Access app crashes and does not want to open. What a reason?

I often use one Access application which consists of many calculations in VBA code. One “perfect” day this application simply crashed while running. And after this event everytime I try to open it it crashes and closes. I suppose that
this issue somehow related with an excessive file size. I thought about all the created and then deleted data and I can’t be sure that Access make this space free again. So, just in case I set all temporary objects to nothing, but with no result. Maybe I can
convert it somehow or compress the file? Any suggestions will be appreciated.

Of course a size of file can be a reason. Access isn't really very capable when it comes to handling large volumes of data. If i am not wrong 2003 and 2007 Access versions have about 2Gb size limit. If your file is near this limit point
then maybe really it is time to split the database, as Bill said.
Also sometimes a bad written VBA code can be a cause of some problems. So, you should be more careful with it.
If the problem still exist, then maybe you need to run any third-party software. I would suggest Recovery Toolbox for Access
https://access.recoverytoolbox.com/ Hope something will help you in the matter. 

Similar Messages

  • TS1424 My itunes has locked up and does not want to open.  I have tried redownloading and have tried to repair it twice.  Suggestions?

    My itunes has locked up and does not want to open.  I have tried re downloading and repairing twice.  Suggestions?

    I had a very similar problem.  Eventually I figured out it was related to Quicktime.  I installed the latest Quicktime and Itunes suddenly worked.
    I had tried installing, repairing, removing, reinstalling, etc of both Itunes 11 and 10.7.

  • HT3775 I have a quick time file movie which I was able to open on quick time but now it does not want to open. what can i do? thnaks

    I have a quick time file movie which I was able to open on quick time but now it does not want to open. what can i do? thnaks

    Now that i can view the mpg file on my imac using VLC player, how do I save the disc to my desktop?
    I need to then cut and save 15 sec visual bytes to my desktop  (in a common video file format so that I can enter them into some editing software.
    All assistance appreciated 
    thanks,
    Peter

  • I went to iCloud and my mail doesn't recognize my password but even worst my iTunes does not want to open because it says my library is blocked somewhere on a hard disk where I  have no access ...

    I went to iCloud and my mail doesn't recognize my password but even worst my iTunes does not want to open because it says my library is blocked somewhere on a hard disk where I  have no access ...
    HELP HELP

    To confirm, your existing mail client isn't communicating with your existing and remote mail services at Dreamhost? Which mail client are you using (Apple mail?), and how is mail on the client set up?
    It would initially seem that your client is still referencing the server, either for its inbound or outbound mail. (And I'm not sure how unplugging the server helps here, unless there's some sort of a configuration issue, or a duplicate network address or such.) This would usually be something within the configuration of the mail client.
    The Mac OS X Server is significantly easier than the many other servers and server operating systems I've dealt with over the years, but it requires reading the manuals and/or some knowledge of networking and of server environments.
    Small shops and home folks without the time or inclination to "spin up" on these server areas can be well-served with some help initially configuring the server. Servers are different from clients. Stuff that you're implicitly used to using when you're running a client -- the DHCP server, for instance -- are what the servers provide you with.
    As for Mac OS X Server and particularly if you head outside of the default settings and sequences and off into the customizations, which is what has happened here, you might want to engage some assistance. Not just for the direct and obvious initial set-up sequence, but also for getting you set-up and started with backups and other such tasks. Before you get too deep in here and get too much underway and too much saved on your disks, do seriously consider getting somebody in to help set this box up for you.
    Mac OS X Server is not "no IT", but it is rather closer to "less IT" than most. Particularly once you get it configured and running.

  • I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?

    I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?
    I have tried back ups and  restoring, resetting, and even updating the pages app. And nothing has worked.

    I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?
    I have tried back ups and  restoring, resetting, and even updating the pages app. And nothing has worked.

  • I have iphone 4 software version 6.1.3 ,suddenly i waked up and i noticed that some pf my apps does not want to open ,please any help !!!

    i have iphone 4 software version 6.1.3 ,suddenly i waked up and i noticed that some pf my apps does not want to open ,please any help !!!

    Do you have a backup?  If so you could try restoring from that.  Anything you created since the backup was made will be lost.
    These are the basic troubleshooting steps
    Troubleshooting
    Restarting your device
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
    Press and hold the Sleep/Wake button until the Apple logo appears then let go.
    Backup, reset, restore on icloud or itunes or restore as new. 
    Place the phone into recovery mode by doing this
    If this fails to fix the problem make an appointment and visit and Apple store or an authorised service provider

  • HT1212 what should I do if my Ipod touch show me the appel sign and does not want to go further than that

    please asking some help
    my ipod touch felt down and since show me the appel sign and does not want to go further but it's charging correctly. when I connect it to the computer it's ask for a passcode that i dont remember.

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • My ipod touch is in dfu mode and does not want to turn on.

    my ipod touch is in dfu mode and does not want to turn on.

    What happens when you connect the iPod to your computer and restore viia iTunes?

  • Admission charge my iPod is turned a corner, and Does not want to load composure?

    Admission charge my iPod is turned a corner, and Does not want to load composure?

    Could English not be your native language since you question does not make sense? If so try posting in your native language. Otherwise clarify.

  • My iphone 3gs suddenly turned off and does not want to turn back on.

    My iphone 3gs all of sudden turned off and does not want to turn back on.

    Charge it with a wall charger for 15 minutes, then hold the HOME and SLEEP buttons until an Apple logo appears, about 10 seconds.

  • My iphone 5c switched off and does not want to switch back on?

    Hi all,
    I need some help please... my phine switched off and does not want to switch on.
    I have charged it on my computer for at least an hour yet there has been no luck. It is only about 3 months old.
    Regards
    Nakkie

    Thank you Razmee209,
    This solved my question, I tried it earlier but I guess I did not hold it in long enough.
    Thank you so much.
    Regards
    Nakkie

  • Hello I'm on a Mac I did an update of my system and dreamweaver does not want to open I Error 150: 30 thank you for contacting support could someone tell me what to do

    hello
    I'm on a Mac I did an update of my system and dreamweaver does not want to open I
    Error 150: 30
    thank you for contacting support
    could someone tell me what to do

    What is the complete error message?
    If this is a licensing issue, try this:
    http://www.adobe.com/support/contact/licensing.html

  • My IPad just shut down and does not want to start again?

    My IPad just shut down and does not want to start again....what can I do?

    Assuming that the battery isn't empty (it can take up to 10 or 15 minutes charging before it responds) then have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • HT204365 Hi  I wonder if you could please assist me. I tried the online 'contact us" I  chose my iPad - but when I need to chose the second part - it does not give  me any options - hence I cannot go further?   My kindle does not want to open on my iPad.

    Hi
    I wonder if you could please assist me. I tried the online 'contact us" I
    chose my iPad - but when I need to chose the second part - it does not give
    me any options - hence I cannot go further?
    My kindle does not want to open on my iPad. When I touch it - a grey screen
    with kindle written in the middle appear for a few seconds. Then goes away.
    I have restarted the iPad - still the same? What else can I do?
    Thanks
    Maryna

    Judging by the reviews of the current version of the Kindle app you aren't the only one haveing problems with it - it looks like Amazon need to fix something with the app.
    Have you tried closing the Kindle app via the iPad's multitasking bar and seeing if it works when you re-open it ? Double-click the home button to open the taskbar, and then swipe or drag the Kindle app's screen from there up and off the top of the screen to close it, and click the home button to close the taskbar.
    You could also try deleting the app and redownloading it via the Purchased tab in the App Store app on it (you will then need to redownload your books in the app, assuming that it opens).

  • My Aperture Library does not want to open.

    Hi Guys,
    I am trying to Reference my Aperture Library, so that I keep all my RAW (original) files on my external hard drive, and only work on the Version files in Aperture.  I am having a BIG problem with it.  My Aperture library does not want to open now at all....
    Can someoen please guide me through this, step by step??

    Hi Frank,
    Well, I just switched back to how it was now, so everything works as normal.
    I can tell what I want to do, though.
    I am currently working on the Aperture Library IN APERTURE, so when I import HUGE RAW files (1000x at a time), it will tell me very quickly that there is not enough space.  So what I would like to do is:
    I would like my library to look like this:
    I want to import EVERYTHING and KEEP THEM THERE for ever.....
    Because at the moment, I work on my RAW files, I export them as:
    -RAW
    -With watermark
    -Without watermark
    onto my HardDive in folders.
    Then I delete them off my library IN Aperture, because I need to, there is not enough space.
    So when someone contacts me and they want 10 images of eg.Street food of Phuket, that are HIGH resulotion, or made b/w or whatever, then I have to re-import a RAW to re-edit it to what the client wants.
    Do you understand were I am going with this??
    So now, I woud like to know, HOW to put my Aperture Library on my harddrive, and keep all files IN APERTURE so I can work on them whenever I need to, and of course export them as I want, but still keep them in Aperture.
    But I am having problems with this whole referenced thing and in moving my library to my HD.  I have tried dragging my Aperture Library (in Pictures) to my HD, it copies, and then when I hold down the OPTION key and open Aperture, I go to Other Library:
    and choose my Aperture Library on my HD which I have copied from PICTURES:
    Then I get this.....
    And this is where I STOPPED..........
    I really appreciate you helping me Frank, thank you so much!!!!!!
    Lourika

Maybe you are looking for