Acces to cFolder from ME23N in ECC6

Dear Sirs, in the additional data of ME23N on our ECC6
there is a button called "CFolders".
Pressing that button the system shows the MEPO300 mesage
beacause no customization is present for cFolder.
I have putted in customizing one line in "Specify cFolders System Data"
but without any result; i have seen the standard code reads the table
tmmpurcfolders after the pressure of the button: what kind of data have we
to write in that table.
Another question: we have already a cFolder external system user for SRM, is it possible
to link this kind of documents using this button and relative badi/exits ?
Regards, Riccardo Galli - Hera

>
SapCoder1 wrote:
> Hi,
>
> I have made some changes in a PO related smartform, and its working fine in the development after making the changes. But, as I have transported it to Quality server, and trying to display the print preview from me23n, it is directly going to SE38 main screen. Please suggest where is it going wrong?
Seems like your debugger was left on by ABAPER on ME23n. Please check with abaper and they will solve this issue.

Similar Messages

How to get the PO no in the smart form and in the print program from ME23N

hello all,
I am new to smart form printing.I want to make a smartform along with print program that will show PO Details.It has to be created as an o/p type in ME23N. I have created an o/p type ZPO using NACE ..Can some one tell me how to get the PO number in the smart form and in the print program from ME23N ,so that I can then program the necessary calculations?plz help me with the code.Thanks in advance.
Subhabrata.

Hello Everyone,
I am new to the forum and also to abap.
Excuse me if it is a basic question.
I am taking care of the output types.
This is 1st time SAP will be implemented .
For purchase order , I go to NACE ---EF----NEU---Processing routines
print output---SAPFM06P---ENTRY_NEU----MEDRUCK
FAX-----------SAPFM06P---ENTRY_NEU----MEDRUCK
EDI------------RANASTED--EDI_PROCESSING
DISTRIBUTION(ALE)---RANASTED---ALE_PROCESSING
Are the above settings fine ?
What are the standard programs for the PO outputs . I am looking for the smartforms and the driver program .
I searched and found that IN ECC 6 , we have to install OSS notes .
Gurus, please help me . Let me know what all oss notes be implemented and how to proceed from here .
Any help will be greatly appreciated ,
Monalisa

How to fetch PO item delivery address from ME23n

Dear Experts,
From ME23n, I have to fetch the delivery address for the po items ( at item level). This is mentioned in the 'Delivery Address' tab at item level details.
I think this is the plant address, but if the user goes to ME22n and deliberately changes the address, I have to select this modified address.
How to do this?
Thanks in advance

Hi Shweta,
If Address is not changed, then extract address information as below.
Select <adrnr> from t001w where werks = <ekpo-werks>.
Select <required columns> from adrc where adrnr = <t001w-adrnr>.
If address is changed, then extract information as below.
Select <required columns> from adrc where adrnr = <ekpo-adrnr>.
Column adrnr in EKPO will be blank if no changes has been made to the address, and if address is changed this column will have the value of new address number
Regards
Vinod

How to call ME1P from ME23N

Dear Experts,
      From Me23N, I want to call the report ME1P (PO Price History), for the selected material.
      I have tried the user exits and enhancements available for ME23N as far i know, but not able to succeed.
      I have searched the forum also and not able to find any answers.
     Can you please tell me the way to do it.
     Thanks in advance.
Thanks and Regards,
James.R.M

Ok
So run trx CMOD and crate a new project and assign enhancement MM06E005 to it.
Then go to enhancement componen and active:
- EXIT_SAPMM06E_016
- EXIT_SAPMM06E_017
The exit 016 and 017 are for export data from standard screen to exit: probably u need only one but I'm not sure which is, so try both exit
The u should see the screen-exit area, do a double click on 0111 in order to create it: it's a subscreen, here u can insert your button
Max

866VAE - cant acces web pages from LAN

Hi everyone,
im fighting with Cisco 866VAE-K9 for few days. I have got ADSL2+ line in Cisco, i can ping anything from router (like 8.8.8.8 or www.google.com), test of connection in CCP runs successfully, but i cant acces web pages from LAN computers. From LAN i can ping to any IP adress in internet (like 8.8.8.8), but i cant ping or access domain names of web pages (like www.google.com). I know there is probably something wrong in my config, but after 2 days of googling i cant find where the problem is. Can anybody help?
Here is my running config:
Building configuration...
Current configuration : 8181 bytes
! Last configuration change at 11:31:15 UTC Fri Mar 6 2015 by admin
version 15.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname cisco_866vae
boot-start-marker
boot-end-marker
logging buffered 51200 warnings
enable secret 5 xx
enable password xx
aaa new-model
aaa authentication login default local
aaa authorization exec default local
aaa session-id common
wan mode dsl
ip port-map user-protocol--1 port tcp 3500
ip name-server 8.8.8.8
ip cef
no ipv6 cef
parameter-map type protocol-info yahoo-servers
server name scs.msg.yahoo.com
server name scsa.msg.yahoo.com
server name scsb.msg.yahoo.com
server name scsc.msg.yahoo.com
server name scsd.msg.yahoo.com
server name cs16.msg.dcn.yahoo.com
server name cs19.msg.dcn.yahoo.com
server name cs42.msg.dcn.yahoo.com
server name cs53.msg.dcn.yahoo.com
server name cs54.msg.dcn.yahoo.com
server name ads1.vip.scd.yahoo.com
server name radio1.launch.vip.dal.yahoo.com
server name in1.msg.vip.re2.yahoo.com
server name data1.my.vip.sc5.yahoo.com
server name address1.pim.vip.mud.yahoo.com
server name edit.messenger.yahoo.com
server name messenger.yahoo.com
server name http.pager.yahoo.com
server name privacy.yahoo.com
server name csa.yahoo.com
server name csb.yahoo.com
server name csc.yahoo.com
parameter-map type protocol-info msn-servers
server name messenger.hotmail.com
server name gateway.messenger.hotmail.com
server name webmessenger.msn.com
parameter-map type protocol-info aol-servers
server name login.oscar.aol.com
server name toc.oscar.aol.com
server name oam-d09a.blue.aol.com
crypto pki trustpoint TP-self-signed-2886901321
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-2886901321
revocation-check none
rsakeypair TP-self-signed-2886901321
crypto pki certificate chain TP-self-signed-2886901321
certificate self-signed 01
controller VDSL 0
class-map type inspect match-any SDM_BOOTPC
match access-group name SDM_BOOTPC
class-map type inspect match-any ccp-cls-protocol-p2p
match protocol edonkey signature
match protocol gnutella signature
match protocol kazaa2 signature
match protocol fasttrack signature
match protocol bittorrent signature
class-map type inspect match-all ccp-cls--1
match access-group name all
class-map type inspect match-all ccp-cls--2
match access-group name all1
class-map type inspect match-any ccp-cls-protocol-im
match protocol ymsgr yahoo-servers
match protocol msnmsgr msn-servers
match protocol aol aol-servers
class-map type inspect match-any SDM_SSH
match access-group name SDM_SSH
class-map type inspect match-any SDM_HTTPS
match access-group name SDM_HTTPS
class-map type inspect match-all SDM_GRE
match access-group name SDM_GRE
class-map type inspect match-any SDM_SHELL
match access-group name SDM_SHELL
class-map type inspect match-any sdm-cls-access
match class-map SDM_HTTPS
match class-map SDM_SSH
match class-map SDM_SHELL
class-map type inspect match-all sdm-access
match class-map sdm-cls-access
match access-group 101
policy-map type inspect ccp-policy-ccp-cls--1
class type inspect ccp-cls--1
pass
class class-default
drop
policy-map type inspect ccp-policy-ccp-cls--2
class type inspect ccp-cls--2
pass
class class-default
drop
zone security out
zone security in
zone-pair security sdm-zp-in-out source in destination out
service-policy type inspect ccp-policy-ccp-cls--1
zone-pair security sdm-zp-out-in source out destination in
service-policy type inspect ccp-policy-ccp-cls--2
interface Loopback0
ip address 192.168.100.1 255.255.255.0
zone-member security in
interface ATM0
no ip address
no atm ilmi-keepalive
interface ATM0.1 point-to-point
pvc 8/48
oam-pvc manage
pppoe-client dial-pool-number 1
interface Ethernet0
description $ETH-WAN$
no ip address
shutdown
pppoe-client dial-pool-number 2
interface FastEthernet0
no ip address
interface FastEthernet1
no ip address
interface FastEthernet2
no ip address
interface FastEthernet3
no ip address
interface GigabitEthernet0
no ip address
interface GigabitEthernet1
description $ETH-WAN$$FW_OUTSIDE$
ip address dhcp client-id GigabitEthernet1
ip tcp adjust-mss 1412
shutdown
duplex auto
speed auto
interface Vlan1
description $FW_INSIDE$
ip address 192.168.7.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
zone-member security in
ip tcp adjust-mss 1412
interface Dialer1
no ip address
interface Dialer2
description $FW_OUTSIDE$
ip address negotiated
ip mtu 1452
ip nat outside
ip virtual-reassembly in
zone-member security out
encapsulation ppp
dialer pool 1
dialer-group 3
ppp authentication chap pap callin
ppp chap hostname o2
ppp chap password 0 o2
ppp pap sent-username o2 password 0 o2
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip nat source list 101 interface Dialer2 overload
ip nat inside source static tcp 192.168.7.39 3500 interface Dialer2 3500
ip nat inside source list 101 interface Dialer2 overload
ip nat inside source route-map MAP_ACL interface Dialer2 overload
ip route 0.0.0.0 0.0.0.0 Dialer2 permanent
ip route 192.168.2.0 255.255.255.0 192.168.7.3 permanent
ip access-list extended NAT_ACL
deny ip 192.168.0.0 0.0.0.255 192.168.0.0 0.0.255.255
permit ip 192.168.0.0 0.0.0.255 any
ip access-list extended SDM_BOOTPC
remark CCP_ACL Category=0
permit udp any any eq bootpc
ip access-list extended SDM_GRE
remark CCP_ACL Category=1
permit gre any any
ip access-list extended SDM_HTTPS
remark CCP_ACL Category=1
permit tcp any any eq 443
ip access-list extended SDM_SHELL
remark CCP_ACL Category=1
permit tcp any any eq cmd
ip access-list extended SDM_SSH
remark CCP_ACL Category=1
permit tcp any any eq 22
ip access-list extended all
remark CCP_ACL Category=128
permit ip any any
ip access-list extended all1
remark CCP_ACL Category=128
permit ip any any
access-list 2 remark CCP_ACL Category=2
access-list 2 permit 192.168.7.0 0.0.0.255
access-list 101 remark CCP_ACL Category=128
access-list 101 permit ip any any
access-list 101 permit udp any any eq domain
access-list 101 permit udp any eq domain any
dialer-list 1 protocol ip permit
dialer-list 2 protocol ip permit
dialer-list 3 protocol ip permit
mac-address-table aging-time 15
route-map MAP_ACL permit 10
line con 0
no modem enable
line aux 0
line vty 0 4
exec-timeout 40 0
password xxxxxxx
transport input telnet ssh
transport output telnet ssh
scheduler allocate 60000 1000
end

Hi,
I would be happy to help but I have one question first: Your configuration contains a lot of cruft generated from SDM/CCP and I am not sure if any of that is really required by you. Do you believe you would be fine with having this entire configuration trimmed down and do just what's supposed to do (routing and NAT), and we had security measures added in later? Just by the way, I do not believe you need the zone-based firewall. In your simple setup with just a few inside/outside interfaces, it does not add any real value apart from making the configuration virtually unreadable. We can easily do the same with IP Inspect.
Best regards,
Peter

Print PO from ME23N

Hi all,
Can i print Purchase order from ME23N(dispaly mode)?
I know it is possible from ME22n.
Thanks and regards
shyam

hi,
I tried in print preview.
Option is available but it is greyed out.
Is there any other option available to print from ME23n?
regards,
shyam

Restricting of output of PO Documents from ME23N

Dear Team,
I want to bind users to use ME9F for outputting of PO documents as there are some archiving functions activated with ME9F.
But as of now my users used to take desired output from ME23N only.On print preview they used from menu :
Text->Print....
we want to disable this option for every SAP Login. .Canany body suggest what would be the authorization for doing the same
or any other way out to disable this...
Please suggest......
regards

Hi,
You have to make changes in the program with the help oABAPer. Please set the OPTIONS-TDNOPRINT as X, Where OPTIONS LIKE ITCPO. (Resembles structure ITCPO) . To execute this just go to TCODE SE37 and display FM OPEN_FORM. Go to Source Code and put a Break-point at the possible first line (I think it is CHECK CO_PERFORM-ACTIVE <> TRUE. ).
Now When you are trying to issue an ouput for your PO you will stop at this Break Point. Just check the value of OPTIONS-TDNOPRINT set to X. Thanking you.

Data extraction from Non-Unicode ECC6 to Unicode SAP BI system

Hi,
We have an existing non-unicode ECC6 system. Currently we are installing SAP BI unicode system. Can anyone tell me are there any issues in data extraction for SAP BI from a non-unicode ECC6 system to an Unicode SAP BI system ?
Please also note that our data consists of Asian (korean, Japanese & Chinese) fonts.
Regards,
Anirban

Hi Des Gallagher,
Thank you for your reply.
I have gone through the notes suggested by you, but they suggest issues related to BW 3.x versions. We are currently on SAP_BW 700 - SP16. Also, among other notes i found note 510882 which might be helpful for custom developments.
But i am still wondering whether we are going to face major issues related to data extraction from non-unicode ECC6 system to unicode SAP_BW 700 system.
Incase you have any further details, please let me know.
Thanks in advance.
Regards,
Anirban Kundu

Upgrade from 46c to ECC6.0 : Java or Java-AddIn ?

Hello
Can you explain me what is the difference between Java and Java-AddIn as proposed in evaluation phsae of an upgrade from 46c to ECC6.0?
Thank You.

Hi Alain,
But if we implement a JavaAddin solution today, do you think it will be possible to create a Java instance later to create a Portal solution ?
If you implement a java addin today then you can use later for portal solution.
Regards,
Anil

Moving/Transporting programs from 46c to ECC6

Guys,
For our upgrade we will start with a ECC6 system from scratch. The questions are - is there a tool to transport ABAP programs/functions from 46C to ECC6? Or in your experience it is better to manually do a download from 46C then manually upload to ECC6?
Thanks for your input.
Yan Guan.

Hi Yan,
If you are upgrading an existing 46C system to ECC 6.0 then the Z and Y programs in the system will be there even after your upgrade.
We will start with a brand new ECC system from scratch
means you are creating a system for the first time as ECC 6.0 ?. Then if there is transport path between your 46C sytem and ECC 6.0 sytem, you can transport the objects. Otherwise go for download/upload option. But I think creating a transport path is the better option.
Regards,
Soumya.

Upgrade From 46B to ECC6 SR3 - XPRAS_UPG errors

Hello,
I ugrade a system from 46B to ECC6 SR3.
Windows 2003 SP1 32bits / MSSQL 2000 SP4.
During the XPRAS_UPG phase, i have an error in the post-import method RS_SHIP_AFTER_IMPORT for the transport SAPK700ZH1.
The log is the RDDEXECL job log:
Job started
Step 001 started (program RDDEXECL, variant , user ID DDIC)
All DB buffers of application server xxx were synchronized
Incorrect input for activating transported shadow IPacks
Job cancelled after system exception ERROR_MESSAGE
Have you already encountered this problem?
Thanks,
Alexandre

The problem is solved.
It was due to an empty entry in table rsbasidoc.
Alex

Upgrade from ecc5 to ecc6 old data like PRD640_1 is still there

Dear All,
we have resent   upgrade from ecc5 to ecc6 and i have some quires regarding the datafile.
In sapdata1 -4 i see all old data like PRD640_1 i still there .Please suggest it is ok or it should not be there in the sapdata.
in db02 tablespace
PSAPEL701D
PSAPEL701I
PSAPPRD
PSAPPRD640
PSAPPRD701
PSAPPRDUSR
PSAPTEMP
PSAPUNDO
PSAPUNDO2
SYSAUX
SYSTEM
There is once more thing when i am extend the table from brtools for
BR*Tools main menu 2 - Space management 1 = Extend tablespace 3 ~ Tablespace name (tablespace) ... []
1 - BRSPACE profile (profile) ...... [initPRD.sap]
2 - Database user/password (user) .. [/]
3 ~ Tablespace name (tablespace) ... [PSAPPRDUSR]
4 - Confirmation mode (confirm) .... [yes]
5 - Scrolling line count (scroll) .. [20]
6 - Message language (language) .... [E]
7 - BRSPACE command line (command) . [-p initPRD.sap -s 20 -l E -f tsextend -t
PSAPPRDUSR]
c
c
Options for extension of tablespace PSAPPRDUSR (1. file)
1 * Last added file name (lastfile) ....... [L:\ORACLE\PRD\SAPDATA4\PRDUSR_4\PR
DUSR.DATA4]
2 * Last added file size in MB (lastsize) . [460]
3 - New file to be added (file) ........... [L:\oracle\PRD\sapdata4\prdusr_5\pr
dusr.data5]
4 # Raw disk / link target (rawlink) ...... []
5 - Size of the new file in MB (size) ..... [460]
6 - File autoextend mode (autoextend) ..... [yes]
7 - Maximum file size in MB (maxsize) ..... [500]
8 - File increment size in MB (incrsize) .. [20]
9 - SQL command (command) ................. [alter tablespace PSAPPRDUSR add da
tafile 'L:\oracle\PRD\sapdata4\prdusr_5\prdusr.data5' size 460M autoextend on ne
xt 20M maxsize 500M]
BR0259I Program execution will be continued...
BR1049W Not enough free space in L:\oracle\PRD\sapdata4\prdusr_5 for total maxim
um size of all database files of tablespace PSAPPRD located on this disk volume,
missing at least 741702.647 MB
BR1049W Not enough free space in L:\oracle\PRD\sapdata4\prdusr_5 for total maxim
um size of all database files of tablespace PSAPPRD640 located on this disk volu
me, missing at least 137942.647 MB
BR1049W Not enough free space in L:\oracle\PRD\sapdata4\prdusr_5 for total maxim
um size of all database files of tablespace PSAPPRDUSR located on this disk volu
me, missing at least 13522.647 MB
BR0668I Warnings or errors occurred - you can continue to ignore them or go back
to repeat the last action
Please suggest what is right configuration and how to sol ther error in brtools.
Regards,
Kumar

Hello Kumar9,
if I understoon correctly your last reply, you have doubts if PSAPPRD640 should exist at all, correct?
Please do the following:
1) Check any object assigned to this tablespace PSAPPRD640
2) If any object occupied to PSAPPRD640 then reorganise to new tablespace
If any object not occupied to PSAPPRD640 then check the table entry
   a)TAORA for tablespace PSAPPRD640(if exist delete)
   b)IAORA for tablespace PSAPPRD640(if exist delete)
3) If above done then drop the tablespace through BRTools.
Best regards,
Tomas Black

SAP extract to Excel changed after migration from ECC5 to ECC6

Hi everyone,
This issue is about getting a proper table when displaying SAP reports in Excel. When extracting to Excel, the data base is presented with summary yellow lines whereas we would rather have a regular table without subtotal. This issue appeared when the system was migrated from ECC5 to ECC6. Please notice that one of the user has currently a proper display. Do you know which parameter shall we change?
Thanks!
Stan B.

There are some default setting in the parameters,
Like
RPO0 - User Settings
From FI transactions you can change ti your default settings
Have a look to:
FIT_ALVC X FI Line Items: ALV Grid Control
With KSB1 I see it direct without sub totals and saving.
Click on spreatsheet
Select All Available formats
Select EXCEL (In Existing XXL Format)

The bpp from R3 to Ecc6, what is it like?

the bpp from R3 to Ecc6, what is it like? and generally, how many times for R3 Server's installation ?
what is it like？

Hi,
It depends upon your system landscape. If you have 3 system landscape then there would be 3 upgrade in the project. DEV,QAS & PRD.
Regards

Technical upgarde from ECC5 to ECC6 EHP4

Dear All,
We are having technical upgarde from ECC5 to ECC6 EHP4. I have have some queries as client what need to be check after upgarde.When golive cahke is done what are check list apar from system is up and running.
Please sugegst
Regards,
Kumar

SAP offers a pre-golive check before actual go-live by logging into your system and doing some important checks as per the requirement for technical or functional go-live check...
So, you want SAP to do pre-golive check, just open up the connection between SAP and your sap system, at the same time, a connection from Solman to SAP too..maintaining the connection details in secure area
You have to open a message in component XX-SER-TCC to find out if your installation is scheduled for a Go-Live check which is conducted by SAP and itu2019s partners.
Go-Live Functional Upgrade Analysis u2013 ideally 6 months before Golive u2013 basically checks your hardware requirement , will it be able to accommodate the increase in the functionalities caused by the Go-Live, also some parameter recommendations to fine-tune your system.
Go-Live Functional Upgrade Verification u2013 This is normally 2 months after the Go-live which is to see eu2019thing is fine after the upgrade.
Then you have normal Earlywatch session , each installation is entitled for 2 free earlywatch session in a year, in this performance tuning is done for your system, hardware,memory, I/0 bottlenecks are identified.
Reports of all these sessions carried out by SAP is then sent to you in form a MS-Word document and you can follow the guidelines mentioned and call up SAP or mail the person who has done the session for you for any clarifications.
Usually once a session is scheduled.
SAP will contact you to open the connections for them, so that they can prepare the system before the actual session takes place , in which they see , if SDCC version is good enough so that they can download the data from your system into their internal system on which they carry out the analysis
Refer to https://websmp208.sap-ag.de/earlywatch

Acces to cFolder from ME23N in ECC6

Similar Messages

Maybe you are looking for