Accesing the OS at the DOS level

Is Flex suited to creating an app that can access and
initiate commands at the DOS level in a Windows environment? I'm
relatively new to Flex and wonder if I could create a network
analyzer that could perform these types of routines. This is more
of a "can I do it" question. Does anyone on the forum have
experiece doing this? I know there are plenty of free NA apps out
there but it would be sweet if I could develp my own just to say I
did. Thanks.

"brettcristofer" <[email protected]> wrote
in message
news:gmir3j$ik4$[email protected]..
> Is Flex suited to creating an app that can access and
initiate commands at
> the
> DOS level in a Windows environment? I'm relatively new
to Flex and wonder
> if I
> could create a network analyzer that could perform these
types of
> routines.
> This is more of a "can I do it" question. Does anyone on
the forum have
> experiece doing this? I know there are plenty of free NA
apps out there
> but it
> would be sweet if I could develp my own just to say I
did. Thanks.
No, flex is not suited to this. You could probably get an AIR
app to do
this by using Merapi, but don't expect it to be anything like
easy.

Similar Messages

How to generate a Yearly report based on a calculation at the Month level

Have the need to create a report as follows. Any ideas on how this can be accomplished in OBI is appreciated. I have already tried different ways but non worked for me.
The data is stored in a table at day level as follows:
Day Amount_A Amouont_B
1/1/2008     100     100
1/15/2008     200     100
2/1/2008     100     400
2/15/2008     300     200
1/1/2009     100     300
1/15/2009     100     200
2/1/2009     200     100
2/15/2009     400     300
The report should be displayed at Year level. Amount_A is just the summation of Amount_A from the table at daily level rolled up to the Year level in the Time dimension. The same thing for Amount_B.
The formula for Absolute_Error is Absolute(Amount_A - Amount_B). But the problem is that it has to be calculated at the Month level instead of Day Level. So following is the logic for Absolute_Error:
Month     Amount_A Amount_B     Absolute_Error
Jan-2008     300     200     100
Feb-2008     400     600     200
Jan-2009     200     500     300
Feb-2009     600     400     200
The report should be displayed as follows:
Year Amount_A Amount_B     Absolute_Error
2008     700     800     300
2009     800     900     500
Note that the calculation of Absolute_Error results in a different value if it is calculated at the Month level and summed up to Year than if it were calculated at the Day level and then summed up to Year. It is required to be based on Month level for this report.
Is there a way to do this without having to build an aggregated fact table at the Month level?

Hi.
Do this:
1. Create Amount_A and Amount_B in BMM without SUM as default aggregation rule.
2. Now, just go to Answers and make report with three columns:
YEAR -- EXPRESSION 1 -- EXPRESSION 2
EXPRESSION 1 is:
sum(Amount_A) - sum(Amount_B)
EXPRESSION 2 is:
sum
abs
sum(Amount_A by MONTH)
sum(Amount_B by MONTH)
My example in Answers:
TIMES.CALENDAR_YEAR
sum(SALES.QUANTITY_SOLD_NORMAL) - sum(SALES.AMOUNT_SOLD_NORMAL)
sum( abs(sum(SALES.QUANTITY_SOLD_NORMAL by TIMES.CALENDAR_MONTH_DESC) - sum(SALES.AMOUNT_SOLD_NORMAL by TIMES.CALENDAR_MONTH_DESC) ) )
This will first summarize amount A and amount B on a month level and then do a difference, after that ABS and then sum on the year level.
This is workaround to avoid larger RPD changes.
Regards,
Goran O
http://108obiee.blogspot.com/

Free Goods not getting Determined at the Order Level

Dear All,
I have activated free goods settings and also maintained free goods master record for exclusive free goods.However when I am entering the main line item the second line item in the sales order which should contain the free qty is not coming,please advice what needs to be done.
Kind Regards
Atul

Hi Jelena,
Thanks for your post with this I could find out what was happening.The following is the analysis once I switched on the free goods determination at the order level and below was the system response.
Diagnosis
     There are certain business transactions where it is not possible to
     determine free goods in the SAP standard system: reason 3
     Explanation of reasons
     1      Document category is not from sales order category (VBTYP <> 'C'
     2      Lower-level item
     3      Bill of material
     4      Product selection
     5      Configurable item
     6      Scheduling agreement/forecast delivery schedule
     7      Item with active ingredient management
     8      Item without schedule lines
I had found that in my item category the structure scope was marked as A where it was exploding the single level bill of material.Once this configuration was turned blank which is no explosion the free goods were getting determined.
Kind Regards
Atul

Exit/bAdI for changing the item level field in VA02.

Dear Guruss...
I am facing a problem while trying toi change the account assignment group in VA02. The field is present at the iteem level in the tab BILLING.
When I change the field by choosing one of the values provided in the search help and enter, the value is again reset to its initial value. However if I change the value and SAVE (without pressing enter) then the value is saved.
The technical field name is VBAP-KTGRM, I have checked in the include:MV45AFZZ by putting break-points at all the forms but unfortunately none of them is getting triggered when I press enter.
During the debugging I found tha the values of the structure VBAP are overwritten by those of XVBAP everytime I press enter.
I also checked for the bAdI but can not get any help.
Is there any bAdI or exit that can help me for this????
Thanks in Advance......
Abhi.....

Hi Digvijay
   these are some of the enhancements/badi's which is related to t-code va02. just check it out
Transaction Code -               VA02          Change Sales Order
     Enhancement/ Business Add-in               Description
     Enhancement
     V60F0001               SD Billing plan (customer enhancement) diff. to billing plan
     V46H0001               SD Customer functions for resource-related billing
     V45W0001               SD Service Management: Forward Contract Data to Item
     V45S0004               Effectivity type in sales order
     V45S0003               MRP-relevance for incomplete configuration
     V45S0001               Update sales document from configuration
     V45P0001               SD customer function for cross-company code sales
     V45L0001               SD component supplier processing (customer enhancements)
     V45E0002               Data transfer in procurement elements (PRreq., assembly)
     V45E0001               Update the purchase order from the sales order
     V45A0004               Copy packing proposal
     V45A0003               Collector for customer function modulpool MV45A
     V45A0002               Predefine sold-to party in sales document
     V45A0001               Determine alternative materials for product selection
     SDTRM001               Reschedule schedule lines without a new ATP check
     SDAPO001               Activating Sourcing Subitem Quantity Propagation
      Business Add-in
     BADI_SD_SCH_GETWAGFZ               Scheduling Agreement: Read WAGFZ from S073
     BADI_SD_V46H0001               SD Customer functions for resource-related billing
Regards
Zulfikhar ali
Edited by: Zulfikhar Ali Bhutto.N on Sep 23, 2011 11:15 AM

OBIEE 11g - No fact table exists at the requested level of detail

My dimesion tables are snow-flake.
Table1 has Key, ProductName, ProductSize, Table2Key
Table2 has Key, ProductDepartment, Table3Key
Table3 has Key, ProductDivision
I have created 2 hierarchies (in same dimension Product). Note: ProductSize is in Table1.
ProductDivision > ProductDepartment > ProductName (shared level)
ProductSize > ProductName (shared level)
There are 2 fact tables
Fact1 is at ProductName level
Fact2 is at ProductDepartment level
When I create a request with columns as ProductSize and some measure; and filter it on ProductDepartment. The request fails with error "No fact table exists at the requested level of detail", but the request can ideally be answered using fact with ProductName level.
I have properly defined logical level keys in the hierarchies and logical level in the LTS (content tab)
Can anyone point me what I am doing wrong here?

Since both fact tables are at same granular level I would suggest to map each other (Signon_A maping Signon_B) in BMM layer logical fact @source.
Considering them as Fact and with fact extension.
BTW: Did you try by setting implicit fact at subject area properties?
Edited by: Srini VEERAVALLI on Feb 1, 2013 9:04 AM

Unable to get the composite instance for the invocation. This could be because instance has not yet been created or because the audit level for the SOA infra has been set to Off

I am on Oracle 11.1.1.7 BPM suite on W8 64 bit. I can't launch the flow trace and get the error "Unable to get the composite instance for the invocation. This could be because instance has not yet been created or because the audit level for the SOA infra has been set to Off". I have set the audit level to development at the soa-infra>SOA Administration> Common Properties > Audit level set to development and Capture Composite Instance State is Checked.
Can somebody advice.
Thanks

Can you please confirm me the following steps...
Log in to the EM console, Expand soa-infra (soa_server1) , go to the partition where your composite is been deployed, Click on your composite, On the right, click on the dropdown Settings and choose Composite Audit Level. you can choose to set the Audit Level for this composite. If you choose Inherit, it will take the settings to what the server is being set to. Otherwise, we can override it by choosing Off, Production, or Development.
Make sure your setting for that composite is not Off, keep inherit or production or development.
Thanks,
N

I want to be able to totally block the FaceTime functionality in my home network. I would like to do this at the router level. Does anyone know the hostname or IP address that the FaceTime application uses? Or which port it connects to?

I want to be able to totally block the FaceTime functionality in my home network so my 4 kids aren't using the Facetime feature- It was easy for Skype just had to enter the work Skype on my Router Security list- and it denies access. I would like to do this at the router level for FaceTime? Only site I find in init.ess.apple.com - is this the startup site for Facetime? Does anyone know a site I can block, hostname or IP address that the FaceTime application uses? Or which port it connects to?

I would presume so, but it might be worth your while to experiment and play around with different combinations to see if you can block FaceTime while keeping Game Center open. Good luck!

Is there a way to "mix" the nodes and leaves of the tree so if they are at the same level, they will display in a specified order.

Is there a way to "mix" the nodes and leaves of the tree so that even if they are at the same level (1,2,3...), they will display in a specified order (via sort sequence, alphabetical, etc.).
History:
We are using the Tree UI element to display/manage a material bom interface. We seem to be running into an issue with displaying the nodes/leaves of the tree.. regardless of the order that the context is built (which is currently the order of the exploded BOM from from CS_BOM_EXPL_MAT_V2), the bom is displayed with the nested boms at the top of each level and the single materials below them. For example. If TK1 contains Material1, Material2, Material3, Kit1(containing component1, comp2, comp3), Material4, Kit2(containing comp4, comp5, comp6), and Material5 (in this order), the tree will display with the A level node as TK1, the next node as Kit1 (with its subleaves of comp1,comp2,comp3), Kit2(with subleaves of comp4,comp5,comp6), THEN Material1, material2, material3, material4, material5. Our users are adamant about the items displaying in the correct order (which should be alphabetical based on the description for one report and by location for purposes of inventory for another). I've searched but not been able to locate a similar question. If I've missed it, please point me in the right direction. The users want the tree, not a "tree" table. This is our first attempt at the tree, so maybe we're missing something basic?
TK1
-Mat1
-Mat2
-Mat3
-Kit1
--Comp1
--Comp2
--Comp3
-Mat4
-Kit2
--Comp4
--comp5
--comp6
-Material5
displays as
TK1
-Kit1
--Comp1
--Comp2
--Comp3
-Kit2
--Comp4
--Comp5
--Comp6
-Mat1
-Mat2
-Mat3
-Mat4
-Mat5

co-workers said example picture is misleading.. we can make the order work if everything is a "folder" but not a mix of "folders" and "files" (if making a visual reference to the windows browser). i.e - a file is represented as an empty folder.
TK1
. Mat1
. Mat2
. mat3
> kit1
.. comp1
.. comp2
.. comp3
. mat4
> kit2
.. comp4
.. comp5
.. comp6
. mat5
displays at
TK1
> kit1
.. comp1
.. comp2
.. comp3
> kit2
.. comp4
.. comp5
.. comp6
. mat1
. mat2
. mat3
. mat4
. mat5
we can make it work if everything is a folder. This is our current workaround.
TK1
> mat1
> mat2
> mat3
v kit1 (when expanded)
.. comp1
.. comp2
.. comp3
> mat4
> kit2 (when not expanded)
> mat5

In the report level user wants two persons against each work center.

Hi Experts,
Please let me know the solution, I have provided scenario below.
check the query which the user is referring to report:
Example
Work center     Person
KNE33102     44003850
According to the user, the names for the Work centers should be as follows:
Work center          Person
KNE33102         44003850,
KNE33102        44003603
I have check the data in T-code-CR03, each work center getting two persons, as can be shown below.
Work center        Person
KNE33102           44003850,
KNE33102           44003603
In RSA3 it can be seen that both the records are being extracted
Work center     Start date     End date     Person
KNE33102     09.02.2009     31.12.2009     44003850
KNE33102     09.02.2009     31.12.2009     44003603
In BI , when checking in PSA, it can be seen that the data is also being loaded to BI (Two persons loaded against Work center-KNE33102)
Work center     Start date     End date     Person
KNE33102     09.02.2009     31.12.2009     44003850
KNE33102     09.02.2009     31.12.2009     44003603
But when loading to the Info Object, one person has deleted. Because of this, in the report level displaying one person.
Note:-Please let me know what is the procedure, in the report level user wants two persons against each work center.

Hi,
As you said in your post the data has mentioned up to 2009. can you try execute the query till to date .
Regards
sivaraju

Changing the Dunning level and reports for Dunning

How can I change the 'Dunning level' for line items in the 'Dunning History/Dunning overview'? I have read in help.sap that I can change it, but am not able to find where I could do that.
link: http://help.sap.com/erp2005_ehp_03/helpdata/EN/bc/2127c4265911d286d6006008bbc8e8/frameset.htm (In 3rd para).
Can anyone tell me if there are any reports available to view the 'Dunning list'(other than Dunning History in F150).
Also, Our client needs a report which shows a list of all 'customers' and 'line items' Blocked for Dunning.
Please give me your suggestions ASAP.
Thanks
Edited by: sapfan 20062007 on May 3, 2008 10:39 PM

Thanks .
I'm looking at running the ALFS editor . I'm in WebAS 7.00 . The Themes/templates and brand colours on the left frame does appear but the bsp page does not appear . used the standard bsp page which appears as a default ( bsp add it05 ) . The error message is as follows
The following error text was processed in the system:
BSP Exception: Das Objekt entrypoint.htm_sap-themeRoot=/sap/public/bc/ur/design2002/themes/alfs1000101F5FFFA2F4F4F2929296F8FAF3F5F7F in der URL /sap/bc/bsp/sap/it05/entrypoint.htm&sap-themeRoot=%2fsap%2fpublic%2fbc%2fur%2fdesign2002%2fthemes%2falfs1000101F5FFFA2F4F4F2929296F8FAF3F5F7F ist nicht gültig.
But if I run the bsp application manually then the right theme does get picked up . I made the entry in the bspthemeroot table and put in the alfs parameter in the above url ( 1000101F5FFFA2F4F4F2929296F8FAF3F5F7F ) . The bsp application works fine but not the alfs editor . Any ideas ?

How to do the reversal in the item level of a (delivery)document?

hi friends,
Is there any way to put reversal, at the item level for the document already posted ?
Do we have any standard funtion module or BAPI to pass value from the editor ?
My task is, I want to do the reversal in the item level of the (delivery)document.
I tried with the BAPI - BAPI_ACC_GL_POSTING_REV_POST, but this is reversing the whole document. but I want to reverse in line item only.
please suggest me.....
Quick replies would be rewarded.
Thanks in advance.
Regards

Hi Rob,
yes, what you told is right. I want to do the same. I will first reverse the particular line item and will post the correct entry. but here, I need to do that for a huge number of document. It will be good if I pass the values using a funtion module or a BAPI to reverse. So, I want a Funtion Module or BAPI to process it.
anyway, after reversing the document, I am going to post the document with correct entry.

Report Designer error i VS 2013 - "Data at the root level is invalid."

Hi,
I am trying to create rdlc file programmatically. Using Memory Table as dataset. Here is my code
' For each field in the resultset, add the name to an array listDim m_fields AsArrayList
  m_fields = NewArrayList()
  Dim i AsIntegerFor i = 0 To tbdataset.Tables(0).Columns.Count - 1
      m_fields.Add(tbdataset.Tables(0).Columns(i).ColumnName.ToString)
  Next i
  'Create Report 'http://schemas.microsoft.com/sqlserver/reporting/2008/01/reportdefinition'http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition' Open a new RDL file stream for writingDim stream AsFileStream
  stream = File.OpenWrite("D:\MyTestReport2.rdlc")
  Dim writer AsNewXmlTextWriter(stream, Encoding.UTF8)
  ' Causes child elements to be indented
  writer.Formatting = Formatting.Indented
  ' Report element
  writer.WriteProcessingInstruction("xml", "version=""1.0"" encoding=""utf-8""")
  writer.WriteStartElement("Report")
  writer.WriteAttributeString("xmlns", Nothing, "http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition")
  writer.WriteAttributeString("xmlns:rd", "http://schemas.microsoft.com/SQLServer/reporting/reportdesigner")
  writer.WriteStartElement("ReportSections")
  writer.WriteStartElement("ReportSection")
  writer.WriteElementString("Width", "11in")
  writer.WriteStartElement("Body")
  writer.WriteElementString("Height", "5in")
  writer.WriteStartElement("ReportItems")
  writer.WriteStartElement("Tablix")
  writer.WriteAttributeString("Name", Nothing, "Tablix1")
  writer.WriteElementString("Top", ".5in")
  writer.WriteElementString("Left", ".5in")
  writer.WriteElementString("Height", ".5in")
  writer.WriteElementString("Width", (m_fields.Count * 1.5).ToString() + "in")
  writer.WriteStartElement("TablixBody")
  ' Tablix Columns
  writer.WriteStartElement("TablixColumns")
  ForEach fieldName In m_fields
      writer.WriteStartElement("TablixColumn")
      writer.WriteElementString("Width", "1.5in")
      writer.WriteEndElement() ' TableColumnNext fieldName
  writer.WriteEndElement() ' TablixColumns' Header Row
  writer.WriteStartElement("TablixRows")
  writer.WriteStartElement("TablixRow")
  writer.WriteElementString("Height", ".25in")
  writer.WriteStartElement("TablixCells")
  ForEach fieldName In m_fields
      writer.WriteStartElement("TablixCell")
      writer.WriteStartElement("CellContents")
      writer.WriteStartElement("Textbox")
      writer.WriteAttributeString("Name", Nothing, "Header" + fieldName)
      ' writer.WriteAttributeString("CanGrow",  True)' writer.WriteAttributeString("Keeptogether", True)
      writer.WriteStartElement("Paragraphs")
      writer.WriteStartElement("Paragraph")
      writer.WriteStartElement("TextRuns")
      writer.WriteStartElement("TextRun")
      writer.WriteElementString("Value", fieldName)
      writer.WriteStartElement("Style")
      writer.WriteElementString("TextDecoration", "Underline")
      writer.WriteElementString("PaddingTop", "0in")
      writer.WriteElementString("PaddingLeft", "0in")
      writer.WriteElementString("LineHeight", ".5in")
      ''writer.WriteElementString("Width", "1.5in")''writer.WriteElementString("Value", fieldName)
      writer.WriteEndElement() ' Style
      writer.WriteEndElement() ' TextRun
      writer.WriteEndElement() ' TextRuns
      writer.WriteEndElement() ' Paragraph
      writer.WriteEndElement() ' Paragraphs
      writer.WriteEndElement() ' TexBox
      writer.WriteEndElement() ' CellContents
      writer.WriteEndElement() ' TablixCellNext
  writer.WriteEndElement() ' TablixCells
  writer.WriteEndElement() ' TablixRow'writer.WriteEndElement() ' TablixRows          Do not close Rows tag here colse it after details'End of Headers'Details Rows'writer.WriteStartElement("TablixRows")         Since Rows tag in header is not closed not need to open fresh tag
  writer.WriteStartElement("TablixRow")
  writer.WriteElementString("Height", ".25in")
  writer.WriteStartElement("TablixCells")
  ForEach fieldName In m_fields
      writer.WriteStartElement("TablixCell")
      writer.WriteStartElement("CellContents")
      writer.WriteStartElement("Textbox")
      writer.WriteAttributeString("Name", Nothing, fieldName)
      '  writer.WriteAttributeString("CanGrow", True)'  writer.WriteAttributeString("Keeptogether", True)
      writer.WriteStartElement("Paragraphs")
      writer.WriteStartElement("Paragraph")
      writer.WriteStartElement("TextRuns")
      writer.WriteStartElement("TextRun")
      'writer.WriteElementString("Value", fieldName)
      writer.WriteElementString("Value", "=Fields!" + fieldName + ".Value")
      writer.WriteStartElement("Style")
      writer.WriteElementString("TextDecoration", "Underline")
      writer.WriteElementString("PaddingTop", "0in")
      writer.WriteElementString("PaddingLeft", "0in")
      writer.WriteElementString("LineHeight", ".5in")
      ''writer.WriteElementString("Width", "1.5in")''writer.WriteElementString("Value", fieldName)
      writer.WriteEndElement() ' Style
      writer.WriteEndElement() ' TextRun
      writer.WriteEndElement() ' TextRuns
      writer.WriteEndElement() ' Paragraph
      writer.WriteEndElement() ' Paragraphs
      writer.WriteEndElement() ' TexBox
      writer.WriteEndElement() ' CellContents
      writer.WriteEndElement() ' TablixCellNext
  writer.WriteEndElement() ' TablixCells
  writer.WriteEndElement() ' TablixRow
  writer.WriteEndElement() ' TablixRows'End of Details Rows
  writer.WriteEndElement() ' TablixBody
  writer.WriteStartElement("TablixRowHierarchy")
  writer.WriteStartElement("TablixMembers")
  writer.WriteStartElement("TablixMember")
  ' Group
  writer.WriteElementString("KeepWithGroup", "After")
  writer.WriteEndElement() ' TablixMember' Detail Group
  writer.WriteStartElement("TablixMember")
  writer.WriteStartElement("Group")
  writer.WriteAttributeString("Name", Nothing, "Details")
  writer.WriteEndElement() ' Group
  writer.WriteEndElement() ' TablixMember
  writer.WriteEndElement() ' TablixMembers
  writer.WriteEndElement() ' TablixRowHierarchy
  writer.WriteStartElement("TablixColumnHierarchy")
  writer.WriteStartElement("TablixMembers")
  'writer.WriteStartElement("TablixMember")ForEach fieldName In m_fields
      writer.WriteStartElement("TablixMember")
      writer.WriteEndElement() ' TablixMemberNext' writer.WriteEndElement() ' TablixMember
  writer.WriteEndElement() ' TablixMembers
  writer.WriteEndElement() ' TablixColumnHierarchy
  writer.WriteElementString("DataSetName", "tbdataset")
  writer.WriteEndElement() ' Tablix
  writer.WriteEndElement() ' ReportItems
  writer.WriteEndElement() ' Body
  writer.WriteStartElement("Page")
  ' Page Header Element
  writer.WriteStartElement("PageHeader")
  writer.WriteElementString("Height", "1.40cm")
  writer.WriteStartElement("ReportItems")
  writer.WriteStartElement("Textbox")
  writer.WriteAttributeString("Name", Nothing, "Textbox1")
  writer.WriteStartElement("Paragraphs")
  writer.WriteStartElement("Paragraph")
  writer.WriteStartElement("TextRuns")
  writer.WriteStartElement("TextRun")
  writer.WriteElementString("Value", Nothing, "ABC CHS.")
  writer.WriteEndElement() ' TextRun
  writer.WriteEndElement() ' TextRuns
  writer.WriteEndElement() ' Paragraph
  writer.WriteEndElement() ' Paragraphs
  writer.WriteEndElement() ' TextBox
  writer.WriteEndElement() ' ReportItems
  writer.WriteEndElement() ' PageHeader
  writer.WriteEndElement() ' Page
  writer.WriteEndElement() ' ReportSection
  writer.WriteEndElement() ' ReportSections' DataSources
  writer.WriteStartElement("DataSources")
  writer.WriteStartElement("DataSource")
  writer.WriteAttributeString("Name", Nothing, "tbdata")
  writer.WriteStartElement("DataSourceReference")
  writer.WriteEndElement() ' DataSourceReference
  writer.WriteEndElement() ' DataSource
  writer.WriteEndElement() ' DataSources'DataSet
  writer.WriteStartElement("DataSets")
  writer.WriteStartElement("DataSet")
  writer.WriteAttributeString("Name", Nothing, "tbdataset")
  writer.WriteStartElement("Query")
  writer.WriteElementString("DataSourceName", Nothing, "tbdata")
  'writer.WriteElementString("CommandText", Nothing, "/* Local Query */")
  writer.WriteElementString("CommandText", Nothing, "TableDirect")
  writer.WriteEndElement() ' Query'Fields
  writer.WriteStartElement("Fields")
  ForEach fieldName In m_fields
      writer.WriteStartElement("Field")
      writer.WriteAttributeString("Name", Nothing, fieldName)
      writer.WriteElementString("DataField", fieldName)
      writer.WriteElementString("rd:TypeName", fieldName.GetType.ToString)
      writer.WriteEndElement() ' FieldNext
  writer.WriteEndElement() ' Fields' rd datasetinfo
  writer.WriteEndElement() ' DataSet
  writer.WriteEndElement() ' DataSets
  writer.WriteEndElement() ' Report' Flush the writer and close the stream
  writer.Flush()
  stream.Close()
  'Convert to StreamDim myByteArray AsByte() = System.Text.Encoding.UTF8.GetBytes("D:\MyTestReport2.rdlc")
  Dim ms AsNewMemoryStream(myByteArray)
  'Supply Stream to ReportViewer
  ReportViewer1.LocalReport.LoadReportDefinition(ms)
  ReportViewer1.LocalReport.Refresh()When I open rdlc in designer I get following error"Data at the root level is invalid."When I run the aspx I get following error
An error occurred during local report processing.
The definition of the report '' is invalid.
The definition of this report is not valid or supported by this version of Reporting Services.
The report definition may have been created with a later version of Reporting Services, or contain content that is not well-formed or not valid based on Reporting Services schemas.
Details: Data at the root level is invalid. Line 1, position 1.
Can anybody guide me?

Hi RACES,
Based on your description, I'm afraid that it is not the correct forum for this issue, but maybe I could help you find a more appropriate forum.
If it is related to the Visual Studio Report Controls, you could select this forum:
https://social.msdn.microsoft.com/Forums/en-US/home?forum=vsreportcontrols
But if it is the SSRS issue, maybe this forum would be better for you:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

The security level is set to High

Windows 2008R2 terminal Server
Office 2013
Adobe Acrobat XI update 9
When trying to create a PDF from a word document (have not tried other files yet), Adobe hangs for about 2 mins and then gives the following message
The Security Level is set to High
Please run the application which created this document, in the "Security Warning" dialog select the check box "Always trust macros from this source" and enable macro's created by Adobe Systems inc
No 1. There is absolutely no need for an apostrophe in the second instance of the word macros
Have deployed the Adobe Acrobat Administrative template and enabled the following setting
'Automatically Trust Sites for Win OS Security Zones' (Elevates the trusted sites list in Internet Explorer to privileged locations so that they may bypass enhanced security restrictions. When enabled, the trust list is a union of IE's trust list and Acrobat's privileged locations list. GUI mapping: Edit > Preferences > Security (Enhanced) > Automatically trust sites for my Win OS security zones)
- not a fix
Have exported every digital signature from the pdf office dlls and imported to the computer certificate store - not a fix
Have disabled every office macro and security setting - not a fix
Does not matter if the file being converted is on a UNC path, mapped drive, or local drive
Have added all file locations containing office docs to trusted folders in Word and Adobe - not a fix
R-Click context menus for combining and conversion work fine however I understand that this uses the Adobe PDF Printer and not the office addons
Opening a file in Word and converting to a PDF using the Addon is fine as is printing to the PDF Printer
This issue only occurs from within the Adobe Acrobat Application 'Create file from PDF' and currently only seems to affect Office documents
I cannot see how to give Adobe any more trust

Solved
I was running Office in a 'RunVirtual' environment. This man explains it best
http://ppe.blogs.technet.com/b/gladiatormsft/archive/2014/02/05/app-v-5-on-run-virtual-rds -run-virtual-virtualizable-ext…
Essentially Office and Acrobat are installed Natively however all Office Apps are configured to run in a Virtual environment so that Office Addins which are true AppV applications can be linked into Office.
My 'Empty' 'RunVirtual Office package did not have 'Com Integration' enabled
Adobe Acrobat makes use of a Com Addin for Office, so Office was unable to expose that to Adobe Acrobat until the 'Empty' 'RunVirtual Office package was updated accordingly

Problem in changin the username at the Step Level

Hi All,
I had a small problem with background processing in SM37.I was trying to change a job which was running from my Id to some other Id which I needed to run from.I changed it successfully, but the problem is the job is running under new Id now, but all the steps related to that job are running under my id(i.e., old id) itself.Could anybody please help me out how to change the username at the step level also?
Thanks in advance...
Regards,
Sravanthi

hi
->Log on to the new Id and select the job which was running under old id.
->Then,make a duplicate copy of the job from the menu option Job->Copy.
->Now, it will ask for a name give the new name
->Now, that job will be under new id in Shcheduled status.
with all the steps being under old id still.
->Now, again select that particular newly copied job and
->click on step,Select the step by clicking on it.
->And, now go to the menu option Job->Change,there u will be able to change the userid from the old one to the one which u wish to have.......That will work fine after releasing the job from Scheduled status to Release status.
regards
venkat

How do you get to the DOS prompt so that you can type in the info to help get into itunes store??? One post said search cmd, right click, run as administrator but where is the search cmd??

Have been struggling for days trying to get into the itunes store. Have contacted support with no help. I have been reading how some have typed something into a DOS prompt and have resolved their issues. One stated to "search cmd, right click, and run as admininstrator" but where is this? There was also a post about typing something into the DOS prompt....how do I get to this? Can someone please help??? SOOOOO FRUSTRATING. Thanks much...Carrie (Mike's wife:))

One stated to "search cmd, right click, and run as admininstrator" but where is this?
In the search field in your Vista start menu, type cmd
Next, right-click on the cmd that comes up and select "Run as administrator".

Accesing the OS at the DOS level

Similar Messages

Maybe you are looking for