Accepting data in dos mode

now in india, java is being taught in ICSE syllabus as computer application. I find it very difficult to accept data during run time
in dos mode to teach the use of control structures.

A lot of people do, that is the motivation behind the BlueJ development environment.
http://www.bluej.org
Did you have a question to ask too?

Similar Messages

  • Can't view data in browse mode.

    I have a database of about 50 records I can view the data in list mode but when I switch to Browse the page turns grey. I trashed the preferences but no improvement.
    Any help?

    Hello
    - 1 - AppleWorks will NOT be updated. It will be replaced by iWork.
    - 2 - If you wish, you may attach your file to a mail and send it to:
    koenig then a dot then yvan then an @ then tele2 then a dot then fr
    If you do, I will be able to look if the file is working well on another machine.
    So you will know if the oddity is to be searched in your machine itself.
    Yvan KOENIG (from FRANCE mercredi 21 décembre 2005 9:12:42)

  • Running 10.6.8. Trying to open and view contents of a CD (of an MRI) and getting message 'This program cannot be run in DOS mode' Is there a way? Thanks for the help.

    Running 10.6.8. Trying to open and view contents of a CD (of an MRI) and getting message 'This program cannot be run in DOS mode' Is there a way? Thanks for the help.

    Go to the support site for the provider of the MRI software.
    Sounds like it windows/PC. I have ran across that for the CDs that veterinarians provide for digital x-rays.
    I would try on a PC or on yuur Mac with Windows via BootCamp or a virtual machine like VirtualBox

  • My computer wont let me download MP3 rocket because it says its in DOS mode.  Im 14 so if someone could help me turn it off step by step thank you.

    My computer wont let me download MP3 rocket because it says its in DOS mode.  Im 14 so if someone could help me turn it off step by step thank you.

    From what I know, MP3 Rocket is a program that will only work on a Windows computer. They don't make a version that will work on a Mac.
    If you need to convert Youtube files to MP3, then you may want to try Smart Converter. It is available in the App Store for free. Just launch App Store, then look in the Top Charts section, under FREE, select "see all", and look for the the download shown below.

  • I have a mac osx version 10.6.8 no windows and i am trying to install a program but keep getting can not run in dos mode  ( the disk says on back works on intel mac with parallels or vm fusion) is this program not compatible with my mac?

    i have a mac osx version 10.6.8 no windows installed and i am trying to install a program but keep getting can not run in dos mode  ( the disk says on back works on intel mac with parallels or vm fusion) is this program not compatible with my mac?

    You run Windows in Parallels or Fusion. Then in Windows you install the program.

  • When i try download a file from the internet it looks like its downloading then when i go to open this file it opens up in the app text edit and says it cannot open i DOS mode? Can anyne help?

    when i try to download a file from the internet it starts to download but when its finished it opens up in the app "text edit" and it says this file cannot open in DOS mode.
    Can anyone help?

    It sounds like perhaps the file doesn't have an extension that the system recognizes. Is this all files, or just one specific one, and if so, which? What is the name (and extension, if it has one) of the downloaded file? What kind of file do you *expect* it to be? (PDF, or whatever). Renaming a file with the appropriate extension can often fix that kind of problem.
    Matt

  • How can I get my system in and out of DOS mode?

    How do I get my system in and out of DOS mode?

    There is no "Dos-Mode" in OSX.
    Guessing that you tried to run an .exe file while in OSX ?
    These are meant to be run in Windows.
    Stefan

  • Precautions to be taken when AA is in Data Take over mode.

    Hi,
    We have an Live SAP System and we are plannning to load Legacy Assets in our system. These Assets are from an acquired Company. We Will be required to put the System in Data Take over Mode during the middle of the year for some time.
    Please let us know what would be the precautions that needs to be taken. For example: Depreciation run, Asset regular Postings, AUC settlements...etc.
    Thanks,
    Raja.

    Hello Raja.
    I believe that SAP note 49563 may help you.
    *This note also have some interesting 'Reference to related Notes'.
    I hope it helps,
    Thaiane

  • I am trying to reinstall Windows on my macbook pro.  I downloaded the support files and Windows 7 iso file to a USB drive.  However, when I try to run the setup.exe program I get the message "this program cannot be run in DOS mode."

    I am trying to reinstall Windows (would not launch).  I removed the partition and started over.  I downloaded the support files and Windows 7 iso file to a USB drive.  However, when I try to run the setup.exe program I get the message "this program cannot be run in DOS mode."  I was successful before, what am I doing wrong this time?

    Try a restart.
    If that doesn't fix the problem, shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application unistaller. For each disable/delete, you will need to restart if you don't do them all at once.
    Safe Mode
    Safe Mode - About
    General information.
    Isolating issues in Mac OS X
    Troubleshooting Permission Issues
    Step by Step to Fix Your Mac

  • Error when opening PowerPoint related to Data Execution Prevention Mode

    I am experiencing an error when attempting to open a PowerPoint file. . Here is the full message: "powerPoint is experiencing a serious problem with PowerPoint com add in. This add-in is incompatible with Data Protection Execution Mode and should be disabled or upgraded to the latest version. Do you wish to disable?" I am using PowerPoint 2010 and Adobe Presenter version 8.

    I've continually experience the same issues. I have updated to Presenter 8.02.
    If I open a project by double-clicking the .pptx file I get the following error message:
    "Run-time error '-2147467259 (80004005)
    SlideShowWindow (unknown member) :Invalid request. Automation rights are not granted."
    If I then enter the Presenter tab and click an option (for instance "Settings") Powerpoint crashes and restarts itself. Once restarted the following error message is presented:
    "PowerPoint experienced a serious problem with the 'adobe presenter powerpoint com adding' add-in. This add-in is incompatible with Data Execution Prevention mode and should be disabled or upgraded to the latest version. Do you wish to disable this add-in from loading?"
    I can often crash Powerpoint with the same DEP warning by closing the presentation with the window's "X" button - Powerpoint restarts itself and gives the same DEP warning as above.
    I normally choose to not disable and continue working. If I then go to "Settings" in Presenter again, it will open without problem. It seems that after four to six occurences like this, Presenter will then be disabled by Powerpoint and require resetting in the File-Options-Addins section.
    Alternately, if I open Powerpoint first and then open my project through the File-Open or Recent Presentations list I do not get the Run-time error mentioned above and usually can open a Presenter option ("Settings") without crashing Powerpoint. I can also close the project without incedent if I use the File-Close menu as opposed the the "X" button.
    I am running Win 7 64bit, Powerpoint 2010 32bit with Presenter 8.02.
    Sincerely hoping support is continuing to monitor these threads, as this one was started in November without much response.

  • Current  date  in  add mode ?

    i want to show the current  date  in  add mode but it s not working
    is there any changes thats working properly.
    If oForm.Mode = SAPbouiCOM.BoFormMode.fm_ADD_MODE Then
                oEdittext = oForm.Items.Item("MrolVal").Specific
                oEdittext.String = Format(DateTime.Today, "ddMMyy")
            End If

    Hi John,
    Try this Code:
    string dtdate=DateTime.Now.Date.ToString("MM/dd/yy")
    string strdate= GetEditTextDateValue(dtdate);
    public   string  GetEditTextDateValue(string  dtdate)
                   try
                        string date;
                        string Year,Month,Day;
                                  Day =(dtdate.Substring(0,2));
                                  Month=(dtdate.Substring(3,2));
                                  Year  =(dtdate.Substring(6,4));
                                  date =(Month.ToString() + "-" + Day.ToString() + "-" + Year.ToString());
                                  return date;
                   catch(Exception ex)
                        throw ex;
    And Finally you can set the Value as
    oEditText.Value=strdate;
    By this way you can set any kind of Date Value to the EditText.
    HTH
    Prashant Bansal

  • Retrieving acceptable date format

    I'm developing a script using SAP GUI Scripting API,
    There are some fields on user's screen which must be filled with a date.
    For some users, these fields accepts date in MM.DD.YYYY format, while for some others the accepted format is DD.MM.YYYY.
    My question is: How can I know which date format is accepted by a GuiComponent in order to make the correct input?
    Could not find any method or property in any component that could give me a clue.
    (I'm having troubles with decimal values too, once I cannot determine if the separator is a dot or a comma, but I suppose solving the date problem may lead to solving this one too.)
    Thanks in advance.

    Hi Ycarus,
    there are as always several solutions. One of these might look like this:
    For example, is the date entered as follows:: 01.03.2011
    on error resume next
    session.findById("wnd[0]/usr/. . .").text = "31.12.9999"
    if error.number > 0 or error.number < 0 then 
      session.findById("wnd[0]/usr/. . .").text = "03.01.2011"
    else
    session.findById("wnd[0]/usr/. . .").text = "01.03.2011"
    end if
    on error goto 0
    To find out whether a comma or a decimal point to be used as a separator, you could take a similar approach.
    Regards,
    ScriptMan
    Edited by: ScriptMan on Mar 28, 2011 11:10 AM

  • N660 TF 2GD5/OC and DOS mode

    I have Dell U2311H 23" FullHD monitor. With N660 TF 2GD5/OC in DOS mode (BIOS setup an so on) I don't have image extension to whole screen - there is 1.5-2cm black border around it. It is very strange because monitor shows 1920x1080x60Hz mode in menu.
    Monitor is connected to video card by DVI-D. I tryed both DVI ports on card without difference.
    Before I have used MSI NX8800GT-T2D512E-OC on the same system without such problem - there was full screen image for all video modes.
    Video card BIOS v80.06.10.00.5E. I made BIOS backup - it is absolutely the same as can be downloaded now from MSI download page for this videocard  (NV287MS222.ROM). Under Windows 7 card works fine.
    Could you explain such behaviour?
    Board: Asus P8H77-V  bios v1103
    CPU:  Core i5 3470 (i don't use intel graphics at all)

    contact msi at >>How to contact MSI.<< and see what they would say about it

  • Change acceptance date in I-recruitment

    I accepted an applicant in iRec but input the wrong date for acceptance. Now I want to change the date so that the applicant can be hired earlier than the accept date.
    But in fact, the applicant should be accepted on 2012-03-02 as he got onboard on 2012-03-05. With the wrong date of acceptance, the hiring date has to be postponed to at least one day after 2012-03-10, e.g., the earliest hiring day is 2012-03-11 in this case.
    We can’t update the date in iRec. Could you help to provide a solution to ensure that the issue can be fixed and the applicant can be hired on time.

    Hi,
    You can change the date from Core HR form.
    Search for the Applicant ->Click on Other->Application and change the Accepted status and update the Date.
    Thanks

  • How i can change the arabic date and time mode to english date and time mode

    how i can change the arabic date and time mode to english number mode

    Settings app > General > International > Region format.

Maybe you are looking for

  • Novice , need help with upload error

    My original hosting company went south and not all my files were backed up..., but one application i'm having trouble with on the new server and I can't identifing the cause of the error.. this is the error.. don't know if i'm missing a script or som

  • Lenya Help

    Hi I have successfully installed Lenya in my machine. However, after logging in when i try to create any document through default or blog publication, it shows lot of exceptions like below: Kindly help me out in solving this issue pls.......... its v

  • Xcode download from the app store trashed by development environment and I cannot recover by downloading again

    I downloaded xcode and it trashed my development environment. I had previously installed an earlier version. My purchased apps page does not list XCODE.  However, If I go to the XCODE download page in the App, it lists it as installed. Any suggestion

  • Php select using column Field names ?

    Hello, I need some advice using this select usually I do this $query = "SELECT * FROM table WHERE title LIKE 'body'"; it works, is fast and no problems. But now I've a big table [id, ..., ...] and need to select just the row starting with body, so I

  • ICal Calendar Invite

    I'm using iCal to send appointment emails and am having trouble with them. I have multiple accounts set up on my iMac and sometimes my email comes from my work email (that's the preference) and sometimes they come from my personal account. How do i m