Accepted Appointments not visible in Room

Dear all
We have configured Groupware in our Portal. And created Meeting rooms with Calendar
But for some Room members the Meeting's related to their room is not visible, even though they accept the Meeting Request.
For some users the everything is coming perfectly
What can be the reason for this strange behavior?
Please provide your suggestions
Is this having any relation to the user profile?
Regards
Aparnna
Edited by: Aparnna Prasad on Feb 28, 2008 10:23 AM

Dear Vinit
Thank you for your help.
But the users who are having IE 6.0 ia facing the problem.
Only a few people are facing this problem.
Expecting help from all
Regards
Aparnna

Similar Messages

Appointments with option Working Elsewhere not visible in Scheduling Assistant

I have a problem with appointments that have the Show As option as "Working Elsewhere". When someone tries to use the scheduling assistant and selects someone who has an appointment set to "Working Elsewhere" the appointment is
not visible at all in Scheduling Assistant. If the person changes the appointment to Busy or Out of Office is becomes visible again to the person using Scheduling Assistant. Outlook 2013 and Exchange Server 2010 with the latest updates installed are being
used in our Environment. Is this type of behaviour by design or is it something else like using Exchange 2010 that doesn't support it fully?

Hi,
Based on my research and test, the WorkingElsewhere field is applicable for clients that target Exchange Online and versions of Exchange starting with Exchange Server 2013.
Between outlook 2013 clients and mailbox being on Exchange 2010, the meeting invite would show as "Working Elsewhere" for each of the attendees in their respective calendars but does not show any information regarding other attendee who accepted
the meeting request.
Thus, the Working Elsewhere field is visible in attendees’ Schedule Assistant with outlook 2013 and mailbox on Exchange 2013. Here is an article talked about it:
http://technet.microsoft.com/en-us/subscriptions/microsoft.exchange.webservices.data.legacyfreebusystatus
http://msdn.microsoft.com/en-us/library/microsoft.exchange.webservices.data.legacyfreebusystatus(v=exchg.80).aspx
Regards,
Winnie Liang
TechNet Community Support

TS1382 My I-Pod will not accept a charge. The battery icon I normally see while charging is not visible on the screen. The cord works fine to charge my I-Pad.

My I-Pod will not accept a charge. The battery icon I normally see while charging is not visible. The cord works when charging my I-Pad. Any ideas?

Please find "System Information" in this folder path---Applications > Utilities---and launch it. When it opens, find "Power" in the left-hand contents pane and click it to get something like this in teh main pane:
Copy everything in the "Battery Information" and copy/paste it here. The number values in that report may help us diagnose what is happening.
Also, did you buy this battery directly from Apple or from another source. There are an increasing number of reports showing up that suggests some counterfeit batteries being sold.

Train Stop Lables not Visible

Hi All,
I'm using Jdeveloper REL1 PS2 with ADFBC
I'm having a problem getting my train stop labels to render. Besides the train stop label not being visible, everything else is working as advertised. I can navigate though the train stops, the data on my pages appears as expected.. etc.
Here is what I've done so far:
1. I created a bounded taskflow with page fragments and checked "create train" checkbox.
2. In my task flow, I've assigned *<display-name>* values to each view activity participating in the train. See code below. According to the documentation I've read, this is what I need to set to label my train stops. However, when I run my task flow in a region, the the labels are not visible.
I've read section 18.8 in the Fusion Developer's guide, I've followed examples in these two blogs:
http://biemond.blogspot.com/2007/11/taskflow-train-in-jdeveloper-11g.html
http://biemond.blogspot.com/2008/06/advanced-taskflow-train-features.html
I've read previous posts regarding this issue like the this one:
Re: Creating ADF Train
Which states *"In Task flow click the View activity in structure window Right click Choose > insert inside > Display name and set the value to it."*
I also went through the train taskflows and pages in the Fusion Order Demo app and I cannot see how my implementation of the taskflow or how I'm adding the af:train component to my .jsff pages is different from the examples that I've found.
Any help would be appreciated. Thanks!
<?xml version="1.0" encoding="windows-1252" ?>
<adfc-config xmlns="http://xmlns.oracle.com/adf/controller" version="1.2">
<task-flow-definition id="EditEventTrainFlow">
    <default-activity id="__34">EditEventDetail</default-activity>
    <transaction id="__15">
      <new-transaction/>
    </transaction>
    <data-control-scope id="__16">
      <isolated/>
    </data-control-scope>
    <view id="EditEventDetail">
      <display-name id="__10">Edit Event</display-name>
      <page>/oracle/ou/oep/ui/pages/fragments/EditEventDetail.jsff</page>
      <train-stop id="__9"/>
    </view>
    <view id="EditEventRoomAssignments">
      <display-name id="__38">Assign Rooms</display-name>
      <page>/oracle/ou/oep/ui/pages/fragments/EditEventRoomAssignments.jsff</page>
      <train-stop id="__11"/>
    </view>
    <task-flow-return id="Submit">
      <outcome id="__13">
        <name>done</name>
        <commit/>
      </outcome>
    </task-flow-return>
    <task-flow-return id="Cancel">
      <outcome id="__14">
        <name>cancel</name>
        <rollback/>
      </outcome>
    </task-flow-return>
    <view id="ConfirmEventChanges">
      <display-name id="__18">Confirm</display-name>
      <page>/oracle/ou/oep/ui/pages/fragments/ConfirmEventChanges.jsff</page>
      <train-stop id="__17"/>
    </view>
    <train/>
    <control-flow-rule id="__19">
      <from-activity-id id="__20">*</from-activity-id>
      <control-flow-case id="__21">
        <from-outcome id="__23">cancel</from-outcome>
        <to-activity-id id="__22">Cancel</to-activity-id>
      </control-flow-case>
    </control-flow-rule>
    <control-flow-rule id="__24">
      <from-activity-id id="__25">ConfirmEventChanges</from-activity-id>
      <control-flow-case id="__27">
        <from-outcome id="__35">submit</from-outcome>
        <to-activity-id id="__26">Submit</to-activity-id>
      </control-flow-case>
      <control-flow-case id="__29">
        <from-outcome id="__30">goToEditEventDetail</from-outcome>
        <to-activity-id id="__28">EditEventDetail</to-activity-id>
      </control-flow-case>
      <control-flow-case id="__32">
        <from-outcome id="__33">goToRoomAssignments</from-outcome>
        <to-activity-id id="__31">EditEventRoomAssignments</to-activity-id>
      </control-flow-case>
    </control-flow-rule>
    <use-page-fragments/>
</task-flow-definition>
</adfc-config>

Hi,
You need to first name the view activity to desired name first and then change the display name.You will find a good example in JDeveloper Help Topics under Cue Cards>Work with ADF Technologies>Implement a Multi-Step page Flow with ADF Train>Step 2
For Ex:
In the Application Navigator, select the ViewController project and open the Create Task Flow dialog. Enter train-flow.xml in the File Name field. Select both Create as Bounded Task Flow and Create with Page Fragments. Then select Create Train and click OK.
From the Component Palette, ADF Task Flow page, Components panel, drag View and drop it on the blank canvas in the diagrammer. Rename the activity to start. Repeat the procedure to add three more view activities, using the following names: addresses, payment, review.
Drag and drop Task Flow Return on the diagram. Accept the default name of taskFlowReturn1. In the Component Palette, click Control Flow Case. On the diagram, click the review icon, then click the taskFlowReturn1 icon. Rename the control flow case element to commit.
In the Structure window, expand view - start . Right-click train-stop and choose Insert inside train-stop Display Name. In the Property Inspector, enter Start in the Display Name field. Repeat the procedure in step 6 to add train stop display names to the remaining view activities: view - addresses , view - payment, view - review . Use the following values, respectively: Addresses, Payment, Review. In the Application Navigator, select the ViewController project and open the Create Task Flow dialog again. Enter childtrain-flow.xml in the File Name field. Make sure Create as Bounded Task Flow and Create with Page Fragments are selected. Then select Create Train and click OK. From the Component Palette, drag View and drop it on the diagrammer. Rename the activity to billing. Repeat the procedure to add one more view activity, using the name shipping. Drag and drop Task Flow Return on the diagram. Change the name to childFlowReturn1. Draw a Control Flow Case from shipping to childFlowReturn1. Rename the case element to done. In the Structure window, expand view - billing. Right-click train-stop and choose Insert inside train-stop Display Name. In the Property Inspector, enter Billing in the Display Name field. Repeat the procedure in step 13 to add
Hope this helps!
Edited by: Swathi Patnam on Sep 9, 2010 2:16 PM

My recovery drive is not visible in my hp pavilion g6-2137tx

My problem is very big. I installed ubuntu alongside with windows 7.For that ubuntu created a special drive of 83 gb. After installing ubuntu my recovery drive was just shownig some text files but the recovery drive was full and still there..
so i decided to delete ubuntu so i went to disk management and formated that 83 gb partition but after that my laptop was not able to boot...It was not starting and just showed an error" no such partition".So i installed windows 8 from a disk.After the installation recovery partition is missing and it is not visible on "my computer".I think that i still have my recovery drive because my total partion is 463 gp and since my laptop is equiped with 500gb hard disk. Is there any way so that i can recover my partition and get back to original windows 7 which came with my laptop in the begining..
pls help

HI mohit12393,
Thank you for your query.
Reo is correct, your Recovery Manager was wiped when you installed from the disk. You do have the option to use your Windows restore, for your backups. Using Microsoft System Restore (Windows 8) You can also use third party software, to create an ISO image, which could be used to restore the computer, back to the time you created the image Here are some examples of ISO backup software.ex amples of ISO burning software.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Cd rom is not visible

hi, my cd rom is not visible and the pc does not recognise any cd i put in.
i have tried device manager and it says cd rom drivers are installed and working.
i have reinstalled windows 7 and it has made no difference.
hope someone out there can help.
i have a hp g72 laptop
cheers bertie

Hy Dear!!!
I am not any HP rep, but I think I can help you, Try this
Right Click on COMPUTER
Device Manager> DISK MANAGEMENT
Here is the Pictorial Help
Open DISK MANAGEMENT
- Right Click on CD ROM in RIGHT PANEL as shown,
- Click Change Drive Letter and Paths
- Now Click Add button and Assign the Drive Letter you want to and then Click OK as Shown
I hope this will help you out.
Regards
WAQAR AHMED KAMBOH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Regards
WAQAR AHMED KAMBOH
Please click on the KUDOS BUTTON on the left of this post as a sign of THANKS GIVING
Please click on ACCEPT AS SOLUTION if your problem Solved.

E5 memory card images and videos are not visible i...

am using nokia e5,it was working all well but few days before i tranferred files from laptop to my cell(images) using Mass Storage option by data cable.soon after that images and videos saved in memory card is not visible on phone.test mesgs and music files are visible but phone isnt showing my images and video files which ive recievd through bluetooth and saved in memory card.why is this so???plzzz help me am in mess cant help it

Hi saaraaz,
Welcome to the forum! I tried to transfer pictures via bluetooth and they were saved to gallery like they should. Please try the following actions and between them test if it works.
Firstly please make a back up with Nokia Suite. Then type in *#7780# = soft reset, no data lost.
If it's still the same, type in *#7370# = hard reset, the phone memory will be wiped. Restore back up. You can also try to make the back up without settings and then format and restore.
Reinstall the software. The process is the same when updating, but at the end select "reinstall".
Hope you get the device working again, please let me know if this is not the case.
Jampe
If the answer solves your issue, please click the ACCEPT AS SOLUTION button so other users can benefit from it as well. Giving a kudos (the white star) if my answer has helped will be appreciated.

Images Not Visible but Loading within Spry

I've built out a site using Spry numerous times and never had
any problems. But the below site I'm having issues with in that it
works fine in Safari but the images load within the Spry region set
(div id="mainContent") but are not visible. The images are
definately there as they can be viewed in a seperate window or
downloaded to the desktop.
w/w/w/./sl/im/press/./com (ignore / for domain name)
I've tried commenting out various elements in the css and
html and nothing seems to remedy this problem. Any help would be
super appreciated as I'm super stuck on this! The images don't load
in Firefox or Explorer. Thanks!

Hi bkerkay,
first try a rebuild of the library.
Try this:
Before doing a rebuild make sure iPhoto's trash bin is emptied. You can do this by control clicking on the trash bin, or from the menu bar under iPhoto.
Close iPhoto
Duplicate the iPhoto Library folder
Drag the duplicate to the desktop (hopefully you have enough room on your hard drive for the duplicate.)
Launch iPhoto holding down the Command and Option keys until you see the rebuild options screen.
Choose the first three options. If you were missing photos in your library, also choose the last option. Be advised that you will get a roll of orphaned photos and it might be quite huge. Most of them will already be in your iPhoto library, but use caution when deleting anything from this roll until you are sure the photos are still in your library in another place. It might be a good idea to share/export this roll of photos just in case you need to import them again.
Back to the rebuild, depending on the size of your library it might take some time. When it is done, hopefully your photos will be there.
You might see some unexpected results as I did when I did a rebuild. Photos had been moved to wrong dates, video clips had lost their duration info and some were even orphaned from the jpg pointer file. It took me some time to straighten it out again.
This is the reason to make a duplicate before you rebuild, in case you do not like the result. If you don't like the result, close iPhoto, then delete the rebuilt library and drag the duplicate back into the Pictures folder making sure the name is iPhoto Library. Launch iPhoto and it should open the library in the Pictures folder.
iPhoto 4 or later: Rebuilding the iPhoto Library
Get back with results.
Lori

Tab Not Visible in Internet Explorer 10

Hi,
We have developed application using oracle apex 4 and oracle 11g xe as database. Application runs perfect in Internet Explorer 8 and 9, Recently we upgraded browser to IE10 problem we are facing is there are more than 10 tabs in the application all the tabs are not visible in the application. Please suggest me how to fix this issue.
Thanks
Sudhir

Sudhir,
The fix you want is for the 10 tabs to work again in IE. Oh, boy! I hope someone can help with that.
But stepping back for a moment, 10 is a lot of tabs. Is 10 tabs all there will ever be? What if you need an 11th tab? I'm pointing out that it might be time to consider changing the way navigation is done. Now no one likes to comtemplate all the work and user disrutpion of changing the navigation method. But there's only so much room for displaying tabs.
But please see {thread:id=2519792} for some ideas.
Good luck,
Howard

Screen not visible

Screen flashes, remote client window is listed (in WIndow Menu), but not visible. It is as if it is off-screen somewhere. Any ideas? I have tried deleteing from the all computer list and reconnecting with no luck. Unfortunately it is a co-located Mini in a secure location - I can't easily get to it to put a real monitor on it.

I was able to see the log and these are the entries after I ran the kickstart routine. Is there anything unusual in there?.:
savantadev:admin admin$ tail -f /var/log/secure.log
Feb 2 13:57:15 savantadev /System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Ma cOS/AppleVNCServer[88972]: Authentication: SUCCEEDED :: User Name: pcottrell :: Viewer Address: xxx.xxx.xxx.xxx :: Type: DH
Feb 2 14:19:47 savantadev /System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Ma cOS/AppleVNCServer[88972]: Authentication: SUCCEEDED :: User Name: admin :: Viewer Address: xxx.xxx.xxx.xxx :: Type: DH
Feb 2 15:47:20 savantadev sshd[91196]: in pam_sm_authenticate(): Failed to determine Kerberos principal name.
Feb 2 15:47:25 savantadev sshd[91194]: Accepted keyboard-interactive/pam for admin from xxx.xxx.xxx.xxx port 55603 ssh2
Feb 2 15:47:25 savantadev com.apple.SecurityServer[46]: Session 0x2f394d created
Feb 2 15:47:25 savantadev com.apple.SecurityServer[46]: Session 0x2f394d attributes 0x20
Feb 2 15:57:10 savantadev com.apple.SecurityServer[46]: Session 0x2f04f4 dead
Feb 2 15:57:10 savantadev com.apple.SecurityServer[46]: Killing auth hosts
Feb 2 15:57:10 savantadev com.apple.SecurityServer[46]: Session 0x2f04f4 destroyed
Feb 2 16:01:58 savantadev /System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Ma cOS/AppleVNCServer[91468]: Authentication: SUCCEEDED :: User Name: pcottrell :: Viewer Address: xxx.xxx.xxx.xxx:: Type: DH

Content of second level TAB's not visible

Hi All,
I have designed a page have nested TAB's. When we click to on any first level tab, then the contents on the first second level tab is not visible. Neither there a Hyperlink to the title of that tab. How can the contents be made visible.
I am using oracle portal version 3.0.6.6.5
thanks

Hi,
unfortunately the behaviour got even worse in 3089. The behaviour Girish is describing is still there in 307. By the way, the content can be made visible by click the second subtab and then clicking the first subtab again (nice workaround huh..) Another way is to add a subtab and display it as the first subtab and give it a label like 'Make your choice..'
So I was anxiously waiting for 3089 because I too was told everthing would be fixed but to my astonishment in 3089 (upgraded and fresh install) the subtabs (displayed as a page portlet that is) do not work at all!!!!!!!!! Got TAR 1542074 logged for this. The only thing at this moment which gives an acceptable appearance is creating subtabs on the page itself (so without a subpage displayed as a portlet) and assign active/inactive images to the tabs. But this way you are spending more time working with Paintshop than with Portal. Please tell me that I am wrong about this (I hope I am...), but otherwise this really goes beyond my bug/new product tolerance level.
Tony

Navigator Not Visible in Directory Manager

On Win XP Pro Oracle Directory service does not start on boot, even though it is set to do so automatically. It will start manually from the Windows services app. After starting the service, oidctl runs successfully from the command line "C:\>oidctl connect=oid90 server=oidldapd instance=3 configset=0 start"
On start up Oracle Directory Manager (ODM) accepts the orcladmin/welcome logon and displays the connecting message and loading schema message. ODM opens but does not display the Navigator panel. ODM seems to be connected to the database because Objects, attributes, entries etc. are visible by selecting choices from the Operations menu.
When OID was first installed the navigator sometimes did and sometimes did not display. Now it is never displayed.
Any suggestions appreciated.

Hi Jay,
I am a Business Analyst and would like to get Oracle Workflow running so I can play with Workflow Builder. I'm just trying to get my hands dirty with this stuff. I want to use OID as a directory server for workflow.
I uninstalled 9.0.1.1 in installed 9.2.x.x. The results are similar.
The Bind request to LDAP failed error re-appeared. I had somehow worked around this on the previous install but I don't know how. The command ldapbind -h trburns -p 389 -D cn=orcladmin -w ohwgwead returns Cant contact ldap server. The error seems to be common as it appears in numerous postings but I havent seen a clearly described explanation and solution.
Do you have access to Oracles knowledge base? It must have a description of this problem.
I can open ODM after the bind failure by clicking the close icon. Double clicking the banner works in cases where the navigator tree is not visible. Many thanks for that tip.
Any authoritative information you could provide about the bind problem would be appreciated.
Thanks again,
Tom

Previous bean modification next and modification not visible

Hi,
I have a succession of jsf pages. On the first I set values of my managed bean then I click next. On the second I set other values. If I return on the first page and change the values I reinitialize the values of the second page but if I click on the next button the changes are not visible.
If someone can help me it will be great.

Baltaar, this is very frustrating. Either I am not making myself clear, or you are not listening. Please search the forums for pop-ups, follow the link I already gave you, and fix your JavaScript. I'm convinced you are simply not executing things in the right order, or are resetting values after the response has already been committed.
Here's why... The following code works for me.
Page1 just has a next button on it. I click it to get to a second page.
Page2 has a selectBooleanCheckbox, and a back button. Page2:
<h:form id="form">
     <h:commandLink id="backButtonImgTop" type="submit"
               action="#{navigationBean.back}" >
          <h:graphicImage id="backImgTop" value="/images/b_previous.gif"
               alt="Return" height="18" width="18" />
     </h:commandLink>
     <h:selectBooleanCheckbox id="tcAgree"
          value="#{commonInfoBean.accept}" validator="#{commonInfoBean.termsAccepted}" />
</h:form>I click the tcAgree checkbox to true and click the back button. NavigationBean runs the button click code. It resets the checkbox value to false. NavigationBean.back:
     public String back() {
          if (AppLogger.isDebugEnabled()) {
               AppLogger.debug("Navigation Back called by IP: '" + getIP() + "'...");
          String previous = "Page1";
          //DEBUGGING
          CommonInfoBean cb = (CommonInfoBean)getBeanFromContext(COMMON_INFO_BEAN_NAME);
          cb.setAccept(false);
          //DEBUGGING
          //return the last page viewed by the user
          return previous;
     }From the first page (Page1) I click to next to go to the second page. The value has been appropriately reset. Here's my output...
[Apr 23, 14:07:44] DEBUG AppLogger.debug() - Navigation Next called by IP: '127.0.0.1'...
isAccept called. Value=false
[4/23/07 14:07:51:423 PDT] 1b050a5c SystemOut O[b] isAccept called. Value=false
[4/23/07 14:07:51:423 PDT] 1b050a5c SystemOut O setAccept called. Value=true
[Apr 23, 14:07:51] DEBUG AppLogger.debug() - Navigation Back called by IP: '127.0.0.1'...
setAccept called. Value=false
[Apr 23, 14:19:55] DEBUG AppLogger.debug() - Navigation Next called by IP: '127.0.0.1'...
isAccept called. Value=false
All the beans I used are session scoped. I DID NOT include any JavaScript. My point is simply to say that it works without JavaScript and pop-ups in the way.
Baltaar, your problem is in your JavaScript like I've been trying to say all along.
CowKing

Calendar appointments not being sent

Hi, I am having an issue with our exchange server, Exchange 2010.
This issue just started happening out of the blue, Up to now everything was working properly.
We have a resource room mailbox established for a conference room (This is set up as a standard user) When a user schedules time with the room (They invite the room through a scheduled meeting) the is posted on the calendar of the meeting room as not accepted
and nothing else happens, The email that should be sent to the user that set up the meeting never arrives.
I don't see any errors in the event log to dictate why this would be happening, When i look at the mailboxes through the tracking logs I don't see any emails being sent back and forth, As well I checked all the settings
on the mailbox for automated processing and everything is set up as I originally set it up.
I setup a new user as a resource only mailbox, And the same thing happens with that calendar, I am also hearing users in the company are having the same issues,
Thanks,
Dave

Hi Dave,
From your description, the mailbox you use for conference is not a special room mailbox. It is a standard user mailbox. I think that is the problem, it should be configured as a room type and not a user mailbox.
If I have misunderstood your concern, please feel free to let me know.
What's more, about how to create and manage room mailbox, here are some helpful threads for your reference.
Create a Room or Equipment Mailbox
http://technet.microsoft.com/en-us/library/bb124952(v=exchg.141).aspx
Managing Resource Mailboxes and Scheduling
http://technet.microsoft.com/en-us/library/bb124374(v=exchg.141).aspx
Hope it helps.
If you need further assistance, please feel free to let me know.
Best regards,
Amy
Amy Wang
TechNet Community Support

Webcam not visible in Device Manager

Hello,
after a reinstalltion of windows 7 on my HP Pavilion 55SG the Webcam (HP TrueVision HD) is not visible in the device manager. I´ve searched for drivers of it but on the hp page there are none.
I have already installed cyberlinks youcam, but it says there is no webcam on my pc.
Is there any key combination to activate the webcam?
Thanks in advance!

Dear Customer,
Welcome and Thank you for posting your query on HP Support Forum
It looks like you are facing difficulties with regards to Webcam of your Notebook
We will surely assist you with this issue
Firstly I would like you to know that the Webcam might indeed be disconnected - it happens. The tiny wires that connect the webcam camera are fragile; they might disconnect, become twisted, or be crushed along the hinge area. The damage can occur at any time, or it may never happen. I have had some notebooks for many years in which the webcam has always remained fully functional. Every notebook is different.
Please click on the below shown link to find the troubleshooting steps to resolve the issue:
http://tinyurl.com/ogcpk9g for Windows 7
http://tinyurl.com/ob747gl for Windows 8
HP Technical Support / Customer Service Phone Numbers:
http://tinyurl.com/nxjotk7
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP

Accepted Appointments not visible in Room

Similar Messages

Maybe you are looking for