Acces both network interfaces at the same time

Hello community,
I have a little problem that I cant seem to solve.
My iMac is connected wired to a network wich has all ports blocked except the the neccecery ports wich are required for the company network.
Besides that, there is also an open wifi network wich has no ports blocked. In order for iMessage to work properly, I must use the wifi network, however when wifi is activated and is set as the first network, work related software dont work since they need a connection to the secure network.
So my question is:
Is there any way to acces both networks at the same time ?
Or let one app use one network connection and another app use wifi.
Thanks a lot!

The behavior you describe sounds quite unusual. Can you provide a screenshot of the window you are attempting to move?
If you are describing the process of moving a tab from one Internet Explorer window to another on a separate screen, you do not need to drag the tab to the taskbar icon when transitioning between
windows, you can drag the tab directly from the row of tabs on one window to the other.
If you are clicking a button in the window bar that minimizes multiple windows simultaneously, you may be describing a third party window management application (NVIDIA nView, AMD HYDRAVISION).
Brandon
Windows Outreach Team- IT Pro
Windows for IT Pros on TechNet

Similar Messages

  • Can the airport express be used to stream music and act as network "extender" at the same time?

    I have a time capsule as my base station but need to improve network coverage in the other end of the house. Have a new airport express that I use for music streaming. Can this airport express be used for both music streaming and "network extension" at the same time, or do I need to buy another product?

    Yes, it can. You can either:
    Extend a wireless network. The Express needs to be positioned half way between the TC and the area without network coverage, and can be flakey. This is wireless only.
    Use Ethernet/Powerline. This is the preferred option (called a roaming network in Apple terminology). This allows for the Express to be placed wherever you want, as long as it reaches the other end of the house.

  • 2 network connections at the same time

    I have 2 network connections at the same time. One for network shares and one for internet. How can I decide which connection should be used for which service?

    David684,
    Thanks for posting all of this.  I have a similar network question with a very similar setup that I am using with two interfaces. However, I am much less comfortable with the command line than you appear to be (although comfortable enough to crib little tweaks from the web and run them).
    The real difference is the resources I'm after and it seems like more of a problem. In my case, I'm running my home wireless network and can connect at decent speeds, but I happen to live right across from campus where I am attending grad school and I'm picking up the school wifi network. Having direct access to this network, among other things, allows me to access library research journals and databases from home without constantly needing to authenticate. But it isn't nearly enough to accomodate all of my network needs. The key difference, then, is the fact that these come in the form of websites. But I want to access only library stuff over that we-fi connection and do everything else from the LAN.  I use an app called papers for research, which has a built in web browser to allow me to pull up articles and then save them. Would that help me by allowing me to have just that program use wi-fi? I am not sure if the app is using an embedded safari session or it's own home-rolled browser, or how to check in the first place (OR if that makes a difference as far as being able to route the app's traffic to that interface). Also, with all of that said, how could I find out the subnets over which to route this if what I'm going after is a far less tangible resource than an SMB share? I am guessing I need a different method or that none exist?
    Thanks

  • Can you run Edirol / Focusrite firewire interfaces at the same time?

    Hey Guys,
    I have an Edirol FA-101 but i'm just about to get a Focusrite Saffire (or maybe a Motu 8pre...haven't decided yet) and was wondering if I can run the 2 interfaces at the same time for more inputs...i know i can chain 2 of the edirol ones but i'm not sure if it works with different makes.
    Thanks

    so I actually did get myself a focusrite saffire pro 26 and it's pretty cool (apart from the focusrite computer side interface that seems to have a few bugs when you control by hardware...)
    I'm probably gonna get myself an octopre or a twintrack pro to make use of at least some of the extra digital inputs but for now I have the semi redundant Edirol FA-101 in my rack, if I can get the two working together then that's great!
    I have tried what you said and it did pair them together however it made a really awful noise when trying to record, just intense digital distortion and i'm not really sure why. I'm running it all from a macbook pro with only one FW port (that has the Saffire / Edirol / FW Hard drive / Liquid Mix running from it in that order) do you think this order is more the problem?
    Dave

  • Control surface and interface at the same time

    Is it possible to plug in a control surface and an interface at the same time? My plan is to use a Mackie Control Universal Pro (USB) for my control surface and a Focusrite Saffire Pro 40 IO Firewire Interface for monitor use during mixing. Will Logic Pro 9 allow me to do this?

    Thank you

  • Why cant I see BOTH video tracks at the same time?

    I read all the manuals,I swear.
    I make film collage and want to do multiple layer exposures of different clips.
    So far I just have two video tracks-
    Why cant I see BOTH video tracks at the same time,I mean each track will create another layer,or exposure that will both play back viewable simultaneously right ?Or would that be considered "layering"?
    Does this have anything to do with the source vs. destination thing ?

    FCE plays back video tracks in a "top-down" manner: that is what's on track 3 obscures what's on track 2 which obscures what's on track 1. You can control scale, position and opacity of each clip on each track so that you can get the layering you seem to be after.

  • Have created multiclip.  Moved it from browser to viewer.  Saw that the 2 angles were not sync'd.  Held down control/shift on one angle to scroll through clip to put them into sync.  Both angles move at the same time.  What is happening?

    Created Multiclip in browser.  Moved it to the viewer.  Saw that they were not exactly sync'd.  Held down shift/control to move one angle to match the other.  Both angles move at the same time.  What is happening?  I have done this before and have always been able to re-sync my clips to do my edit.

    correction needs to be made to step #14, I typed:
    14) Point to the start or end one of the clips, when you see the icon showing arrows going either way, right click and drag your clips to roughly match up with the timeline selection, then zoom in further and adjust the clip start and end points to match up exactly with the timeline selection start and endpoints.
    Here is the correction, THE CORRECTED PARTS ARE CAPITALIZED:
    14) Point to the start or end OF one of the clips, when you see the icon showing arrows going either way, LEFT-CLICK and drag your clips to roughly match up with the timeline selection, then zoom in further and adjust the clip start and end points to match up exactly with the timeline selection's start and end points.
    Another Correction:
    Originally read:
    Addendum: IF you have 2 files selected and click "Edit" to go to Edit view, it will give you the file of the clip you selected first, not 2nd. You must then go back to MT view, de-select the clip you selected first, then de-select the clip you want to edit, then RE-select the clip you want to edit.
    Here is the the correction, CORRECTED PARTS ARE CAPITALIZED:
    Addendum: IF you have 2 files selected and click "Edit" to go to Edit view, it will give you the file of the clip you selected first, not 2nd. IF YOU WANT TO EDIT THE 2ND FILE YOU SELECTED IN MULTI-TRACK VIEW, You must go back to Multi-track view, de-select the clip you selected first, then de-select the clip you want to edit, then RE-select the clip you want to edit, THEN CLICK "EDIT" TO GO TO EDIT VIEW.

  • Hello. I dropped my ipad first gen from my chair, about 2 feet above the floor. The screen went black and I can't turn it on again. I have tried holding both buttons down at the same time, but nothing happens. Any help?

    Hello. I dropped my ipad, first gen, from my chair to the floor. The screen went black and I can't start it again. I have tried to hold both buttons down at the same time, but nothing happens. Any help?

    You will probably have to contact Apple for repair but before you do try this:
    Turn your iPad upside down on your lap and give it a hard smack on the back.

  • MBA will not allow me to use both usb ports at the same time.

    My MBA will not allow me to use both usb ports at the same time. as soon as i plug the second in the first is disabled. trying to use a modem and printer.

    What kind of peripherals are you connecting? Sometimes if an external device is drawing too much power, then it will shut down one of the USB ports. Make a test connecting two usb flash drives, it should work ok.

  • We have a PCI-6110S to run our VIs. But, we are planing to buy another card (PCI-6024E​) to run real time PID vi. So, if they are installed at the same computer, would it be a problem for LabVIEW to run both of them at the same time.

    We have PCI-6110 S series installed in our computer. We are planing to purchase PCI-6024 E series card. They will be both installed at the same computer.
    1) I am wondering if we run both of them at the same time, would we have any problem?
    2) To run PID real time, can any E series of PCI card be used?
    Thanks...

    Hello Baho,
    1) Using Traditional NI-DAQ, there could be problems with the fact that the NI-DAQ driver is not multi-threaded; meaning that while waiting for one operation to complete, the driver could cause another operation to time out. On the other hand, DAQmx is multi-threaded, and would eliminate this problem. At the time of this writing though, DAQmx does not yet support simultaneous-sampling boards like the PCI-6110S. A good solution then would be to use Traditional DAQ for the 6110S and DAQmx for the E-series board, and they would by default run in separate threads.
    2) No, using a PCI E-Series board, the LabVIEW VI would have to run in a Windows OS and would not be Real Time or run deterministically. You can run the PID program in Windows, but the
    results could be inconsistent. The advantage of a Real Time is that the OS is deterministic or that the OS allows you to tightly control or determine the maximum time any function takes to operate. This kind of control of the maximum operation time is not possible with non-Real Time OSs such as Windows.
    If you would like to get set up with a Real Time System, I suggest you contact your Technical Sales Representative.
    Regards,
    Chad Evans
    National Instruments

  • Can the USB-8451 run both I2C & SPI Interfaces at the same time?

    I have an 8451 on the way and initially will be developing a driver for our product using the SPI I/F.  I am also developing a test setup that will use the I2C I/F and need to know if 1 8451 will handle both at the same time or will I have to re-configure each I/F when I need to use it if I have only 1 8451 in the system? 
    The SPI driver will communicate with our product & the I2C I/F will communicate with the test fixture...
    TIA

    Well, you may be only able to open 1 VISA session to the 8451, but that doesn't mean you cant use both SPI and I2C at the same time.  I guess it depends on what your definition of "same time" is.
    I have a project that uses 4 SPI channels and the I2C using a single OEM 8451 simultaneously without having to create a new session for each use.  Just create and store (I do it as class data) the visa session handle and create and store all your channel references.  Each channel you create does not need its own VISA session.   I access the 8451 from several different VIs asynchronously without any problem.  The VISA protocol will sort out coincident requests.
    Buying a seperate 8451 should definitely not be required
    Bill F

  • Hi! I have 2 pc. Can I use my creative cloud on both, but not at the same time?

    I want to use my creative cloud account on my both computers. I have one laptop and one desktop.
    Is it possible to do that? Of coure not on the same time.
    Viveka in Sweden!

    Yes.
    Mylenium

  • I have 2 iphone 4s on my account and they both now ring at the same time

    Mine and my son's iphones have become "linked." We both get the same calls at the same time, whenever he adds something to his phone, it shows up on mine as well. How can we "un-link" them?

    Note:  this bug - I mean feature - happens even if Facetime is turned off on both iPhones.  These arrogant social media programmers can be really annoying.  What?  You want to use the iPhone as a phone?  How quaint.

  • My iphone 5 will not turn on ... i have held both buttons down at the same time and I get nothing ...it is fully charged ....any other suggestions?

    My iphone 5 will not turn on ....I have held both buttons down at the same for a long time and get nothing ...it is fully charged ....and other suggestions?

    The screen on my iPhone 5 (iOS 8.1.3) went dark after unplugging it from the PC.  I could still could see a backlight on the screen, but unresponsive.  iOS was hung in this state.
    I opted to try a reset holding power and home button, which succeeded in turning off the phone.
    After that, the screen went completely off.  Power button didn't appear to turn on the phone.
    Upon plugging back to iTunes, I discovered, even as the screen was pitch black, the phone was actually able to power on, or off if I repeated the reset....I could hear the USB connection chime on the PC every time I powered on or reset.  The iOS was in some sort of corrupted state with no screen output.
    I couldn't restore to factory settings, as iTunes requires I disable "Find My Phone" on the phone itself, which I couldn't do without screen output.  Also tried to put the phone in "Recovery Mode"...didn't work either.
    I finally succeeded by:
    Logging in via web browser to iCloud, locating the phone with the "Find My Phone" web app, and triggering [Erase].  iCloud reported the phone was successfully erased.
    After a minute, the phone rebooted itself and screen output worked again.
    I then restored my data and settings from my last backup using iTunes without further issues.
    Hope this helps others.

  • Both windows minimising at the same time?

    Hi I was wondering how to stop both windows from minimising at the same time. When ever I want to move a window from one screen to the other (Dual screen) I am unable to do so because both windows minimise? and when I click the top of the window
    to move it both are transferred to the other screen. PLEASE HELP ME THIS IS FUSTRATING.

    The behavior you describe sounds quite unusual. Can you provide a screenshot of the window you are attempting to move?
    If you are describing the process of moving a tab from one Internet Explorer window to another on a separate screen, you do not need to drag the tab to the taskbar icon when transitioning between
    windows, you can drag the tab directly from the row of tabs on one window to the other.
    If you are clicking a button in the window bar that minimizes multiple windows simultaneously, you may be describing a third party window management application (NVIDIA nView, AMD HYDRAVISION).
    Brandon
    Windows Outreach Team- IT Pro
    Windows for IT Pros on TechNet

Maybe you are looking for