Access 9i Forms from Mac OSX

Is it possible to access 9i Forms from a Mac running OSX?
Everything we've tried results in the following message:
java.lang.ClassNotFoundException:Oracle.forms.engine.Main

Hi Jagad,
I had the similar problem. But error message was "Failed to establish RDG/HTTPS out channel". I was able to solve it using an earlier version of Microsoft Remote Desktop. I found it on this link:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/aef18b12-7785-46b2-958d-0bbbef78aede/unable-to-connect-after-update-to-8013?forum=winRDc
Also at the forum, there are other branches with similar problems:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/139a6d57-055a-420c-8e54-1fa398106a04/version-8013-build-25377?forum=winRDc
Check the version of Microsoft Remote Desktop, you are using for remote. If the version number is 8.0.13, then you have the latest version, which was released on 04.02.2015. It is believed that this version contains errors. And I can confirm this too. If earlier
you able to remote from your Mac to your windows 8.1, so you need to try to restore an earlier version of Microsoft Remote Desktop.
Best regards,
Alex

Similar Messages

Why can't i access Pages on my mac osx Maverics version 10.9.5. Do i need to upgrade to Yosemite?

Why can't i access Pages on my mac osx Maverics version 10.9.5. Do i need to upgrade to Yosemite? I was using it yesterday just fine.

Go step by step and test.
1. System Preference > Sound > Output > Internal Speakers
    Highlight Internal Speakers / Headphones
    Make sure that Mute is not enabled.
2.Plug in and remove the headphone.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
    Try this even if you don’t see the red light.
3. Reset PRAM. http://support.apple.com/kb/PH14222
    Do this twice
4. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the appropriate method.
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
5. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
    Side Bar
    Click the Built-in Output.
     Make sure that no box is checked under “Mute”.

Trying to update from Mac OSX 10.7.2 to 10.7.4 via the Updater. Update Not Verified?

Trying to update from Mac OSX 10.7.2 to 10.7.4 via the Updater. Getting a message half way through the download stating the updated "could not be verified. It may have been corrupted during downloading." Any ideas for picking up the latest Update?
Uploading screenshot.... any advice appreciated.
Matt

Either try redownloading or try downloading the standalone updater: OS X Lion Update 10.7.4 (Client Combo).
Such errors may be caused by glitches in your Internet connection or because of hard drive problems. I suggest you try the following:
Repair the Hard Drive and Permissions - Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the main menu. Select Restart from the Apple menu.

Can I upgrade from mac OSX 10.6.8 to 10.8?

Can I upgrade from mac OSX 10.6.8 to 10.8?

Same list as stedman1, but uses model numbers which is slightly more accurate.
Check that your computer is compatible with Mountain Lion.
To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
iMac (Mid 2007 or newer) model number 7,1 or higher
MacBook (Late 2008 Aluminum, or Early 2009 or newer) model number 5,1 or higher
MacBook Pro (Mid/Late 2007 or newer) model number 3,1 or higher
MacBook Air (Late 2008 or newer) model number 2,1 or higher
Mac mini (Early 2009 or newer) model number 3,1 or higher
Mac Pro (Early 2008 or newer) model number 3,1 or higher
Xserve (Early 2009) model number 3,1 or higher
Your Mac needs:
OS X v10.6.8 or OS X Lion already installed
2 GB or more of memory (More is better)
8 GB or more of available space
Check to make sure your applications are compatible. Application Compatibility
If you have applications that you want to use that aren’t compatible, you can retain Snow Leopard and create a new partition to install Mountain Lion on or you can run Snow Leopard server in a virtual mode.
If your computer isn't compatible, you might be able to upgrade to Lion. Computer Compatibility - Lion
If you can/do upgrade, I recommend you make a copy of the installer and move it out of your Applications folder. The installer self-destructs. The copy will keep you from having to download the installer again.

HT203031 I've got service receipt form from MAC Center Thailand, but it has no Repair ID. Just only has Service No. and Serial No.

I've got service receipt form from MAC Center Thailand, but it has no Repair ID. Just only has Service No. and Serial No.
Please tell me more, how do I get a Repair ID of my iPhone 5, I need to check repair status.
Thank you.

Okay I fixed it on my own by reconfiguring Xorg with a new mouse.
If anyone else somehow encounters this problem in the future, it seems like there isn't a driver for the Microsoft Wireless Optical mouse. If there is one, it doesn't come with the basic installation. Though, the keyboard works fine. The new mouse I got was a PS/2 Optical three-button mouse. It's pretty much your generic computer mouse.

I am trying to access tax forms from the IRS. I download them to my comuter and they read fine (version XI). However, when iItry to open them on another computer (version 4) they will not open. Version 4 opens all other documents fine, just no the ones

I am trying to access tax forms from the IRS. I download them to my comuter and they read fine (version XI). However, when iItry to open them on another computer (version 4) they will not open. Version 4 opens all other pdf documents fine, just not the ones from the IRS. Any ideas?

Version 4 is oh so old.
The IRS and many other providers of forms are using products like LIveCycle which require at least version 7.05.
Saving, Filling, and Printing PDF Files
We use Adobe Acrobat PDF files as a means to electronically provide forms & publications. You will need to have the Adobe Reader software installed to access them (available FREE from the Adobe Reader download page on Adobe's Web site). We recommend using the most recent version of Adobe Reader.

Problems accessing iTunes store with Mac OSX 10.4.11

I am trying to access the iTunes store using Mac OSX 10.4.11 but it tells me to download the new version of iTunes. When I try to do that it says that the new version of iTunes is not supported by 10.4.11. What am I doing wrong? Do I actually need to buy the upgrade from 10.4.11 in order to buy stuff from iTunes again.
Thanks

Try using iTunes 9.2.1.
(58566)

Cannot go to the Internet from Mac OSX, and Fedora Core 5

All Windows users (XP, 2000, Vista Beta) can connect to the Internet no problem on WRT54G with Firmware v4.20.6 (may 26, 2005). But odd enough, though getting the right DHCP assigned IP addresses and DNS server address, MacBook Pro (OS 10.4.1) and Fedora Core 5 cannot go to the internet at all using Safari and firefox browsers: the message keeps saying that your computer is not connected to the internet. Tested with BOTH wired and wireless connections, no luck to the internet. So, it's not about the wireless settings and setup. It doesn't work even if I directly connect the CAT5 cable to the router port.
Tested at wireless hotspots, at work where we have Cisco access points, and at a friend's place where there is netgear wireless router, MacBookPro is just working fine connected to the internet.
Any suggestions? Linksys doesn't support Mac and Linux PCs at all?

Thank you very much All (devildance, and Frank).
Seems like it is working fine now...
I reset the router as factory default, and reconfig the wireless setting(disable broadcasting SSID, configure TKIP PSK, and MAC filtering). Directly connected CAT5 cable from the router to my MacBookPro Windows XP. Working fine. Switched to Mac OSX, working fine. But, when I disconnected the LAN, and attempted to connect wireless, I couldn't go to the Internet using Safari and Firefox: keeps saying that your computer is not connected to the Internet.
Still could ping to 4.2.2.2 and 207.232.22.25, but getting errors "could not resolve the host name" when I pinged with the hostname bearshare.com.
Connected the wired CAT5. Working fine. Unplugged and used the wireless, could not get to the internet.
Checked the NICs settings on both LAN ethernet and wireless airport. All seems the same and correct: IP address, subnetmask and gateway address, and NO DNS entry. The same settings, but works on LAN cat5, and not works with wireless. So, for the sake of it, just manually added the DNS server IP addresses and domain names on wireless NIC. And Wala...it is working fine with wireless. Still strange the fact that Ethernet LAN NIC still doesn't have any DNS entries and working fine, but required DNS entries on wireless NIC.
For Fedora Core, could ping and resolve names without changing any settings. But when going to the Internet, got the error saying "comcast doesn't support this platform/OS" and another error "Welcome to Comcast High speed Internet....registration currently unavailable" when attempting to go any websites. Notieced that we pinging cnn.com, bearshare.com, or any websites, got ping reply from the same IP address which appears to be one of the comcast DNS server IP, 68.87.64.132.
So, I think it is a comcast issue not supporting Linux or something else which I would need to call to Comcast about...
But, thanks...looks like I can go to the Internet on Mac OSX, and Fedora core now with Linksys WRT54G. Thanks so much guys for all the suggestions....

Forms9i from Mac OSX

Hello,
Is anyone has an experience with runing Forms9i on a Mac OSX system ?
Thanks in advance.
Francois.

I've been able to get test 10g/10gAS webforms to run on Mac OS X (Safari, IR, and Netscape 7.2) using the following configs from the FORMSWEB.CFG file.
As always, this is an unsupported configuration (though Oracle has been promising certification for close to two years now). Your mileage may vary.
Dave
[testmac]
# *************** TESTMAC ********************
serverURL=/forms90/l90servlet
codebase=/forms90/java
archive=f90all.jar
form=h:\apps\dev10\exe\timer.fmx
lookandfeel=Oracle
colorScheme=blaf
separateFrame=False
width=799
height=572
basehtml=base.htm
# *************** END TESTMAC ****************
[testmacie]
# *************** TESTMACIE ********************
IE=native
serverURL=/forms90/l90servlet
codebase=/forms90/java
archive_ie=f90all.jar
form=h:\apps\dev10\exe\timer.fmx
lookandfeel=Oracle
colorScheme=blaf
separateFrame=False
width=799
height=572
baseHTMLie=base.htm
# *************** END TESTMACIE ****************

Problems to download music from Mac OSX 10.4.11 to iPhone 4

Hi to you all
Since few days I am an owner of an iPhone 4. And also I have Mac with OSX 10.4.11 at home. Well, if I connect my iPhone to Mac to synch music from Mac to iPhone 4, the iPhone get not recognized and I am therefore not able to get my music from Mac on my iPhone.
During update on Mac, I got the error message on OS is telling "Installing iTunes.pkg could not completed, this package needs Mac OSX 10.5.
If I search on Mac for new update, it says "your system is updated and there is no other update available"
With other words, I can not get higher release on Mac why I am not able to get a new version of iTunes on Mac and therefore why I am not able to synch my music from Mac to iPhone. Very frustrating.
Any advise is welcome.
Thank you.

You will need to upgrade your version of OS on your Mac. You will need Leopard (10.5.8) or Snow Leopard (10.6.X)
Stedman

Mirroring from mac(osx 10.8.2) extremely slow

Hi there,
Im having problems using Airplay from Mac. I have OSX 10.8.2
Apple tv latest gen updated to the latest firmware.
When i trying to activate Airplay on my macbook air (1.7 Ghz, core i5) it takes ages to stream it to the tv.
Airplay shows that is active on the mac screen, but apple tv remains blank... then 5 min after i can see a fix frame ... etc...
Simultaneously if i go to my Ipad (3rd gen), streaming videos and youtube works flawlesly, but if i try to mirror a game or try to play a song it get extremely slow....
Any thoughts?
My router is a Linksys E3200 and im using a 5ghz wireless network.
thanks!

hi everybody
I really need some help so here is a little up !
thanks !

Round trip export/import from Mac OSX iCal

Since there isn't an iSync plug-in for Oracle Calendar (yet?) I thought I'd try a round-trip import/export between Oracle Calendar and Mac OSX iCal. Inconvenient, but it should would because the UIDs in the .ics file would be the same and an import would overlay over the existing entries.
Wrong -- if I export an event from iCal, import it into Oracle Calendar, then export it again and look at the .ics file, the UID is different. Consequently, I get duplicate entries at the end of the round trip.
What good is the "U"-Unique of UID if it isn't kept consistently? From the standard: "Implementations MUST be able to receive and persist values of at least 255 characters for this property."

I've ran into an issue when exporting/importing a .csv file from OSX.And this "issue" is...?
Exporting from? Importing to?
APEX version?
Database version?
Database character set?
Database host OS and version?
EPG, OHS or OAS (and version)?
DAD character set (if any)?
OS X version?
Some, none or all of the above may or not be relevant, but without more information to go on, all you are going to get are random guesses.
http://tkyte.blogspot.com/2005/06/how-to-ask-questions.html
http://catb.org/~esr/faqs/smart-questions.html

Help! Can't start up from Mac OSX 10.0.4

I’m hoping someone can help me with a problem. I have an Apple G-4 computer. When I originally purchased it 3-4 years ago I believe it came with OS 9.1 and OSX installed. Both worked fine when I first got it. Through the years I upgraded the OS to 9.2.2 and haven’t used OSX since the first time I purchased the computer.
Well, I went out an purchased a digital camera which only works with OSX. So I switched the start up disk to OSX and re-started the computer. No OSX, only a gray screen with wording, letters and numbers that are highlighted. Some of the wording is as follows: “panic unable to find driver for this platform”, no debugger configured-dumping debug information”, panic we are hanging here”.
So I re-started from the CD, switched to OS 9.2 and restarted. I then removed the OSX system from my computer. I then re-installed OSX again and tried to start from it, but the same thing happened. I’m not sure if it has any bearing, but I noticed in the startup disk, Mac OSX 10.0.4 has next to it (Build 4Q12). Not sure what it means or if it’s suppose to be there.
Sure would appreciate some help here. Thanks much.
G-4 Mac OS X (10.0.x)

10.4 will work on your machine as long as you upgrade the firmware first.
Follow my upgrade tips when installing:
http://www.macmaps.com/upgradefaq.html
I would add the person who has the least trouble upgrading to X, goes to it cold turkey. As you are suggesting only to do so for your digital camera, I'm not sure if you really are ready to go to X. I'd get all your software upgraded to X versions before going to X purchased, and then you'll be able to work it out. I've also written this FAQ on migration:
http://www.macmaps.com/macosxnative.html
Disclaimer: Reference to links I make to my Macmaps.com website are a for your information only type reference. I do not get any profit from this page, and it is open to the public.

How can I delete LogMein from mac osx

How can I deltee LogMein from my Mac OSX computer?

The link above is no longer appropriate!
If you are running a current version of Logmein i.e. 2013/2014 you need to do the following:-
1. Open the Logmein control panel
2. Click About
3. Click Unistall button.
Thank you--this was just what I needed to uninstall LogMeIn from OS X 10.9.2. I only wish there were a way of making your solution more prominent.
David

Music will not transfer from Mac (OSX 10.9.3) to iPhone via cloud

Music will not transfer from my Mac (OSX 10.9.3) to my iPhone except for music purchased through iTunes. Hard sync doesn't seems to work as I use iCloud. Suggestions?

Only music purchased from the iTunes store is available to download from iCloud unless you subscribe to iTunes Match. Also, you can sync music using iTunes on you Mac even if you are using iCloud for syncing your contacts, calendars and other data.

Access 9i Forms from Mac OSX

Similar Messages

Maybe you are looking for