Access 2013 - I can't export files to dBaseIV
Hi,
Access 2013 - I can't export files to sBaseIV, and i need this for mi job.
Can you help me please?
Thanks,
Regards
Thanks Dear!
Please, check my comment, may be can you help me.
See: http://jonwilliams.org/wordpress/2014/03/21/enabling-xbase-dbf-support-in-microsoft-office-access-2013/#comment-54026
Thank you so much.
Regards
Similar Messages
-
Post processing, I can't export files from the application to my hard drive. I keep getting this message " some problems ocured exporting your files" and gives me a list of all the files I was exporting. I also get just one option, to click "ok" how do you move files post processing, I'm using an iMac OSX 10.7.4. My LR4 is the trial version but I can't buy if it is not compatible with my system
Permissions?
-
Access 2013 crashed when I export a table from the access
Hi!
Access 2013 always crashed when I export a table from the access to the Database Symfoware.
1、The conditions of the Access 2013 crashed are the follows.
1)Create a table in the Access 2013.
2)Using the ODBC driver of the Database Symfoware to export the table from the access to the Database Symfoware.
2、The Environments are the follows.
1)Access 2013 X64(Version:15.0.4420.1017)
2)Win2008R2 X64
3)Symfoware V11.1 X64
3、The Application log from the Win2008R2 are follows.
ログの名前: Application
ソース: Application Error
日付: 2014/04/18 16:21:06
イベント ID: 1000
タスクのカテゴリ: (100)
レベル: エラー
キーワード: クラシック
ユーザー: N/A
コンピューター: WIN-29UTU2AIK6J
説明:
障害が発生しているアプリケーション名: MSACCESS.EXE、バージョン: 15.0.4420.1017、タイム スタンプ: 0x50674523
障害が発生しているモジュール名: ACECORE.DLL、バージョン: 15.0.4420.1017、タイム スタンプ: 0x506742b7
例外コード: 0xc0000005
障害オフセット: 0x0000000000171f36
障害が発生しているプロセス ID: 0xb6c
障害が発生しているアプリケーションの開始時刻: 0x01cf5ad638668c5b
障害が発生しているアプリケーション パス: C:\Program Files\Microsoft Office\Office15\MSACCESS.EXE
障害が発生しているモジュール パス: C:\Program Files\Common Files\Microsoft Shared\OFFICE15\ACECORE.DLL
レポート ID: 00e87957-c6ca-11e3-ad2c-0050568d2ced
イベント XML:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-04-18T07:21:06.000000000Z" />
<EventRecordID>3442</EventRecordID>
<Channel>Application</Channel>
<Computer>WIN-29UTU2AIK6J</Computer>
<Security />
</System>
<EventData>
<Data>MSACCESS.EXE</Data>
<Data>15.0.4420.1017</Data>
<Data>50674523</Data>
<Data>ACECORE.DLL</Data>
<Data>15.0.4420.1017</Data>
<Data>506742b7</Data>
<Data>c0000005</Data>
<Data>0000000000171f36</Data>
<Data>b6c</Data>
<Data>01cf5ad638668c5b</Data>
<Data>C:\Program Files\Microsoft Office\Office15\MSACCESS.EXE</Data>
<Data>C:\Program Files\Common Files\Microsoft Shared\OFFICE15\ACECORE.DLL</Data>
<Data>00e87957-c6ca-11e3-ad2c-0050568d2ced</Data>
</EventData>
</Event>
4、When the access crashed,I got the dump file .Then I use the Windbg got some information from the dump files.
The detailes are follows.
FAULTING_IP:
+58872faf03d6dd84
00000000`00000000 ?? ???
EXCEPTION_RECORD: 00000000001723c0 -- (.exr 0x1723c0)
ExceptionAddress: 000007fee3951f36 (ACECORE+0x0000000000171f36)
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: 0000000000000000
Parameter[1]: 0000000000000000
Attempt to read from address 0000000000000000
FAULTING_THREAD: 00000000000010b8
DEFAULT_BUCKET_ID: WRONG_SYMBOLS
PROCESS_NAME: MSACCESS.EXE
ADDITIONAL_DEBUG_TEXT:
Use '!findthebuild' command to search for the target build information.
If the build information is available, run '!findthebuild -s ; .reload' to set symbol path and load symbols.
MODULE_NAME: ACECORE
FAULTING_MODULE: 0000000076eb0000 ntdll
DEBUG_FLR_IMAGE_TIMESTAMP: 506742b7
ERROR_CODE: (NTSTATUS) 0x80000003 - {
EXCEPTION_CODE: (NTSTATUS) 0x80000003 (2147483651) - {
MOD_LIST: <ANALYSIS/>
CONTEXT: 0000000000171ed0 -- (.cxr 0x171ed0)
rax=0000000001be3598 rbx=0000000000000000 rcx=01cf5d1b0f402a5c
rdx=0000000009cfad30 rsi=0000000006688ef0 rdi=0000000001be35d0
rip=000007fee3951f36 rsp=0000000000172490 rbp=00000000001727a0
r8=0000000009b409d0 r9=0000000006688ef0 r10=0000000000000000
r11=0000000000000246 r12=0000000000000000 r13=0000000001be19f0
r14=0000000009cfad30 r15=0000000000000000
iopl=0 nv up ei pl nz na po nc
cs=0033 ss=002b ds=002b es=002b fs=0053 gs=002b efl=00010206
ACECORE+0x171f36:
000007fe`e3951f36 4d3927 cmp qword ptr [r15],r12 ds:00000000`00000000=????????????????
Resetting default scope
PRIMARY_PROBLEM_CLASS: WRONG_SYMBOLS
BUGCHECK_STR: APPLICATION_FAULT_WRONG_SYMBOLS
LAST_CONTROL_TRANSFER: from 000007fee395c095 to 000007fee3951f36
STACK_TEXT:
00000000`00172490 000007fe`e395c095 : ffffffff`ffffffff 00000000`00000000 00000000`01bddaa2 ffffffff`ffffffff : ACECORE+0x171f36
00000000`001727b0 000007fe`e388f8eb : 000007fe`e399dc10 000007fe`e399dc30 000007fe`e399dc50 00000000`000000f9 : ACECORE+0x17c095
00000000`00172b50 000007fe`e388f590 : 00000000`06688ef0 00000000`00000004 00000000`000000f9 00000000`00000000 : ACECORE+0xaf8eb
00000000`00172ba0 000007fe`e388f406 : 00000000`00000004 00000000`000000f9 00000000`11cb1130 00000000`000000f9 : ACECORE+0xaf590
00000000`00172c30 000007fe`e391aee7 : 00000000`00000000 00000000`00173198 00000000`06688ef0 00000000`11cb0998 : ACECORE+0xaf406
00000000`00172c70 000007fe`e3933a72 : 00000000`00400100 00000000`00000002 00000000`00000001 00000000`06688ef0 : ACECORE+0x13aee7
00000000`00172e50 000007fe`e384e5b1 : 00000000`00000000 00000000`11cb0020 00000000`06688ef0 00000000`00000001 : ACECORE+0x153a72
00000000`00172e90 000007fe`e38358d1 : 00000000`000007ff 00000000`06688ef0 00000000`01bd99f0 00000000`00000000 : ACECORE+0x6e5b1
00000000`00173280 000007fe`e38718eb : 00000000`000007ff 00000000`06688ef0 00000000`11cb0000 00000000`00000000 : ACECORE+0x558d1
00000000`00173340 00000001`3f3b0cd2 : 00000000`0a0945c0 00000000`000000fe 00000000`000007ff 00000000`00000000 : ACECORE+0x918eb
00000000`00173430 00000001`3f3b0b9b : 00000000`00173730 00000000`001741e0 00000000`065e5b00 00000000`00000100 : MSACCESS!CreateIExprSrvObj+0x16af32
00000000`00173630 00000001`3f3afcea : 00000000`00173730 00000000`00000000 00000000`00000000 00000000`065e5b00 : MSACCESS!CreateIExprSrvObj+0x16adfb
00000000`001736a0 00000001`3f983140 : 00000000`00174401 00000000`0a3235e0 00000000`0a319aa0 00000000`00179fc8 : MSACCESS!CreateIExprSrvObj+0x169f4a
00000000`00174290 00000001`3f3aabeb : 00000000`00000000 00000000`00000000 00000000`00179f38 00000000`00000000 : MSACCESS!FUniqueIndexTableFieldEx+0x26ab4
00000000`00174530 00000001`3f3a9670 : 00000000`001778e0 00000000`00179f38 00000000`00000031 00000000`00000000 : MSACCESS!CreateIExprSrvObj+0x164e4b
00000000`00177870 00000001`3f3a8c1b : 00000000`00000010 00000000`108c5990 003d0044`00570050 00000000`74ac3f69 : MSACCESS!CreateIExprSrvObj+0x1638d0
00000000`001779d0 00000001`3f5450df : 00000000`0a0945c0 00000000`0000009c 00000000`0a0945c0 00000000`00000000 : MSACCESS!CreateIExprSrvObj+0x162e7b
00000000`00179e30 00000001`3f64e915 : 00000000`43ed8000 00000000`00000000 00000000`3f800000 00000000`00000000 : MSACCESS!FillADT+0x5830b
00000000`0017c450 00000001`3f33b172 : 00000000`00000000 00000000`0006075e 00000000`0017e370 00000000`00000000 : MSACCESS!IdsComboFillOfActidIarg+0xaddf1
00000000`0017d730 00000001`3f33a9ef : 00000000`0017e0a0 00000000`00000b86 00000000`00000000 00000000`0fea0000 : MSACCESS!CreateIExprSrvObj+0xf53d2
00000000`0017d790 00000001`3f33a20c : 00000000`06620400 00000000`00000000 00000000`00000001 00000000`0017e420 : MSACCESS!CreateIExprSrvObj+0xf4c4f
00000000`0017e400 00000001`3f6019cd : 0071023b`007a000a 00000000`00374a30 00000000`00000005 00000000`0000000c : MSACCESS!CreateIExprSrvObj+0xf446c
00000000`0017e850 00000000`06706fd5 : e2504700`aa00ee81 00005d1b`0f2363ea 00000000`0017e9e0 00000001`3f200000 : MSACCESS!IdsComboFillOfActidIarg+0x60ea9
00000000`0017e8f0 00000000`0a30c378 : 00000000`00000000 00000000`00000008 00000000`067069ac 00000000`00000000 : 0x6706fd5
00000000`0017e960 00000000`00000000 : 00000000`00000008 00000000`067069ac 00000000`00000000 00000000`00000008 : 0xa30c378
FOLLOWUP_IP:
ACECORE+171f36
000007fe`e3951f36 4d3927 cmp qword ptr [r15],r12
SYMBOL_STACK_INDEX: 0
SYMBOL_NAME: ACECORE+171f36
FOLLOWUP_NAME: MachineOwner
IMAGE_NAME: ACECORE.DLL
STACK_COMMAND: .cxr 0x171ed0 ; kb
BUCKET_ID: WRONG_SYMBOLS
FAILURE_BUCKET_ID: WRONG_SYMBOLS_80000003_ACECORE.DLL!Unknown
WATSON_STAGEONE_URL: http://watson.microsoft.com/StageOne/MSACCESS_EXE/15_0_4420_1017/50674523/unknown/0_0_0_0/bbbbbbb4/80000003/00000000.htm?Retriage=1
Followup: MachineOwner
5、Where the access crashed I used the ODBC trace to get the trace log of the ODBC API.
The ODBC API called by Access before it crashed are the follows.
I also ansysised the log,and I did not find any Abnormal.
Test 1174-10f0
EXIT SQLGetData with return code 0 (SQL_SUCCESS)
HSTMT 0x0000000009F7C490
UWORD
6
SWORD
-8 <SQL_C_WCHAR>
PTR 0x00000000002C1F20 [
12] "LENGTH"
SQLLEN 62
SQLLEN * 0x00000000002C1E38 (12)
Test 1174-10f0
ENTER SQLGetData
HSTMT 0x0000000009F7C490
UWORD
10
SWORD
99 <SQL_C_DEFAULT>
PTR <unknown type>
SQLLEN 4
SQLLEN * 0x00000000002C1E38
Test 1174-10f0
EXIT SQLGetData with return code 0 (SQL_SUCCESS)
HSTMT 0x0000000009F7C490
UWORD
10
SWORD
99 <SQL_C_DEFAULT>
PTR <unknown type>
SQLLEN 4
SQLLEN * 0x00000000002C1E38 (-1)
Test 1174-10f0
ENTER SQLFetch
HSTMT 0x0000000009F7C490
Test 1174-10f0
EXIT SQLFetch with return code 100 (SQL_NO_DATA_FOUND)
HSTMT 0x0000000009F7C490
Test 1174-10f0
ENTER SQLFreeStmt
HSTMT 0x0000000009F7C490
UWORD
0 <SQL_CLOSE>
Test 1174-10f0
EXIT SQLFreeStmt with return code 0 (SQL_SUCCESS)
HSTMT 0x0000000009F7C490
UWORD
0 <SQL_CLOSE>
6、I also did the test with the Access 2010,and with the Sql Srever/Oracle.
The results are the follows.
1) With the Access 2010(X86 or X64) and Access 2013 X86,it successes when I export the table to the DB Symfoware.But only with the Access 2013 X64,the Access crashed.
2)With the Access 2010(X86 or X64) and Access 2013(X86 or X64),using the Sql Srever/Oracle,it always successes .
According to all the descrived above, I wonder if it a bug of the Access2013 .
Could anyone can help me ?
Thanks for any help.George Zhao
Thank you for your help.
I have already install
the latest patches of the Office 2013.But it doesn't work.It is down also too. And ODBC
drive of Database Symfoware is the newest driver of the Database Symfoware. Now I wonder that
if it si a bug of the ODBC
drive of Database Symfoware,I should fix the bug,but I have analysised the odbc trace log and I do not find any wrongs ,so I think maybe it is a bug of the Access .
I have see many situations about the Access down on the internet . -
Can I export files in mp3 format?
Can I export an audio file in the mp3 format?
http://help.apple.com/logicpro/mac/10/#lgcp8314da07
-
I'm trying to export the files that exist on an ipod classic. It belongs to my girlfriend, and she doesn't want to lose any of the music on it. But she wants to sync to a new PC and not lose the content. So, I want to export all the files and then place those files plus start a new itunes library with it. If I were to sync to my PC, would it erase all of the existing data? Can I buy/download a program that would allow me to upload all of the existing content on her ipod classic to my PC and then take that and place it back on by syncing it through her new laptop and adding the exported files....?
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock -
I just shelled out 30 duckets for the pro version to convert files to view in my new ipod nano. It will not convert files properly. The files are .flv type, when I click to export it opens box saying file already exists. then I check no to write a new file and it converts to a very small 60 - 80 mb file. I have tried every documented way from quick time and web advice and this will not convert a file.
I have found a free version after, I purchased the $30 version, and the free one works.QuickTime can't work with Flash Video without third party software help.
-
Can't export file as pdf?
trying to export idd cs6 file as pdf and get message "cannot save to the file... you may not have permission or the file may be in use. I tried closing the idd file but then cannot save -- catch 22!!!
In a situation where you cannot save the file and close it you can try and export to .idml (see Remove minor corruption by exporting) and if that also is unsuccessful, try a force quit on ID, then restart ID and hope the autorecovery works. You really haven't got anything left to lose at that point, and you have some chance for recovery on the force quit where cloing without saving loses all your changes.
-
Labview 2013 + Windows7, can't add file to llb
Very simple, I am trying to add VI file to LLB but instead of that Labview is trying to save VI file as LLB.
New feature of LV2013? LLB's are not displaying as folders anymore? Bug?Hi,
Could you possibly add the LLB file and the VI to a project? Then drag the VI in the project into the LLB and save the LLB.
Kind Regards,
Laurence C.
Senior Test Development Engineer
Dyson Ltd -
Hi,
I am using UTL_FILE.FOPEN_NCHAR and utl_file.PUT_line_NCHAR to write files in Unicode but instead it is exporting in UTF8 format, my database characterset is UTF8, it might be happening due to characterset.
Can i export files in Unicode rather in UTF8.
Thanks
ZubairI think you must reverse the parameters it's destination first the source is optional
Regards
Etbin
Looking at 11g documentation: http://docs.oracle.com/cd/E11882_01/appdev.112/e25788/u_file.htm#autoId0
FOPEN_NCHAR Function
This function opens a file in national character set mode for input or output, with the maximum line size specified. You can have a maximum of 50 files open simultaneously. With this function, you can read or write a text file in Unicode instead of in the database character set.
Even though the contents of an NVARCHAR2 buffer may be AL16UTF16 or UTF8 (depending on the national character set of the database), the contents of the file are always read and written in UTF8. <font color="blue">UTL_FILE converts between UTF8 and AL16UTF16 as necessary.</font>
I'm not sure what the last statement means (no Database at hand to try it, besides the usual procedure is not to do it row-by-row but to obtain a clob which gets written out in 32767 byte chunks)
Edited by: Etbin on 26.2.2012 9:13 -
How can I export a Oracle DB table or a Query Result to an mdb (MS Access) File ?
Hi,
I would like to export a particular table or a particular data subset (result from a SQL query) to a MDB file, I tried with Oracle SQL Developer but I cannot see mdb as a possible export option.
How can I do to export data to a mdb file ? I'm currently using SQL Developer on GNU/Linux, can you suggest me a link or a tool to do such things ?
I consider an acceptable solution also to use SQL Developer to export data in a certain format and then use another software to open that format and create an mdb. What do you suggest ?Open the (an) MS Access database and:
1) Click on File -> Link tables -> Select ODBC Database(s)
2) On popup window select (or create new) "Machine Data Source" -> Oracle Driver -> Select the TNS alias (service name)
Good luck! -
InDesign CC, can't export to html, can't access unneeded file
In the latest build of InDesign CC (July 2014), the export process to HTML has changed. You used to be able to export a book directly to filtered HTML files. Now the option is no longer in the Book menu, and you must go through the main menu, which does not allow filtered HTML option. I keep getting a crash when I open the resulting HTML file, "Can't access .jar file from SiteBuilder,"--a Yahoo HTML creation program, which I formerly used. The book file contains only embedded jpg photo files and InDesign documents for chapters, but it calls for this unrelated and unconnected .jar file. Also, It is impossible to choose the "From Selection" option, only the "From Document" option, so I can't export the whole book into HTML, which previous versions enabled me to do.I'm stuck, and now Adobe has stopped offering phone support to subscribers. After wasting a whole day on this single issue, I'm fed up. Is it time to scrap InDesign? Also, how do you edit an e-pub file created by InDesign? (It misplaces the photo captions) Dreamwdeavce should be able to do it, but I can't figure out how. Any help would be appreciated. Peter
Export the file from ID as an .idml file and open that resaving as an.indd file with a new name. That should strip out the reference to the unused file.
-
How can I export the query result into access(*.mdb) file?
Dear all:
I want to export the query result displayed in jsp into excel file
and access file. And I have exported the result into excel format successfully, only one line should be added in the head of Jsp:
<%@ page contentType="application/vnd.ms-excel; charset=gb2312" %>
But how can I export it in access(*.mdb) file? I have replaced "excel"
with "access". But it can't achive my goal.
What should I do to achieve my goal?
Thanks!The only reason your Excel export works is that Excel knows how to interpret comma separated values as an input file format. Access has no such beast.
If you absolutely must provide info in an mdb, one solution would be to create an ODBC datasource pointing to an empty mdb, then push data into it using the jdbc:odbc bridge, then make a copy of the file and stream it down to the browser. You may run into some ugly file locking items here - set the ODBC connection so it is not shared, and that might help.
This one is going to be ugly.
I suppose another approach would be to write a simple VB applicatin that uses automation to create an MDB, then stream that file down to the browser from your servlet. That would almost certainly be faster than the ODBC approach.
- K -
Can an Access 2013 accdb file be encrypted using command line switches?
Can an Access 2013 accdb file be encrypted using command line switches?
I found all the command switches, but nothing about encrypting. And I've searched online and found nothing.
Can this be done?
Thanks!Hi Sharon2000,
I think you could try the Database.NewPassword Method (DAO) in the VBScript file, and you could get more information about it from the link below:
#Database.NewPassword Method (DAO)
https://msdn.microsoft.com/en-us/library/office/ff844754.aspx
Here is a simple demo to achieve your issue.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey. -
Hey guys, my question is how can I export midi files from new garageband 10/ 2013? Thanks
77music wrote:
how can I export midi files from new garageband 10/ 2013?
unfortunately, like the previous 6 versions of GB, MIDI export is not supported. you would need to open the file in Logic in order to do that -
Can't Edit Data in Access 2013 Web App
I have an Office 365 P1 account that I have been using to create apps in Access 2010. I tried Access 2013. But when I launch an app, it loads in my Office 365, but editing data is not enabled (the Add and Edit buttons are displayed, but not enabled).
I have tried creating a new custom web app with one simple table and a view, as well as creating one using a Microsoft pre-built template, and simply creating the app and launching it. In both cases, the app displays, but I cannot add or edit data.
Is there something with my Office 365 account that is limiting my ability to work with Access 2013 web apps?
Thank you!Hi KrisMarshall7,
In regarding of the issue, please provide us more information to assist you better.
What the file format is your Access 2007 file? MDB or ACCDB?
Where do you want to add the columns? Table, form or query?
As far as I know,
the limitation of columns in a table is 250. Thus, I suppose that the database had some hidden columns. Please try to check it. Steps:
Right-click any field title, then select Unhide Fields. A dialog box will appear. Click the check boxes of any fields you would like to be visible again, then click Close.
Hope it's helpful.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Maybe you are looking for
-
i just bought a panasonic 50" plasma tv model TC-P50X3 and i want to connect my macbook pro with my new ty how do i do that?
-
How to populate COPA fields for GL posting using BAPI_ACC_DOCUMENT_POST
Hi All, I am posting documents in FB50 using BAPI_ACC_DOCUMENT_POST. I have a requirement to post the documents with profitability segment parameters as well. Should I use EXTENSION1 table to pass COPA updates and implement BTE to achieve it? Can any
-
We have a servlet that gets called with a set of parameters. I want to set one of those parameters within my XSL extensions so that it is retrievable from the XSL code. Because the extensions are static and used by all XSL transforms, they are not th
-
HT4539 Automatic download from from iPhone 5 to new iPod touch
I already have an iPhone 5 and I just bought an iPod touch. I switched on the automatic download for the App Store from the settings for the iPod touch but after downloading some new apps to my iPhone they still didn't not automatically download on
-
ITunes Library relocation from mac to windows
Hi All, So my 3 year old iMac G5 died about a week ago (failed logic board). I wanted to know if i can relocate my itunes library to my windows machine. Now, i've copied the entire library to the win-doze and did the "new library" feature by holding