password for "user-hp". My key keychain password is nothing but it does not want to accept and not display my screen to the Television. Suggestion

Apple support article:
Mail Keeps Asking for Password
Maybe this will help. If you monitor the "More Like This" box (top right), other threads appear. Opening them usually displays other threads.
https://discussions.apple.com/message/20549403#20549403

Accept invitation displays blank screen???

Similar Messages

Maybe you are looking for