Access Anywhere file conflicts

Hi,
I have access anywhere being used by a company accessing files to another. The external company can't view files that are currently open by the internal company. Is this intended by the Access Anywhere facility and is there a way to prevent this to allow
the external company to view all files weather they are open or not.
Thanks.

I don't think this is going to work,
If a file is open internally, it will be locked so it wont be available to be used via RWW, or probably even via SMB.
Why the need to open files that are also open internally?
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+

Similar Messages

On Pages 09, my word documents I've been saving it to iCloud, to access anywhere, but I would like to keep my docs organized in files on my finder as usual, and saving to iCloud, I lose my local one.How can I fix it and not desorganize my files?

On Pages 09, my word documents I've been saving it to iCloud, to access anywhere, but I would like to keep my docs organized in files on my finder as usual, and saving to iCloud, I lose my local one.How can I fix it and not desorganize my files?

It's either in local folders, as it seem you had been doing, or in icloud. If you go into the mac's Pages and view the icloud files, you can drag on onto another to create a folder. But you can only have folder one level deep, so you can't organize your files/folders like you can on a mac, using nested folder several levels deep.

Access Your Files Anywhere | Photoshop CS6 Feature Tour | Adobe TV

Use automatic cloud storage and syncing to reliably access your files anywhere, on any device, and easily share them with colleagues. View files from Adobe InDesign, Photoshop, and other applications; turn layers on and off; and so much more.
http://adobe.ly/IlAme0

I'm not sure how to get the Creative Cloud Folder in my home folder like this video shows. What am I missing?

Access List and Conflict Resolution Problem!

My configuration for Allow and Deny is not allowing me to load images and CSS files through the gateway on a URLScraper channel.
I'm trying to figure out how to control access to resources using the Access List service, and I'm running into trouble. The Sun ONE Portal Server, Secure Remote Access 6.0 Administrator's Guide (Doc 816-6421-10) states:
Setting the Conflict Resolution Level
You can set the priority level for the dynamic attributes. If a user inherits multiple attribute templates, say from an organization and a role assignment, and there is a template conflict between the attributes in the two templates, the template with the highest priority is inherited. There are seven settings available ranging from Highest to Lowest.
See the Administration Guide, iPlanet Directory Server Access Management Edition for more details on conflict resolution.
Unfortunately the referenced Adminstration Guide for DSAME contains exactly 0 occurances of the word "conflict" in its 136 pages, so that reference was less than helpful. Chapter 17 of that document (Doc 816-5620-10) describes URL Policy Agent Attributes, which sheds some light on what the URL Deny and URL Allow settings mean. The key sentence is, "An empty Deny list will allow only those resources that are allowed by the Allow list."
So, I've set up my Access List services as follows:
o URL Deny is blank on all Access Lists
o URL Allow set as follows
---- isp
------- http://portal.acme.com/portal/* (company name changed to protect the guilty!)
---- acme.com organization
------- Conflict Resolution: Highest
------- http://portal.acme.com/portal/* (same as above)
---- Acme Customers Role - shared role for all Acme customers
------- Conflict Resolution: Medium
------- http://www.acme.com/*
------- http://support.acme.com/*
------- http://support2.acme.com/*
---- RoadRunner role - specific role for a specific customer
------- Conflict Resolution: Medium
------- http://roadrunnerinfo.acme.com/*
The Desktop services in each of the above two roles includes channels from the hosts in the URL Allow lists.
The behavior I'm seeing with this configuration is that the desktop channels include information from the scraped HTML, and the URLs are rewritten for the included images and CSS files and such. However, the gateway is denying access to the images referenced by the rewritten URL. That is, an image with a URL of https://portal.acme.com/http://roadrunnerinfo.acme.com/images/green.gif shows up as a broken image on the desktop. Attempting to access the URL to the image directly results in an "Access to this resource is denied !! Contact your administrator" error message.
If I set the conflict resolution on the acme.corp organization to Medium (or anything lower than the two role conflict resolution levels) results in the same error message as soon as the customer logs in (no desktop rendered). The same error occurs if I set the conflict resolution in the two roles to Highest (same as the top level organization), again with no desktop rendered on login.
If I put all the above referenced URLs in the acme.com organization Access List service, then I am successfully able to fetch all the resources (images, CSS, etc.) in the URLScraper HTML. Likewise if I put "*" in that Access List. However, this is less than ideal, as it would potentially allow other customers to view data that isn't theirs (Wile E. Coyote user should not be able to get to Road Runner data, and vice versa, and neither one of them should get at Acme private information!).
So, what am I doing wrong? Also, does anyone have any leads on where I can read up on how Access Lists and conflict resolution are supposed to work, since Sun neglected to include a valid reference in the Administrator's Guide, Portal Server 6.0 SRA?
Thanks!
-matt

Did you ever get anywhere with this. My experiments seem to inidicate that you cannot successfully combine Access and Deny directives, across roles or organizational defaults and a role.

Microsoft Excel cannot access the file "-". There are several possible reasons. Windows Server 2008 R2 with Microsoft Office 2010

I have a problem with starting the Excel Application under a particular user (service account).
I try to schedule this C# script through an application X (not Windows Task Scheduler. And this
application will always use a service account to run services on the server). If I run the C# script in
command prompt under the same user, it runs. Under the application X, which uses the exact same
user, to initiate the C# script, it fails to open the Excel application (not sufficient permission?).
This script calls application.Workbooks.Open(<ExcelFileName>,0,false,Type.missing....). At this line
of code, it gives the following error:
Microsoft Excel cannot access the file "...". There are several possible reasons:
-The file name or path does not exist.
-The file is being used by another program.
-The workbook you are trying to save has the same name as a currently open workbook.
I tried all the methods that I found online as follow:
Create directory "C:\Windows\SysWOW64\config\systemprofile\Desktop" (for 64 bit Windows) or "C:\Windows\System32\config\systemprofile\Desktop" (for 32 bit Windows).
Changed the DCOM config for the Microsoft Excel application to include this user for Local/Remote Launch and Access.
Enabled all macros in Excel application and set the Trust Center.
Add the user to have full control on all folders that contain the Excel file.
Under DCOM
config, Microsoft Excel Application, if I modify the Identity tab to check on "This User" and enter the username/password to let Excel always run under that user. Then the application runs perfectly. However, other users can't run the excel application
on their own with the following error: "Cannot use object linking and embedding". If I check "Use the launching user", then Excel can't be launched. No errors in the logs or events anywhere to check.
Yet, still the same error. I think it's permission but I am not sure where and what to do for this to work.
Now, normally, when I run this excel report, I can double-click on the file and it'd automatically run,
save the new parameters into the current file and generate a new excel file (with date attached to the
file name). That means there is a change (save) to the original file.
Environment: Windows Server 2008 R2 and running Microsoft Excel 2010.
I appreciate all your help!

I am wondering if this has anything to do with having the user log into Excel.
In point #5 above: Under DCOM config, Microsoft Excel Application, if I modify the Identity tab to check on "This User" and enter the username/password to let Excel always run under that user. Then the application runs perfectly. However, other
users can't run the excel application on their own with the following error: "Cannot use object linking and embedding". If I check "Use the launching user", then Excel can't be launched. No errors in the logs or events anywhere to check.
Because running with the launching user proposes an user to run the Excel application. However, I do not think there is any where that we can pass in the password for this user to Excel. However, this Excel has all the permissions to Excel application as
well as the folders that have the Excel files.
Please help!
Thank you!

How to access temporal files ?

Hi guys,
I have an applet that calls JNI functions to access C code. C code accesses some files to get data. The problem is that I dont know the best or best suitable solution where to put this files the C code read. I explain better, my applet code is going to run under many different operating systems so, I dont want to create a temporal directory to put the files in each O.S.
So, I want to know where is the best suitable site to put this files. Can I access some java environment variable which indicates java temporal archives or something like that to put this files there ? then pass this directory (java temporal archives) to the jni side and then access the files ?
Every idea will be totally aprecciated !

bifiado wrote:
The thing is more about where to create this temporal file. Do you want the file to be created yesterday, or tomorrow?
You mean "temporary" not "temporal".
I mean, do I create this file in the root directory or in the home directory or where?Did you not read the Javadoc for [createTempFile()|http://java.sun.com/j2se/1.5.0/docs/api/java/io/File.html#createTempFile(java.lang.String,%20java.lang.String)] ?
Creates an empty file in the default temporary-file directory
Isnt there any java temporal files directory anywhere in the file system? You mean "temporary" not "temporal".
... is there any way I can know its location via a environment variable or something like that ?Java will use the default temporary file location given by the OS.
You can change the default temporary file location by running java with -D[java.io.tmpdir|http://www.google.com/search?q=java.io.tmpdir]=alternate-location

Sharing and Accessing Folders & Files over a Network

Structure: 2 iMac desktops linked together over an ethernet connection. NO SERVER.
I'm having trouble getting folders shared on my new iMac. I'm an ex-windows guy, and in Windows you only have to share a main folder or sub folder to get access to the files. I have two folders shared between 2 different iMacs, but I can't access the files there, as I get a "you don't have permission" warning.
I get conflicting information when I share folders then "add" people to the permissions list. It shows me as kevsahl, but when i go to add myself to my office managers machine, it shows me as my contact in the address book. Why is it so difficult?
Everything about the MAC is easier, to me any way, so can someone please tell me the secret shortcut to making this an easy task!
Thanks!
Kevin
(2) iMac
(1) Macbook Pro 13"
(1) iPad2
(4) iPhones

I apologize, it appears I'm in the wrong forum. you are correct, i don't have a PPC, just the basic new iMac with Snow Leopard.
Sorry! I'll post this in the appropriate area.
Kevin

[Info] redland-1.0.6-1 file conflicts

Redland file conflicts with Raptor!
[root@arch-01 jada]# pacman -S redland
resolving dependencies... done.
looking for inter-conflicts... done.
Targets: redland-1.0.6-1
Total Package Size: 0.78 MB
Proceed with installation? [Y/n] y
:: Retrieving packages from extra...
error: failed retrieving file 'redland-1.0.6-1-i686.pkg.tar.gz' from ftp.archlinux.org : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'redland-1.0.6-1-i686.pkg.tar.gz' from ftp.nethat.com : Not logged in
redland 795.5K 401.7K/s 00:00:02 [#####################] 100%
checking package integrity... done.
cleaning up... done.
(1/1) checking for file conflicts [#####################] 100%
error: could not prepare transaction
error: failed to commit transaction (conflicting files)
redland: /usr/bin/rapper exists in filesystem
redland: /usr/bin/raptor-config exists in filesystem
redland: /usr/include/raptor.h exists in filesystem
redland: /usr/lib/libraptor.a exists in filesystem
redland: /usr/lib/libraptor.so exists in filesystem
redland: /usr/lib/libraptor.so.1 exists in filesystem
redland: /usr/lib/libraptor.so.1.1.0 exists in filesystem
redland: /usr/lib/pkgconfig/raptor.pc exists in filesystem
redland: /usr/man/man1/rapper.1.gz exists in filesystem
redland: /usr/man/man1/raptor-config.1.gz exists in filesystem
redland: /usr/man/man3/libraptor.3.gz exists in filesystem
errors occurred, no packages were upgraded.
[root@arch-01 jada]#

Please submit a bug report.

Remote Desktop/Access shared files over PPTP VPN

Hello,
I just bought the RV180W so I can connect to my office computer from anywhere as a VPN client. The two things I need to do while I am connected as a VPN client is to be able to access my files on my office desktop and be able to remote desktop to it as well. I have Win7 on all of my computers. Ideally, I would like to do that over PPTP VPN connection but if that is not possible I can try Cisco QuickVPN software.
I enabled PPTP on my router and created a user account. I was also able to successfully establish the connection remotely. While I was connected as a PPTP VPN client, I was able to access the Internet and my router setup page which is telling me that the connection is good. However, I was not able to either discover my office PC under my network tab in Win7 nor I was able to remote desktop. I keep my office PC on all the time and it never go to sleep. I did not create any connection policy but maybe this is the problem. Please let me know if you know of a solution.
Thanks!

Hi David,
Thank you for the response.
I was able to access the router configuration using the local IP address (in my case 192.168.1.1). I don't think I would have been able to access it using the public IP address since I have the router remote management feature disabled.
Now after reading your email, I was finally able to remote desktop and access shared files through a PPTP VPN connection. Here is what I did:
1- I separted the PPTP VPN IP address range from my DHCP range (in my case, PPTP VPN range is 192.168.1.200 to 210 and my DHCP range is from 192.168.1.100 to 199)
2- I assigned my office desktop PC that I am trying to remote desktop to a fixed IP address (192.168.1.20)
3- For remote desktop, I had to type the IP address (192.168.1.20). Typing the PC name (officepc) or searching for was not working.
4- For shared files, I had to map a network drive as //192.168.1.20/My Pictures for example. I couldn't find my PC when searched for it under Network.
After doing all that, I was able to do kinda what I wanted. Ideally, I would have liked to avoid using fixed IP addresses and be able to access computers by their name and see them under the Network tab. Is their a way to do this? I noticed that RV220W offers SSL VPN, would that help me?
I would appreciate it if you could answer my last two questions.
Thanks!
Mustafa

Install GoDaddy SSL Certificate to Windows Server 2012 - Access Anywhere

I would like to activate Access Anywhere on my windows server 2012 essentials. I went through the guided steps and purchased a SSL certificate from Godaddy. Godaddy doesn't offer support regarding the correct installation process of their certificates
using iis 8 (server 2012 essentials). I noticed that Access Anywhere requires a PFX certificate and Godaddy only provided a PKCS #7 and a cer. file. Please let me know if Godaddy's certificates are compatible with windows server 2012 essentials. Without Access
Anywhere functioning on my server, the usefulness of the server greatly decreases. Your assistance is greatly appreciated. Thanks.

All you need is the standard, lowest level, single domain, no email, no bells, no whistles, no UCC. Just a simple SSL cert. Even SBS standard which adds email to the RWA feature, only requires that, thanks to the magic of the dev. team.
Larry Struckmeyer[SBS-MVP] If your question is answered, please mark the response as the answer so that others can benefit.

Unable to access jar file error !

hello,
i have built my netbeans project and obtained the hequalifies.jar file . unfortunately when i'm trying to run this jar file from the prompt command I'mgetting the error: unable to access jar file
here is the command i'm typing:
C:\Users\User\Documents\NetBeansProjects\hEqUALIFIES\dist>java -jar " C:\Users\U
ser\Documents\NetBeansProjects\hEqUALIFIES\dist hequalifies.jar "
anyone has any clue?
10x!

ok i'm gonna make it easier on you.
i gess i found what is the problem but have no idea how to solve it.
when i obtained the .jar file i also obtained a README.txt file in which it is written the following phrase:
** If a library on the projects classpath also has a Class-Path element*
specified in the manifest,the content of the Class-Path element has to be on the projects runtime path.
I'M SORRY BUT I DID NOT UNDERSTAND WHAT IS MEANT BY: what is "the projects runtime path"?
the content of my manifest is:
Manifest-Version: 1.0
Ant-Version: Apache Ant 1.7.1
Created-By: 10.0-b23 (Sun Microsystems Inc.)
Main-Class: hequalifies.ui.HeQualifies
Class-Path: lib/PlugIn
X-COMMENT: Main-Class will be added automatically by build
I'm having problem with lib/plugin.

Crashes when running applications from network share - "Windows cannot access the file for one of the following reasons"

Hi,
starting a couple of weeks ago, we get the following error(s) when running applications from a network share. We don't know what causes this, we are not aware of any major changes in our network infrastructure or client/Server configuration. We did upgrade
a lot of machines to Windows 8, but the issue also occurs on older Win7 computers.
We figured out a workaround though: The applications run fine when launching from a FQDN share (like
\\share.domain.Company.com) and only cause problems when running from
\\share directly. They have worked fine for years without FQDN though.
Any ideas?
Error Details (the Kind of error differs greatly):
# 1 #
Log Name: Application
Source: Application Error
Date: ...
Event ID: 1005
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: vmDEV
Description:
Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program XYZ
because of this error.
Program: XYZ
File:
The error value is listed in the Additional Data section.
User Action
1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
2. If the file still cannot be accessed and
- It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
- It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
4. If the problem persists, restore the file from a backup copy.
5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.
Additional data
Error value: C000020C [ also seen with code C00000C4]
#2 (German error Messages from now on, we only use German OSes, the above english one is translated based on similar error Messages I found on the web) #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea67c3
Name des fehlerhaften Moduls: clr.dll, Version: 4.0.30319.34014, Zeitstempel: 0x52e0b784
Ausnahmecode: 0xc0000006
Fehleroffset: 0x00026549
ID des fehlerhaften Prozesses: 0x13ac
Startzeit der fehlerhaften Anwendung: 0x01d055a854d36445
Pfad der fehlerhaften Anwendung: \\share\application.exe
Pfad des fehlerhaften Moduls: C:\Windows\Microsoft.NET\Framework\v4.0.30319\clr.dll
Berichtskennung: 949ea933-c19b-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
Anwendung: XYZ.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: Ausnahmecode c0000006, Ausnahmeadresse 720B6549
Stapel:
# 3 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei SP.Forms.AutoCompleteSelectionBase.OnEnter(System.EventArgs)
   bei System.Windows.Forms.Control.NotifyEnter()
   bei System.Windows.Forms.ContainerControl.UpdateFocusedControl()
# 4 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei System.IO.UnmanagedMemoryStream.ReadByte()
   bei System.IO.BinaryReader.ReadByte()
   bei System.IO.BinaryReader.Read7BitEncodedInt()
   bei System.Resources.ResourceReader._LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.ResourceReader.LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.ResourceReader.LoadObject(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean, Boolean)
   bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean)
   bei System.Resources.ResourceManager.GetObject(System.String, System.Globalization.CultureInfo, Boolean)
   bei System.Resources.ResourceManager.GetStream(System.String, System.Globalization.CultureInfo)
# 5 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei System.Reflection.RuntimeParameterInfo.get_Name()
   bei System.Diagnostics.StackTrace.ToString(TraceFormat)
   bei System.Environment.GetStackTrace(System.Exception, Boolean)
   bei System.Exception.GetStackTrace(Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString()
# 6 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea834f
Name des fehlerhaften Moduls: KERNELBASE.dll, Version: 6.3.9600.17278, Zeitstempel: 0x53eeb460
Ausnahmecode: 0xe0434352
Fehleroffset: 0x00012f71
ID des fehlerhaften Prozesses: 0xa68
Startzeit der fehlerhaften Anwendung: 0x01d0559cb7ec4ed6
Pfad der fehlerhaften Anwendung: \\share\XYZ.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
Berichtskennung: 010514d0-c190-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
# 7 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea7a6e
Name des fehlerhaften Moduls: ntdll.dll, Version: 6.3.9600.17630, Zeitstempel: 0x54b0d74f
Ausnahmecode: 0xc0000006
Fehleroffset: 0x0006db27
ID des fehlerhaften Prozesses: 0x18dc
Startzeit der fehlerhaften Anwendung: 0x01d0559cb08529c3
Pfad der fehlerhaften Anwendung: \\share\xyz.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\ntdll.dll
Berichtskennung: ef389186-c18f-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:

Hi,
>>The applications run fine when launching from a FQDN share
It sounds like a DNS suffix issue. When this issue occurs, please try to ping share on the client, then check if the corresponding IP address is correct. If the IP address is wrong, please adjust your settings of DNS to make sure that the client can resolve
the share correctly.
If it's very hard to change the settings of the DNS for some reason, as a work around, we can add the entry into the clients' hosts file.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Error on load: System.IO.IOException: The process cannot access the file : error in event viewer when users want to view documents from this third party deployed scan solution

Error on load: System.IO.IOException: The process cannot access the file
'\\server1\SCANSHARED\.pdf' because it is being used by another process.
   at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
   at System.IO.File.WriteAllBytes(String path, Byte[] bytes)
   at abc.Scan.Layouts.ICC.Scan.View.Page_Load(Object sender, EventArgs e)
I faced this error in event viewer when users want to view documents from this third party deployed scan solution
here I have two WFS servers and they configured with load balancing in F5 .
when I enable both servers in F5 I receive this error messages in 2nd server,
when users want to view documents
adil

Do you have antiVirus installed on the sharepoint servers?
These folders may have to be excluded from antivirus scanning when you use file-level antivirus software in SharePoint. If these folders are not excluded, you may see unexpected behavior. For example, you may receive "access denied" error messages when files
are uploaded.
Please follow this KB and exclude the folders from Scanning.
http://support.microsoft.com/kb/952167
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

All my desktop icons are Adobe Reader icons, can't access related files

I was trying to open a file this morning, and when a pop-menu asked what application I wanted to choose (from a list) to open it, I clicked on Adobe Reader - just as a guess. After that, just about all my desktop icons are Adobe icons, and when I click on them, the pop up menus says I can't access the file. These icons also show up on my menu of all my MS Office programs like Outlook, Word, Excel, etc.
Tech support at Adobe recommended I use System Restore, but it also is now an Adobe icon, so I can't open it. If anyone can help reverse this, I'd greatly appreciate it.
Thanks,
David

Hi,
This also happened to me this morning. Now all my icons are PDF symbols and Reader opens when I try to open any other program. I uninstalled Reader it and it fixed itself but when I reinstalled the program the same issue occurred.
I wanted to make PDF reader the default application when openning PDF's vs. Distiller, tinkered and broke my computer.
Any clues on how to bring everything back to normaL?

Not able to access a file referenced from a HTML file

Hi,
Using UCM i am checking two files aboutus.html and aboutusBanner.png in About Us FOLDER.Checkin is happening perfectly well.
Now In JDEVELOPER I am creating a webcenter application (named MyPortalApplication) and accessing those file using a connection to the UCM server.I am able to fetch the files under
Application Resouces->Connection ->Content Repository ->UCM ->Contribution Folder ->About Us
UCM I am using a connection name.
My aboutus.html file in accessing the aboutusBanner.png to display some image.
Below is code snippet for aboutus.html ...
<table align="CENTER" width="930px" BORDER=0 bgcolor="white">
<tr>
<td>
<img src="aboutusBanner.png" />
</td>
</tr>
<tr>
<td valign="top">
<p style="font-family:Verdana;font-size:14px">
<br>
Go Green Eat Fresh opened in 1992 by three Italian brothers with a vision:
</p>
</td>
</tr>
</table>
But when i am running the application that banner image (aboutusBanner.png) is not getting displayed.I think i am not giving the path aboutusBanner.png in aboutus.html correctly.
Please suggest me how my aboutus.html should use the aboutusBanner.png in code given above.
Thanks,
Rajeev

<img src="aboutusBanner.png" />This may reference the file while it is on filesystem (most likely on a web server, must be in the same directory).
If you want to create a reference to a file in UCM (document repository), you need to do it differently. The easiest way (if your file is in Public security group) is to use html link to the file: e.g. http://{serverURL}/{instance name}/groups/public/documents/graphic/oly_088631.jpg (search for the file in UCM and copy the link from the search result dialog).
A better way is to use SSXA - see this manual http://download.oracle.com/docs/cd/E17904_01/doc.1111/e13650/toc.htm - when your html will be constructed from a template and the image will be defined through a placeholder (you will learn to use placeholders in Chapter 3 of the manual). Since PS3, SSXA should be usable for Webcenter pages.

Access Anywhere file conflicts

Similar Messages

Maybe you are looking for