Accesibility Issues with Image element

Hi All,
I've image element inside a table column. Image used is '~Icon/RedLed'.
Image source and tool tip are bound properly.
But we are facing an accessibility issue in this.
When accessibility mode is set to X, image tool tip reads as
'Image - Unavailable - Error Exist - Row 6 column Status'
where 'Error Exist' is the tooltip we are providing.
The problem is with 'Unavailable' word which is also coming up.
Also, Image is also rendered, so there is no issue like image path is not found therefore Unavailable word is comin.
Does anyone have any clue why this could be comnig up.
Regards
Manas

Hi Manas,
Check this blog to place image in your table.But the blog is to show image in ALV table, apply same logic.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1190424a-0801-0010-84b5-ef03fd2d33d9

Similar Messages

Issues with Images when used w/ Caption Widget & Book File Size Q

Hi Everyone,
I was having issues with images not showing up and determined it was the caption widget causing the issue. I now have one of two issues happening consistently. Either the image does not show at all or just the caption box with bkgd gray and caption text shows, but without the image.
Anyone else have this issue?
Ay ideas would be greatly appreciated. I wasw just about finished with this project when this started!
Also, the size of the book is considerably larger than I realized.It is 81 mb. . . How does this compare to any of your books?
THANKS SO MUCH!
Belinda

Belinda,
I can't speak to your main issue, as I cannot recreate the problem over here.
As a guess, have you checked to make sure you're not running out of harddrive space? iBA can consume space quickly, and behaves oddly when it begins to run out of room.
But as far as filesize goes, I can only wish for an 81 MB book. Mine is currently a little over 2 GB and growing. Tonight I had to split it into 2 volumes just so iBooks Author can run at a reasonable pace. I was getting tired of waiting 1-2 minutes after dragging a video around on the page before I could get control of the program again.
You should note that Apple is expecting large filesizes for this new Multi-Touch format. The docs on iTunesConnect say the largest allowed upload size for a book is 16GB 2BG (see link below)
Message was edited by: mudmas

Issue with images in different browsers

Having an issue with different browsers -- hoped someone
could help.
If I open my site with IE, everything looks as it does in
Dreamweaver -- there is no overlap of text and images/etc.
If I open my site with Mozilla or Safari, it seems to
arbitrarily move up some of the images over the top of text. Not
all of the images, mind you -- just a few random ones throughout
the page.
Opening the following link in both type of browsers may give
you a clue as to what is going on. What can I do to get it to look
like it does in IE?
http://www.centecsystems.com/centecexample/disanapplications.htm

LOL ahem, 'scuze me. :-)
-N
"Walt F. Schaefer" <[email protected]> wrote in
message
news:[email protected]...
> >>For that we rely on IE hacks
>
> In polite company we call those "conditional comments".
> --
>
> Walt
>
>
> "Nancy O" <[email protected]> wrote in
message
> news:[email protected]...
> > First off, you are assuming incorrectly that IE is
the good browser and
> > Mozilla is the bad browser. Actually, it's the
other way around. If
you
> > build your sites to perform well in Mozilla,
chances are your sites will
> > look good in all major browsers except IE. For that
we rely on IE hacks
> > or
> > workarounds.
> >
> > Learning html and CSS takes time and effort but
it's very doable. You
> > would
> > be doing yourself a big favor by learning to work
with code now. Design
> > view is fine for some things, like typing content
and adding a few
images.
> > But eventually you have to pop the hood to check
the oil. If hiring a
pro
> > isn't an option, I suggest you purchase a solid
template to work with.
> > Money well-spent IMHO.
> >
http://www.projectseven.com/products/templates/
> >
> >
> >
> > --Nancy O.
> > Alt-Web Design & Publishing
> > www.alt-web.com
> >
> >
> >
> >
> > "PunIntended" <[email protected]>
wrote in message
> > news:[email protected]...
> >> Unfortunately, hiring someone is not an option
for my friend -- the
> > recession
> >> has hit them hard -- etc.etc. I'm doing it as a
favor.
> >>
> >> One additional question -- Why are only some of
the image files moved
> > when
> >> viewing in mozilla? I dont understand how
Dreamweaver arbitrarily
> >> chooses
> >> which are moved and which are not.
> >>
> >> Also, is laying out your site in 'design' mode
simply a bad idea? It
> > seems
> >> like it looks / works fine with IE, and the
majority of the layers are
> > correct
> >> in mozilla -- it just doesn't deal well with a
few of the images.
> >>
> >> Thank you again for all your comments - - like
I said, am sort of a
> > beginner
> >> -- just looking for the best method to fix the
problem. If the best
> > method is
> >> explaing to the graphic designers their
'vision' can't be accomplished,
> >> so
> > be
> >> it. I just want to know how to go about
attacking the browser
> > compatibility.
> >>
> >
> >
>
>

Issues with images in Portfolio (Acrobat X Pro)

Hi all,
I am having an issue with my portfolio file in Acrobat X Pro. I insert images from my hard drive, then proceed to give them display names and tags. This works fine, but then the next time I open the file, some of the pictures have become broken links. For those, the filename has been changed to the same as display name, even though I did not make that change. Once this happens, I seem to be left with no other choice than to reinsert the image and retag it and hope it doesn't happen again.
Has anyone else run into this issue? Is there a way to prevent this from happening? Thanks.
- Adam

Java is a different animal than JavaScript.
PDFs use JavaScript and not the Java programing language.
As mentioned the apps on the iPxd, iPhone and android devices do not show the bookmark panel. The user needs to open the option that looks like an outline and the bookmarks appear like a table of contents for a book.
The show pages and bookmarks only works for full computer, laptops, and netbooks with the Acrobat or Reader programs or similar programs, not apps for tablets and phones.
Do you have a smart phone or tablet to test your PDFs on?

Issues with Photoshop Elements 12

I am already using Photoshop CS6 and was informed that I can also purchase and install Photoshop Elements 12 on the same PC (Windows 7).
This I have now done but after some installation issues I am now experiencing a problem with the camera raw part of Elements. I am receiving an error message when I try and send the edited raw file to the main Elements program. The strange part is that if I open the same raw file again in Elements camera raw and try transfering again it works OK. Can there be a conflict somewhere?

Hi,
Could you tell if you are facing this issue with Elements Organizer or Editor?
For Editor not launching,
If on Windows, could you follow the steps shared at: Photoshop Elements (PSE) knowledge base.
For MAC, Photoshop Elements (PSE) knowledge base.
For Organizer not launching,
For Windows, Photoshop Elements (PSE) knowledge base.
For MAC, Photoshop Elements (PSE) knowledge base.
Regards,
vaishali

Issues with iFrame elements in Illustrator

Currently I'm having issues with adding an iFrame element to an extension run in Illustrator.
I'm using Eclipse 4.3 to run extension build 3, release 3. I've created the basic project, and I get the extension to function correctly when there's just the basic button. Further I can make changes to the button (change the text) and it continues to work.
However, when I add an iFrame element to the extension it seems to crash. The extension window opens and then immediately closes. There are no error messages from Illustrator, nor are there any errors in any log files from adobe/illustrator.
Here is the line I'm attempting to add to the basic starter application in the index.html file:
<iframe src="http://localhost:8080/tests/testfixture/" width="150" height="150"></iframe>
Also I can manually load index.html file and it works correctly when opened by Chrome.
I am using Illustrator CC 17.1.0 32/64 bit.

Currently I'm having issues with adding an iFrame element to an extension run in Illustrator.
I'm using Eclipse 4.3 to run extension build 3, release 3. I've created the basic project, and I get the extension to function correctly when there's just the basic button. Further I can make changes to the button (change the text) and it continues to work.
However, when I add an iFrame element to the extension it seems to crash. The extension window opens and then immediately closes. There are no error messages from Illustrator, nor are there any errors in any log files from adobe/illustrator.
Here is the line I'm attempting to add to the basic starter application in the index.html file:
<iframe src="http://localhost:8080/tests/testfixture/" width="150" height="150"></iframe>
Also I can manually load index.html file and it works correctly when opened by Chrome.
I am using Illustrator CC 17.1.0 32/64 bit.

Aperture 2.1.4 issue with Image preview (Browser Only)

Hi,
I'm using Aperture from some time, from past few days I'm facing issue with my aperture image browser only.
i have few projects created. In some projects I'm unable to see the images in view browser only mode. If I select some other view option it works fine except view Browser only has issue.
any idea how can i fix it.
Thanks,
Gulab Pasha

thanks for your reply,
I can see the blanks dashes square instead of thumbnails. and it affected to all the images in a project.
(In one of the other modes, you could select all the images (or just the ones affected) and reprocess the thumbnails). how would i do this...
Thanks,
Gulab Pasha

Having issues with ps elements 5

I am running windows 7 64 bit with IE 9 and i'm having issues with the PS Elements 5 Organizer. Could it possibly be IE 9?

Absolutely not.
Ken

Issues with Images

Hi,
Im quiet new to j2me, doing a project in it for college
I`m having awful trouble with images i have this code but it doesn`t work:
(inside the class)
Image Image1;
(inside a function)
try { Image1=Image.createImage("/logo_PNG.png");
catch(Exception e)
message="error";
The program runs but never displays the iimage, the picture just never goes into Image1.
Using the debug mode in JBuilder I get: Image1: javax.microedition.lcdui.Image = null

Got it, it was the folders that it was in that was wrong.

Issue with Image upload in DAM (changes the size)

Hi,
We are seeing issues with some of the .jpeg files dimensions getting chnaged when uploaded into CQ5.4. For e.g. I have an W-Training-Shoes-hotspot-1b-140x140.2.jpeg of140x140 dimension. When I upload it in CQ it saves with width=1600 & height=140. Did anybody saw this issue before?
If I copy the original file & resave it with 140x140 size & reload in CQ, it will load fine with width=140 & height=140.

It looks like the assets has wrong metadata. As a workaround add a process step right after "Metadata extraction" to the update asset workflow and have a script updates with correct dimensions.

Action batch export issue with image trace

So, currently I'm working on batch processing jpeg sequences using illustrator's image trace and distortion effects. I have batch exported the image traces of the sequences via Adobe bridge. Now I'm trying to create an action which opens the .ai files containing those image traces, apply a graphic style to the trace, and export a png from that. I'm banging my head against the wall trying to get this to work right now. If I do the steps (step by step... not using a recorded action) I want on a single file, it works great, but the moment I batch export using the action I've created, it puts the original .png image that the image trace was linked to, on top of the image. The result is a bunch of .png exports that look exactly like my original image sequence. If I add a "save" function to the action and open the resulting .ai files, I can see that the image trace vectors are in the file. The "linked png" however visible on the layer above those vectors. Anyone have any idea what I'm doing wrong? How do I get rid of that pesky linked image.
Also, for anyone who might be thinking that it has something to do with expanding the image trace before applying effects, this issue I'm running into, I've determined, is happening higher up in the hierarchy of the actions... If I simply make an action to open the image trace illustrator file and save it back out, the same issue occurs... placing the .png "linked file" on top of the vector image.
While I'm at it, I might as well ask if anyone knows how to change the illustrator default image trace preset.... Without being able to change it, or much less specify in the action sequence that I'd like to use a user created image trace preset rather than the default setting, it's greatly overcomplicating my workflow. Makes what could easily be one-step batch processing into two. Seems pretty silly if you ask me.
Please, if you guys have any insights on this, let me know. It's super frustrating... By the way, if you're wondering what type of effect I'm going for, the idea (as well as some explanation into their own process) starts at 12:44 of this video (http://vimeo.com/77427470).
THANKS!

Just wanted to let you guys know, for anyone who might be having my same issue... My home computer, even after a fresh install of Illustrator, was still placing the linked jpeg over the traced vector shapes when batch exporting... I did however find a workaround. Rather than using Bridge CS6 for the batch image tracing, I used Bridge CS5 to trace in Illustrator CS5. Then, I used Illustrator CS6 to batch export an action that imported and applied an effect to those image traced sequences. When you do this, it forces you to expand the tracing on import (because of the difference in Illustrator versions I'm assuming). This way, when you batch run the action, it's already working with expanded vector shapes. Not sure why this works, but it does.
Also, I was having some issues getting Illustrator to apply the graphic style when batch exporting. I got it to work by copying an object with that particular graphic style to the clipboard, then adding in the action I was running a "paste" command, followed by a "clear" command. I can only assume that Illustrator was having issues loading custom graphics styles while batch exporting. The paste/delete technique is annoying, but gets it done.
Anyways. Just wanted to check in on this one. I'm happy I was able to muscle my way through it all.

Issues with images in Yosemite (Can't load images correctly)

I have been experiencing a weird behavior in Yosemite (10.10.1), related to opening images of any kind in most of my programs in my MacBook pro 15" (Late 2011). Images would not load correctly, showing a bizarre pattern of black stripes (example image attached). This is happening in Mail, Preview, Firefox, Safari; pretty much in all kinds of software that is able to open images (except photoshop, illustrator and iPhoto that I tested as well). Even with jpg, png, tiff, or pdf images. If I copy the image and paste it in Pages or other software, then the picture is revealed correctly. It seems to be stochastic, as some pictures will open correctly while others don't.
Just as a comment, the only different thing I did before this issue was to install iPhoto (Version 9.6).
Thanks in advance.

Hi Bett,
I don't know where else you have looked for help, but these links may be useful.
http://support.apple.com/kb/HT4168 "Creating ePub files with Pages"
which has a link to:
https://discussions.apple.com/article/HT4168#
which is an Apple Support Community "Creating ePub files with Pages".
Regards, Ian.

Issues with Premiere Elements 8...

Just purchased and installed elements 8 on my rather old pc (like 5 years) which I've been upgrading constantly to avoid having to buy a new one. Everything seems to work fine, there's some slight lags when rendering clips etc, but the main issue is when I try to use to use the time stretch tool. I'm just trying to compress a 20 or so minute long shot into 15 seconds, and every time I do, it will render the shot and then crash eventually, without playing it. Can anyone help me with this really annoying problem and maybe give me some advice as to how I can maybe get a better performance from the software?
I'm running XP sp2 (I just factory reset so I'm still updating for sp3)
Nvidia Geforce 8400 gs
3gb ram
pentium 5 2.66GHz

Well, I see two instant issues: lack of defragmented free space, plus the bottleneck of partitions. This ARTICLE will give you some background on partitions, especially for video-editing.
Next, what is the connection type for the external? If USB, then there could well be issues there, as the computer can encounter read/write errors, as the programs will shove material, and ask for more, much faster than that connection type can provide. USB externals are fine for archiving, but can be very problematic, when trying to edit to/from. I use FW-800's with no issues, but eSATA would be even better.
Do you have a laptop (probably mentioned above)? If so, can you use a PCMCIA, or ExpressCard to go to eSATA externals?
If a desktop, I would certainly look at adding at least one additional internal HDD. Not sure where you are located, but Fry's (Western US retailer) just had WD 1.5TB SATA internals, with full installation kit for US $149, and if one uses say ATA-300's, they had a 2TB WD for US$89.
Good luck,
Hunt
[Edit] Just noticed "PAL," so forget Fry's, unless they have opened some UK/Euro stores - sorry about that.

Permissions issue with image resize

Ok I'm hoping someone may be able to help with this because it is really frustrating.
I realise this issue has already been posted in these forums however there was no solution offered that has rectified it for me. I am getting an error when trying to display thumbnails "Error converting image (create thumbnail). The "" folder has no write permissions". And this error when trying to upload and resize images "Image upload error. Error resizing image: Error converting image (image resize). The "" folder has no write permissions. (IMG_RESIZE)". All folders on server have full read, write and execute permissions, so I am really confused why this happenning. I have removed and updated the includes folder on the server with no joy. I altered the tNG_custom.class.php, tNG_insert.class.php, tNG_update.class.php files to remove the tNG_fields line to just tNG as this was throwing errors with PHP5.3. I also changed everything else per http://forums.adobe.com/message/2357443#2357443.
This is the tNG execution trace (why the tNGUNKNOWN??):-
tNGUNKNOWN.executeTransaction
STARTER.Trigger_Default_Starter
tNGUNKNOWN.doTransaction
BEFORE.Trigger_Default_FormValidation
BEFORE.Trigger_CheckForbiddenWords
tNG_insert.prepareSQL
tNGUNKNOWN.executeTransaction - execute sql
tNG_insert.postExecuteSql
AFTER.Trigger_ImageUploadtNGUNKNOWN.afterUpdateField - DefaultPic, P8280176.JPG*
ERROR.Trigger_LinkTransactionstNGUNKNOWN.doTransaction
tNGUNKNOWN.executeTransaction
tNGUNKNOWN.getRecordset
tNGUNKNOWN.getFakeRsArr
tNG_insert.getLocalRecordset
tNGUNKNOWN.getFakeRecordset
tNGUNKNOWN.getFakeRecordset
tNGUNKNOWN.getRecordset
tNGUNKNOWN.getFakeRsArr
tNG_insert.getLocalRecordset
tNGUNKNOWN.getFakeRecordset
tNGUNKNOWN.getFakeRecordset
And is causing the following php warnings when executed:-
Warning: Parameter 2 to Trigger_Default_FormValidation() expected to be a reference, value given /testing/includes/tng/tNG.class.php on line 228 Warning: preg_split(): No ending matching delimiter ']' found in /testing/includes/common/lib/image/KT_Image.class.php on line 2034 Warning: array_pop() expects parameter 1 to be array, boolean given in /testing/includes/common/lib/image/KT_Image.class.php on line 2035 Warning: implode(): Invalid arguments passed in /testing/includes/common/lib/image/KT_Image.class.php on line 203
Is it the preg_split() that is causing the issues here??
Any Ideas?

Hello BoarderLineLtd
I have noticed that on some servers when you upload the first image to the images folder using the ADDT image upload function the thumbnail directory that gets written to the images directory is written but the permissions are not set.
If you use an FTP program such as CuteFTP or WSFTP to login to your web site you can manually set the permissions for the thumbnail directory.
This should eliminate the permissions error.
Stan Forrest
Senior Web Developer
Digital Magic Show

OLM || Issue with Image-type questions

Hi
This is with reference to an issue regarding the import of " Image-map " types questions in OLM.
The legacy system which the client uses allows creation and assignment of 'Image-map" types questions to the learners.
As far as my limited understanding goes, these types of questions are not supported in OLM.
How to handle such types of questions in OLM , any pointers ??
Also , what exactly are QTI standards and how to convert the existing question banks to QTI standards and then import them to OLM ??
Thanks in advance for your time..
Cheers

There is one method to support these types of questions by using HTML code in the question text, but it is definitely a workaround.
1. Use an HTML editor like Dreamweaver to create the image map or other type of interactive question. Save the html and any related images, javascript etc and upload to a content server. If the user gets the interactive question correct, provide them with some code to enter that will be used later.
2. Select a question type like fill in the blank
3. In the question text, use an IFRAME to embed the HTML page that contains the interactive question
4. The correct response for this question will be based on the "code" you provide users in the interactive question if they get it correct. They would then enter this code in the fill in the blank area and get credit for answering correctly.
Other options include building the assessment using a content authoring tool and offering the assessment as a SCORM or AICC learning object, or integrating with a third party assessment tool such as Questionmark.
Also,
Metalink Note ID #295865.1 contains the import/export API tech specification (this was originally written for Oracle iLearning but applies to OLM for the most part as well) and has info on the QTI spec that OLM and iLearning support.
Scott
http://www.seertechsolutions.com
Message was edited by:
scottymomo

Accesibility Issues with Image element

Similar Messages

Maybe you are looking for