Accept Mail from another server

We are testing a migration scenario and are running into a few issues. I have our new mail server setup with the same domain as our old. We will slowly be migrating from the old to the new, sort of like a split domain. The old server is running GroupWise 7, the new is Zimbra based.
What I am attempting to do is allow for users on Zimbra (using the same domain) to be able to send messages to users on Groupwise. So far I have been unable to find a setting in GWIA that allows me to say it is "ok" to accept email from this server. I believe that since both the Zimbra and GW servers are using the example.com domain GW is not allowing messages to go to mailboxes.
How do I setup Groupwise to allow messages from another server using the same domain?

I doubt that is it. Your GW system is set to receive messages for
@example.com and shouldn't care where they have come from. Your Zimbra
server should be set to forward to GW as a smarthost and have it forward
undeliverables to that host.
Usually, the Zimbra side is going to have problems, especially if it has all
of the addresses configured on it. It knows that it handles email for
example.com and will try to deliver it to itself, unless you do something
with undeliverables instead.
I think.......................
"dabrown ksu" <[email protected]> wrote in message
news:[email protected]..
>
> We are testing a migration scenario and are running into a few issues. I
> have our new mail server setup with the same domain as our old. We will
> slowly be migrating from the old to the new, sort of like a split
> domain. The old server is running GroupWise 7, the new is Zimbra based.
>
> What I am attempting to do is allow for users on Zimbra (using the same
> domain) to be able to send messages to users on Groupwise. So far I have
> been unable to find a setting in GWIA that allows me to say it is "ok"
> to accept email from this server. I believe that since both the Zimbra
> and GW servers are using the example.com domain GW is not allowing
> messages to go to mailboxes.
>
> How do I setup Groupwise to allow messages from another server using
> the same domain?
>
>
> --
> dabrown_ksu
> ------------------------------------------------------------------------
> dabrown_ksu's Profile: http://forums.novell.com/member.php?userid=90079
> View this thread: http://forums.novell.com/showthread.php?t=415905
>

Similar Messages

Mail 2.1.1: Can't read mails from Exchange server

Effect: *Mail 2.1.1* contacts the Exchange server successfully, which I checked with the operator, looking directly over his shoulder, but Mail 2.1.1 does not load any e-mails. Mail 2.1.1 loads down mails from another server with unknown software (gmx.de) successfully.
Mail 2.1 works nicely with absolutely identical settings with both mail servers
I am using Mail 2.1.1/MacOS 10.4.10 on my G4 and MacBook Pro, Mail 2.1/MacOS 10.4.10 on my G5.

No solution found - works again. Please no questions.

How do I configure OS X Server (Mountain Lion) to deliver mail from another domain to my mailbox?

How do I configure OS X Server (Mountain Lion) to deliver mail from another domain to my mailbox?
I run a personal Server at my office. It's configured under my own domain as server.mydomain.com. It's setup that it properly receives and sends e-mail for mydomain.com. I use my own mailbox [email protected] to get all my personal mail.
I'm looking to add another domain as a secondary way for people to get to my content and information.
I want the same address [email protected] and [email protected] to arrive in the same mailbox at my server.
How do i do that?

it does look like you can add virtual domains in the GUI of Server.app on at least some versions, but I don't have an OS X Server 10.8 version handy to check.
I'd encourage spending some time to learn the command line. In general, the payoff for learning the command line will be worth the effort expended. You're running a mail server here and sooner or later the capabilities of the GUI will fail you. This whether due to a configuration omission in the GUI itself, or due to the need to troubleshoot a malfunctioning mail server, a need to automate one or more of the Postfix-related sequences, or some other IT-related task. Entirely FWIW, of course.
Here's a cut-and-paste of the sequence just used to test the command line access to the Postfix configuration, first fetching the current value, appending example.com as the second domain, then displaying the new value, then restarting the Postfix server. Don't enter the dollar signs; just the postconf command and following. Adjust example.com to match your domain...
$ postconf mydestination
mydestination = $myhostname, localhost.$mydomain, localhost
$ sudo postconf -e 'mydestination = $myhostname, localhost.$mydomain, localhost, example.com'
Password: {your admin password here}
$ postconf mydestination
mydestination = $myhostname, localhost.$mydomain, localhost, example.com
$ sudo postfix reload
The Postfix and Postconf commands work irrespective of the OS X Server version; the tools reference the data files as needed.

When I try to send e-mail I get an error message stating that the e-mail address was rejected by the server. When I send to e-mail from another address, I get back an error saying the e-mail address is unknown. My e-mail has worked fine for years until

When I try to send e-mail I get an error message stating that the e-mail address was rejected by the server. When I send to e-mail from another address, I get back an error saying the e-mail address is unknown. My e-mail has worked fine for years until yesterday. HELP!

The specific text of the error message is very important here — I'm not sure exactly you're encountering here.
If you're able to connect to your email server and are able send email to other email addresses and if the failures are specific to one email recipient address, then please contact the intended recipient of the failing email, and confirm their address is valid. (This is the way I'm reading your question.)
If you are unable to send any email to any other email addresses and this is specific to your email address, then try the web mail client interface (if one is available) to verify your login user and password, and check with your email ISP for assistance. If your email password works via web mail, follow this Apple troubleshooting guide, then — if everything else fails — I'd probably then entirely remove the email account from Mail.app and re-add it per your email ISP's particular setup requirements. (Some issue with the setup or maybe a corrupt setting in OS X or a problem at the mail ISP servers is a common problem, but this effects attempts to send to all email addresses via that account.)
An email account setup is specific to an email provider, unfortunately. If you're using one of the more common email ISPs, then there are usually setup guides and frequently-asked questions posted online.

How to remove my icloud mail from icloud server ?

how to remove my icloud mail from icloud server ?

If you don't want to keep it, select it, on the iCloud website Mail page click the Trash icon in the toolbar to move it to the Trash, then click the cogwheel icon at top right and choose 'Empty Trash'. Or in the Mail application drag the messages to the Trash and from the Mailbox menu choose 'Erase deleted items' then 'iCloud'.
If you want to keep it, in the Mail application drag the messages to another mailbox under 'On My Mac'.

How do I import email messages from another server?

Heya,
So I can't figure out how to import mail messages from another server into this one? I had [email protected] pointing to the old one, when I repointed it obviously all my email "disappeared" because there is none on the new server. So how do I move it from the old server to the new one? Usually I'd just drag and drop the email message files over FTP but SLS doesn't seem to give me permission to do that on this one.
Thanks!

Search for discussions of the imapsync tool.

Trying to connect db server from another server

Hello team,
Today i tried to connect db server(Named instance) from another server and that was failed. im getting below error
any one help on this will be appreciated.
unable to check connection to the repository The Tcp/Ip connection to the host server, port 1433 has failed.
Error: "connection refused: connect. verify the connection properties. Make sure that an instance of sql server is running on the host and accepting Tcp/Ip connections at the port. make sure that Tcp connections to the port are not blocked bya firewall.

Hello,
Normally "Connection Refused" is caused by firewalls actively closing the requests. Also, please note that by default named instances use dynamic ports and do not listen on 1433. If you are using dynamic ports, make sure the browser service is started and
that UDP 1434 is allowed for browser service communication.
Sean Gallardy | Blog |
Twitter

Hi, i am trying to open and view a report that comes from another server with different odbc connection

hi, i am trying to open and view a report that comes from another server with different odbc connection
i created a crystal report for a mysql database on my machine and everything works great
but we have other reports that come from other machines with different odbc connection
and this its not working when opens the report asks for credentials
and i cannot use the remote ip for these reports that come from other machine
question
if i cannot connect to remote ip to open the report
for each report i have to create a database the report database on my machine and then open the report ?
or there is some other way to open the report ?
i am using visual studio 2013 and mysql and
<add key="MYSQLODBCDRIVER" value="{MySQL ODBC 5.3 UNICODE Driver}"/>
thanks

short
i have a report that it was created on another server with a specific dsn
now i am trying to open the report on my machine
the database from the other server does not exist on my machine
the server machine where the report was created the ip its not accessible
question ?
can i open the report on my machine or its impossible ?
thanks

Problem in accessing the media files from another server

Currently I am working in a project with streaming video on demand and using FMS 4.5.
Let’s say the FMS is installed on one machine say ‘121.123.35.34’ and there is another server ‘100.54.88.222’ where all the media files belong. Now we need to point to this third server to play videos from FMS.I have done the below changes:
In the fms.ini file: set the VOD_DIR2 = \\100.54.88.222\myvideos
In the application.xml: Added the stream: <Streams>/hr;${VOD_DIR2}</Streams>
From my application accessing the path of flv as:source= “rtmp:// 121.123.35.34:1935/vod/hr/test” . Not able to access the video.
Note: If I will point to say ‘C:hrvideos’ in VOD_DIR2, then I am able to access the videos using the same URL.
I also tried mapping the shared path to the FMS machine and then given the mapped drive path in the VOD_DIR2, but this also doesn’t work.
Please let me know:
If we need to configure any other parameter to stream videos from another server.
VOD_COMMON_DIR: I modified this similar TO VOD_DIR to location 'C:hrvideos', I am able to stream the videos using rtmp, but not abl eto stream with http.
          Please let me know can we stream using http also as we need this to run f4m manifest file.
          http://121.123.35.34:8134/vod/hr/sample.mp4.
          http://121.123.35.34:8134/vod/hr/sample.f4m
Thanks,
Anjali

Hi Shiven,
I followed the steps suggested by you:
1) Changed the stream:
<Streams>/hr;${VOD_DIR2}</Streams> to<Streams>/;${VOD_DIR2}</Streams>
But not able to access the video with rtmp:// 121.123.35.34:1935/vod/test
2) For http streaming, changes the HttpStreamingContentPath in hds-vod in the httpd config file, and tried to stream the video like:
http:// 121.123.35.34:8134/vod/test.mp4 or
http:// 121.123.35.34:8134/hds-vod/test.mp4
But not able to load the video.
Please suggest?
Thanks & Regards,
Anjali Rawat

HT4859 After the i-cloud server issue Nov 26, 2012, I had to change some mail account settings to get my i-cloud mail to work again. However, all of my received e-mails are gone. How do I retrieve my e-mails from the server?

After the i-cloud server issue yesterday, November 26, 2012, my i-cloud mail account on my Macbook Pro stopped receiving mail. I changed some mail account settings to fix the issue, and was able to start receiving e-mails. However, all of my historical e-mails are gone. How do I retrieve all of my old e-mails from the server?

What settings did you change, what were the changes, have you visited www.icloud.com to see what mail is actually there? and do you have a backup?

How to fecth the contents of a mail from the server by using jsp

hi
Can any body tell me how to fetch the contents of mail from the server by using javamail api...please send me code if some one have
bye.

hi
Can any body tell me how to fetch the contents of mail from the server by using javamail api...please send me code if some one have
bye.

How to update a table (CUSTOMER) on a Report Server with the data from the same table (CUSTOMER) from another server Transaction server?

I had an interview question that is:
How to update a table (Customer) on a server ex: Report Server with the data from the same table (Customer) From another server ex: Transaction server?
Set up steps so inset, update or delete operation takes place across the servers.
It would be great if someone please enlighten me in details about this process in MS SQL Server 2008 R2.
Also please describe would it be different for SQL Server 2012?
If so, then what are the steps?

I had an interview question that is:
How to update a table (Customer) on a server ex: Report Server with the data from the same table (Customer) from another server ex: Transaction server?
Set up steps so that inset, update or delete operation gets done correctly across servers.
I was not sure about the answer, it would be great if someone please put some light on this and explain in details about this process in MS SQL Server 2008 R2.
Also it would be very helpful if you please describe would it be different for SQL Server 2012? If so, then what are the steps?

Loader will load images from another server, but then we get error on Bitmap operation

I'm developing an app that currently is using Loader to get images from another server. This shouldn't currently work since we are still waiting for the owner of that server to put a crossdomain file in place. However, it does work -- sort of .
Loader can load the images fine, without an error. But then the app has a feature in which we are making a larger duplicate of the image to display in a sidebar, we do this in this manner:
var myBitmap:Bitmap = Bitmap(loader.content);
and when this runs we get a Flash player security error 2122, sandbox violation.
So while I'm hoping all this will fix itself when the crossdomain.xml file is put in place, I'm confused as to why we only get the sandbox error when we make a Bitmap from the image, and not when we initially try to retrieve the image.
(Incidentally: is there a better way to make a "copy" of an image loaded by a Loader, and then change its width and height for simultaneous display in another part of the stage? I don't need to change its actual dimensions -- I just need to change its display width and height.)
Thanks!

The sandbox allows viewing, not editing from another server without a crossdomain.
So, when you try to load it up, it loads it, but "read-only" and gives you an error when you try to "edit" it by making a new Bitmap out of it.
This should resolve itself once that crossdomain is in place.
||EDIT||
I just realized I should clarify my statement a little more.
When you load images from another server without a crossdomain, it allows the load for display only. When you try to load data, it will fail. This is because, XML data, or some other type of data is editable by default, and images are only viewable by default. So, the image fails when you try to convert it into an editable form.

Reading mails from Hmail Server

hi all,
I am using an java mail api to read mails from a hmail server.I was successfull in reading mails and analysing it further but the problem that i face is my program could read only the recent mails ,all the remaining unread mails were not accessible from the java code.......i am attaching my code...
package mail.hmailserver;
import java.io.*;
import java.util.*;
import javax.mail.*;
public class ReadMail_frm_hmailserver {
     int c=0;
@SuppressWarnings("unchecked")
public static void main(String args[]) throws Exception {
ReadMail_frm_hmailserver mailObj=new ReadMail_frm_hmailserver();
mailObj.readMails();
public Vector[] readMails() throws Exception
     String host = "172.29.19.78";
String user = "[email protected]";
String password = "testuser1";
// Get system properties
Properties properties = System.getProperties();
// Get the default Session object.
Session session = Session.getDefaultInstance(properties,null);
// Get a Store object that implements the specified protocol.
Store store = session.getStore("pop3");
//Connect to the current host using the specified username and password.
store.connect(host, user, password);
//Create a Folder object corresponding to the given name.
Folder folder = store.getFolder("inbox");
// Open the Folder.
folder.open(Folder.READ_ONLY);
//folder.open(Folder.READ_WRITE);
Message[] message = folder.getMessages();
// String [] contents=new String[10];
Vector [] contents = new Vector[message.length];//creating array of vectors to store mails
// Vector contents1=new Vector();
System.out.println("No of mails : " + message.length);
System.out.println("subject 1 : "+message[0].getSentDate());
System.out.println("subject 2 : "+message[0].getSubject());
// System.out.println("subject 3 : "+message[2].getSubject());
// System.out.println("subject 4 : "+message[3].getSubject());
//System.out.println("-----------------");
// Display message.
for (int i = 0; i < message.length; i++) {
          c=0;
          contents[i] = new Vector(); //since vector array is an array of arrays we hav to initilize each of the content vectors
System.out.println("------------ Message " + (i + 1) + " ------------");
System.out.println("SentDate : " + message.getSentDate());
System.out.println("From : " + message[i].getFrom()[0]);
System.out.println("Subject : " + message[i].getSubject());
System.out.print("Message : ");
//System.out.println(message[i].getContent());
Multipart multipart = (Multipart) message[i].getContent();
//System.out.println(multipart.getCount());
String line = null;
for (int j = 0; j < multipart.getCount(); j++) {
//System.out.println(i);
//System.out.println(multipart.getContentType());
BodyPart bodyPart = multipart.getBodyPart(j);
InputStream stream = bodyPart.getInputStream();
BufferedReader br = new BufferedReader(new InputStreamReader(stream));
while (br.ready()) {
     try {
                              //line.append(br.readLine());
          //line=line+"\n"+br.readLine();
          line=br.readLine();
          if(line.equals("NOTICE")){
                    System.out.println("entered-----------------------------exit loop");
                    //exit();
                    c++;
                    break;
          if(c==0)
          contents[i].add(line); //adding the mails line by line to the array
                         System.out.println(line);
          //System.out.println(contents[i].get(j));
     } catch (Exception e) {
                              // TODO Auto-generated catch block
                              e.printStackTrace();
                              System.out.println("Exception : "+e);
     //contents[1].add(line);
System.out.println();
//System.out.println(line);
// contents[i].add(line); //adding the mails line by line to the array
System.out.println();
// folder.close(true);
//store.close();
//System.out.println(contents.length);
//System.out.println(contents[0].get(0));
//System.out.println(contents[0].);
return contents;

You might want to use IMAP to read mail from hMail Server, if you keep messages on server. It has a lot more features for managing messages on server.
A lot of POP3 implementations (both client and server side) will automatically delete retrieved messages. I don't know exactly what JavaMail does in that regard, nor of hMailServer, but I do know some mailservers out in the wild will ALWAYS delete mails retrieved with POP3.

How to access my mail from another computer. Both iPads

HHow to access my mail from another computer. Both iPads. Both iCloud.

add the email account to your email software like with any email service, or go to www.iCloud.com

Accept Mail from another server

Similar Messages

Maybe you are looking for