Accept Remote Control Certificate

Greetings,
I'm fine tuning my remote control policy. I don't use encrypted remote sessions. I am trying to make it so that when I remote control a machine in ZCM 10.3 with XP OS it goes past the certificate acceptance automatically.
-OR- the cert accept box doesnt come up at all.
Basically you click on a workstation then click remote control, select the IP , ( I don't use DDNS), and it shows the remote session.
I have already told my remote policy to not use encryption. Yet i still get a cert.
Thanks for any help you can provide.

donasutton,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

Accept Certificate Fingerprints for all remote controlled WS

Frustrating thing is that one has to accept the certificate for each and every remote controlled PC.
One of our hotline guys got a new Harddisk (no roaming Profile) and all started from beginning. So I found a solution: I exported the registry from HKEY_CURRENT_USER\Software\Novell\ZCM\Remote Management\Viewer\Settings\DeviceFingerprints from another PC and imported it for the user on the new PC. OK everything working again without any question "Accept this certificate ...".
So I created a bundle with the following Launch Script Action and assigned it to all of my helpdesk users:
reg export "HKEY_CURRENT_USER\Software\Novell\ZCM\Remote Management\Viewer\Settings\DeviceFingerprints" \\Srv1\Vol1\Dir1\DevFngrPrnt%COMPUTERNAME%.reg
copy /y \\Srv1\Vol1\Dir1\DevFngrPrnt*.reg \\Srv1\Vol1\Dir1\AllDevFngrPrnt.reg
reg import \\Srv1\Vol1\Dir1\AllDevFngrPrnt.reg
So with every launch all Fingerprints get exported and all the other users will import all of them. But still at least one Admin need to permanently accept the certificate.
Of course there are a lot of duplicates since each user exports the same Fingerprints. But the import takes care of it and just leaves one fingerprint for each device.
My QUESTION now: Where can I extract that Fingerprint directly from all the remote machines distribute it to all Hotline users? I did not find the source of it.
Thanks Klaus

BachmannK,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Verizon Remote Control iPhone App will not accept my logon credentials

I downloaded the Verizon Remote Control iPhone App - but it doesn't accept my username/password. The same app has a Support section and that section does accept my username/password.
Any advice?

make sure you are using the Verizon primary email account, if you are still having issues contact the FIOS tech support (FSC) over a live chat at http://www22.verizon.com/content/contactus or call on 1 800 837 4966
“I am a Verizon employee but my comments and thoughts are my own.”

ZCM 11.3 Remote Management Certificate Prompt

Anything new on how to disable the "Unable to verify the identity of workstation as a managed device" certificate prompt? Is this something we just have to live with?

Yes it seems to the help desk staff that everytime they remote control a workstation they have to accept the prompt. Which apparently is annoying enough the the help desk manager is looking at Bomgar.
Apparently Bomgar after a reboot reconnects the session which our guys now ping the workstation so they know when it is back up.
I see that 11.4 beta is going to use tightvnc 2.7. I would like to compare to what we have now. Do you know what 11.2 uses?
Thanks
>>> On 3/26/2015 at 12:26 PM, CRAIGDWILSON<[email protected]> wrote:
kwhite;2351139 Wrote:
> Internal created by ZCM. Do I need an external? if so, it is probably
> not an easy task to convert is it?
>
>
> I don't know where I read it, but I thought I read you won't get
> prompted for the same workstation until after 4 days. If there was a
> way to change that to a year, that might help?
>
>
>
>
> >>> On 3/17/2015 at 4:16 PM,
> CRAIGDWILSON<[email protected]> wrote:
>
>
>
>
> Do you have an Internal (Created by ZCM) or an External CA (eDirectory,
> Active-Directory, VeriSign, etc..)
>
>
> --
> CRAIGDWILSON
> ------------------------------------------------------------------------
> CRAIGDWILSON's Profile: https://forums.novell.com/member.php?userid=5830
> View this thread: https://forums.novell.com/showthread.php?t=482564
Let me check on a few things.
Actually Internals should have less prompting issues, but knowing
Internal vs External is important when I checkout stuff.
CRAIGDWILSON
CRAIGDWILSON's Profile: https://forums.novell.com/member.php?userid=5830
View this thread: https://forums.novell.com/showthread.php?t=482564

PCs freeze when remote controlled

I'm having an issue with certain PCs which freeze whenever I attempt to remote control them from ZCC.
When you accept the certificate, the "Zenworks Remote Management Connection" window appears and stops at "Client Initialization Message Sent", at this point the target PC completely locks-up.
There doesn't seem to be any pattern as to which PCs this affects, and because the PC freezes, there is no entry in the log file or windows event log.
Any help on this one would be greatly appreciated. (ZCM 10.2.2 - Win XP Pro SP2 / 3)
Paul.

For one of the devices with the issue, try going to the configuration
tab of the device being RC'd, Selecting Remote Management, select
override settings, and then deselect the "Enable Optimization Driver".
If that helps, look to see if there is an update for the video driver.
On 3/2/2010 12:16 AM, pzzelenewicz wrote:
>
> I'm having an issue with certain PCs which freeze whenever I attempt to
> remote control them from ZCC.
> When you accept the certificate, the "Zenworks Remote Management
> Connection" window appears and stops at "Client Initialization Message
> Sent", at this point the target PC completely locks-up.
> There doesn't seem to be any pattern as to which PCs this affects, and
> because the PC freezes, there is no entry in the log file or windows
> event log.
>
> Any help on this one would be greatly appreciated. (ZCM 10.2.2 - Win XP
> Pro SP2 / 3)
>
> Paul.
>
>

Lenovo AIO C440 - not working infrared remote control

Hello,
is there any hint how to get infrared remote control working for a new C440 model? Tomorrow I will try to measure and/or replace batteries which could be bad. For now it is totally not working.
Another question: the remote should work only within AverMedia TV app or in the whole Windows 8?
Regards,
Zdenek

hi bohdik,
Welcome to the Lenovo Forums.
The IR Windows Media Center remote control is for use with C440 models with optional TV tuner. If you have this model, make sure the TV Tuner driver and the ITE CIR Driver from the lenovo support site are installed under Device Manager (press Windows Key+R then type devmgmt.msc) then follow the Set up a TV signal in Windows Media Center. guide.
Note:
You must have Windows 8 PRO to enable Windows Media Center
See this articles in reference:
How to add Windows Media Center to Windows 8 Pro
How To Install And Set Up Media Center On Windows 8
Hope this helps
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Remote Control and Remote View Problem

Hi,
I work at a High School running Netware 6.0 SP5 and Zen works 4.01 ir7.
Remote Control and Remote View works great but I noticed one problem.
We have a logo of the school that is forced down on to the desktop when a
user logs in through group policies. This logo works perfect for the
desktop wall paper and loads every time a user logs in.
When I Remote Control or Remote View a computer the users desktop wall
paper turns from the logo being forced down through group policies to the
desktop to a blue desktop wall paper.
I would prefer the desktop wall paper staying the schools logo when I
Remote Control or Remote View because if the desktop wall paper changes to
the blue color I mentioned above when I Remote Control or Remote View the
users computer, they will know that someone is taking over their computer
which sometimes we dont want them knowing.
We have Windows 98SE computer running Novell Client 3.4 and we have some
computers running Windows XP Professional SP1 and Windows XP Professional
SP2 both running Novell Client 4.91 SP2.
The Remote Control and Remote View problem of the desktop wall paper
changing on the users computer occurs on all operating systems mentioned
above.
Is there a solution to my above problem? When Remote Controlling and
Remote Viewing someone's computer I don't want the desktop wall paper to
change.
Thanks!

Bpilon,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

SCCM remote control keeps dropping out when another network adaptor loses connection

Hey guys,
Hopefully someone will be able to help me out
at work, we are running SCCM 2012, and I use SCCM 2012 config manager to manage the clients etc
We have a particularly annoying issue with SCCM remote control; it constantly drops out when a network connection on the client machine disconnects or changes state, even if its not interface I'm remote controlling through
Here's an example for you:
a laptop with a wired, and wireless connection:
I remote control the machine through the wired network address (lets say 192.168.0.1), but if the wireless connection drops out (someone turns it off or it breaks) the remote control client will kick me off, lock the screen, and I have to wait 20-30 seconds
before it will accept my connection again
This happens with any network adaptor that's installed on the client
Here is a copy of the logs re-creating this issue: https://www.dropbox.com/s/nu4w28d44xky3rg/CmRcService.log
(I've edited it to take out usernames and IP addresses as they are publicly accessible)
So my question, does any one know how to fix this issue? I see it uses WMI, is there anyway to get WMI to ignore an interface?
Thanks heaps,
Harry

This is going to be done by design for security reasons. If the network connect for whatever reason is down the pc will automatically be locked.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Remote control and MegaSky 580 (MS5580)

Hi,
i have the device with driver version AP v1.5.0.1 and latest patch for presto installed. watching tv works on one computer (1) but the remote control does not react.
On another older computer i tested(2), its the other way round. the remote control works, i can start the presto software with the red button, but then it crashes and presto can not start scanning because it can not find the device. strange, the ir-remote works but device not fount, he? anyway, this is not my pc, and i dont want do run the megasky on this one, but i just testet to see if the device is defective.
so, i asked at the msi support, but they said i have to ask the dealer. the dealer did not give any information but excanged the device for a new one. now i have the new device and meanwhile a new pc (3), but there is no difference: tv works but ir does not.
on pc (2) the new device and remote work but tv does not.
now i suspect there is a software fault.
so, asking the dealer for a 3rd device seems to make no sense.
what can i do before i buy another brand?
here the configurations i tested the mega sky with:
(1)
AsRock Mainboard 775VM800
Via P4M800 Chipset
Intel Celeron D 2,93GHz
ATI 9600Pro graphics
512MB DDR 333MHz
Windows XP SP2
logitech UltraX Optical Mouse (usb)
logitech Internet Pro Keyboard (usb)
(2)
some older board from msi?
Pentium 4 2,? GHz
geforce 4ti graphics
256MB ram
Windows XP SP2
unknown logitech mouse (usb)
noname keyboard (ps2)
(3)
AsRock Mainboard ALiveNF6G-DVI
NVidia NF-6100-430 Chipset
Athlon 64 X2 3800+
Onboard Geforce 6100 graphics
1024MB DDR2 800 ADATA ram
Windows XP SP2
logitech UltraX Optical Mouse (usb)
logitech Internet Pro Keyboard (usb)

i have done some more investigation with the remote control.
now i'm pretty sure, the sender/receiver work on any of the 3 pcs, but the drivers are not propperly setup or buggy on two of them. here are the things i have done:
in the presto software folder there is a \Driver\KbFilterDriver subfolder with REMOVE.exe in it. i ran it and after re-plugging in the device, there was a yellow exclamination mark at the dtv-receiver under human interface devices. it says the driver could not be loaded. now there was a button for using the "installed driver", that i used to install a microsoft standard hid keyboard driver. i was a little confused, but windows accepted this.
now i can open a notepad window, and every single key ot the remote control results in a character typed into notepad.
after pressing the buttons on the remote row by row, there are: o1abcdefgx2ijk
so what the hell is wrong with the GenesysLogic KbFilterDriver? i want to sit back and watch tv with the remote control in my hand! is that too much demanded? why does not the manufacturer respond on this problem? its obvioulsly their fault.

Remote control and importing with 65sp1

I have two problems:
1. when I try to import a workstation it comes in as the default which is
computer name and MAC address. even though I have the policy setup as
container name and computer name?
2. when I remote control to workstations I get the 1487 your are
attempting... message I know there is a discussion that said it was fixed
in sp1, but that does not seem to be the case.
I am running 6.5 sp1 for server OS and 6.5sp1 for zenworks. workstations
are 2k and xp running current clients for both.

nobody,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Hp Digital photo frame df1010v1 remote control

Remote has a new battery in it and will not work.
can anyone help with how to?
HP support is not supportive of these products...
Thanks

Hi mushroom50,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I see that your remote control is not working, even though you have replaced the batteries, and I would be happy to assist you!
In regards to obtaining replacement parts, please examine the support number for your region provided on the Product Support guide on page 1.
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Odd Remote control behavior

I have remote control enabled through a workstation policy associated to the Workstation container. I do not have an active user policy with remote control enabled or associated to any users.
But, It seems we can remote control into a workstation through a user's name in Console One and it overides any restrictions we had put on the policy withing the workstation policy. We are able to remote right into a user with no prompt. If we remote control into a workstation it prompts like it should.
Im kinda confused here.

Bob,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Why doesn't my remote control work?

My remote controls for both my Portable and desktop stopped working. Has the software changed?

Could you please post complete product/model number of your Notebook? You can use link below to find this info
http://h10025.www1.hp.com/ewfrf/wc/document?tmp_renderType=findModel&cc=us&dlc=&docname=c00033108&lc...
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!

Remotely Control Windows 7 Home Premium

Hey,
So this is my problem: I've got two computers at home. One's a Mac and the other is a Wndows 7 Home Premium machine.
I have Lion Server coupled with ARD 3 and need to remotely control the Windows computer. I have installed VNC 4 (on Windows) but don't know what to do next.
I understand there is a bunch of restrictions within Windows 7 Home Premium when it comes to remote connections but it's something I really need to sort out.
Do you know how to set up ARD with Windows VNC (or any other paths to remote control)?
Any help will be greatly appreciated.
Cameron

Hey,
So on the Windows PC the "Allow Remote Assistance connections to this computer" checkbox is marked.
And on the Mac the error message reads:
"The Mac cannot connect to the Windows based computer.
This problem can occur if:
• The Windows-based computer is not set up to accept remote connections.
• The Windows-based computer is not turned on.
• The Mac, or the Windows-based computer is experiencing network problems.
Try connecting to the Windows-based computer again, or contact your administrator."
Thanks for being so helpful!
Cameron

SQL Server Express 2008 no longer accepting remote connections

Last night our SQL Server Express 2008 (running on Windows 2003 server) stopped accepting remote connections.
1. We restarted the SQL Server -- no resolution.
2. We rebooted the host Windows 2003 server - no resolution.
3. telnet localhost 1433: says Could not open connection to the host on port 1433... connection failed.
4. netstat -an indicates that the server is not listening on port 1433
5. SQL Server Network Configuration -> Protocols for SQLEXPRESS2008A -> (properties) -> TCP-IP (enabled), Listen All (yes)
6. SQL Native Client 10.0 Configuration -> Client Protocols -> (properties) TCP-IP (enabled), Default port (1433)
Fragment from the server error log:
2014-03-26 08:50:41.09 Server      A self-generated certificate was successfully loaded for encryption.
2014-03-26 08:50:41.11 Server      Server is listening on [ 'any' <ipv4> 1026].
2014-03-26 08:50:41.11 Server      Server local connection provider is ready to accept connection on [ \\.\pipe\SQLLocal\SQLEXPRESS2008A ].
2014-03-26 08:50:41.11 Server      Server named pipe provider is ready to accept connection on [ \\.\pipe\MSSQL$SQLEXPRESS2008A\sql\query ].
2014-03-26 08:50:41.11 Server      Dedicated administrator connection support was not started because it is disabled on this edition of SQL Server. If you want to use a dedicated administrator connection, restart SQL Server using the
trace flag 7806. This is an informational message only. No user action is required.
2014-03-26 08:50:41.11 Server      The SQL Server Network Interface library could not register the Service Principal Name (SPN) for the SQL Server service. Error: 0x54b, state: 3. Failure to register an SPN may cause integrated authentication
to fall back to NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies.
2014-03-26 08:50:41.11 Server      SQL Server is now ready for client connections. This is an informational message; no user action is required.
2014-03-26 08:50:41.29 spid10s     Clearing tempdb database.
2014-03-26 08:50:41.89 spid10s     Starting up database 'tempdb'.
2014-03-26 08:50:42.09 spid13s     The Service Broker protocol transport is disabled or not configured.
2014-03-26 08:50:42.09 spid13s     The Database Mirroring protocol transport is disabled or not configured.
2014-03-26 08:50:42.14 spid13s     Service Broker manager has started.
2014-03-26 08:50:42.14 spid7s      Recovery is complete. This is an informational message only. No user action is required.
2014-03-26 08:50:53.48 spid51      Attempting to load library 'xpstar.dll' into memory. This is an informational message only. No user action is required.
2014-03-26 08:50:53.48 spid51      Using 'xpstar.dll' version '2007.100.1600' to execute extended stored procedure 'xp_enumerrorlogs'. This is an informational message only; no user action is required.
2014-03-26 08:51:35.68 spid54      Starting up database 'Web TimeSheet2'.
2014-03-26 08:51:38.47 spid54      Recovery is writing a checkpoint in database 'Web TimeSheet2' (6). This is an informational message only. No user action is required.
Note: the lines referring to xpstar.dll is new after this porblem. Previous logs do not have this,Any help will be appreciated.

Hi,
>>Server is listening on [ 'any' <ipv4> 1026].
Your sql server is not listening on default port 1433 but on 1026.When you connect to instance like hostname\instancename you should specify post no also.
like hostname\instancename ,1026
Can you try this.Makes sure TCP/IP and named pipes protocol is enabled
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Accept Remote Control Certificate

Similar Messages

Maybe you are looking for