Acceptance by Requestor - Process control workflow

Hi All,
I have followed the below thread and configured the "Acceptance by contact person" BRF for status REJECTED. Now when my shopping cart is rejected , i still see the  shopping cart as awaiting approval.This is sometihng strange as i expected soomething like "In Your Inbox".  In the approval preview i can see it is awaiting acceptance from me. however i am confused as there is no acceptance button in the detail of the SC.
do i need to go to edit mode? if i go to edit mode the SC workflow will start from the beginning as it behaves similarly  when we modify shopping cart awaiting approval .however acceptance would have deleted the shopping cart  item that were rejected and  workflow would have continued from that step onward.
please do let me know what i am experiencing is standard or thereis something wrong ??
Re: Enable work item to Requester at process End Check box
Cheers
iftekhar Alam
Edited by: Iftekhar Alam on Jul 5, 2010 1:51 PM
Also i have noticed that for completion step the rejection of SC i do not get the edit option . its only availbale for the approval type rejection step.

Hi Siobhan,
I am delighted to get OSS Notes from you. I have got reply in sdn faster than the oss message i raised for the same
However small calrification required.
1430274 Incorrect status display in POWL for par...
This note talks about application controlled workflow , we are using process controlled workflow. do you suggest implementing this??
1412458    Status "In your inbox" (2)...
i am going to implement this and test ,and would update after that.
1399239 New button "Show my Tasks" for document in a...
i am going to hold the implementation of this note , coz there is chance we might go for support pack upgrade and that would resolve and bring in additional functionaliy.
Cheers
Iftekhar Alam

Similar Messages

  • How to make a restart of the workflow in a process controlled workflow?

    Hi Experts,
    How to make a restart of the workflow in case of process controlled workflow? Scenario is like this:
    The user has created a shopping cart with 1000 USD. The process schema has three process level with the first level being approval with completion.
    The first level being executed by the responsible purchaser. Here, the purchaser adds the source of supply and changes the price of the shopping cart 2000 USD and approve the shopping cart.
    Now, I want the approval task to start from beginning so that the requestor can know the changes and accept/reject the changes.
    Thanks and regards,
    Ranjan

    Hi,
    Restarting workflow goes to 1st level approval step. It is not requester.
    I think you need to set condition for "Acceptance by Contact Person" in Define Process Level.
    Regards,
    Masa

  • How to trigger standard task manually in Process controlled workflow?

    Hi All,
    I would like to trigger a task mannually in BRF, process controlled workflow. My requirement is to send an approval notification to the approvers at the current approval level, at any instance by the requestor of the shopping cart. In that case, will it be possible to trigger the standard task 40007953 (SRM Shopping Cart Approval (1)) with the workitem of Shopping cart under consideration?
    I have tried searching for the same in SDN and other forums but most of the information was regarding application controlled workflows. None of those function modules seems to be working in PCW.
    Any pointers on how to trigger a standard task (using FM or code) in BRF(process controlled workflow) environment is also highly appreciated.
    Thanks,
    S.H@ri

    Hi,
    Use this FM [SAP_WAPI_START_WORKFLOW|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/bb9100f8-0c01-0010-ac8e-e017351f3fc1].
    Regards,
    Surjith

  • Approval preview process controlled workflow

    Hi,
    We are using process controlled workflow (N step) for the shopping cart workflows.
    While sending the reminder mails to the approvers, we would like to include the approval preview in the email.
    In application controlled workflows we could use FM BBP_WFL_DIN_APPR_CONTAINER_GET to get the approval preview details.
    Is there a similar function module to pick the approvers/approval status/step name etc for the process controlled workflows so that we can simulate the approval preview?
    Thanks
    BR
    Swetha

    Use class /SAPSRM/CL_WF_APV_FACADE. This is used by standard SAP WF Analysis.
    Methods - RETRIEVE_PROCESS_HISTORY, GET_CURRENT_PROCESS_STATE, CREATE_PROCESS_FORECAST.
    To analyze more, check the program /SAPSRM/WF_CFG_ANALYSIS_002. Check lines 209...216 (These Lines pull Previous Approved Steps, Current Process Step & Gets the approval forecast). However the REJECTED Items (Accept Decision) work little different (which is not captured by this report).
    To Identify the current approval process awaiting decision by the requester of the cart, use method GET_CURRENT_PROCESS_STATE, return parameter structure /SAPSRM/S_WF_PROCESS-PROCESS_LEVEL_LIST-DECISIONSET_LIST-ITEM_STATUS_LIST gets you the current status of the item (ACCEPTED, REJECTED, OPEN, INQUIRED). If ITEM_STATUS_LIST-ITEM_STATUS EQ 'REJECTED', then the WF is waiting for acceptance/resubmission from the requester.
    To your specific need, pass DOCUMENT_GUID to the class /SAPSRM/CL_WF_APV_FACADE=>GET_CURRENT_PROCESS_STATE get the return parameter /SAPSRM/S_WF_PROCESS. It will give you PROCESS_LEVEL_LIST. Then loop through DECISIONSET_LIST. It contains Table Types of AGENTS_LIST, ITEM_STATUS_LIST, WORKITEM_LIST. At /SAPSRM/S_WF_PROCESS level, you can get all the details of the current process level details
    Thanks,
    SC

  • SRM Process Controlled Workflow

    Hi Exports,
    I have created a Process schema for SC object type (BUS2121)..
    Looks like my process levels are trigged before the shopping cart is actually ordered by the user..
    Is this a normal behavior? or I am missing any configuration? or I need to have a additional process level initially to check whether the SC completed?..
    Please advice..
    Thanks in advance
    Bharath

    HI,
    Yes. That is correct task ID.
    FYI. Task ID List for Process-Controlled Workflow
    SRM Contract     BUS2000113               No Completion Task
              40007980     SRM_CT_APPR1     SRM Contract Approval
              40008003     SRM_CTR_Acc     Accept Decision / Adjust Document
              40007997     SRM_CTR_Revi     Revise Document
              40107926     SRM_CTR_RW     review document
    SRM Shopping Cart     BUS2121     
                                               40007952     SRM_SC_COMP1     SRM Shopping Cart Completion
              40007953     SRM_SC_APPR1     SRM Shopping Cart Approval (1)
              40007954     SRM_SC_APPR2     SRM Shopping Cart Approval (2)
              40007994     SRM_SC_Acc     Accept Decision / Adjust Document
              40007936     SRM_SC_Revi     Revise Document
              40007945     SRM_SC_RW     Review Document
    SRM RFx     BUS2200     40107917     SRM_BI_COMP1     SRM RFx Completion
              40007982     SRM_BI_APPR1     SRM RFx Approval
              40107922     SRM_RFx_Acc     Accept Decision / Adjust Document
              40007998     SRM_RFQ_Revi     Revise Document
              40107927     SRM_RFQ_RW     Review Document
    SRM Purchase Order     BUS2201     
                                               40007973     SRM_PO_COMP1     SRM Purchase Order Completion
              40007974     SRM_PO_APPR1     SRM Purchase Order Approval
              40007995     SRM_PO_Acc     Accept Decision / Adjust Document
              40007996     SRM_PO_Revi     Revise Document
              40107924     SRM_PO_RW     Review Document
    SRM Supplier Quote     BUS2202               No Completion Task
              40007981     SRM_QT_APPR1     SRM RFx Response/Bid Approval
                        No Adjust task
              40007999     SRM_QTE_Revi     Revise Document
              40107928     SRM_QTE_RW     Review Document
                        No Completion Task
              40008000     SRM_QT_APPR2     SRM Bid Approval
                        No Adjust task
              40107934     srm_bid_revi     Revise Bid
              40107935     srm_bid_rw     Review Bid
    SRM Confirmation of Goods/Service     BUS2203               No Completion Task
              40007987     SRM_CF_APPR1     SRM Confirmation Approval
                        No Adjust task
              40008004     SRM_CF_Revi     Revise Document
              40107929     SRM_CF_RW     review confirmation
    SRM Incoming Invoice     BUS2205               No Completion Task
              40008005     SRM_IV_APPR1     SRM Invoice Approval
                        No Adjust task
              40008006     SRM_IV_Revi     Revise Document
              40107925     SRM_IV_RW     Review Document
    Auto          40007988     SRM_AUTOAPP     Automatic Approval
    Auto          40007989     SRM_AUTOREJ     Automatic Rejection
    Regards,
    Masa

  • Inconstancy in Approval Workflow- Process Controlled Workflow

    Hello Experts,
    We are in SRM 7.0 classic scenario using process controlled workflow and facing an issue as described below:-
    During the approval workflow, we are observing that in
    Case 1: When approver3 is forwarding the work item to approver10, the approver10 in not getting the work item in his Inbox. However, when we see the log detail in SWI6 the status is shown as u201CREADYu201D
    Case 2: We created a shopping cart with identical details as in Case 1 and followed the same approval process i.e.Approver3 forwarding the work item to approver10, however in this case approver10 is getting the work item in his Inbox and when we see the log details in SWI6 the status is shown as u201CCOMPLETED"
    We tried this scenario for 10 times and we found that in 2 cases the approval status is showing as u201CREADYu201D while in other 7 cases the approval workflow got completed.
    Can you all experts please help us understand why this is happening and how can be find the root cause i.e why Case 1 is in u201CREADYu201D status for last 2 days.
    We seek your help in understandingroot cause so that we can eliminate any inconsistency in future.
    Any pointers to resolve this issue will be highly appreciated.
    Thank you in advance.
    Regards,
    RKS

    Use class /SAPSRM/CL_WF_APV_FACADE. This is used by standard SAP WF Analysis.
    Methods - RETRIEVE_PROCESS_HISTORY, GET_CURRENT_PROCESS_STATE, CREATE_PROCESS_FORECAST.
    To analyze more, check the program /SAPSRM/WF_CFG_ANALYSIS_002. Check lines 209...216 (These Lines pull Previous Approved Steps, Current Process Step & Gets the approval forecast). However the REJECTED Items (Accept Decision) work little different (which is not captured by this report).
    To Identify the current approval process awaiting decision by the requester of the cart, use method GET_CURRENT_PROCESS_STATE, return parameter structure /SAPSRM/S_WF_PROCESS-PROCESS_LEVEL_LIST-DECISIONSET_LIST-ITEM_STATUS_LIST gets you the current status of the item (ACCEPTED, REJECTED, OPEN, INQUIRED). If ITEM_STATUS_LIST-ITEM_STATUS EQ 'REJECTED', then the WF is waiting for acceptance/resubmission from the requester.
    To your specific need, pass DOCUMENT_GUID to the class /SAPSRM/CL_WF_APV_FACADE=>GET_CURRENT_PROCESS_STATE get the return parameter /SAPSRM/S_WF_PROCESS. It will give you PROCESS_LEVEL_LIST. Then loop through DECISIONSET_LIST. It contains Table Types of AGENTS_LIST, ITEM_STATUS_LIST, WORKITEM_LIST. At /SAPSRM/S_WF_PROCESS level, you can get all the details of the current process level details
    Thanks,
    SC

  • Process Control workflow - want to delete logical steps against one SC

    Workflow issue : Process control workflow
    In my scenario when requestor is creating a SC then workflow goes to buyer for assignment of supplier but when buyer himslef is creating a SC and forgot to attach supplier then workflow goes to error....i checked in SWIA its an error.....
    i come to know tht we can logically deleted those steps , so that when buyer open a SC in edit mode and assign Supplier then workflow will behave as normal.
    Please let me know where i can logically deleted the steps for particular work item ID.
    Smriti

    Hi ,
      Yes - what Masa suggested is the correct and the SAP Best Practice, I'll do the same. you can implement the BAID BBP_DOC_CHECK_BADI , where you check whether the requester is Buyer or not, if the requester is buyer , you can get the assigned role from BUS4101 by passing the user id or calling the FM 'BAPI_USER_GET_DETAIL'. if the  'ACTIVITYGROUPS'
    table from FM ''BAPI_USER_GET_DETAIL' has an entry 'SAP_EC_BBP_PURCHASER' then the requester is a buyer. you can write your logic after that to make sure the SC has assigned supplier or not. if the SC is not assign the supplier then raise the error message.
    Saravanan

  • How to determine N Step Approval process through Process Controlled workflow

    HI
    For SC approval process after 4th level of approval the workflow keep go N step till the approval determine. If no approval find then go for WF Exceptions.
    In PCW we have process level like 100, 200, 300 and so on. What would be the procedure for Nth process level determination in SRM process controlled workflows settings.
    Regards
    Kharabela

    Hi,
      From SRM 7.0 PCW, requestor of SC or creator(buyer) of the PO can't be in the approval list.. this is standard...
    create two custom events like zev_po_schema_eva and zev_po_sl_approval
    create two custom expression.. one with constants as zev_po_schema_def and other one is formula interpreter(0FB001)..
      assign zev_po_schema_eva as schema evaluation for PO.. MAKE SURE YOU LINK THE zev_po_sl_approval
      with as zev_po_schema_def..
       now create schema definition entry and specify as zev_po_schema_def..
       now create process level
       100 approval / approval with completion ( Your chooice ) .. maintain  zev_po_sl_approval as evaluation id in the process level... maintain RR_SPENDING_LIMIT_APPROVER as Resp.Resolver...
    maintain formula interperter value as (OV_SC_PREVAPPROVALIMI < 0V_PO_POTOTALVALUE ) AND (OV_SC_SPNDNGLMTFRQST < 0V_PO_POTOTALVALUE).
    Saravanan

  • Issue in Process Controlled workflow for Shopping cart in Quality system.

    Hello All,
    I ahve configured a Process controlled workflow in SRM 7.0  with custom resolver, and I am facing an issue taht the Workflow works well in Development but in Quality the approvers are dropped after SC is ordered in Quality system.
    The SC Workflow drops the approvers picked up from the Interface  method /SAPSRM/IF_EX_WF_RESP_RESOLVERGET_AREA_TO_ITEM_MAP and IF_EX_WF_RESP_RESOLVERGET_APPROVERS_BY_AREA_GUID of BADI /SAPSRM/BD_WF_RESP_RESOLVER. The approvers can be seen in the shopping cart Approval preview Tab until the SC is ordered.
    I have compared the OSS notes relevant for Workflow, all of them have been transported, Also I compared and checked general Workflow settings, BRF Config and  Process level  settings in Dev and Quality, everything is same.
    Also while debugging; the approvers can be seen in the decision set table in the create_process_forecast method of class /SAPSRM/CL_WF_PROCESS_MANAGER.
    Kindly let me know what else i can check to find the root cause.
    Thank you in advance for help!
    Regards
    Prasuna.

    Hello Vinita;
    Thanks for the input and sorry for the not so "ASAP" reply;
    From what I'm seeing in from your 2 screenshot, i strongly believe that the problem is even before the Z implementation /SAPSRM/IF_EX_WF_RESP_RESOLVER~GET_APPROVERS_BY_AREA_GUID (in which the FM i ZSRM_GET_USER_FROM_PGRP is called. I think the problem could be in the process level determination  ZSRM_WF_BRF_0EXP000_SC_APP100. Let me explain:
    In your  cases where not buyer is determined,  in the approval tab there is not even a process level for buyer approval. If the problem were indeed in the implementation  /SAPSRM/IF_EX_WF_RESP_RESOLVER~GET_APPROVERS_BY_AREA_GUID  then the process level would be there, but the system will display, instead of the name of the buyer(if the buyer determination fails) a red label with the message:  "With the strategy "Buyer determination" an approver could not be determined (or something like that..please check the image at the end of the text)".
    I can propose a way to discard this: Implement the method /SAPSRM/IF_EX_WF_RESP_RESOLVER~GET_FALLBACK_AGENTS of class ZCL_BADI_SC_WC (in case you didn't know, in this method you can specify an "default" approver in case that the determination of approver in GET_APPROVERS_BY_AREA_GUID fails). The idea is to specify an default approval and see how it behaves:
    If the user you indicated in the method GET_FALLBACK_AGENTS appears as approver, then yes, the problem is arises from implementation GET_APPROVERS_BY_AREA_GUID, in which case it could be a data problem (peharps in pposa_bbp?). You could also check in TX SU53 with the users with this problem to see if there's a missing authorization objetc.
    If, in the other hand, the "default" approver is not shown, it means that the process level buyer determination is not even called, so you should check in more detail ZSRM_WF_BRF_0EXP000_SC_APP100 and /SAPSRM/CL_WF_PROCESS_MANAGER > Determine process restart –method ----- (i have never used this method, so i could not tell if  it could be the source of the problem).
    Also, you could implement the method GET_FALLBACK_AGENTS in this way so the default approver would be the WF administrator indicated in the customizing (or you could just append directly any user you want):
    METHOD /SAPSRM/IF_EX_WF_RESP_RESOLVER~GET_FALLBACK_AGENTS.
       DATA: lv_admin_expr TYPE swd_shead-admin_expr,
             lv_admin      TYPE swd_shead-wfi_admin,
             lv_admin_type TYPE sy-input,
             ls_agent      TYPE  /sapsrm/s_wf_approver.
       CALL FUNCTION 'SWD_WF_DEFINITION_ADMIN_GET'
         IMPORTING
           default_admin_expr = lv_admin_expr
           default_admin      = lv_admin
           default_admin_type = lv_admin_type.
       ls_agent-approver_id = lv_admin.
       APPEND ls_agent TO rt_agent.
    ENDMETHOD.
    Error of agent determination:
    Please let me know the result of the test with the implementation of method GET_FALLBACK_AGENT. By doing this we could ensure if really the problem is in method GET_APPROVERS_BY_AREA_GUID or before.  I just made the test in our system and I'm almost sure that you wont get the default approver, but i could be wrong. 
    Any question please let me know.
    Best regards
    Cristian R.

  • Approver not determined process controlled workflow in SAP SRM 7.0

    Hello all,
    I have setup process controlled workflow in SAP SRM 7.0 EHP3 for shopping cart approval.
    I have 4 approval levels.
    I have used item-based Decision for entire document because for some items i want system approval.
    In implementation of BADI /SAPSRM/BD_WF_RESP_RESOLVER, in the method /SAPSRM/IF_EX_WF_RESP_RESOLVER~GET_AREA_TO_ITEM_MAP, i am skipping the items for which i want system approval.
    Also in method /SAPSRM/IF_EX_WF_RESP_RESOLVER~GET_APPROVERS_BY_AREA_GUID of BADI implementation class, i am keeping the approver table empty for the step which i want system approval.
    For example i have 1 item in shopping cart and for 1st step, based on some accouting criteria, i want system approval for 1st level and the workitem should go directly to 2 approval step when shopping cart is ordered. This is not happening.
    But if i have multiple items, and one item should have system approval based on some criteria and the 1st approval level should be system approval and other item should go to the 1st approver. This is happening and showing 'system' approver for item1 and 'appr_xyz' for item 2.
    For shopping cart having only 1 item, If i approve the shopping cart in this state only, it doesn't go to any approver and is not usable.
    am i missing anything in BADI /SAPSRM/BD_WF_RESP_RESOLVER??
    Please let me know.
    Regards,
    Yayati Ekbote

    Hi Adrian,
    Yes it is possible to display custom workflows in the Universal Worklist,  However, I am not sure what you are trying to do with a routing table.  If the workitems are of type decision, you can use UserDecisionHandler (action handler) configured in the XML file to use the Approve/Reject functionality - we are talking about webflow connector here correct?  R/3 connector?
    Regards,
    Beth Maben
    EP - Senior Support Consultant II
    SAP Active Global Support
    Global Support Centre Ireland
    **SDN Forum Moderator:
    SAP Enterprise Portal: Application Integration
    **SDN Universal Worklist Wiki:
    http://wiki.sdn.sap.com/wiki/x/ehU

  • Process-controlled workflow hang due to dump

    Hi all,
    due to a temporary dump in an SRM 7 system, some document-related workflows are stucked... in other terms, these workflow processes have been started, the the dump occoured and by now, they seems to be stucked in "in process" state.
    Tecnically, these are not workflow in error, so SWI2_DIAG is not helpful.
    We'd like to unlock this situation and -eventually- restart the workflow process. How can we do it?
    Thanks in advance for your help and support.
    edit: system dump is now solved, which means, triggering the same workflow process will result in a success.
    Edited by: Matteo Montalto on Jun 30, 2011 4:34 PM

    Ok. There used to be OSS Note 1458380 - Process Controlled Workflow Restart Program, if the document is in "Awaiting Approval" Status.
    Or do the manual restart by using tcode SWUE (Event trigger)
    Object Category - ABAP Class
    Object Type - /SAPSRM/CL_WF_PDO_SC
    Event - READY_FOR_WORKFLOW
    Object Key - <DOCUMENT_GUID>
    Event Parameter - <SC Creator User ID>
    and Click "Create Event" button
    Use SWI1 to check whether the event is created and see whether the document is submitted for workflow triggering or use SWI6 to check for that SC document

  • Process Controlled workflow

    Hello experts,
    We are trying to use process controlled work flow for SC approval. Approval process will be multiple based on the amount of shopping cart. Somebody has already activated BC set for one step approval in the system. If i want to have  my own process schema ( multiple approval ),what i supposed to do? Do i delete the existing schema attached to BUS2121 or create my own schema ?
    How system will determine which schema needs to be picked up after creation of SC?
    Regards,
    Sagar

    Hello Bharat,
    Thanx for reply.
    I have below cases for process controlled workflow.
    1.  No approval
    2. One step approval
    3.Multi level approval.
    All the above scenario will be decided based on the Z field which we have added to SC header. My understanding in this case is to have three process schema for above cases. Name of schema will be decided by Evaluation ID.
    Once the schema is decided then i need to define process level for each process schema.
    Please let me know if i am on the right track??
    Regards,
    Sagar

  • Process controlled workflow - SC process schema evaluation

    Hi experts,
    at the moment I'm using the n-step item level approval in SRM 5.0.
    We are implementing SRM 7.0. With the new process controlled workflow I'm not sure how to
    implement the logic of our "old" system.
    Depending on category and item value the SC item has to be approved by 0 - 7 users.
    I've created an event which finds a Z-process schema via FM.
    In the FM I've tried to change the process schema (debugger) for one SC item.
    But the schema has been changed for all items.
    Is it possible to use different process schemas for items?
    When yes how can I set the schema e.g.
    item 10 schema1
    item 20 schema1
    item 30 schema2
    item 40 schema1
    Thanks in advance for your inputs!
    Regards
    Stefan

    Hi,
    Schema Evaluation is document header level.
    There are 2 ways for implementation.
    1. Schema Evaluation returns Schema name. For example, 1 step approval, ... 7 step approval
    2. 1 Fixed Schema and 7 level evaluations. 1 Schema has 7 approval steps and each evaluation returns true or false.
    You have to implement GET_AREA_TO_ITEM_MAP method of Agent BADI to exclude/include items.
    BTW. If you set workflow framework as Application-Controlled Workflow, your old workflow logic works without any change.
    Regards,
    Masa

  • Process Controlled Workflow - Process Schemas

    Hi
    I am configuring Process Controlled Workflow in SRM 7.0 for shopping carts. As per one of the guidance documents, I activated the BC Sets for the shopping cart in order to pull in all the component parts. As none of the three standard Process Schemas created meet my requirements I am going to create my own Schema. Please could someone explain to me how I can ensure my schema will get activated, and not say  -  /SAPSRM/C_SC_600_001_SP04?
    Many Thanks
    Claire

    Hi,
    You can create custom schema definition. If you need only 1 schema, you can use constant type BRF expression.
    1. Create BRF event and Expression in transaction BRF
        BRF Event (ZEVALUATION1)
        BRF Expression (ZEXP1)  = Constant Schema name (ZSCHEMA1)
    2. Link the event and expression
    3. Customize Define Process Level
        Process Schema Evaluation = BRF Event (ZEVALUATION1)
                                                     - linked to BRF Expression (ZEXP1)  = Constant Schema name (ZSCHEMA1)
        Process Schema Definition (ZSCHEMA1)
          - based on your requirements
    Regards,
    Masa

  • Process controlled Workflow is not starting

    Hi,
    I have problems with implementing an own process-controlled workflow. The "Sample BC Set for Process Level Definition" /SAPSRM/C_SC_600_001_SP04 is working fine. However I do not succeed in triggering a customer Process Schema for BUS2121.
    The (first?) problem can be duplicated as following:
    1. BC-Set /SAPSRM/C_SC_600_001_SP04 is activated
    1.1 When creating a shopping card (Web Portal) a approver ("Head of organizational unit" in OrgManagement) is displayed in the Details (Approval-Workitem is created when saving the shopping cart)
    --> OK
    2. Deactivation of Process Schema 3C_SC_600_001 (replace Eval.IDs with customer Eval.ID which contains always false expression)
    --> When creating a shopping card (Web Portal) no approval data is displayed in the Details 
    --> OK
    3. Copy Process Schema 3C_SC_600_001 into ZC_SC_600_001; replace customer Eval.ID with original Eval.IDs (Boole; no process schema in expression (Eval-ID 3EV_SC_600_001_100; Expression 3B_SC_600_001_100: "Execute always"))
    --> When creating a shopping card (Web Portal) no approval data is displayed in the Details 
    --> NOT OK; the same result as with 1.1 is expected
    Why is 3. not working? Any ideas would be very welcome.
    Best regards

    In most cases, this means that the 'Start Process' is not configured correctly. Take a look at the following:
    1. make sure that the Wf assigned to your start process is active
    2. make sure that reference numbers are configured and assigned to your process
    3. assign a user to receive error messages when an error occurs
    Thanks,
    Derrick Banks

Maybe you are looking for