Access 2010: Cannot access design view, relationships

I created a database and added seven tables and their fields. I cannot assign primary keys or use the relationship tool. The design view is either not a presented option or is grayed out. I have searched for an answer but what I've found either does not
work for me or does not apply to me. The file is NOT a template, it is NOT read-only, it is NOT a mdb or mde file (it is accdb), and I HAVE tried holding the shift key when opening it. It is saved to my local machine.
Microsoft Office Professional Plus 2010. Activated. Version 14.0.5128.5000 (32-bit).

Every file orrured the issue? If yes, try repair office.
KR

Similar Messages

Cannot access iphoto: Cannot access iphoto since upgraded to OS X Yosemite. Following the message to use the library upgrader is getting me no where. I followed the install prompts and still cannot access my own photos. Very frustrating. I've tried 5

Cannot access iphoto since upgraded to OS X Yosemite. Following the message to use the library upgrader is getting me no where. I followed the install prompts and still cannot access my own photos. Very frustrating. I've tried 5 or 6 times already and end up with the same result. NOTHING...
Library Upgrader IS NOT WORKING. Please help

Thx Leonie,
Surprisingly, I just went to the crash reporter and there were no reports re: the iPhoto issue. This is the only report I found, which I not sure is related to the iPhoto issue:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>OSBuild</key>
<string>10.10.2:14C109</string>
<key>appRecords</key>
<array>
<array>
<string>AppRecord</string>
<string>DiskImageMounter</string>
<string>com.apple.DiskImageMounter</string>
<string>396</string>
<string>10.10.1</string>
<integer>7</integer>
<integer>0</integer>
<integer>1</integer>
<integer>0</integer>
<integer>0</integer>
<integer>0</integer>
<integer>0</integer>
<integer>0</integer>
</array>
<array>
<string>AppRecord</string>
<string>com.apple.ncplugin.weather</string>
<string>com.apple.ncplugin.weather</string>
<string>32.3</string>
<string>1.0</string>
As for the TimeCapsule indeed, I use it as an extended drive but I'm surprised it would be considered a FAT-32 formatted drive as this is an Apple device.
I asked the apple reps if I could use the TimeCapsule for such purpose and no one raised a concern. It's also surprising that I didn't have an issue with this prior to the upgrade to OS X Yosemite.
Having said the above, thank you for your help - if the TimeCapsule is indeed the issue, perhaps I can solve the issue by transferring the iphoto library to an OS extended hard drive.

[network access] User cannot access through network

Hi!
I'm facing a strange problem now.
One of the users of my WD Personal Cloud cannot access through network share. When he tries to login the same fails and the login is prompted again. This happens in Windows but happens also in Linux.
When the same user tries to login in the mobile cloud app or in the browser (only in windows because after all this years the browser cloud funcionality still not works for Linux users, a shame...) it works as it should be.Also i tried to create a new users and happens the same, in the app or browser works great in network share simply refuse to login! I already rebooted, turn off, disconnected and did other things but nothing worked.
There are 9 users and 10 share in he cloud and the firmware version is v04.01.04-422. The diagnosis is OK!
Thanks for the help. Best Regards.

Hi again! There is no error. When i enter the share ask for the login credentials, i insert user and password and when i click ok simply ask the credentials again, and again, and again... It's the same compotment as if the credentials are wrong but they are not, i use them for online login in wd2go.com or mobile app and they work.And another thing is that if i create a new user happens the same, i can login in mobile app and wd2go.com but in the windows share (or samba share if in Linux) it fails without any error, simply ask for the credentials again and again and again... The old users works fine. The comportment is same with IP or name. Thanks for the help, Best Regards.

Cannot see Design View

After using Dreamweaver CS for years, I suddenly am unable to view some of my documents in Design View. All I see is an included header and footer, but none of the content that lies in between. However, I do see the content in Code View and Live View. This is not true for all pages, but I can't find a pattern as to why some show properly and others don't. Any ideas?

Bad code is bad code. If you look through the validation results, the items to red-flag are those that refer to missing or extra tags. When the row/column count for a row is not consistent with the table's overall structure, DW throws up its hands and just doesn't render it. Browsers will do that too.
I'm completely confident this has nothing to do with the use of templates. And excuse me but SEVEN TEMPLATES? Egad....

ICloud with outlook 2010: Cannot access email in the client

Remove the mail profile and try again.

Hello Spiceheads,
Here is the issue. An end user has iCloud and downloaded and installed the client on her workstation. Up until about a couple of weeks ago, it was working just fine. Now, in outlook 2010, it constantly prompts for a username and password. The kicker is that she is using the correct one. I had her login to the web interface with the same username and password and she logged in just fine. Tried uninstalling and reinstalling, but that didnt fix the issues. Any suggestions?
This topic first appeared in the Spiceworks Community

Can't save changes to forms in access 2010 db format 2007

Access 2010 - file format Access 2007 cannot save design changes
On a previously designed form which works, I went back to change a check box from enabled "Yes" to "No" - I am then prompted to save changes and I click "Yes" but the form will not save or close. To close the form I must select "No" to the changes and they
are lost. If I return to form view the changes are also lost when I close.
I have exclusive access to the DB and per some other suggestions I have checked the box to open in exclusive and uncheck the box "Track name AutoCorrrect Info". I have also used compact and repair, which is also done on a regular basis.
I have found that it is beginning to occur on other forms as well for no apparent reason.
History:
This was originally an Access 97 database that had been upgrade, all forms, reports, etc., had been imported into a new Access 2007 database. It has been running fine for the past month and we have been making design changes with no issues up to this point.
The database is running on MS Server 2008r2 Terminal Services

Hi Iasun:
I have exactly the same problem that you had and have not been able to solve it. As you say, forms can be modified but no be saved; you can´t either change it´s name or delete it. Many forms in a large application that I developed have
the same problem and it seems that with time more forms are becoming "damaged"
What I have done is to open the "damaged" form in design view and copied all controls to a new Form, leaving the old form unused. This is not a real solution but it´s the only way that I have found to change the original form.
Your comment is more than a year old, have you already found a good solution?
My application was originally developed in Access2007 and still running under it so it is not a problem related to 2010.

Install Access 2010 Full and Runtime together on one machine?

Hi,
a client at my company has many access database projects. They run mostly fine with Access Runtime. We provide the Apps with a Server 2008 R2 via Terminal Services as RemoteApp. Is there a way to install the Full Access Version parallel to the Runtime? So
if i publish a RemoteApp i just can choose between the two paths for Runtime or Full and provide the AccessApp either with one of both?
AFAIK if i install the full Version of Access 2010, it overwrites the Runtime and uses the same paths as the Runtime used before (something like C:\Program Files (x86)\Microsoft Office\Office14\MSACCESS.exe)
Thanks in advance for your hints,
Rolf

Hi,
Yes, of course you could install the Access 2010 and Access Runtime 2010 in the same machine.As you know the Access Runtime 2010's detail imformation, you could choose to distribute those Access 2010 solutions so that they run without requiring
a full installation.
And the Access 2010 full version is also included in Office 2010, you could choose only install the Access 2010 and change the install path by using OCT.
Regards,
George Zhao
TechNet Community Support

JSF design view - visual components are shrinking

Hello,
I have some strange issue while using Design view for JSF and data binding.
Once I drop any data control elements into visual component (panel, etc) my visual components are shrinking to such size, that I cannot distinguish any elements within design view. I cannot use design view since then and have to place all elements base on structure panel.
How to reproduce:
1. Create new JSF page with wizard and accept defaults.
2. Drop one of the panels (panel box, panel group layout) into JSF layout
At this stage my visual elements occupy 100% of design view screen and represent anticipated outcome
3. Drag and drop one of the data control elements (data control panel) into created panels on JSF and create table or form
Immediately after it visual panel where data control was dropped shrinks to approximately 1/4 of the screen and I cannot see neither available space nor created table for my data components.
I figured out, that if I remove created by wizard default <af:messages> tag from the top of my JSF, then design view representation fixes. Not sure if I should remove <af:messages> from all my pages.
Above all looks to me as and bug.
Environment:
-Jdeveloper 11g
-Windows Vista 64b
-Not bundled JDK 6

Hi Shay,
Thank you for response.
1. I tried to play with screen size without result
2. I checked your video post, but this does not resolve my issue
3. This issue occures with all JSF pages and can be reproduced even when following official Oracle step by step tutorials.
4. I figured out, that removing <af:messages> tag resolves the issue ?! It seems this tag is added by default during drag and drop binding.
5. On this link http://drop.io/jdev_001 you can see how design view is changes with and without <af:messages> tag
6. Below is code example from one of the tutorials, that leads to shrinking as well:
7. Once app is deployed and running page get normal view in IE as expected, so it seems to me, it is issue with Jdev design view, probably influenced by my environment, if nobody reported it before.
Thank you for your help.
===========================================================================
<?xml version='1.0' encoding='windows-1252'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1" xmlns:f="http://java.sun.com/jsf/core" xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=windows-1252"/>
<f:view>
<af:document id="d1">
<af:messages id="m1"/>
<af:form id="f1">
<af:panelStretchLayout id="psl1">
<f:facet name="center">

<af:decorativeBox theme="dark" id="db1">
<f:facet name="center">
<af:decorativeBox theme="medium" id="db2">
<f:facet name="center">
<af:panelFormLayout id="pfl1">
<af:inputText value="#{bindings.p_name.inputValue}" label="#{bindings.p_name.hints.label}"
required="#{bindings.p_name.hints.mandatory}" columns="#{bindings.p_name.hints.displayWidth}"
maximumLength="#{bindings.p_name.hints.precision}" shortDesc="#{bindings.p_name.hints.tooltip}" id="it1">
<f:validator binding="#{bindings.p_name.validator}"/>
</af:inputText>
<af:commandButton actionListener="#{bindings.getEmployeesFindByName.execute}" text="getEmployeesFindByName"
disabled="#{!bindings.getEmployeesFindByName.enabled}" id="cb1"/>
<af:panelFormLayout id="pfl2">
<af:inputText value="#{bindings.commissionPct.inputValue}" label="#{bindings.commissionPct.hints.label}"
required="#{bindings.commissionPct.hints.mandatory}" columns="#{bindings.commissionPct.hints.displayWidth}"
maximumLength="#{bindings.commissionPct.hints.precision}" shortDesc="#{bindings.commissionPct.hints.tooltip}"
id="it4">
<f:validator binding="#{bindings.commissionPct.validator}"/>
<af:convertNumber groupingUsed="false" pattern="#{bindings.commissionPct.format}"/>
</af:inputText>
<af:inputText value="#{bindings.email.inputValue}" label="#{bindings.email.hints.label}"
required="#{bindings.email.hints.mandatory}" columns="#{bindings.email.hints.displayWidth}"
maximumLength="#{bindings.email.hints.precision}" shortDesc="#{bindings.email.hints.tooltip}" id="it7">
<f:validator binding="#{bindings.email.validator}"/>
</af:inputText>
<af:inputText value="#{bindings.employeeId.inputValue}" label="#{bindings.employeeId.hints.label}"
required="#{bindings.employeeId.hints.mandatory}" columns="#{bindings.employeeId.hints.displayWidth}"
maximumLength="#{bindings.employeeId.hints.precision}" shortDesc="#{bindings.employeeId.hints.tooltip}"
id="it6">
<f:validator binding="#{bindings.employeeId.validator}"/>
<af:convertNumber groupingUsed="false" pattern="#{bindings.employeeId.format}"/>
</af:inputText>
<af:inputText value="#{bindings.firstName.inputValue}" label="#{bindings.firstName.hints.label}"
required="#{bindings.firstName.hints.mandatory}" columns="#{bindings.firstName.hints.displayWidth}"
maximumLength="#{bindings.firstName.hints.precision}" shortDesc="#{bindings.firstName.hints.tooltip}" id="it3">
<f:validator binding="#{bindings.firstName.validator}"/>
</af:inputText>
<af:inputDate value="#{bindings.hireDate.inputValue}" label="#{bindings.hireDate.hints.label}"
required="#{bindings.hireDate.hints.mandatory}" shortDesc="#{bindings.hireDate.hints.tooltip}" id="id1">
<f:validator binding="#{bindings.hireDate.validator}"/>
<af:convertDateTime pattern="#{bindings.hireDate.format}"/>
</af:inputDate>
<af:inputText value="#{bindings.jobId.inputValue}" label="#{bindings.jobId.hints.label}"
required="#{bindings.jobId.hints.mandatory}" columns="#{bindings.jobId.hints.displayWidth}"
maximumLength="#{bindings.jobId.hints.precision}" shortDesc="#{bindings.jobId.hints.tooltip}" id="it2">
<f:validator binding="#{bindings.jobId.validator}"/>
</af:inputText>
<af:inputText value="#{bindings.lastName.inputValue}" label="#{bindings.lastName.hints.label}"
required="#{bindings.lastName.hints.mandatory}" columns="#{bindings.lastName.hints.displayWidth}"
maximumLength="#{bindings.lastName.hints.precision}" shortDesc="#{bindings.lastName.hints.tooltip}" id="it8">
<f:validator binding="#{bindings.lastName.validator}"/>
</af:inputText>
<af:inputText value="#{bindings.phoneNumber.inputValue}" label="#{bindings.phoneNumber.hints.label}"
required="#{bindings.phoneNumber.hints.mandatory}" columns="#{bindings.phoneNumber.hints.displayWidth}"
maximumLength="#{bindings.phoneNumber.hints.precision}" shortDesc="#{bindings.phoneNumber.hints.tooltip}"
id="it9">
<f:validator binding="#{bindings.phoneNumber.validator}"/>
</af:inputText>
<af:inputText value="#{bindings.salary.inputValue}" label="#{bindings.salary.hints.label}"
required="#{bindings.salary.hints.mandatory}" columns="#{bindings.salary.hints.displayWidth}"
maximumLength="#{bindings.salary.hints.precision}" shortDesc="#{bindings.salary.hints.tooltip}" id="it5">
<f:validator binding="#{bindings.salary.validator}"/>
<af:convertNumber groupingUsed="false" pattern="#{bindings.salary.format}"/>
</af:inputText>
<f:facet name="footer">
<af:panelGroupLayout layout="vertical" id="pgl1">
<af:panelGroupLayout layout="horizontal" id="pgl2">
<af:commandButton actionListener="#{bindings.First.execute}" text="First" disabled="#{!bindings.First.enabled}"
partialSubmit="true" id="cb2"/>
<af:commandButton actionListener="#{bindings.Previous.execute}" text="Previous" disabled="#{!bindings.Previous.enabled}"
partialSubmit="true" id="cb3"/>
<af:commandButton actionListener="#{bindings.Next.execute}" text="Next" disabled="#{!bindings.Next.enabled}"
partialSubmit="true" id="cb4"/>
<af:commandButton actionListener="#{bindings.Last.execute}" text="Last" disabled="#{!bindings.Last.enabled}"
partialSubmit="true" id="cb6"/>
</af:panelGroupLayout>
<af:commandButton text="Save" id="cb5" actionListener="#{bindings.mergeDepartments.execute}"
disabled="#{!bindings.mergeDepartments.enabled}" action="browse"/>
</af:panelGroupLayout>
</f:facet>
</af:panelFormLayout>
</af:panelFormLayout>
</f:facet>
</af:decorativeBox>
</f:facet>
</af:decorativeBox>
</f:facet>
</af:panelStretchLayout>
</af:form>
</af:document>
</f:view>
</jsp:root>
Edited by: user555411 on May 2, 2010 2:08 PM

Unable to view php files in Design View?

Need help! I cannot select design view when working with a PHP document, the DesignView option is disabled?
My information.
- Dreamweaver CS5
- Mac OSX 10.6 snow Lepoard
I have searched online and I also went through the FAQ but couldn’t find anything relating to this particular issue and my Professor at school said that I need to contact Adobe directly as design view should always be available but all that I would see in Design View are the HTML elements within the PHP file.
The Design View button is disabled, I can not click on it all and so for my class assignments. I have to copy the PHP code into a new HTML document and only then am I able to view the html/php and edit the HTML elements, and then copy and paste it back into the PHP file once I have the html elements/design set up correctly.
I did a similar “Set up PHP for Mac OS X – MAMP” to the version available here, could I have set this up incorrectly and that is why Design View is disabled?
Thanks I appreciate your guys expertise and any help!

Kanjan wrote:
Need help! I cannot select design view when working with a PHP document, the DesignView option is disabled?
Go to Dreamweaver > Preferences, and select File Types / Editors from the Category list on the left. Make sure that .php is NOT listed among the filename extensions in "Open in code view".
Adding a filename extension to that list prevents files from being opened in Design view.

Access 2010 on 64 Bit Windows 7 Access "Not Responding" when changing from forms view to design view and back

I am running
Windows 7 64 bit
Access 2010 32 bit
Developing an application with a split FE BE with both files local but continue to have the message "Not Responding" when switching from forms view to design view and back as well as if I try to connect to a subform or object on the sub form.

I have seen this behavior when the form's RecordSource is a complex query such as a crosstab or a query with several nested queries. To test if this is your case, remove the RecordSource and see if the form starts acting normal again.
Then again, if the form has several subforms they might be slowing up the loading time.
Bill Mosca
www.thatlldoit.com
http://tech.groups.yahoo.com/group/MS_Access_Professionals

Error on load: System.IO.IOException: The process cannot access the file : error in event viewer when users want to view documents from this third party deployed scan solution

Error on load: System.IO.IOException: The process cannot access the file
'\\server1\SCANSHARED\.pdf' because it is being used by another process.
   at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
   at System.IO.File.WriteAllBytes(String path, Byte[] bytes)
   at abc.Scan.Layouts.ICC.Scan.View.Page_Load(Object sender, EventArgs e)
I faced this error in event viewer when users want to view documents from this third party deployed scan solution
here I have two WFS servers and they configured with load balancing in F5 .
when I enable both servers in F5 I receive this error messages in 2nd server,
when users want to view documents
adil

Do you have antiVirus installed on the sharepoint servers?
These folders may have to be excluded from antivirus scanning when you use file-level antivirus software in SharePoint. If these folders are not excluded, you may see unexpected behavior. For example, you may receive "access denied" error messages when files
are uploaded.
Please follow this KB and exclude the folders from Scanning.
http://support.microsoft.com/kb/952167
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

SharePoint Designer 2013 cannot access workflows in Office 365 Site

I have an Office 365 SharePoint site with a number of workflows that I have created on my machine with SPD 2013. After a number of weeks I was unable to access the workflows from my machine through SPD (while still being able to access pages, site assets
etc.), getting the following error: (Am restricted from submitting images)
"Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities"
Restarting SPD doesn't help, after clicking OK I get the "SharePoint Designer cannot display the item" screen, prompting me to refresh.
When I do refresh, I get the following:
"Windows Workflow Foundation, part of .Net Framework 3.0, must be installed to use this feature"
This is happening on my machine, Windows 7 64 Bit, SPD 2013 64 Bit, but on a colleague's machine, Win 7 64 Bit, SPD 2013 64 Bit I can access the workflows.
I get the same error if I try to create a new Workflow on my machine but I can create it on my colleague's machine.
I downloaded SPD 2013 on a 32 bit laptop I have access to, in which I can create a workflow. One existing workflow can be accessed, updated etc. with no issue, one opens to a prompt to "Insert a stage" and one tells me that it "Failed to load
the workflow definition for the workflow", then the "SharePoint Designer cannot display the item" screen. All of these workflows can be accessed from my colleague's machine.
Here are the actions that I have taken to date on my own machine:
Cleared the caches multiple times
Checked for updates
Installed .Net Framework 4.5
Re-installed .Net Framework 4.0 (which contains 3.0)
Uninstalled and re-installed SPD 2013
Due to issues with a workflow on the site I am in contact with MS Support who are aware of this issue, they sent me a link to a hot fix that was already installed but they have no concrete idea of what might be going on.
I was convinced that it was an issue on my machine, but I don't know what the issues that I have seen on the 32 bit SPD on the new laptop mean.
I have been searching the internet for a fix with no success, I would appreciate any help.
Thanks
Mick

Hi,
According to your post, my understanding is that SharePoint Designer 2013 cannot access workflows in Office 365 Site.
There was an issue recently when a service release was implemented that incremented the version number in the HTML header on some SharePoint online sites to '16' when SPD was expecting '15'.
I suggest to install internet explore 10 and install a patch for IE10. Then test with "open with windows explore" then opened in SPD from sharepoint online.
In addition, I suggest that in SPD go to Account > Switch Account and type in the credentials of the site you are trying to open (it defaults to your Microsoft Login).
If the issue persists, to troubleshoot this issue, you can uninstall all versions of SharePoint Designer on workstation, clear cache and then reinstalling the latest SharePoint Designer. For the detailed information, you can refer to the
article: http://support.microsoft.com/kb/2794961
Here are two similar threads for you to take a look at:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/15fd1436-3166-4e43-8b22-cdb480091548/cant-open-sharepoint-online-site-in-sharepoint-designer-2013
http://community.office365.com/en-us/forums/154/t/149314.aspx?PageIndex=2
By the way, you can also post the question in Office 365 forum and more experts will assist you.
Office 365 forums
:http://community.office365.com/en-us/forums/default.aspx
More information:
SharePoint
Designer 2013: Server-side activities have been updated:
http://www.andreasthumfart.com/2013/08/sharepoint-designer-2013-server-side-activities-have-been-updated/
Best Regards,
Linda Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I have been working on a book and have 418 photos already in my book. All of a sudden I cannot access the book format to see the multiple view, spread view, or single view. I can no longer see my book although I still see the collection with 418 photos

I have been working on a book and have 418 photos already in my book. All of a sudden I cannot access the book module and clicking on the multiple view, spread view, or single view does not take me back to the book I have been working on. I can no longer see my book although I still see the collection with 418 photos under collections. What I do see is a blank template for a new book and I can't find the unfinished book I started with 418 photos. It is like the new empty template is somehow covering it up. How do I get back to the book I have been working on?

Is it possible you mistakenly clicked on a [Clear Layout] button?
But a great hint is- Always click on the [Create a Saved Book] button, early in your new book design.
Then you have a permanent link to the book in the Collections panel. (In addition to the standard collection of your selected images)
Note: a Book Collection shows an icon that looks like a book.
Every time you come back to edit the book, open the Book Module by clicking on the white arrow that appears on the end of your Book Collection title. (The title as saved)
Re-opening a book without using the "Saved Book" option can have unpredictable results.
A "Book" Collection is like a "Smart Collection" because anything you do to the book design, change pages, change images, etc, is automatically updated in the Saved Book collection.

This database was connected to a Microsoft Access Services site that is not compatible with this version of Microsof Access. You cannot make design changes or modify data in database.

Hello All,
I am getting this error while I am connecting my access database website for the change
"This database was connected to a Microsoft Access Services site that is not compatible with this version of Microsof Access. You cannot make design changes or modify data in database."
I am using SharePoint 2010 and Microsoft Office 2010.
I have created one Contact Database Site and now I am trying to modify the layout of the form in Access. and I am getting the error that I have mentioned.
Please provide help on it.
Thanks in Advance....

Hello All,
I got the answer, we have to enable the port 80 or where the access service is deployed and we have to change Trust setting and also, enable the macro from Access.
Hope this will help to other....

How to access design view in DW CC?

I am new to DW and am working in fluid grid. tutorial references design view (maybe with a toggle switch) - cannot find how to access 'design view'. any help would be appreciated.

If you use CC 2014.1 (October release) or 2014.1.1 (February release) you can't get to Design View b/c it was removed from FGLayouts.
New Features in CC 2014.1 October Release
http://helpx.adobe.com/dreamweaver/using/whats-new.html
New Features in CC 2014.1.1 February Release
https://helpx.adobe.com/dreamweaver/using/whats-new.html#Enhancements%20to%20Live%20View%2 0editing
Nancy O.

Access 2010: Cannot access design view, relationships

Similar Messages

Maybe you are looking for