Acceptable resolution to use for uploading to prevent piracy

When I uploaded my images to my website I discovered they can be pulled off to the desktop by ANYONE at a size larger than one meg! What size must I use to upload them with iphoto so that this is not possible, yet they are still reasonably visible? I have pulled the website down until I can resolve this issue. As a professional photographer I find this unacceptable. Any help anyone can give me would be greatly appreciated. Thanks

You can record direct to youtube from your web cam.
Navigate to Youtube.com then click Upload, you will hopefully see the link "Webcam Capture"

Similar Messages

What is the method used for upload of data

Hi All,
What is the method used for upload of Data from excel spread sheets to SAP HR.
it is Bulk Data from many countries.LSMW or BDC Session Method?
what are country specific infotypes used for PA and OM.
can u plz give the list of country specific infotypes used for PA n OM Module.
Thanks
Archana

Hi Archana,
To Upload bulk data I think BDC is the best and effecient way.
Regarding Infotypes we dont have any country specific Infotypes in OM & PA. In Payroll we do have according to country wise.
I hope you had understood the point
Regards
Pavani
Remainder: Points to be given on answers

What is the best filetype and resolution to use for flash, using a 1920x1080 stage.

Hi all,
Hope this isn't a dumb question, but what is the best file type and resolution to use for a Flash stage setup of 1920x1080 and 1024x768?
Lately my images have been looking pixelated. There OK when I test the movie in Flash, and the SWF looks OK, but the HTML looks really pixelated.
Many thanks to all.
JR

is your page scaling (ie, 100% x 100%)?
if not, there should not be any problem.
if yes, then you usually want your bitmaps to be as large as the largest screen you want to use and NOT have them appear pixelated.
or, use vector graphics so they size without pixelation.

What image resolution should use for the new iPad with Retina display?

What image resolution should use for the new iPad with Retina display?

http://www.ipadcasereview.com/ipad-3-cases-and-covers-top-of-page/#sthash.hZKnxH ku.dpbs
these are the best

What format and size must I use for uploading photos in Creative Cloud?

I don't know what format (TIF, JPG etc.) and size to use for uploading photos into the cloud.

Hi John,
There are no restrictions on the file types you can store in Creative Cloud. However, you’ll be unable to share some file types, such as audio, video, fonts, executable, and application extensions. Sharing of these files is restricted for copyright and security reasons.
Details here : http://helpx.adobe.com/creative-cloud/kb/cannot-share-certain-types-files.html
Thanks,
Manish Sharma

ECATT Use for upload master data

Hi
Please Guide me how to use ECATT , when we Upload the Master data in SAP Best Practice ,not in SAP R/3 ( note : for SAP Best Practice system only) through ECATT.
Can anybody have any idea about this
Guide me
Regards
Roobal

ECATT can be used by using transaction code SECATT.
This tool is used for data uploading and regression testing.
You need to prepare a scenario for regression testing.
You should create
1. Test Script
2. Test Data
3. Test Configuration.
If you want to upload master data, LSMW is the best tool.
http://www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc
Regards,
Ravi
Edited by: Ravi Sankar Venna on Apr 22, 2009 12:54 PM

My preferences allow pop-ups and yet when I try to generate a letterfrom an online database I'm using for work, FifreFox "prevents po-ups from this site" Why?

I need to access an online database to generate letters for an assigned project. I click on the appropriate link to generate letters, the file is conveyed to my downloads, and I open it using Adobe to create a pdf. This worked fine for the first 5 letters. When I tried to generate the 6th, a yellow banner appeared informing me that "FireFox prevented this site from opening a pop-up window" which prevented me from getting the letter into downloads to open in Adobe. Even though I don't have the pop-up blocker on, I clicked on preferences and found the site in question already listed as allowed. Why is this happening? How can I continue my work?

* Go to your concerned website
* Right-click empty space within the page and click '''View Page Info'''
* In the '''Page Info''' window, select the '''Permissions''' panel
* Under '''Load Images''' , '''Open Pop-up windows''', '''Set Cookies''' -> place/Remove Checkmark from '''Use Default''' and change the setting to '''Allow'''
* Close the Page Info window
Check and tell if its working.

Prime Infrastructure 2.0 is not accepting ubf patch file for upload

Hi,
After successfully installing Prime Infrastructure 2.0 on a single server via OVA file in ESX, i tried to install all the latest patches.
- pi_update_2.0-3.zip was installed successful
But for the patch "pi_dev_pack_update_2.0-10.ubf" i was not be able to do the file-upload via the Web-GUI.
Is there anyone who knows how to put this file on the Prime server and how to install this patch via CLI ?
Cisco Application Deployment Engine OS Release: 2.0
ADE-OS Build Version: 2.0.6.003-px-build
ADE-OS System Architecture: x86_64
Copyright (c) 2005-2010 by Cisco Systems, Inc.
All rights reserved.
Hostname: xxxxxxx
Version information of installed applications
Cisco Prime Infrastructure
Version : 2.0.0.0.294
Kind regards,
Danjan Mudde.

Hi Danjan,
****These patches cannot be applied via cli and can only be applied from GUI of Prime*****
Go to the link below and download the "pi_dev_pack_update_2.0-10.ubf"
http://software.cisco.com/download/release.html?mdfid=284422771&flowid=45323&softwareid=28
4272933&release=2.0.10&relind=AVAILABLE&rellifecycle=&reltype=all
After downloading the file, go to "Administration > Software Update", click upload
update file, browse to the file location that you've downloaded.
Once the file has beenuploaded, you can select the update and click install.
After installing, it shouldindicate "Pending Restart" = Yes. You will likely need to
go to the cli and do an "ncs stop" and then "ncs start".
Hope it will help
Thanks-
Afroz
[Do rate the useful post]

MBA 11 inch which resolution to use for presentations

I formerly used my MacBook Pro for Keynote presentations and set the display for 1280 x 800. I now want to use my MBA 11 In but that resolution is unavailable and I cannot seem to find the proper resolution. Any advice

You should use the latest version of Smart View 11.1.2.5.400 (I believe is the latest patch). I will say using it against 11.1.1.3 will not be the greatest experience. You really should be on 11.1.2.2 (ok, 11.1.2.1.103) or higher of both Essbase and APS to take advantage of all that smart view has to offer.

[N95] What resolution to use for contact-tumbnails...

Can some1 tell me how big the pic should be for my contact-tumbnails?
(resolution)
Thanks...
"Wham, Bamm, thank you Man!!"

you can put in any resolution and it will resize it

Problem using File upload in portlets

hello there
I'm trying to use file upload component in one of my portlets. I searched a lot about a working component to be used in portlets since the standard one that comes with JSC doesn't work in portlets. I managed to get commons file upload and tomahawk to run in my portlet, but when I choose a file and try to get selected file's details it throughs a NullPointerException reporting that the file object is null.
so please can anyone guide me to a working portlet example, I tried to find one but I couldn't. if that's hard to find, what should I do ?
thank you in advance

I added file upload component in JSF from portlets in Sun Java Portal server.
Take a look...
portlet.xml
<?xml version="1.0" encoding="UTF-8"?>
<portlet-app xmlns="http://java.sun.com/xml/ns/portlet/portlet-app_1_0.xsd"
version="1.0"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/portlet/portlet-app_1_0.xsd http://java.sun.com/xml/ns/portlet/portlet-app_1_0.xsd">
<portlet>
<description>SFTB Anonymous Mail Portlet</description>
<portlet-name>SFTBAnonymousMailPortlet</portlet-name>
<display-name>SFTBAnonymousMailPortlet</display-name>
<portlet-class>org.apache.portals.bridges.portletfilter.FilterPortlet</portlet-class>
<init-param>
<name>portlet-class</name>
<value>com.sun.faces.portlet.FacesPortlet</value>
</init-param>

<init-param>
<name>portlet-filters</name>
<value>jp.sf.pal.tomahawk.filter.ExtensionsPortletFilter</value>
</init-param>
<init-param>
<description>Portlet init page</description>
<name>com.sun.faces.portlet.INIT_VIEW</name>
<value>/jsp/index.jsp</value>
</init-param>
<supports>
<mime-type>text/html</mime-type>
<portlet-mode>VIEW</portlet-mode>
<portlet-mode>EDIT</portlet-mode>
<portlet-mode>HELP</portlet-mode>
</supports>
<portlet-info>
<title>Отправка предложений</title>
<short-title>Отправка предложений</short-title>
</portlet-info>
</portlet>
</portlet-app>
web.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<display-name>SFTBAnonymousMailComment</display-name>
<context-param>
<param-name>javax.faces.STATE_SAVING_METHOD</param-name>
<param-value>server</param-value>
</context-param>
<context-param>
<param-name>javax.faces.CONFIG_FILES</param-name>
<param-value>/WEB-INF/faces-config.xml</param-value>
</context-param>

<filter>
<filter-name>ExtensionsFilter</filter-name>
<filter-class>org.apache.myfaces.webapp.filter.ExtensionsFilter</filter-class>
<init-param>
<param-name>uploadMaxFileSize</param-name>
<param-value>10m</param-value>
<description>Set the size limit for uploaded files.
Format: 10 - 10 bytes
10k - 10 KB
10m - 10 MB
1g - 1 GB
</description>
</init-param>
<init-param>
<param-name>uploadThresholdSize</param-name>
<param-value>100k</param-value>
<description>Set the threshold size - files
below this limit are stored in memory, files above
this limit are stored on disk.
Format: 10 - 10 bytes
10k - 10 KB
10m - 10 MB
1g - 1 GB
</description>
</init-param>
</filter>
<filter-mapping>
<filter-name>ExtensionsFilter</filter-name>
<servlet-name>FacesServlet</servlet-name>
</filter-mapping>
<servlet>
<servlet-name>FacesServlet</servlet-name>
<servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>FacesServlet</servlet-name>
<url-pattern>*.faces</url-pattern>
</servlet-mapping>
</web-app>
Files in WEB-INF/lib
commons-beanutils-1.7.0.jar
commons-collections-3.2.jar
commons-digester-1.8.jar
commons-fileupload-1.2.1.jar
commons-io-1.2.jar
commons-logging-1.1.1.jar
faces-response-filter-0.2.jar
jsf-api-1.1_02.jar
jsf-impl-1.1_02.jar
jsf-portlet-1.1.5.jar
jstl-1.1.0-D13.jar
log4j-1.2.9.jar
portals-bridges-portletfilter-1.0.jar
standard-1.1.0-D13.jar
tomahawk-1.1.6.jar
tomahawk-bridge-0.9.1.jar
Files tomahawk-bridge-0.9.1.jar, faces-response-filter-0.2.jar may be found there http://sourceforge.jp/projects/pal/
In JSF beans I'm using org.apache.myfaces.custom.fileupload.UploadedFile
Hope this helps.
Bests,
Alex Magdenko

Scheduling Problem for uploading Data from Flat file to SAP

Hi guys,
I am facing a weared problem in uploading some leave records in z table. The code is working fine if we run it through se38 after selecting the file from a shared location from production server which has all the access rights.
This folder lies in the \usr folder of SAP Production.
I have kept all the Flat files in the shared path "
Tis-mum-iz-s1\migration\SAP-INT\leave\" ...
To give u exact directory structure..
Tis-mum-iz-s1 is the Server Name
usr is the SAP System folder used for uploads and downloads
usr |
...-> Migration |
                  -> SAP-INT |
                             -> leave -> (Flat Files)
Migration folder is shared with all rights.
Obviously, we cannot give shared drive as the variant in the scheduler.
So i use the system path i.e. \usr\sap\tmp\migration\sap-int\leave\ as the variant.
All my other download programs are working fine with this path as a variant...
But my this particular upload program does not work with this path....
I am giving u my code...
TATA INTERACTIVE SYSTEMS (A Division of TATA INDUSTRIES LIMITED)
REPORT      : ZMIGRATE_ZLEAVE
DESCRIPTION : To Upload the Leave data. (ZLEAVE)
CREATED BY : Abhishek Bachhawat
CREATED ON : 01.09.2005
CONSULTANT : ANAND
REPORT ZMIGRATE_ZLEAVE.
TABLES: ZLEAVE.
data: begin of wtab,
          MANDT(3),
          ZLVID(8),
          PERNR(8),
          ZSTDT(8),
          ZENDT(8),
          ZDAYS(4),
          AEDAT(8),
          ERDAT(8),
      end of wtab,
      itab like WTAB occurs 0 WITH HEADER LINE.
data: temp like zleave occurs 0 WITH HEADER LINE.
SELECTION-SCREEN BEGIN OF BLOCK file
               WITH FRAME TITLE text-005.
parameters: file like rlgrap-filename Obligatory.
Concatenate File SY-DATUM '_Leave.txt' into File.
SELECTION-SCREEN END OF BLOCK file.
at SELECTION-SCREEN ON VALUE-REQUEST FOR file .
CALL FUNCTION 'WS_FILENAME_GET'
    IMPORTING
      FILENAME = file.
IF SY-SUBRC <> 0.
ENDIF.
start-of-selection.
if file ne space.
    CALL FUNCTION 'WS_UPLOAD'
      EXPORTING
        FILENAME = FILE
        FILETYPE = 'DAT'
      TABLES
        DATA_TAB = ITAB.
else.
    message e000(zps) with 'Specify a file'.
endif.
SORT ITAB BY ZLVID.
LOOP AT ITAB.
    REFRESH TEMP.
    CLEAR TEMP.
    TEMP-MANDT = sy-mandt.
    TEMP-ERDAT = SY-DATUM.
    TEMP-ZLVID = ITAB-ZLVID.
    TEMP-PERNR = ITAB-PERNR.
    TEMP-ZSTDT = ITAB-ZSTDT.
    TEMP-ZENDT = ITAB-ZENDT.
    TEMP-ZDAYS = ITAB-ZDAYS.
    TEMP-AEDAT = ITAB-AEDAT.
    TEMP-ERDAT = ITAB-ERDAT.
    APPEND TEMP.
    SELECT SINGLE *
           FROM   ZLEAVE
           WHERE ZLVID = TEMP-ZLVID
           AND    PERNR = TEMP-PERNR.
    IF SY-SUBRC = 0.
      UPDATE ZLEAVE SET ZSTDT = TEMP-ZSTDT
                        ZENDT = TEMP-ZENDT
                        ZDAYS = TEMP-ZDAYS
                        AEDAT = TEMP-AEDAT
                        ERDAT = TEMP-ERDAT
             WHERE ZLVID = TEMP-ZLVID
             AND   PERNR = TEMP-PERNR.
    ELSE.
      INSERT ZLEAVE FROM TABLE TEMP.
      COMMIT WORK.
    ENDIF.
ENDLOOP.

Hi,
open dataset file for input in text mode.
check sy-subrc = 0.
while sy-subrc = 0.
read dataset file into wa.
if sy-subrc = 0.
append wa to itab.
else.
    exit.
endif.
endwhile.
close dataset file.
regards
Siggi
PS: check also the F1-help for open, read and close statements!

Which one is better for uploading data LSMW or ECATT ?

I am going to implement my product in customer place.which tool I can use for uploading data.ECATT or LSMW whch one is better to upload master data and transaction data ,which one is user friendly?kindly guide me on this.

Hello TJK,
LSMW and eCATT has different functionalitites and different advantages, but common thing is they are used for data upload.
eCATT is mainly used as a testing tool for follow-on transactions i.e. Purchase Requisition, Purchase order, Goods Receipt etc.
Where as LSMW is used for Master data (Materials, Customer, Vendor, BOM, Inforecord etc) and some of the transactions data (Purchase order, purchase requisition)
There are many standard objects are available in LSMW so most of the consultants use LSMW, but again depends on the requirement.
This will help to understand the basics of eCATT.
/people/sumeet.kaul/blog/2005/07/26/ecatt-an-introduction
and here it is for LSMW
/people/hema.rao/blog/2006/09/14/lsmw--step-by-step
Hope this will help.
Regards
Arif Mansuri

What file size is used for "optimized" upload/download?

When I upload my photo files from Aperture (and previously from iPhoto) I routinely use the upload setting named "dowloading of optimized" files. I know that this downsizes the files for faster upload/download, but still gives a file size acceptable for great onscreen presentation and for a resulting small print of someone downloads. Can anyone tell what downsizing Aperture/iPhoto does in this case? For example, 50% jpeg, email sized jpeg, etc. Since Apple will kill the MobileMe galleries in June I have to switch to another photo presentation host. For upload to such a host Aperture/iPhoto gives choices like 100% jpeg, 50% jpeg, etc. What I want to do is end up with something similar to what I now get with the "optimized" setting. Thank you.

You will note that I referenced both programs (iPhoto & Aperture) in my original message above, and I have posted in both forums. Since both programs offer the same (at least on the surface) option of "optimized" to MobileMe galleries, one might assume that both use the same or a similar system. Lengthly testing of my own is the "best" solution only if I can not find anyone who is knowledgeable about what these programs do in the upload. It has been my sincere joy over many many years that I often find people on these forums who possess knowledge much greater than I. As to the programs changing the algorithum at any time, I doubt that since this MobileMe function will disappear in June. Seems like a strange time to make changes.

What file size is used for when uploading to MobileMe from Aperture?

When I upload my photo files from Aperture (and previously from iPhoto) I routinely use the upload setting named "dowloading of optimized" files. I know that this downsizes the files for faster upload/download, but still gives a file size acceptable for great onscreen presentation and for a resulting small print of someone downloads. Can anyone tell what downsizing Aperture does in this case? For example, 50% jpeg, email sized jpeg, etc. Since Apple will kill the MobileMe galleries in June I have to switch to another photo presentation host. For upload to such a host Aperture gives choices like 100% jpeg, 50% jpeg, etc. What I want to do is end up with something similar to what I now get with the "optimized" setting. Thank you.

You will note that I referenced both programs (iPhoto & Aperture) in my original message above, and I have posted in both forums. Since both programs offer the same (at least on the surface) option of "optimized" to MobileMe galleries, one might assume that both use the same or a similar system. Lengthly testing of my own is the "best" solution only if I can not find anyone who is knowledgeable about what these programs do in the upload. It has been my sincere joy over many many years that I often find people on these forums who possess knowledge much greater than I. As to the programs changing the algorithum at any time, I doubt that since this MobileMe function will disappear in June. Seems like a strange time to make changes.

Acceptable resolution to use for uploading to prevent piracy

Similar Messages

Maybe you are looking for