Access a Business Partner by passing the URL
Hi Nicolai,
please try my answer in this threat:
[Re: Send weblink of account in email|Re: Send weblink of account in email]
Kind regards
Manfred
Hi Manfred,
thanks for the Answer. By trying this link http://server:8000/sap/bc/bsp/sap/crm_ui_start/default.htm?crm-object-type=BP_ACCOUNT&crm-object-action=B&crm-object-value=myID&crm-object-keyname=PARTNER&saprole=myRole i get a message "crm_ui_start" can not be found. I changed "crm_ui_start" to "crm_ui_frame" and it was working. But if i am trying to pass another id i see the default.html page again. I hope you can help me
Edited by: Nicolai Zaidman on May 26, 2010 6:00 PM
Similar Messages
-
'Business Partner Assigned to the User' Access Sequence don't work
Hello.
I use access sequence 0008 (Business Partner Assigned to the User) in my Partner determination procedure. But it doesn't work. Corresponding Partner field in service document is empty. But I need that BP linked with logon user filled it.
I've made the same settings on another incstanse of SM and it's work. And what the difference between I don't understand.
Edited by: Dmitry Udot on Feb 13, 2011 2:31 AMSorry, but I don't quite get it. My purpose is to have 9 policies all working all the time (they did at in one version of firmware). I don't care about time entries for these. All 9 policies are full of keywords and websites to block webpages related to porn to one degree or another. The 10th policy is time-based to prevent internet access altogether for one or two computers through the wee hours of the morning. This, all in leu of having no parental controls.
Again, it would help if there was more detailed documentation on how this all works. This is the first I am aware that time settings in one policy could affect or impede the operation of other policies. How am I supposed to know this?
In any case, I appreciate your assistance and looking into this for me. But can you now tell me how to make it work so the policies will work as I want - the first 9 around the clock all the time, and the 10th one only from 1:30 am to 8:00 am (every day). Please instruct me on how I am supposed to configure this to work, and what specific settings I am supposed to enter... if it is even possible. Or is there another way of accomplishing this on my WRT54G (Rev. 2) product? Thanks.
Perry -
CICO - Business Partner details of the account selected not appearing
Hi,
I am a R/3 Basis consultant and I am not much aware of the functionality of the transaction CIC0. The User is facing an issue while accessing transaction CIC0 - Customer Interaction Center. The User first clicks on yellow arrow near the search string and provides the contract account in the prompted screen.Presses "Enter" for three times and gets the invoice details. Under Invoice selects the bill, double clicks on it and presses "End Contract" to clear data. Now the first screen appears and again he continues as earlier. But this time he clicks on yellow arrow on search string, provides different contract account number, presses "Enter" button. But nothing appears even he presses "Enter" button n times.It doesnt moves to Business Partner details of the account selected. It always works for the first entry and does not work from the second entry. Even if the enter key pressed for n times, the text boxes are not automatically populating the relevant information. There was no any change in GUI Version. But seems to be there was a upgradation in Desktop Version GI-Desktop from 1.8 to 1.9. Since then this issue is occuring for all the users. Is it because of this upgradation or any of you have come across this scenario earlier. Please advise on this issue as I need to resolve this issue at the earliest.
Thanks in advance for any valuable inputs which will resolve this issue.
Regards,
ShahulYou have a few options: execute a customer change or use the account holder functionality, or reverse all transactions and redo with correct partner.
The account holder would enable you to keep the account number, but it only allows you to add a new business partner as related. You cannot remove the current business partner relation, and thus might not be appropriate.
The customer change process moves the contracts and account from one bp to another. This will result in a new account number.
Lastly, you can reverse the bills and moves, and then re-execute them with the correct bp.
regards,
bill. -
Creation of Business partner by using the vendor master
Dear all ,
I have a requirement as follows. I Have already vendor master created in MM .Now the requirement is while creating Business partner I have to use this vendor as the business partner .
Can experts suggest the possibility of this .
Regards.
Arjun.Hello Arjun,
Yes, this feature also works in 4.7. What has happened is that in ECC 6.0 the BP functinality has been totally redefined with a lot of automations. As such, if properly configured then in ECC 6.0 there is no practical use of the FLBPD/FLBPC Tcodes. However, in 4.7, both these traqnsactions should be working fine. The SAP ntes that I have mentioned are however only for ECC 6.0.
Kind regards,
Suvarghya Dutta
Edited by: Suvarghya Dutta on Nov 27, 2008 4:02 PM -
Wrong business partner entered in the transaction
Hi!
Wrong business partner was used in securities contract and so many postings like valuation has already been executed/posted. Is there a transaction that would allow me to change the business partner used? Or should I perform migration steps by creating new contract?
Would appreciate your suggestion on what's the best way to correct the wrong BP.
Thanks,
ChaikaruHi,
Definitely you have to reverse the old transaction, else position show wrongly, and you are forced to reverse valuation as the positions are locked for that key date once valuation is performed, and it is locked with each date as and when you perform valuation. Otherwise, the cash flow managment (TPM13) much capable to adjust the cash flow dynamically once you change any previous period transaction data. So no need to reverse other flows, but to be in the safer side by taking back up of existing flows details to compile the new cash flow after changing the transaction.
If your wrong transaction belongs to long back, better to convince the customer to make a note of that and proceed further without changing it, instead of unnecessary reversals & rectification.
Regards
Prasad AV -
No Business Partner name in the general note of a DSWP-issue
End user has been created within a CUA-sytem and distributed to the SSM-system. Subsequently the Business Partner BP has been generated in the SSM-system succesfully with the tcode bp_gen. The BP has been attached in the organization model succesfully using tcode pposa_crm. However, the Holder name does not appear at the left lower Holder column. After some investigation it appears that the fields HRP1000-SHORT and HRP1000-STEXT of the Central Person are not filled. Hence, no Business Partner name appears in the general note of DSWP-issue and therefore different to trace who has done what. What can be the cause of this issue?
Just for the record...
It appears that in some cases the Title-field was not filled in the CUA-system. Therefore this field was not transferred to the SAP Solution Manager system. The problem has been solved by entering a value in the 'Title'-field of the Business Partner [/nbp] - the Holder name in the organisational unit appears again. -
How to update the business partner title using the function module
Hi ,
I have to update the business partner title to Mr or Ms based on the gender.
If BP is male title should be updated as Mr else Ms.
Please provide some inputs on which function module to use to do it in mass update.I have to search the BP's whose title is not created and i have to change those titles to Mr or Ms.Hello,
Try with BBP_USER_CHANGE_FIELDS :
- set CHANGE_FORM_OF_ADDRESS,
- put corresponding key you want (see TSAD3 table) in FORM_OF_ADDRESS_KEY.
Regards.
Laurent. -
I can't see what I am typing in the URL bar. Maybe 5 characters are visible an a time. The Translator Bar Covers over half of the open window.
Mozilla hasn't changed anything like that in Firefox 3.6.x versions, which is getting security patches but not any further development of new or existing features. Plus, Mozilla doesn't install anything related to Yahoo, something else probably installed that.
Please provide a screenshot of what you are talking about. <br />
https://support.mozilla.com/en-US/kb/Adding+screenshots <br />
There was a feature similar to what you are describing, that was in and out of the Firefox 4.0 betas last fall, but the 3.6 versions never had anything remotely like what your description has me visualizing.
Ate you sure that one of your add-ons isn't doing that? <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes -
Hi
In the receiver SOAP Adapter I got to send the Target URL ( Connection Parameters.....> Target URL) dynamically on the basis of URL that I get from payload. Is it possible to do this by using UDF ?? If so could you plz explain how we can do this ?? Plz point me it there are any materials/blogs/threads available on this topic ??
Regards
kumarHi palnati
you can use Adapter Specific Identifiers and set the SOAP URL and SOAP Action dynamically.
Here is the link for doc which can help u out :
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d23cbe11-0d01-0010-5287-873a22024f79
look this thread also
Setting interface name dynamically from client for SOAP Adapter...
Regds
Abhishek -
Restriction of business partner role in the BP transaction
We have a requirement 3 iniividual BP transactions each with their own set of roles.
We are using CRM 4.0
Any ideas?
Cheers
RichardHi
You can enhance the BP by creating a transaction code that allows you to create BP only with specific roles.
Tx code: to create a transaction code is SE93
To assign the Tx code to a specific role related activity: BUSF
Hope this helps
Regards
Rekha Dadwal -
How to create ISU Business partner from copying the existing ISU BP
Hi,
What is the BAPI used to create the new ISU BP from copying the data of the existing ISU BP? Please help.Hi Sreenivas,
Can you please let me know the BAPI name or else the solution for the above.
Thanks in Advance,
Abhishek Ranjan.
Edited by: abhishek ranjan on Oct 11, 2011 2:07 PM -
Duplicate check: access ID of current business partner
Hello,
we're using BADI ADDRESS_SEARCH to perform duplicate check of business partners in CRM 7.0.
Some relevant address fields are passed to method ADDRESS_SEARCH (e.g. city, country, ...), however, not the partner ID or the GUID of the business partner.
Is there any chance to access the currently processed business partner from inside the BADI method? The former (CRM 4.0, 5.0) BDT function modules "BUPMEMORY" don't work any more.
The thing is that we need to control the duplicate check based on several BP attributes like grouping, BP role, and so on.
Kindly consider that we're not in the IC (interaction center) but in the CRM web client (role SALESPRO)
Many thanks for any help & kind regards
WolfgangHi,
One way is to enhance the custom controller of the BP_HEAD component, add a new attribute e.g., BP No or GUID and set its value on submitorenter event or save event and inside the BADI retrieve the custom controller reference to fetch the BP No or GUID.
Regards
Prasenjit -
How to access the URL on page load and open it in the new tab of browser
Hi All,
I am using Jdeveloper 11.1.1.5 and i have one page "Hello.jspx" and one data control consist of two attributes :-one is "id" and other is "url".
The datacontrol has been created from the WebService.
Now my requirement is : -
whenever i run the page "Hello.jspx" , then on page load the url attribute should get accessed and should be opened in a new window or tab of the browser.As the url contains the information about the document.
Hello.jspx page doesn't contain any bindings of the url attribute.
I had thought of using the PhaseListener class and use the onPageLoad method .But how do i get the url from the dataControl and open it in the other tab of the browser on page load.
Please suggest!!!!
Thanks.Hi,
I don't think this can be done this way. I would think that you need to execute JavaScript upon Hello.jspx load to open a new window and pass the URL to it
Frank -
Additonal partner functions at the business agreement
Hi Experts,
We have a requirement to pass on one of the partner functions to the clerk responsible field at the contract account in IS-U.
For this ,we want to use the additional partner functions section at the buisness agreement level in CRM.
We have maintained the partner function which we want to replicate in IS-U in the configurations settings for IS-U under the following path-
SPRO->Financial Accounting->Contract Account AR&AP->Integration->Customer Relationship Mgmt->Buisness Agreement->Define determination of Clerk responsible for Replication from CRM.
Now the problem, is when we are giving the partner function along with the business partner value in the "addtional partner functions" section under the BA tab in CRM,and saving it , the changes are not getting saved and no B-Doc is getting fired.
However, when we are using any other partner function like alternate payer, dunning recipent in the same BA tab and saving it, it is working fine and the partner function value is replicated in the clerk responsible field at the contract account in IS-U.
Can anyone please help me in solving the issue?
Thanks in advance.
Cheers,
AmlanTry use BADI BUPA_GENERAL_EXPORT. In method GENERAL_DATA_EXPORT you can check main BP data and raise error.
Example for method if_ex_bupa_general_export~general_data_export:
DATA: l_but000 TYPE but000,
return TYPE bapiret2.
SELECT SINGLE * FROM but000 INTO l_but000
WHERE name_last = is_but000-name_last
AND name_first = is_but000-name_first.
IF sy-subrc IS INITIAL.
return-type = 'E'.
return-id = 'BC'.
return-number = '701'.
return-message_v1 = 'Check error'.
APPEND return TO ct_return.
ENDIF. -
Can't access business partner's Public Folder
I am having trouble accessing my business partner'spublic folder via file sharing on her imac. I set up her computer on file sharing and followed step b step instructions from Apple. SO when I came home to access her public folder per the intructions I had, it it still is not working. Any help is greatly appreciated. Thank you so much!!!
susan262 wrote:
I dont see anything. Thanks anyway
Do you mean you don't see anything listed under Shared, or that you don't see the entire pane I'm referring to?
Maybe you are looking for
-
A problem about the "Max running jobs". Thanks a million!
Hello everyone, The "Max running jobs" was set to 15. (1). When I dragged two assets into FCSvr at a time, in the "Search all jobs" window, I saw the first one being uploaded then transcoded, and later the second one being uploaded then transcoded. (
-
Cannot Connect to Google Calendar in Mail, Contacts & Calendars preferences
I recently obtained a new Mac and am playing with Mountain Lion for the first time. I'm trying to add my Google Apps (custom domain, not @gmail.com) account to the Mail, Contacts & Calendars control panel. I was able to add Mail, Messages, and Notes
-
i have old ipod touch which has software version 1.1.5 i would like to know which version i can update in that and ipod and how
-
After setting OracleBIAnalyticsApps.rpd as default repository in NQSConfig.INI, the following error showed up in the BI Server log, NQScheduler.log: [nQSError: 43059] Init block 'LAST_SYND_DS_YTD_QTD': Dynamic refresh of repository scope variables ha
-
How to use paymetn advice to clear open customer items
Hello, I manually created a payment advie for a certain amt and i want to use it to clear open item, when i use the payment advice numebr in f-28 incoming payment screen i do not see any data coming up from the payment advice, can anybody tell me h