Access and Field Blob

I'm trying to retrieve data from Blob Field (in DB Access) and save the value in a file, but the size of extracted file is double of Blob content.
I try to use class inputstream outputstream readers and writers, but it does not work
Why??
Urgent !!!!

Readers and writers use Unicode characters, which have two bytes per character. I believe InputStream and OutputStream use only single bytes- have you tried this? Remember to use the same types for both writing and reading.

Similar Messages

Setting Opportunity Access and Contact Access to null in Account Team

Hi,
We can set the the Opportunity Access and Contact Access to blank/null manually in the application but is it possible to set these to blank using import?
Thanks,
Teena

Hi,
Thanks for the reply. We have tried updating a record through Account Team > Import > Overwrite Existing Records where the Contact Access and Opportunity Access fields were blank. The import was successfull but the fields were not updated, they are still set to Full access. We used the Account EUID in the import file.
Regards,
Teena

Report and Field Explorer dont work in Crystal Reports 2008

Hi
I am using the following versions of Crystal Reports:
Crystal Reports 2008 (Service Pack 1)
CR Developer
Version 12.1.0.892
Product Type: Full
Target environment: .NET 3.5 windows forms and asp.net application
Since a couple of days, i can no longer access the field explorer nor the report exlorer. Anything else seems to be working fine. I first thought these windows were somewhere hidden behind another window but as much as i searched, i didnt succed in finding them :-(. Our product has a valid licence and is registered, by the way.
My question is now, what do i have to do to get my field/report explorer again. Maybe, installing the latest service pack had an influence, but i cannot tell for sure.
Any help is appreciated
Thanks in advance

Please note that this forum is dedicated to topics related to custom application development or deployment with Crystal Reports in .Net. This includes full versions of Crystal Reports as well as those versions of Crystal Reports bundled with Microsoft Visual Studio .Net.
Your query appears to concern the CR designer. As such, please post your query to the Crystal Reports Design Forum:
SAP Crystal Reports
Ludek

Plz help me to find out tables and fields........based on SD,PM,FICO Module

Hi plz help me to find out the table name and field names as i am unable to find .....In the spec am given requirements in the following pattern.
Description          SAP-Term                                       Explaination
1.Salesman        Equipment AC Mgr.                          VBPA2 this is the salesman code - I need the
description for this.
2.Vendor              MEPO_TOPLINE-SUPERFIELD     Vendor field is pull from me23n where the
condition will be that COBL-KDAUF (this is a
                                                                                structure from me23n in item data-account
                                                                                assignment-sales order. The number here should
                                                                                be the corresponding contract number. This field
                                                                                should include a multiple selection function. User
can put more than one description to search for.
3. Val. Period   Val. Period Category                           Val. Period Category from va41 header-contract
    Category                                                               data. This field should include a multiple selection
function. User can put more than one description
to search for.
4. Service Order/    CAUFVD-GSTRP/                         This should be the document date where by it is in
    Purchase Order      MEPO_TOPLINE-BEDAT          between the range the user input
    Document Date
5. B2B Vendor      MEPO_TOPLINE-SUPERFIELD     Vendor field is pull from me23n where the condition
will be that COBL-KDAUF (this is a structure from
                                                                                me23n in item data-account assignment-sales
order. The number here should be the
corresponding contract number.
6. B2B Cost         MEPO1211-NETPR                       This cost is pulled from PO (me23n) however take
                                                                                note that the price will be pulled out base on line
item Net Price. Make sure that price is taken
corresponding only to the equipment tied to it.
Check on Number 7 to see how is the line item tied
to the equipment.
If this is in other currency please make it to SGD
with the exchange rate field Exchange rate
(MEPO1226-WKURS)
                                                                              NOTE:: I need to know the table from which I can
determine the currency type as can be seen in the
ME23N transaction and also te exchange rate for
that particular currency.
7. No of faults                                                          The service order (CAUFVD-AUFNR) created base
on the equipment in Number 8. This should exclude
the service order of type RD08. Service order can be
access by IW33.
8. Faults Completed                                                This would be the number of faults (Number 13)
which has a system status (CAUFVD-STTXT) of
TECO. System status can be viewed in IW33 Sys.
Status. Take note service order type RD08 will be
excluded
9. Time Spent on Fault   AFVGD-ISMNW                   This field is in IW41 in confirmation base on the
order created. This field will be the actual time
spent. This will correspond to the Faults
Completed (Number 14). This means only orders
with system status TECO will be pull. Take not
service order type RD08 will be excluded
10. Fault Cost         RIHAUFK_LIST- DGESKOSIST   This will be the total cost for a service order which
have the status TECO. Those which are not TECO
will not be needed. This field can be obtain from
IW39 (standard report). Execute the report and
there will be a field for Total Actual Cost. You might
need to change the screen layout to be able to view
this. Take note service order type RD08 will be
excluded
11. PM Hours      AFVGD-ISMNW                            This field is in IW41 in confirmation base on the
                                                                             order created. This field will be the actual time
                                                                             spent. This will correspond to the Faults Completed
                                                                             This means only orders with system
                                                                             status TECO will be pull. Take note service only
                                                                             take order type RD08.
12. Spare Cost   Spare part cost                              This field will be in IW33 under cost tab, and cost
                         PMCOEA-IKOSTENKGR                tab in item level. This will be the actual cost of spare
                                                                             part after TECO. This will include all order type.
13. Credit Note   Credit Memo                                 The programs need to pull out credit memo which is
                                                                             reference from the contract. If there is a credit memo
                                                                             reference from the contract then the value will be net
                                                                             price per equipment.

Can u tell me purpose of this spec ?
Regards,
pandu.

Error while insert into database using DB adpater for Field BLOB

Hello All
I am trying to tranfer data from Database A to Database B using Oracle DB adapter.
Table of databse A contains field BLOB, which cotains the resume /doc file.After transformation in Database B format ,while invoking the DB adapter to insert, I am getting follwing error
<bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="code"><code>null</code>
</part><part name="summary"><summary>file:/u01/bpelvinc/product/10.1.3.1/OracleAS_1/bpel/domains/viapps/tmp/.bpel_ERecuit_Application_New_1.0_d1c2b2149a9e0c7c745279667ad1fc84.tmp/DB_APPL_111.wsdl [ DB_APPL_111_ptt::insert(RtmApplicantCollection) ] - WSIF JCA Execute of operation 'insert' failed due to: DBWriteInteractionSpec Execute Failed Exception.
insert failed. Descriptor name: [DBAPPL111.RtmApplicant]. [Caused by: Error in encoded stream, got 2]
; nested exception is:
ORABPEL-11616
DBWriteInteractionSpec Execute Failed Exception.
insert failed. Descriptor name: [DBAPPL111.RtmApplicant]. [Caused by: Error in encoded stream, got 2]
Caused by Exception [TOPLINK-3001] (Oracle TopLink - 10g Release 3 (10.1.3.3.0) (Build 070608)): oracle.toplink.exceptions.ConversionException
Exception Description: The object [xs:base64Binary 43524541544520544193B0D0A], of class [class java.lang.String], could not be converted to [class java.sql.Timestamp].
Internal Exception: java.io.IOException: Error in encoded stream, got 2.
</summary>
</part><part name="detail"><detail>
Exception Description: The object [xs:base64Binary 4352E616D65293B0D0A], of class [class java.lang.String], could not be converted to [class java.sql.Timestamp].
Internal Exception: java.io.IOException: Error in encoded stream, got 2</detail>
</part></bindingFault>
Please let me know ,what are the possibilities.
Thanks
Satendra

Hi...
well... My flow goes like Pl/SQl ---> BPEL,
Now PL/SQL code reads data from the Database A and Send it to BPEL which inserts into the Database B.
with respest to above design, I found the problem in pl/sql block.
Actually I am sending a BLOB field in the soap message. but some how pl/sql now ablt tot handle that or sending some wrong data.
my question is how to send a blob filed data to bpel using pl/sql block. this the reasion I am getting above error.
Thanks

As a stockholder, I would like see the development of iTV with Retina display and integrating Siri control, internet access, and iTunes apps. This new product would be a large screen, thin wall mounted television, much like a oversided iPad.

As a stockholder, I would like see the development of iTV with Retina display and integrating Siri control, internet access, and iTunes apps. This new product would be a large screen, thin wall mounted television, much like a oversided iPad.
Do you think this product is possible?

In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt

Access to fields of a form through IAC

Hello everyone!
I created with Adobe LiveCycle Designer ES2 (included with Adobe Acrobat X Pro) an example form with several fields.
After that I wanted to access the fields through the Acrobat SDK's Interapplication Communication (IAC) capability by using OLE.
As programming language I choose C# from the .NET framework. But the only field that I could access was the signature field and only when it was signed. I could not figure out the mistake. Is my code wrong? Or is the created form wrong? Can somebody help?
The code that I used:
Acrobat.AcroApp app = null;
Acrobat.AcroAVDoc avdoc;
AFORMAUTLib.AFormApp formApp;
AFORMAUTLib.IFields fields;
app = new Acrobat.AcroApp();
avdoc = new Acrobat.AcroAVDocClass();avdoc.Open(@"Form.pdf", null);
formApp = new AFORMAUTLib.AFormApp();
fields = formApp.Fields;
int fieldsCount = fields.Count;
foreach (var item in fields)
AFORMAUTLib.IField field = (AFORMAUTLib.IField)item;
result = field.Name + " = " + field.Value + "[" + field.Type + "]";

Yes, if the form is Reader Enabled, then a Reader user can add a graphic as the icon of a button via scripting to an AcroForm.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Tue, 27 Sep 2011 00:31:26 -0700
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Access to fields of a form through IAC
Re: Access to fields of a form through IAC
created by gatch<http://forums.adobe.com/people/_gatch_> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/3939773#3939773

Can FTP-access to field point log file interrupt the running program?

Can FTP-access to field point log file interrupt the running program?
We have a problem where our factory process control program on a Field Pointer suddenly stops the process. We are running the development system on a PC, wich deploys the program on the Field point, with user interface on the PC. Quite often the process stops for no apparent reason. I'm not sure right now if the control program on the Field Point is still running or if it stops. We use FTP from a distant PC (over VPN) directly to the Field Point to check if the process is running, by looking for date and size of log files produced during running process. I've never opened och copied any log file during process run, because this I'm sure this would cause problems for new log entries to be written. But can the mere looking at the log folder via XP-pros ftp-functionality cause the Field Point to have problems writing data to a log file?
I'm not sure how windows XP pro handles "my network places" when it comes to FTP, it look that it keeps some kind of local copy of the folders, or at least the files opened.
Next version of the program will have only basic functionality on the Field Point, leaving logging etc. to another program on the PC, but right now we are stuck with this system.
Ola A

It turned out that the problem lies in the harware of the production machine, it was not a labiew-program problem at all!
Ola

Problem accessing TABLE fields in SELECT statement

Hi,
We are currently using Oracle Database 10.2.0.2.0.
In the following code, using a function to access TABLE fields works, but not when accessing the table fields directly (in the latter case, I get a no data found exception).
Why is that?
Thanks for your help.
Olivier
PS: I do have a lengthy explanation of why we would want to do that as well as the full packages, etc... But I didn't want to bore you to no end.
I'll post it if required.
CREATE OR REPLACE PACKAGE PA_TEST_DEVTBL AS
   TYPE TBL_ROLCODE IS TABLE OF LANROLE.ROLCODE%TYPE INDEX BY BINARY_INTEGER;
   TYPE TBL_ROLLABEL IS TABLE OF LANROLE.ROLLABEL%TYPE INDEX BY BINARY_INTEGER;
end PA_TEST_DEVTBL;
CREATE OR REPLACE PACKAGE BODY PA_TEST AS
   -- Array containing the selected data
   TblRolCode PA_TEST_DEVTBL.TBL_ROLCODE;
   TblRolLabel PA_TEST_DEVTBL.TBL_ROLLABEL;
   -- Functions created to retrieve each array data
   FUNCTION F_GET_ROLCODE( nIndex NUMBER ) RETURN LANROLE.ROLCODE%TYPE IS
   BEGIN
      RETURN TblRolCode( nIndex );
   END F_GET_ROLCODE;
   FUNCTION F_GET_ROLLABEL( nIndex NUMBER ) RETURN LANROLE.ROLLABEL%TYPE IS
   BEGIN
      RETURN TblRolLABEL( nIndex );
   END F_GET_ROLLABEL;
   PROCEDURE S_TEST (
-- THIS DOESN'T WORK (ORA-01403: no data found)
OPEN cReturn FOR
SELECT TblRolCode( ROWNUM ),
TblRolLabel( ROWNUM )
FROM TABLE( CAST( tblRows AS T_TBL_NUMBER ) );
-- BUT THIS WORKS !!!
OPEN cReturn FOR
SELECT F_GET_ROLCODE( ROWNUM ) AS ROLCODE,
F_GET_ROLLABEL( ROWNUM ) AS ROLLABEL
FROM TABLE( CAST( tblRows AS T_TBL_NUMBER ) );
..

well it could be managed by simple HTML tags or simple javascript properties and events itself...
All you have to do is encode URL and pass it as the request parameters to the next page.
Checkout a simple example down below.
MainTable.jsp:
============
<table>
<thead>
<tr>
</tr>
</thead>
<tbody>
<c:forEach var="DTOBean" items="${request.dbList}">
<tr>
     <td><c:out value="${DTOBean.rowId}"/></td>
     <td onClick="window.location.href='/testpage.jsp?col2='+escape('<c:out value="${DTOBean.col2}"/>')+'&col3='+escape('<c:out value="${DTOBean.col3}"/>'); " ><c:out value="${DTOBean.col1"/></td>
    
      <td><c:out value="${DTOBean.col2"/></td>
      <td><c:out value="${DTOBean.col3"/></td>
</tr>
</c:forEach>
</tbody>
</table>
--------------------------------------------------testpage.jsp:
==========
Column2 : <c:out value="${param.col2}"/>
Column3 : <c:out value="${param.col3}"/>
--------------------------------------------------Hope that might help.
REGARDS,
RaHuL

Can we add users to the 'Manage Access Request' field to process site access request in SharePoint Online?

Hi,
I have a requirement in which I have to assign couple of email ids to the "Manage Access Request" field to process site access requests. And, this is possible using server object model but I have to achieve this on SharePoint Online with the help
of CSOM.
There are two properties which control the access request configuration, first is "RequestAccessEnabled", a Boolean flag which turns on or off the access request feature for the site. The second property defines one or more email addresses where
requests will be sent to. It is named "RequestAccessEmail".
The above both properties are available for server object model but not for CSOM.
So, is there any other workaround or way to achieve the sane in CSOM?
Thanks,

I don't think there is a programmatic workaround for SharePoint Online. But the email address is just used for Notification. Anyone with Manage Permissions can approve Access Requests. If you create an email distribution list for the multiple
addresses that should be notified you should be able to add the email address for the distribution list into the Access request email field using the user interface.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Is It possible to access checksum field of LIN frame?

Hi All,
I am using LabVIEW 8.2 and PCI 3072 LIN card (GÖPEL electronic GmbH) .
Is it possible to access checksum field of LIN frame? I have to test one LIN driver - LIN conformance test. So I need to access timing of each byte, value of checksum, sync field etc. Anybody please reply
Regards
Preejesh M R

Hi,
You should have found some examples along with the Drivers provided in the CD which comes along with the card. If not, you can contact Goepel and they can provide them. Which driver APIs are you using for this device? Is there a function for checksum in the API, if not you can create a logic to read the string and convert it to a number and add all the bits together. My first suggestion, however is to contact Goepel.
Thanks,
National Instruments
Applications Engineer

With FF 10, when accessing fields: no cursor appears, cannot select text, no visual indication that you have accessed a field.

When clicking in a field to enter text (as in this text box), no visual indicator appears (i.e., blinking cursor) to let you know that you have accessed the field. In addition, when selecting text in the field, there is no indicator that you have selected text (not highlighted). The only way to know is to start typing or to try and cut the text or paste text. It is not intuitive at all.

You may be experiencing this bug that will be fixed in Firefox 10.0.1, possibly released later this week.
*[https://bugzilla.mozilla.org/show_bug.cgi?id=718939 bug 718939] - Java applet causes text entry fields to become semi-unresponsive

Controlling material master access through field groups

Hello SAP Gurus,
We want to control the material master access (MM01/02) using field groups. I am unable to find any authorization object provided by SAP which can control access at field group level.
My scenarios is that certain group of people should be able to only display the fields in MM02 tcode and certain group of people should be able to change it. Please suggest if there is any config which will enable me to do this.
Thanks and Regards
Amit Gupta

Dear usen the following authorization object to contol the field entry on view level,
I donot think at field group level it is there
M_MATE_STA
status are nothiong but views
A     Work scheduling
B     Accounting
C     Classification
D     MRP
E     Purchasing
F     Production resources/tools
G     Costing
K     Basic data
L     Storage
P     Forecasting
Q     Quality management
S     Warehouse management
V     Sales
X     Plant stocks
Z     Storage location stocks

How to access dynamic fields in a field symbol

hi
how do i access the dynamic fields created in side a field-symbol....
wht i mean is i have a table, whose workarea i assign to field symbol. but this table is runtime, altough i have debugged and found the values in this table, I want to accees the field symbol in a generic way.
say the table has 3 fields now fld1 fld2 and fld3 so i want to access the field symbol <fs> as <fs>-(name) where name can be anything fld1 or fld2 whichever i assign....
thanks. Let me know if you have any further questions.

Field symbols are placeholders or symbolic names for other fields. They do not physically reserve space for a field, but point to its contents. A field symbol cam point to any data object. The data object to which a field symbol points is assigned to it after it has been declared in the program.
Whenever you address a field symbol in a program, you are addressing the field that is assigned to the field symbol. After successful assignment, there is no difference in ABAP whether you reference the field symbol or the field itself. You must assign a field to a field symbol before you can address it in a program.
Field symbols are similar to de-referenced pointers in the C programming language (that is, pointers to which the content operator * is applied). In ABAP, data references represent a real equivalent to pointers in the sense of variables that contain a memory address and can be used without the contents operator.
All operations programmed with field symbols are applied to the field assigned to it. A MOVE statement between two field symbols, for example, assigns the contents of the field assigned to another source field symbol to the field assigned to the target field symbol. The field symbols themselves point to the same fields after the MOVE statement as they did before the MOVEstatement.
You can create field symbols either without or with type specifications. If you do not specify a type, the field symbol inherits all of the technical attributes of the field assigned to it. If you do specify a type, the system checks during the field assignment whether the assigned field matches the type of field symbol.
Field symbols provide greater flexibility when you address data objects:
·        You can assign one field symbol to another, which allows you to address subfields.
·        Assignments to field symbols may extend beyond field boundaries. This allows you to address regular sequences of fields in memory efficiently.
·        You can also force a field symbol to take different technical properties than those of the field assigned to it (casting).
The flexibility of field symbols provides elegant solutions to certain problems. On the other hand, it does mean that errors can easily occur. Since fields are not assigned to field symbols until runtime, the effectiveness of syntax and security checks is very limited for operations involving field symbols. This can lead to runtime errors or incorrect data assignments.
While runtime errors indicate an obvious problem, incorrect data assignments are dangerous because they can be very difficult to detect. For this reason, you should only use field symbols if you cannot achieve the same result using other ABAP statements.
For example, you may want to process part of a string where the offset and length depend on the contents of the field. You could use field symbols in this case. The MOVE statement (with your own auxiliary variables, if required) is much safer than using field symbols, since it cannot address memory beyond the boundary of a field. However, field symbols may improve performance in some cases.
To declare a field symbol, use the statement
FIELD-SYMBOLS .
For field symbols, the angle brackets are part of the syntax. They identify field symbols in the program code.
If you do not specify any additions, the field symbol.
in a static ASSIGN and:
ASSIGN (dobj) TO from the second loop pass onwards.

How to access hidden fields in a table

hi
what is the use of hidden fields in a table, ie. some fields doesn't visible in the field list of a table. but the fileds will be visible if u display its contents.
for example in table t518A the text field is not visible in the field list. But it will be visible if display its contents. can any one of u please help me out how to access those fields.
regards
sri

Hi Srivallika,
The table T518A has a text table called T518B. You can have a look at this table by:-
1. GOTO SE11 and display table T518A.
2. GOTO menu GOTO -> TEXT table. It gives the text table for the given table. Here its is T518B.
A Text table is table with same key fields as the main table with another extra Language key TYPE SPRAS. This table is related to the main table. Hence to access the extra text fields, you can use the TEXT table :).
Thanks and regards,
Ravi.
NOTE: Points keep me alive on SDN .

Access and Field Blob

Similar Messages

Maybe you are looking for