Access applications only for specific users

In our production server, we have some testing. But we cannot put the application down. But at the point i want only 2-3 users to access applications.

Hi user;
Please check:
11i - R12 - How To Lock Users Out Of E-Business Suite And Allow Specific Users [ID 605538.1]
How To Prevent (LOCK) Users From Logging In To Keep Them Out Of Applications As Needed? [ID 964070.1]
Hope it helps
Regard
Helios

Similar Messages

  • Junk characters in email body only for specific user IDs

    While sending mail from SAP I am using
            SENDER = CL_SAPUSER_BCS=>CREATE( LV_SENDER_ADD ).
            CALL METHOD SEND_REQUEST->SET_SENDER
              EXPORTING
                I_SENDER = SENDER.
    now while using 'User1' and 'User2'  in LV_SENDER_ADD give a perfect result.
    But while using 'User3' and 'User4' in LV_SENDER_ADD sends Junk chars in the email body
    ST05 Trace Results show below mention lines in red.
    hh:mm:ss:ms       Type        Lasts(us)       Object                 Text                                           
    19:05:07:451      CMOD          - - -         rstscb_call_back       Parameter:                                                                         
    19:05:07:451      CMOD         - - -        rstswsf_was_stor      Parameter:                                                                         
    19:05:07:451      CMOD              2       rstswsf_was_stor      Parameter:                          Comment:   Returncode: 0                       
    19:05:07:451      CMOD              9       rstscb_call_back      Parameter:                          Comment:   Returncode: 0                       
    19:05:07:451      CMOD         - - -        rscpi_init            Parameter:                                                                         
    (I am converting the XSF output of Smartform  and SCP_TRANSLATE_CHARS to translate smartform output into HTML)
    all the above four user have SAP_ALL authorization.
    'user4' is created as a copy of 'user1'
    Checking the Type CMOD says that they are call to 'C' routine 'kernal calls'
    the above code is executed withe the user id of user1 2 3 4  and all of them give the same results.
    when ever the sender is user1 or user2 the transmission is successful else. sends junk chars.

    Could you tell us why/how you use SCP_TRANSLATE_CHARS?
    Do theseusers have same language/country in their profile?

  • Applications only for root are displayed even with user login

    I am using MBP Pro with OSx 10.7.3. I use admin account. Recently I enabled root account and then disabled it back again. Since then I am seeing applications only for root and not for admin even with admin login. If I go to /Users/<admin username>/Library/Preferences, I can see that the applications has relevant files over there. When I looked more carefully I observed that, I am able to see the applications installed for the root only and not for the admin user. Is there any way to corrrect this?

    This particular discussion group is for Classic Mac OS.  Your question would be better suited in the OS X Lion group (https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion).

  • DATA_OFFSET_TOO_ LARGE for only a specific user

    Hi,
    The user is trying to export data from MCAF into a local file. This action results in program termination, its only for his user id. It works for all the user ids the basis guys had a look at it and they said everthing is ok on the authorization side. Im confused, please let me know...
    Thanks,
    Sukumar.

    Hello,
    Let's be clear on this.
    User XXX has a problem, and he is the only user to have this problem.
    If you copy user XXX to YYY, then user YYY does not have this problem.
    Are you saying that if you delete XXX and then rename YYY to XXX, then user XXX still has the same problem?
    If so, contact OSS. If not, then delete XXX and rename YYY to XXX.
    Regards
    Rick Bakker
    Hanabi Technology.

  • Accounts search not working for only the specific user

    Hi friends,
      We have configured E.P 7.0 with CRM 5.0 and configured  CRM PCUI business package.
    We have role called <b>accounts abd products</b> in portal. So accounts can be searched in this role.
    Now our severity issue is for one of the super user,for ex su1,  accounts search is not working in portal  but the same is working in CRM GUI.
    for example if we search for an account 233445(or any other account) in portal its showing no data found but if we search with the same criteria data is displaying CRM GUI.
    We have checked with other 2 super ids. Both ends portal and gui search is  working fine.
    Am unable to figure out whats the cause of the issue as search is not working only for one user su1 .
    we have checked by restarting the server also to clear the memory cache.But still search is not working in portal.
    Could anyone of u please advice ASAP as this is severity issue.
    Thanks & Regards
    Sireesha.

    Hello,
    Go in debugging in the query method of your MAC to see why the BP is not selected (or deleted) before going to the read method.
    Regards,
    Fred

  • How can i open period for specific user in OB52.

    Hi Expert,
    How can i open period for specific user in OB52.  As 'Authorisation Group' field is there in OB52, how can i use this field to restrict the specific user to post for particular period.  How can i creat authorisation group and where can i assign it to the particular user...
    Please let me know?
    Thanks and regards,
    Sam.

    Hi,
    Here is the detailed process as outlined in SAP help.
    Procedure
    If only a limited set of users is to be able to post in a particular posting period, proceed as follows:
    Add the posting period authorization (authorization object F_BKPF_BUP) to the authorizations of the selected users. Assign an authorization group (e.g. '0001').
    Enter the account type '+' for the posting period variant to which the restriction is to apply. Enter the period(s) whose use is to be restricted in the first period, those which are available to all users in the second period, and the authorization group (e.g. '0001') in the last column.
    Examples
    A posting period can be successively restricted. If, e.g. 10 users have the posting period authorization with authorization group '0001', and 3 of these 10 users also with authorization group '0002'.
    If the period is only to be accessible to the 10 selected users the authorization group '0001' is entered in the posting period variant. Access can later be restricted to the remaining 3 users by entering '0002'.
    Thanks
    Venkata Ganesh Perumalla

  • How to apply Software Restriction policy for specific user in local group policy object ?

    I am working on implementing user based software restriction policy programmatically for local group policy object.
    If i create a policy through Domain Controller,i do have option for software restriction policy in user configuration but in local group policy editor i don't have option for that.
    When i look for the changes made by policy applied from Domain Controller in registry, they modifies registry values for specific users on path HKEY_USERS\(SID of User)\Softwares\Policies\Microsoft\Windows\Safer\Codeidentifiers
    They also have registry.pol stored in SYSvol folder in Domain Controller. When i make the same changes in registry to block any other application, application is getting blocked.
    I achieved what i wanted but is it right to modify registry values ?  
    PS:- I am using Igrouppolicyobject API

    I achieved what I wanted but is it right to modify registry values ?
    You also can modify a registry programmatically based policy. Check this:
    http://blogs.msdn.com/b/dsadsi/archive/2009/07/23/working-with-group-policy-objects-programmatically-simple-c-example-illustrating-how-to-modify-a-registry-based-policy.aspx
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Cellular data only for specific apps

    Is there a way by which i can enable cellular data only for specific apps? Lets suppose i want only mail and viber to run on cellular. So how do i enable cellular network only for viber and mail

    Hello all,
    I have been using the iPhone 4S for about a year and I never had problems untill a few days back. Since about a week, my 3G settings for applications installed automatically reset.
    Path >> iPhone screen >> Settings >> Mobile(Cellular) >> Use Mobile Data For >> "List of all apps installed"
    Against each application, you have an option to either enable / disable the mobile data usage:
    Eg:
    App Store          (swipe left to disable || swipe right to enable)
    Contacts          (swipe left to disable || swipe right to enable)
    Facebook          (swipe left to disable || swipe right to enable)
    Facetime          (swipe left to disable || swipe right to enable)
    Weather          (swipe left to disable || swipe right to enable)
    You Tube          (swipe left to disable || swipe right to enable)
    etc...
    Problem:
    If I don't want You Tube to use mobile data, I would normally swipe left to disable thus the application will not start / stream any music if its on 3G/4G. Since a few days, whenever I disable the option for any app... go back to the main screen and recheck the settings, I see its enabled again!
    The error I see when I start the app is:
    MOBILE DATA IS TURNED OFF FOR "YOU TUBE"
    You can turn on mobile data for this app in settings
    <Settings>     <OK>
    When I go back to settings... I see the option is enabled.
    Now I dont know what and how this happened all of a sudden. I have tried resetting the network settings for my iPhone, and it has not helped me.
    My iPhone is updated to OS 7.0.4 and all apps are updated.
    Anyone can help me on this error and how do I fix this?
    FYI... I have no problems connecting to WiFi at all!

  • Find Label Missing in Advanced Search For Specific User

    for specifi users FIND label is showing but some of the users in advanced search this find label is missing . top of the applictaion it is there
    plz let me know why this is problem is coming
    find button should visible to all users......................
    give me repaly ASAP

    Hi
    CRM 5.0
    its not related to application,modification ..but my problem is the find label is working for some of the users.but some of the users find label is not there,
    plz let me know where i have to make corrections for this problem........

  • Need to give REVOKE CLOSE option in CO02 only for selective users

    Hello,
    Need to Restrict Revoke Close Option in Tcode CO02 (Under Functions - Restrict Processing - Revoke Close) through Role/Object Level.  Can any one suggest how to control this .    Need to give access for CO02 for 5 Users , but only 2 Users can able to do Revoke Close Option , other 3 Users should not able to do this activity.
    BR,
    Murali

    There is no authorization object as B_USERSTAT_T , but there is a authorization object as B_USERSTAT . I tried to create a Temporary Role and manually assigned this Object .  In this object there is no way to control REVOKE Close option . 
    But there is one way noted in Google to restrict Revoke Close option .
    1.Goto BS22
    2.Select the system status TEC0 (I0045) & just duble click it,
    3.Maintain the Revoke technical completion (BUTA) =Forbidd (not allowed),
    But if i set the above Parameter ,  this will restrict Revoke Option for all the users .  I need to control ONLY for selective users .  I can set some value in user data for those users  , based on that i can write some coding to restrict , but i want to know where to write this code ....  I tried in some area , but it never works.
    Can any one give some idea to fix this issue.
    BR,
    Murali

  • Data Level security for specific Users

    Hi,
    Can you please suggest some ideas on by-passing the Data Level security for specific users or specific group?
    Currently, we have data level security defined on a group permissions for one group and for people belonging to another group, the security should not apply and they should see entire data.
    But, key thing here is that, the user belongs to both the groups.
    Any ideas helps.
    Thanks,
    Chandu.

    So you are saying you want a user to belong to a group with data-level security filters, but you don't want the filters to apply to that user?
    Why are they in the group then?
    Are the data filter defined with variables or are the hard-coded?
    If variables, you may be able to put logic in initialization block to set the variable appropriately for specific users.
    I'd rethink the security model - when I define data level security filters, I tend to force users to only belong to a single group/role.

  • Log transactions for specific users

    Hi, How can I get the log for specific users, such as SAP_ALL : I want to know which transactions they have accessed in the last month for example or if they have accessed to a specific transaction.
    Thks !

    Hi,
    try tranction ST03N (Workload Monitor)and select "User Profile" in the Analysis View. There, you can see a list of Users. Double click on any of them to see the accessed transactions.
    Kind regards
    Dirk

  • Disable sound for specific users

    How do I disable sound for specific users?

    Theoretically if the user's not in the audio group, he shouldn't have access to sound devices.
    $ ll /dev/snd/
    total 0
    drwxr-xr-x 2 root root 80 Oct 2 19:30 by-path
    crw-rw----+ 1 root audio 116, 2 Oct 2 19:30 controlC0
    crw-rw----+ 1 root audio 116, 8 Oct 2 19:30 controlC1
    crw-rw----+ 1 root audio 116, 7 Oct 2 19:30 hwC0D0
    crw-rw----+ 1 root audio 116, 13 Oct 2 19:30 hwC1D0
    crw-rw----+ 1 root audio 116, 14 Oct 2 19:30 hwC1D1
    crw-rw----+ 1 root audio 116, 15 Oct 2 19:30 hwC1D2
    crw-rw----+ 1 root audio 116, 16 Oct 2 19:30 hwC1D3
    crw-rw----+ 1 root audio 116, 4 Oct 4 09:12 pcmC0D0c
    crw-rw----+ 1 root audio 116, 3 Oct 4 10:13 pcmC0D0p
    crw-rw----+ 1 root audio 116, 5 Oct 2 19:30 pcmC0D1p
    crw-rw----+ 1 root audio 116, 6 Oct 2 19:30 pcmC0D2c
    crw-rw----+ 1 root audio 116, 9 Oct 2 19:30 pcmC1D3p
    crw-rw----+ 1 root audio 116, 10 Oct 2 19:30 pcmC1D7p
    crw-rw----+ 1 root audio 116, 11 Oct 2 19:30 pcmC1D8p
    crw-rw----+ 1 root audio 116, 12 Oct 2 19:30 pcmC1D9p
    crw-rw----+ 1 root audio 116, 1 Oct 2 19:30 seq
    crw-rw----+ 1 root audio 116, 33 Oct 2 19:30 timer

  • On-Demand Process Running only for authenticated user

    I have noticed that an on-demand process is running only for authenticated users - for example a download of a document. For public users it doesn't. I remember seeing a similar question related to ajax on demand in this forum but couldn't locate the thread. Does anyone knows why the process is not running for not authenticated user? The result of a download for a public user is a blank page where the authenticated user gets the file by clicking on the same link.
    Thanks in advance,
    Denes Kubicek
    http://deneskubicek.blogspot.com/
    http://htmldb.oracle.com/pls/otn/f?p=31517:1
    -------------------------------------------------------------------

    Hello Denes,
    Please check if the following can help you -
    Re: AJAX on public page
    Re: Calling an application level on-demand process from JavaScript
    Regards,
    Arie.

  • Lock Transaction for Specifi Users

    Dear All,
    Good Day,
    We are planning to lock the transaction for specific user who doesnot use the transaction more than 3 months.
    Please suggest me what will be the procedure.
    Thanks in advance,.
    Best Regards,
    Suresh Kumar K

    Hi Suresh,
    Your idea of restricting users in using t-code is good practice. But as of now there is nothing like you can restrict user by locking t-code only for tht user/users alone.
    1. You can lock the T-code but this will affect entire system.
    2, You can remove t-code from the role, but this affect other user and if you wanted to make another role for only this user it will start getting to be tedious job, since you have to delete some roles create some other and alos user may use some t-code once every quarter for some of quarter end results and you have to seperate these t-code from others which was not possible, this will not workout so easily.
    The only option could be probably if user doesnot login for more than 3months just lock him.
    Regards...

Maybe you are looking for