Acceptance at origin checkbox in PO

Hi All
My point of concern is there comes a tab in PO at Item Detail level in Delivery tab "Acceptance at Origin"..
I want to make it compulsory but the point is i am not able to find it in spro.
The path i am refering is spro>>MM>>Purchasing>>purchase Order>>Define Screen Layout at document level>> GR/IR tab...
Pls suggest
Thanks in advance

Hi,
You have not checked properly.Acceptance At Origin is there in GR/IR Control segmenet in the 2nd page.Just go to standard tollbar and (click 6th icon from left side)go to 2nd page and make Acceptance At Origin is required entry.
Regards,
Biju K

Similar Messages

  • Accepted at Origin - process

    Question from MM Colleage:
    Have you used the 107 and 109 movement types before? My understanding is that the accept at origin box is checked at the line item level on the delivery tab of the PO to leverage these 2 movement types. An inbound delivery is completed VL31N. Does VL32N when you post the GR create the 107 movement? Iu2019m disconnecting what t-codes use 107 and 109.  Will VL32N create 107?

    Response from Remo Fabietti:
    I have used these in the past. Yes, you need to set the origin box on the line item. You are not required to use inbound deliveries for this movement (optional). The first movement will receive it into gr blocked stock which in principle allows you to post the invoice, see the inventory, but it is not valuated until you perform the 2nd receipt with which to formally receive into inventory and as valuated inventory. You use MIGO for this. I have attached several knowledge document about this function for your reference.

  • Display Acceptance at origin in Purchase Order

    Hello Experts,
    I am into SAP ECC 6.0 system.
    There is a requirement from our client to use Acceptance at origin process. I have understood the process from various threads which are available on sdn.
    When I am checking my Purchase Order this field is not at all displayed in any of the tab in item details.
    Can you please help me if there is some config required to make this field appear in Purchase Order Item details?
    I am using t code ME21n.
    Thanks in advance for all your help.
    Navin

    Hi
    Acceptance at origin option will come in PO at Item Detail level in Delivery Tab (jst adjacent to Underdel. Tol. option).
    If it is not coming then i guess u need to activate it in 'EKPO' table, the field is 'WEORA'.
    And u can configure it as per ur requirement via SPRO>>MM>>Purchasing>>PO>>Define Screen Layout at document Level (Choose the appropriate Field Sel.) go to GR/IR Control then on the 2nd page u will find this option.
    Thanks

  • Acceptance at origin-mvt types-107 and 109

    Hi experts,
    In which scenario we should use movement types 107 and 109.
    what is acceptance at origin.
    we need to do any configuration for this purpose.
    advance thanks fro help.
    regards,
    dayanand

    Check out OSS note. 1098232 - "Acceptance at Origin: Setup, Integration and Usage".
    You need ECC6.0., SRM and EA-PS activated. I'm not an expert at this subject; just came accross this information studying the differences between mySAP 2004 and ECC6.0.
    Regards,
    Bart

  • Acceptance at origin for subcontracting scenario

    Dear Experts,
    Business needs to use the acceptance at origin functionality with subcontracting orders.
    For this, we need to first set up the field "Origin Accept." in Delivery Tab of PO.
    But, as soon as I enter Item category L in ME21N, the field Origin Accept.  disapperas!
    What config is controlling this?
    Can some one please help?
    regards,
    Shashidhar

    Hi
    Acceptance at origin option will come in PO at Item Detail level in Delivery Tab (jst adjacent to Underdel. Tol. option).
    If it is not coming then i guess u need to activate it in 'EKPO' table, the field is 'WEORA'.
    And u can configure it as per ur requirement via SPRO>>MM>>Purchasing>>PO>>Define Screen Layout at document Level (Choose the appropriate Field Sel.) go to GR/IR Control then on the 2nd page u will find this option.
    Thanks

  • Acceptance At Origin - Need config details in SAP

    Hello Experts ,
    I would like to know the complete details of  Acceptance At Origin  conpect in SAP materials management . Like what are all the config requiremnets required and what integration if has with other modules ..
    Please some  one help me .
    Thank you ...

    Acceptance At Origin
    Specifies whether the acceptance of the ordered goods is to take place at the point of origin (that is, on the vendor's premises).
    If the indicator Origin acceptance in Purchase order item detail in delivery tab has been set, you must post the goods receipt to valuated GR blocked stock using the movement type 107 as soon as the goods have been accepted at the vendor's facility.
    In a second step, you can post the goods from valuated GR blocked stock to unrestricted-use stock using movement type 109 as soon as the goods have been delivered by the vendor.
    You cannot change the indicator in the PO item once you have posted a follow-on document (goods receipt, invoice receipt) for the PO item.
    Check in http://help.sap.com for more information.

  • Accept At Origin and QM Certificates

    We are on ECC 6.0 and use the Accept at Origin function along with QM to check for the receipt of certificates function.  Goods receipt movement 107 indicates we have taken title to the material and goods receipt movement 109 indicates the material has arrived on site.  We only want the QM certificate function to be invoked with the 109 movement.  I can deactivate QM for movement 107 but it still asks if the certificate was received but does not create the inspection lot.  We need for it not to ask if the certificate was even received.
    Any suggestions?

    hi steve
    since you have activated QM in procurement and specifed the certificate key as certificate check it will ask for certificate eventhough you have receiving material with different movement type.you can deselect the cert check required in customization ,but this will lead to "no checking for all movement type
    regards
    thyagarajan

  • I cannot find "Acceptance At Origin" in PO

    I have searched previous post as well , but there is no clear answer about this.
    Some said you could find this in Line Item Delivery tab, but actually I cannot find it.

    Vincent Zhao wrote:
    I have searched previous post as well , but there is no clear answer about this.
    >
    > Some said you could find this in Line Item Delivery tab, but actually I cannot find it.
    Hi Vincent,
    In Delivery Tab of Item Detail, you will see in the extreme left two fields, Over Devivery Tol & Under Delivery Tol There is a Check Box just next to Under Delivery Field by name Origin Accept, which is the one you are searching.
    There are two check boxes, Unlimited & Origin Accept
    Pls revert if not found
    Regards
    Shiva

  • Reset ipad, now won't accept my original passcode

    ITunes wasn't working so reset iPad, now won't accept my passcode. Is there a default I need to use? 

    If You Are Locked Out Or Have Forgotten Your Passcode
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
    If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup.
    If you can not restore your device then you will need to go to recovery mode.
    Placing your device into recovery mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
         1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
             of the cable connected to your computer's USB port.
         2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
             red slider appears, then slide the slider. Wait for the device to turn off.
              If you cannot turn off the device using the slider, press and hold the Sleep/Wake
              and Home buttons at the same time. When the device turns off, release the Sleep/Wake
              and Home buttons.
         3. While pressing and holding the Home button, reconnect the USB cable to the device.
             The device should turn on. Note: If you see the screen pictured below, let the device
             charge for at least ten minutes to ensure that the battery has some charge, and then
             start with step 2 again.
         4. Continue holding the Home button until you see the "Connect to iTunes" screen.
             When this screen appears you can release the Home button.
         5. If necessary, open iTunes. You should see the following "recovery mode" alert:
         6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • When I try to activate my iMessage with the new iOS 7, it will not accept my original Apple ID. Also, when I try to use snapchat, it keeps popping up "login to iTunes to allow push notifications." please help!" I'm really frustrated

    Please help!!!

    I got this under XP before. I was totally baffled until I realized there was a network drive mapped to the same place XP was trying to mount my iPod. The common symptom is that you'll get this sort of "corrupt" error on one machine but it works ok on a friend's machine. If that's true for you, you can change the network drive mapping to another drive letter (easiest) or mount your iPod and change its drive letter in the disk management control panel (under admin tools).
    Hope that helps... this one just about had me pulling my hair out until I recognized the problem.

  • Origin Acceptance on PO (EKPO-WEORA)

    Hi Experts,
    We are looking into a new business process where we take ownership of certian products at the vendor's dock. We are thinking of using the Origin Acceptance field on POs. I looked at this functionality and it seems like the field can be found in the MARA and EKPO tables.
    We cannot let the users change POs and check the field on the PO so we are looking for a way if this field can be copied from the purchasing inforecord or a purchase requisition.
    Since a product can be  shipped from different vendors so setting this flag at the material level will not work for our process. Is there a way this field can be copied to the purchasing inforecord or the purchase requisition using a BAPI or a user exit?
    Your suggestions are greatly appreciated
    Thanks
    Imran

    I tried searching for the field in PIR and Contract so far haven't seen it in the screen layouts.
    Here's the nearest OSS note Ive seen. It indicates a program modification.
    Note 1475163 - "Acceptance At Origin" not available in scheduling agreement
    You may also want to check with SAP Support to find out if they have an upcoming release / patch to cover the WEORA field in PIR and contracts.
    Furthermore, note below indicates some restrictions if you intend to activate origin acceptance field.
    Note 1110140 - Valuated goods receipt blocked stock: Restrictions (FAQ)

  • Netzero says I can't sign in to get my email because my browser (firefox) isn't accepting cookies

    Using Firefox I get to my home page (my netzero). Last Thursday when I tried to got to my webmail.netzero all I'm getting is a blank page that says loading but it never finishes loading. Prior to Thursday I had no problem. If I use IE instead of Firefox it goes to my email without a problem. I'm not getting any error message. Also got an email from firefox support. One of the items is enable cookies step 4 Expand the Cookies section??? Step 5 Check enable cookies and Accept cookies normally checkboxes. These two steps don't appear in the Privacy tab. I have Windows XP.

    In your "More system details" you mentioned turning off Java, if you meant JavaScript you may need to turn it on so you can see your email, many sites require JavaScript. Only a few sites need a Java plug-in to perform complicated animations.
    * Tools > Options > Content > (x) Enable JavaScript
    If you have "Adblock Plus" try disabling, if active, or activating if disabled.
    Status is changed at the "ABP" button on the toolbar. If disabling fixes problem, then you need to identify the filter line causing the problem and disable it.
    If you are getting constant busy indicators replacing the favicons on the tabs, or location bar, it may be similar to a problem with Hotmail affecting Firefox and Chrome users. [/questions/905048]
    Looks like you asked question again, after getting an email. Perhaps the email asked for more information which should have been provided with the original question. [https://support.mozilla.com/en-US/search?q=&num_voted=0&num_votes=&asked_by=FredHein&q_tags=&created=0&created_date=&updated=2&updated_date=&sortby=1&a=1&w=2 questions], specifically [/questions/904854]

  • Triggers in checkbox apex

    Hello all,
    I'm having a problem that i believe is a basic apex question and I need some help with it:
    I have a table where I have a column "acceptance". I need to create a report or a tubular form with to check boxes to manipulate this column "acceptance" :
    "Accepted" check box and
    "Rejected" Check box.
    In this grid the user will be allowed to accept or reject the row clicking in one of the check boxes. Wen the user click in one of them I need to clear the other and them turn off the check boxes.
    My question is how can i do this?
    As far as I investigate, I don't have nothing similar to when-check-box-change in forms.
    My approach to this question ( that doesn't work ) is to define in the query to columns :
    CASE WHEN ACCEPTANCE=1 THEN
    APEX_ITEM.CHECKBOX(11, "ACCEPTANCE",'enabled','onChange= "test();"')
    ELSE
    APEX_ITEM.CHECKBOX(11, "ACCEPTANCE",'disabled' ,'onChange= "test();"')
    END "Rejected",
    CASE WHEN ACCEPTANCE=0 THEN
    APEX_ITEM.CHECKBOX(11, "ACCEPTANCE",'enabled','onChange= "test();"')
    ELSE
    APEX_ITEM.CHECKBOX(11, "ACCEPTANCE",'disabled' ,'onChange= "test();"')
    END "Accepted"
    the test function is a javascrit function the will disable the other checkbox. At this moment in time the function just send a message. the functiom is tested through a button the message is displayed but when the check box changed nothing happens.
    I appreciate if you can help me in this subject.
    Thanks

    Try this
    Query
      SELECT ...
              ,'<input type="checkbox" name="accept" value="1"  '||decode(ACCEPTANCE,1,'checked=checked',NULL)||'/>' ACCEPT
              ,'<input type="checkbox" name="reject" value="0"  '||decode(ACCEPTANCE,1',NULL,'checked=checked)||'/>'
              ||APEX_ITEM.HIDDEN(11,ACCEPTANCE)  REJECT
    FROM ..Now you should have two checkboxes in two column columns( and a hidden item which has the chosen value) and one of them checked(first one for acceptance column=1 and other if not)
    Now for some JS code which does the checkbox toggling
    Add the following code to "execute when page loads"
      $('input[name=accept],input[name=reject]').click( function() {
        other_checkbox = $(this).parents('tr:first').find('input[type=checkbox]').not(this);
        hidden_item = $(this).parents('tr:first').find('input[name=f11]');
        if (  $(this).is(':checked')  ) {
          other_checkbox.removeAttr('checked');
      else {
          other_checkbox.attr('checked','checked');
       other_checkbox.val( $(this).val() );
      });When the page submits the f11 array would have values 1 or 0 for each row which you can use in PLSQL processing.

  • Is it possible to center a checkbox in a table filter?

    Hi I am using Studio Edition Version 11.1.1.2.0.
    Is it possible to center a checkbox in a table filter without getting a bug? I have tried using a panelgroup with horizontal layout and Halign center. It looks good at first but when I use the filter the checkbox gets a dublicate which is left aligned above the original checkbox. Is there any way to center a checkbox inside a filter?

    Ok I will explain it as well as I can. I have a table with some columns that have an af:selectBooleanCheckBox in their body. These columns I have set the Align property to center because I think the layout looks better that way. This works fine.
    Now I also want to be able to filter these columns. Then I put an af:selectBooleanCheckBox in the filter facet and set the value of that checkbox to #{vs.filterCriteria.attributeName} which also seems to work but the checkbox in the filter facet is left aligned.
    So while I set the Align of the column to center the filter is not center aligned.
    I tried to get the checkbox in the filter center aligned by putting an af:panelGroupLayout where I set Layout: horizontal and Halign: center into the filter facet of the column and then put the checkbox into that af:panelGroupLayout.
    At first when the page is run the checkbox in the filter is in the center and everything seems fine but when you use the filter another checkbox that is left aligned and above the original one appears in the filter so that now I suddenly have 2 checkboxes in the filter.
    Below I have pasted the code of the table and one of these columns so you can see what I mean in case you still don´t understand me. I thought it would be enough to only paste the code of the table and one column but if the rest of the code is neccasary let me know and I will paste that here too.
    <af:table value="#{bindings.FvgQsPeriodTypeQuestionTyVO1.collectionModel}"
    var="row"
    rows="#{bindings.FvgQsPeriodTypeQuestionTyVO1.rangeSize}"
    emptyText="#{bindings.FvgQsPeriodTypeQuestionTyVO1.viewable ? 'No rows yet.' : 'Access Denied.'}"
    fetchSize="#{bindings.FvgQsPeriodTypeQuestionTyVO1.rangeSize}"
    filterModel="#{bindings.FvgQsPeriodTypeQuestionTyVO1Query.queryDescriptor}"
    queryListener="#{bindings.FvgQsPeriodTypeQuestionTyVO1Query.processQuery}"
    filterVisible="true" varStatus="vs"
    selectedRowKeys="#{bindings.FvgQsPeriodTypeQuestionTyVO1.collectionModel.selectedRow}"
    selectionListener="#{bindings.FvgQsPeriodTypeQuestionTyVO1.collectionModel.makeCurrent}"
    rowSelection="single" id="table2"
    partialTriggers=":::pc1:table1"
    columnStretching="column:QTCol">
    <af:column sortProperty="P01AsBoolean" filterable="true" sortable="true"
    headerText="#{bindings.FvgQsPeriodTypeQuestionTyVO1.hints.P01AsBoolean.label}"
    width="50" align="center" id="c6">
    <af:selectBooleanCheckbox
    label="#{bindings.FvgQsPeriodTypeQuestionTyVO1.hints.P01AsBoolean.label}"
    value="#{row.bindings.P01AsBoolean.inputValue}"
    id="sbc1"/>
    <f:facet name="filter">
    <af:panelGroupLayout id="pgl1" halign="center"
    layout="horizontal">
    <af:selectBooleanCheckbox value="#{vs.filterCriteria.P01AsBoolean}"
    id="sbc2"/>
    </af:panelGroupLayout>
    </f:facet>
    <f:facet name="footer"/>
    </af:column>
    </af:table>

  • Had CS4 on Power PC Mac (Non Intel) Now have new iMac and trying to install CS6 but won't accept serial number

    Had CS4 on Power PC Mac (Non Intel) along with prior Photoshop versions. Now I have new iMac and trying to install CS6 but it won't accept my original serial number (Starts with PSW401, etc.).

    I know what you are saying. I had purchased the CS5.5 upgrade, and a week later got the CS6 upgrade. I did this back in 2012. I had a old Mac Power PC which does not allow you to install CS5.5 or CS6 because it was not an intel processor. So even though I had the upgrades I never installed them. I waited until my old MAC died which it did this past weekend. And now that I have a new iMac I tried to install the new software. All of my past upgrades referenced my original Photoshop that was still resident on my old Mac. But since the install no longer has that reference because of the new computer, it will not accept any of my past serial numbers that it needs for the install.

Maybe you are looking for