Access 2010 table has too many fields for web database - how to split into two web-compatible tables?

Hello,
I'm in the process of converting an Access 2010 database into a web database and I'm having some trouble. I have a table which has 236 fields, which is more than the 220 field limit for web-compatible tables. I have tried to split this table into two tables
with a one-to-one relationship, but web tables can only use lookups as relationships. I've tried to connect the tables with a lookup and then synthesize a one-to-one relationship by using data macros but I'm not having much luck.
I realize that 236 fields is a lot, but it must be set up this way because each field represents a tasks and is a yes/no box to verify that the task has been completed - and the records are different employees for whom which the tasks need to be completed.
Could someone please help me figure out a way to make this table web compatible?
Thank you,
Ryan

Hi,
I found that you've cross post the quesion on our Answer forum, are you satisfiled the reply from there?
http://answers.microsoft.com/en-us/office/forum/office_2010-access/access-2010-table-has-too-many-fields-for-web/06ee81ea-24ab-48b8-9b8f-0ed08a868bac
Regards,
George Zhao
TechNet Community Support

Similar Messages

Table has too many columns for one pg in InDesign document. How do I force a break?

I have imported an Excel table into my InDesign document. The table is 598 columns wide. Obviously this isn't fitting on one page. I want it to just keep flowing from page to page, keeping one same column at the beginning of each page (like "freeze panes" does in Excel) but it's not doing that. Is this possible in my InDesign document or will I have to manually copy and paste 10 columns at a time, which is about how many are fitting on one page? Any searches I do on this subject just talk about flowing rows but nothing about columns.

As far as I know there's probably no way ID is going to do what you want.
You can place a table across a multiple page spread, but the odds of being able to do that and still keep the file printable are marginal, at best. You can't for example, leave blank space at the gutters unless you are able to add a blank column that spans the gutter, and the limt for multipage spreads is 10 pages wide, whcih doesn't sound like it's probably enough to hold almost 600 columns.
Perhaps placing the table using named ranges of appropriate widths would work...

Too Many Photos for one album - How do I create a 2nd album w/o losing my work?

I had no idea there was a 100 page cap on photo albums. I was ¾ of the way through a photo album when I hit the 100 pp. ceiling. Now I want to divide my event into two separate albums, without re-doing all my work. Any suggestions?

This worked perfectly, Terence, thanks so much for the suggestion!

When I try to burn music from my Playlist to a blank CD, the notification tells me that the list has too many minutes for the CD, even if I try to burn just one song. What's going on?

WHEN I TRY TO BURN MUSIC FROM MY PLAYLIST TO A BLANK CD, THE NOTIFICATION COMES UP AND TELLS ME I AM EXCEEDING THE NUMBER OF MINUTES THE CD WILL HOLD. THIS NOTIFICATION HAPPENS EVEN IF I TRY TO BURN JUST ONE SONG. WHAT'S GOING ON?

Katy, you are completely doing things in the wrong order. You can't burn songs if you can't even play them, and iTunes can't play them if it can't find them.
The exclamation point normally occurs if the song file, or one of its containing folders, has been moved, renamed or deleted. So if you encounter a track with an exclamation point, don't do anything else until you find the file. It is usually somewhere else on your hard drive, or else in the Recycle bin. Failing both of those, get it from your most recent backup.
After your restore it, make sure it can play. If it can play you can put it into a playlist. Then you can burn the playlist.

E Table of aggregate has too many partitions

Hi,
While checking performance info of the query I'm getting red light on one of the lines saying aggregate 100067 has too many partitions in E table.
Could you guys pls let me know what is this all about and how to reslove the same?
Thanks
R

Does your cube have compress after rollup on the aggregates...?
The aggregate is partitioned in the same way the E fact table is partitioned. You should choose the compress upon rollup option in the rollup tab of the infocube... Set the same and then if possible deactivate and do another rollup to the aggregate...

OLE or COM Processing error : Too many fields defined

i have created a excel workbook format in data integrator and defined the fields in it, when i tried to run a simple job extracting data from spreadsheet , i am getting following error OLE or COM Processing error : <Too many fields defined>.
all i have in the spreadsheet is 18 rows and 35 columns of data, can any help how to solve this problem. i have used query transform for extracting and loading the data in to a table
Edited by: Rakesh Chittineni on Apr 1, 2010 3:45 AM

I have Solved the problem my friend suggestion.
The excel file i was trying to access is from WEBI report which was saved as .xls format and then then made some modifications to the spreadsheet.
What i did was i deleted the unused columns, i.e my spread sheet has data upto AQ column so i deleted remaining cells.
and while defining the excel file format i selected the option workbook and selected the proper sheet and in the other options i have chosen column range and also check the box ( extended range) now i could over come the error OLE or COM processing error
Edited by: Rakesh Chittineni on Apr 1, 2010 9:44 PM

11g-[nQSError: 42029] Subquery contains too many values for the IN predicat

Hi,
I am having 2 reports one is for subquery which returns inputs to Main report. Actually the report was working fine in 10g. But in 11g we are gettting following error:
View Display Error
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 42029] Subquery contains too many values for the IN predicate.Please have your System Administrator look at the log for more details on this error. (HY000)
Please have your System Administrator look at the log for more details on this error.
Getting same error after modofying the parameter value MAX_EXPANDED_SUBQUERY_PREDICATES to 12000
Please suggest what could be the other reason it may fail or any other settings we need to check.
Regards,
ckeng

ckeng,
Normally the IN clause has restriction of 10000 values in general sql/plsql we will go with inline queries i think model your rpd to generate inner queries
select * from emp where dept_id in (Select distinct dept_id from dept);
or have a condition/filter on sub report and make one more inner report with sub-filter but definitely it will cause performance issues.
thanks,
Saichand.v

Too many lines for CO-PA assessment postings in KSB1

Hi Experts,
I created an assessment cycle in KEU1, with one segment, using an PA transfer structure (several cost elements to several value fields), and I´m using one single secondary cost element (category 42) to credit the cost centers.
When I execute the assessment via KEU5, the credits in the cost centers for the cost element category 42 generates too many lines (for example, I had 3 postings to 3 primary cost elements and in KSB1 I have 9 lines of "credits" - operation KSPA.):
Primary Cost Elements:
4110201004 ==> 3.000,00
4110209009 ==> 2.000,00
4110209013 ==> 1.000,00
Secondary cost element (after settlement through KEU5):
6519999999 ==> 134,36-
                            198,92-
                            190,49-
                            291,54-
                            548,27-
                            311,88-
                            2.659,89-
                            1.268,02-
                            396,63-
Do you know how can I summarize this postings to have only 3 (ore one) line for the secondary cost element? I cannot identify what was the criteria used by SAP to generate 9 lines.
Kind Regards
Mayumi

the number of line item crediting the cost centre, shall be the same of the line item required in the COPA posting. So the more receiver you have in COPA , the more line item are created.
Paolo

Trying to download a movie on a laptop. tellls me i can't play it on that computer because my apple account has too many users. how do i see who is listed as a user so that i can delete one if it's not needed

trying to download a movie on a laptop. tellls me i can't play it on that computer because my apple account has too many users. how do i see who is listed as a user so that i can delete one if it's not needed
please help
[email protected]

The list you saw that shows what drivers are available from Apple Software Update is based on what drivers are supplied by the vendor to Apple. So it would appear that HP has not provided Apple with a scanner driver for 10.9 (known as an ICA driver), or provided an update if one was available for a previous version of OS X, so that you can scan from Image Capture.
I checked the HP web site for your model and they don't show any scanner driver or scanning software. If there was a scanner driver, you would be able to use Vuescan.
As for the Scan button not working, the following is documented by HP
Scanning to the computer from the printer control panel is not available when you scan with Preview, Image Capture, or Printer browser methods. You must use HP Scan software to scan from the printer.
But there does not appear to be any version of HP Scan software available for 10.9. So unless someone else has some workaround, it seems that you won't be able to scan with this model of HP.

Too many fields in SBO 2007.

Hi friends,
I got an error at the moment to update or delete any account numbers in the areas of "Type of Account" from the G/L Account Determination, in a new company that I'm configuring in SBO 2007. The error says "too many fields" and I'm worried that error appears later in the production DB on my customer .
Thanks.
Daniel

Hi Marcia,
Just the error saying "too many fields", and I really want to get out the account or change it for other one. In 2005 i don't have any problem with that. In the other hand, the DB is new.
Thanks.
Daniel

"Bad Data, too many results for shortname"

Every 10 minutes since October 13 the wikid error log has recorded the following error message:
*"Bad Data, too many results for shortname: username"*, always naming the same user, who is not actually doing anything.
Coinciding with that message at the same time every 10 minutes, the system log records 13 or 14 of the following:
*"Python\[15645\]: ••• -\[NSAutoreleasePool release]: This pool has already been released, do not drain it (double release)."*
15645 is a process owned by _teamserver, which would appear to confirm the connection between the python and wikid error messages.
Last clue: The messages (I have determined in hindsight) started while I was setting up the server to do vacation messages. The user named in the "Bad data" messages was the user who wanted to (and did) set up a vacation message at that time. They worked, too.
Anyone have any ideas about what is going on and how to fix it? BTW, google does not find even one page where this "Bad data" error message is mentioned.

Thanks for your response. To answer your questions:
+Are you using AD for your directory?+ No. OD master only.
+Are there users with duplicate shortnames in your directory system?+ No, and to double check, I searched with WGM and only the one came up.
+As a bit of background, the wiki server keeps an private index of user and group information so we can track user preferences, and the "Bad Data, too many results for shortname: username" error is triggered when we do a lookup in that index for a particular user and we (unexpectedly) hit duplicate entries. Are you seeing an issue with using the software, or just an annoying log message?+ It's hard to say (for me) what might be related. The directory or wiki related issues with the server include:
• A memory issue with slapd that eventually causes it to crash. (preceded by lots of "bdbdbcache: db_open(+various: sn, displayname, givenname, mail, maybe others+) failed: Cannot allocate memory (12)" and "logging region out of memory" and "index_param failed" errors.
• The wiki is slow, despite very light use.
• Wake from sleep (network clients with authentication required) can be very slow. Several minutes even.
Any suggestions you may have would be appreciated.

Acme GiFEncoder: java.io.IOException: too many colors for a GIF

I have been using the Acme GifEncoder to save images as gifs. I have been using this quite successfully until today. For some reason it now gives an error when I try to use this in some circumstances. The exception is:
java.io.IOException: too many colors for a GIF
I am not sure why it will work in some situations and not others. If anyone can give any insight on this problem then I would appreciate it.
Thanks

Thanks for the reference to the quantizer. I will try it out and see if it works.
That is going to lead me on to have a bit of a rant about GifEncoders. I realise that gifs are limited to 256 colours. It is ridiculous that a GifEncoder would not limit the number of colours for you. If you have an image in another format such as jpg that does not have a limit the number of colours, the encoder is not able to convert it into gifs unless it has the number of colours reduced. As far as can tell this should be an essential function of the encoder, unless anyone can tell me differently.
Also if anyone can advise me on the Acme JpegEncoder I would appreciate it. It does not seem to work in any shape or form. I am not trying to do anything in particular with it now, so I have no code to show. I did try to use it before and it did not seem to work, so if anyone knows how to get it to work that would be great.
Once again, thanks for your help.

Multisim 2001 "too many parameters for subcircuit" error

When simulating circuits in Multisim 2001 with op amps from User library am getting Netlist Error message "Unable to correctly determine the nodes for the current circuit due to the following reasons:
Too many parameters for subcircuit type lf156_op_amps_1 (instance: xxu3)"
or a similar message for whatever op amp am using. Have tried creating components for several different op amps and always get same error message. Carefully checked the Pin Mapping Table and the symbol pins are correctly matched with order of pins in model. The only way have been able to get a simulation to run with op amp components in the User Library is if copy an op amp directly from Multisim library to User library and make no changes whatsoever. But if do something seemingly minor such as bring up the Symbol editor and add a text note underneath the symbol then get the "too many parameters for subcircuit" error.
Am also getting a Consistency Self Check error stating "Error: The circuit it empty. Simulation requires at least one ground." Do have ground in circuit; presumably this error is related to Netlist error above.
Operating system is Windows XP Professional.

Well, this is an interesting situation in Multisim 2001. I tried doing this with another component and had the same results. I just renamed the part with no other changes and re-saved it to my database and sure enough I got this error. I have no idea what is causing this other than just a bug in the software. Us 2001 users will just have to live with this unless someone does happen to find a solution.
I don't seem to have any problems when creating new components and using or editing existing symbols with new model information. This does suck. What if just wanted to edit one paramenter instead of using a completely different model? I really hope someone can find a workaround or solution to this. I am glad you broughtm this to our attention.
Kittmaster's Component Database
http://ni.kittmaster.com
Have a Nice Day

ORA-00939: too many arguments for function using Timezones in xquery

Running on Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
CREATE TABLE "ORT"."SAMPLE"
( "THEDATE" DATE,
"THETIMESTAMP" TIMESTAMP (6),
"STARTTIMESTAMP" TIMESTAMP (6) WITH LOCAL TIME ZONE,
"ENDTIMESTAMP" TIMESTAMP (6) WITH LOCAL TIME ZONE
REM INSERTING into SAMPLE
SET DEFINE OFF;
Insert into SAMPLE (THEDATE,THETIMESTAMP,STARTTIMESTAMP,ENDTIMESTAMP) values (to_date('13-06-10 14:07:52','RR-MM-DD HH24:MI:SS'),to_timestamp('13-06-19 14:27:52.000000000','RR-MM-DD HH24:MI:SS.FF'),to_timestamp('13-06-19 10:34:04.586000000','RR-MM-DD HH24:MI:SS.FF'),to_timestamp('13-06-19 15:05:38.805000000','RR-MM-DD HH24:MI:SS.FF'));
following query raises ora-00939
SELECT XMLQUERY('for $v in fn:collection("oradb:/ORT/SAMPLE")
let $date1 := $v/ROW/STARTTIMESTAMP/text()
let $date2 := $v/ROW/ENDTIMESTAMP/text()
return if ($date1 < $date2) then (concat($date1," date is less than ", $date2)) else (concat($date1," date is greater than ", $date2)) ' returning content) from dual;
ORA-00939: too many arguments for function
00939. 00000 - "too many arguments for function"
*Cause:
*Action:
any ideas?

Hi Odie,
Not too familiar with XQuery rewrite, but i suspect by providing this hint, Oracle cannot optimize the query whatsoever.... tried this hint in my actual query and basically hangs.... I will attempt at opening an SR with Oracle...
the other option i'm looking at is checking the date ranges outside of xquery, and using a mix of xmltable, xmlexists and the SQL XML functions to reconstruct my xml.

How many photos are too many photos for iPhoto? When do I need to upgrade to Aperture?

How many photos are too many photos for iPhoto? When do I need to updgrade to Aperture?

Hi Terrence, this is what happens, all too often when I click on something, sometimes it takes me 5 more clicks on the mouse while moving the cursor around to get rid of it. The one below popped up as I clicked on my junk mail.
The next one popped up when I was trying to get on to a site. This happens all the time. Don't know why it is happening. It happens on iPhoto, Aperture, everywhere I go, FaceBook...everywhere and at any time. So frustrating. I don't know if this is normal, but this was happening just before my last mac died a year ago.

Access 2010 table has too many fields for web database - how to split into two web-compatible tables?

Similar Messages

Maybe you are looking for