Access code with CCM in a centralized deployment

Hi,
I've got a centralized deployment with CCM6 and two sites. I used two H.323 gateways and set the PSTN access code to 9. I defined my route pattern and put my gateways in a route list. My problem is that I've got most of the calls from site B routed the site A gateway. I've thought of two access codes but what if i've got 100 sites to deal with.
Please advice,

this is not a Video over IP question, please use the NetPro categories appropriately
use CSS and partitions to route the calls to the right GW depending on the source of the call
HTH
java
if this helps, please rate

Similar Messages

Access Codes in CCM 3.3(4)

Hi, i have a 3.3(4) 2 server cluster of callmanagers, and i need to restrict the calls depending of the users with access codes like in a PBX, i would want to know if this is posible. Until i know i can do this with partitions and calling search spaces, but the phones stay free to dial out to any external number.
Thanks
Luis Felipe

Luis,
Check this link
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/3_3/sys_ad/3_3_4/ccmfeat/fsfaccmc.htm
You can enable FAC and CMC on 3.3.4.

Passed Microsoft exam- Received MCID but there is no Access code

Hi ,
Recently i completed Microsoft certification. I received a mail with MCID, and they havn't provided access code. however in the site there is an option we can generate temporary access code with MCID. i tried it but it is giving error like " unable
to generate temporary access code". i tried for past 3-4 days. can someone help me how to get my access code with MCID.

Hi, Nagaraju.
You can contact your Microsoft regional office. You can either email
[email protected] or use the following page to find your regional Microsoft office and call them directly:
http://www.microsoft.com/learning/en-us/help.aspx.
Have your MCP ID ready.
Good luck!
Best wishes, Davin Mickelson

PSTN access code when centralized deployment with CCM

Hi,
I've got a centralized deployment with CCM6 and two sites. I used two H.323 gateways and set the PSTN access code to 9. I defined my route pattern and put my gateways in a route list. My problem is that I've got most of the calls from site B routed the site A gateway. I've thought of two access codes but what if i've got 100 sites to deal with.
Please advice,

this is not a Video over IP question, please use the NetPro categories appropriately
already answered your other post, please do not duplicate posts

Apache Error Log mod_security: Access denied with code 400

Hi
I am seeing the Access denied with code 400 errors in the apache log's after applying CPU Patch updates below into a Dev/TEST environment
RDBMS Patches: 9032412 & 9352191 & post steps below:
@?/rdbms/admin/dbmsaqds.plb
@?/rdbms/admin/prvtaqds.plb
@?/rdbms/admin/prvtaqiu.plb
Java Fix > [ID 1082747.1]
E-Business Suite Patches & post steps below:
9323613 & 9506302
Compiled Forms PLL files using adadmin to solve the known problem below
ORA-04062: signature of package "APPS.FND_HELP" has been changed
ORA-04062: KEY-HELP trigger raised unhandled exception ORA-04062.
the error can be replicated by following the steps below:
Log in to Oracle Apps E-Business Suite (11.5.10.2) select Report Management Information Responsibility and then transaction reports. (Opens Oracle Discoverer 4i Viewer) > select either Period to date or Year to date and then select any department & and any period (date) and then apply parameters:
Error message in browser
This error (HTTP 400 Bad Request) means that Internet Explorer was able to connect to the web server, but the webpage could not be found because of a problem with the address.
For more information about HTTP errors, see Help.
Apache log shows:
error_log shows the following:
[Fri Jul 8 10:52:08 2011] [error] [client 10.180.225.5] mod_security: Access denied with code 400. Pattern match "!^([-_@|#!=A-Za-z0-9/ :.$/(/)]){0,255}([-_@|#!=A-Za-z0-9/ :.$]){0,255}$" at ARGS_NAMES. [hostname "loadbalancer.webdomain"] [uri "/discoverer4i/viewer"] [unique_id ThbTSAq0BRQAABrfK7M]
access_log shows the following:
IP ADDRESS - - [08/Jul/2011:10:51:39 +0100] "GET /disco4iv/html/images/shadow_bottom02_leading_ltr.gif HTTP/1.1" 200 861 0
IP ADDRESS - - [08/Jul/2011:10:51:39 +0100] "GET /disco4iv/html/images/seperator.gif HTTP/1.1" 200 42 0
IP ADDRESS - - [08/Jul/2011:10:51:39 +0100] "GET /disco4iv/html/images/arch_blue_bottom_ltr.gif HTTP/1.1" 200 984 0
10.180.225.5 - - [08/Jul/2011:10:51:39 +0100] "GET /disco4iv/html/images/white.gif HTTP/1.1" 200 37 0
IP ADDRESS - - [08/Jul/2011:10:51:39 +0100] "GET /disco4iv/html/images/bar_blue_leading_edge_middle_ltr.gif HTTP/1.1" 200 111 0
IP ADDRESS - - [08/Jul/2011:10:51:39 +0100] "GET /disco4iv/html/images/bar_blue_trailing_edge_middle_ltr.gif HTTP/1.1" 200 129 0
IP ADDRESS - - [08/Jul/2011:10:51:39 +0100] "GET /disco4iv/html/images/shadow_bottom_leading_edge_ltr.gif HTTP/1.1" 200 862 0
IP ADDRESS - - [08/Jul/2011:10:51:39 +0100] "GET /disco4iv/html/images/btopshadow.gif HTTP/1.1" 200 44 0
IP ADDRESS- - [08/Jul/2011:10:51:39 +0100] "GET /disco4iv/html/images/bshadow.gif HTTP/1.1" 200 59 0
IP ADDRESS - - [08/Jul/2011:10:52:08 +0100] "POST /discoverer4i/viewer HTTP/1.1" 400 227 0
I have tried to follow a number of metalink notes but unable to resolve this issue, metalink notes looked at are:
976473.1
389558.1
1313128.1 Patch 10324904 applied
394587.1
389558.1 Patch 5107107 applied
1143882.1
376992.1 Patch 3950067 applied
Any ideas or suggestions most welcome
Thank you
Regards
Arfan
Edited by: user1717313 on 08-Jul-2011 04:59

Hi JD
I have tried the steps i.e stop apps tier, run adconfig on apps tiers and then started services on apps tiers and can replicate the error
thanks
Arfan
Hi Helios
I checked note 1080465.1 Patch 9506302 has been applied & Recompile all Forms PLL files using adadmin.
I ran the sql feom the note, output below
SQL> select text from dba_source where name='FND_HELP' and line <3;
TEXT
package Fnd_Help AUTHID CURRENT_USER as
/* $Header: AFMLHLPS.pls 115.22 2009/10/12 12:56:58 nchiring ship $ */
package body FND_HELP as
/* $Header: AFMLHLPB.pls 115.115 2010/03/19 06:45:24 nchiring ship $ */
Thanks
Arfan
Edited by: user1717313 on 08-Jul-2011 05:04

Mod_security: Access denied with code 400 in R12

Hi ,
I'm getting "Page cannot be found" error during my below navigation in R12
-- Steps To Reproduce:
The issue can be reproduced at will with the following steps:
1. Responsibility: Oracle Configurator Developer
2. Create Rules, Apply and Save
3. Get error
EBS R12.1.2
DB 11.2.0.1
OS RHEL 5
following is extract from my Apache log
[Fri Nov 12 08:40:40 2010] [error] [client 192.168.26.144] mod_security: Access denied with code 400. Pattern match "!^([-_|#!=A-Za-z0-9/ :.$()]){0,255}$" at ARGS_NAMES. [hostname "indstqebs02.indalfab.local"] [uri "/OA_HTML/OA.jsp?Action=EditNode&stackLevel=2&page=/oracle/apps/cz/developer/model/rules/webui/RuleTmpPG&czWhichRule=XCP&czRuleId=2604&czParentRuleFolderId=1800&czModelId=1420&ObjectType=XCP&ReturnLinkURL=OA.jsp%3FOAFunc=CZDEVRULESTRUCTFUNC&selection=0_1_4_&_ti=210565512&retainAM=N&addBreadCrumb=RP&oapc=44&oas=qUuMo8fwvn7jpCTNnv0TYQ.."] [unique_id TNzveH8AAAEAAAHrA1w]

Hi;
Did you check all? Those note are for R11 but as you can see Applies to: Information in this document applies to any platform. If the notes doestn mention any patch than i belive you can follow docs.
If those 12 docs dont help you than i suggest log a SR
By the way in your post:
1. Responsibility: Oracle Configurator Developer
2. Create Rules, Apply and Save
3. Get error
What you get error? What is exact error message? Maybe we can find solution by this error message? Did you also check application log file?
Regard
Helios

Help please with access code to get into restrictions to delete apps.

I have an iPad 2. I recently upgraded to 7.0.4. The new system requires me to go to settings/general/restrictions to delete any apps I do not wish to keep. This worked fine at first, after the first system upgrade to 7.0. After the last update, 7.0.4, I find that when I go to restrictions it pops up and asks me for an access code. I only have one access code that I have ever used. It will not open with this passcode. He has locked me out 18 times and requires me to wait an hour to try again. My usual passcode works on everything else! I have tried to reset passcode, it does the same thing. I have searched and searched and the answers I'm finding are pretty drastic (like backup and reset everything...yikes!). What am I missing here?

Follow the instructions in iOS: How to back up your data and set up your device as a new device http://support.apple.com/kb/HT4137 to restore the device to factory settings.
Once you have setup the device as a new one, you can then sync it back with your iTunes account and all your music, apps, contacts and any other content sync'ed with iTunes will be loaded on the device. Any content that is stored only on the device and not sync'ed with iTunes, like app logins or data, will be lost during this process. Be forewarned that this is a long process and can take a couple of hours or more to complete. This can be painful, but it is necessarily so to prevent users from working around the security settings. After the restore is complete, you can setup a new Restrictions passcode. Make a note of the passcode to avoid this situation in future.
 Cheers, Tom

Mod_security: Access denied with code 405. Pattern match "!(GET|HEAD|POST)

Hi all,
After Cloning facing an issue
mod_security: Access denied with code 405. Pattern match "!(GET|HEAD|POST)"
and not able to get the login prompt
EBS: 12.1.3
DB:11G
Please help as this is urgent.
Regards,
Raj.

Hi Hussein/Srini,
My OS details are as follows
Source OS : OE Linux 5X
Target : REHL
DB : 11.2.0.3
In my previous cloning the R12 login URL was not getting redirected to https from http. This backup was given by client last week and I completed the cloning and post cloning procedures without any error, but unable to login as the page is redirecting to https:/hostname:port/OA_HTML/AppsLogin.
I have done the following so far, but the issue is not getting resolved.
1) Generated JAR files using ADADMIN (Force)
2) Compiled JSP
3) Ran autoconfig multiple times without any error in both db and application tiers.
4) DB alert log did not have any error.
5) Executed relink all from APPL_TOP
6) Able to launch http://XXXXXXXXX:XXXX/forms/frmservlet?
Kindly help me out on this
Regards

Question about "mod_security: Access denied with code 400"

Dear All,
After merged clone's configure the application tier server nodes. I can get in form window, but after merged clone's finishing tasks:1.Generate JAR files / generate message files / relink executables / copy files to destination. I can't open form window any more.
The apache error_log will show below
mod_security: Access denied with code 400. Pattern match "!^([-_@|#!=A-Za-z0-9/ :.$]){0,255}([-_@|#!=A-Za-z0-9/:.$]){0,255}$" at ARGS_NAMES. [hostname "hcp11et30.liteonit.com.tw"] [uri "/oprocmgr-service"] [unique_id TugHyQoG2lsAAFOwD84]
Then referred Note 389558.1, and can login normally, But the same error messages still keeping reporting in error_log.
Please advise?
Thanks,
Jackie

Hi;
Did you check below notes:
Access Denied With Code 400 When Starting Forms or Calling MOD_PLSQL [ID 394587.1]
Why do we see Error: mod_security: access denied with code 400 IN OCO pages? [ID 976473.1]
Regard
Helios

Access 2000 with VBA code doesn't work in Access 2013

I have a database that was created in Access 2000 with lots of VBA code to pull data from SQL for reports. When I try to run a report in 2013, I get 'file not found". When I go into debug, it appears the forms for the reports are not being found.
How can I fix this?

Good Morning MariS2,
Did you verify the change in the connection type?
Did you check all your references which are changed for the new version of Access?
Just takes a click to give thanks for a helpful post or answer.
Please vote “Helpful” or Mark as “Answer” as appropriate.
Chris Ward
Microsoft Community Contributor 2012

Ricoh Aficio MP C4501 with access codes for color printing

Hi,
I read the discuss called "Ricoh 3245C with access codes for color printing", and I have a similar problem with a Ricoh MPC4501 printer. The printer is connected to many Windows PCs and my brand new iMac. It requires just User Codes authenication. PostScript is not installed on the printer (could this be the problem?). I've tried all the suggestions brought up in the mentioned discussion but I still can't print. It seems like the printer is not connected to the Mac. Here are the answers to the questions asked in the previous discussion:
Is PostScript module installed?
No, I guess. PS is not one of the languages included on the Configuration Page.
What languages does your printer understand?
RPCS [3.10.14], PCL 5c [1.02] and PCL XL [1.02]
What drivers are you using?
I tried the one from the Ricoh site for OS10.8 (http://support.ricoh.com/bb/html/dr_ut_e/ra/model/mpc41/mpc41en.htm) as well as the driver (three downloads) from Linux (http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/pxlmon o). Neither worked. It might be helpful to mention that the Linux driver enabled me to print to a Ricoh Aficio MP 4001 that doesn't require authentication.
How are you entering your User Code?
Depending on the application. For Adobe apps, which are my main concern, I would have to click on the Printer button in the Print dialog to open the system Printer dialog, then enter the user code there under Job Log. I had to use the script provided in the previous discussion (http://webpages.charter.net/mbroughtn/beta/RicohUserCodes.zip) to add my User Code.
How are you connecting to the printer -- what protocol?
I'm not sure. I didn't find any of the protocols cited in the previous discussion on the Configuaration Page. If it helps, I know that the printer has an IP address on the network. And as I mentioned, it's mainly connected to many Windows PCs.
Any help is appreciated. Thanks.

Can't help with user codes, but I suggest you try IP HP jetdirect first whenever you add an enterprise net printer. You could always look on a windows computer for printer port configjration. There, you will find jetdirect called raw port 9100 protocol.

Ricoh 3245C with access codes for color printing

Hello,
We have a Ricoh 3245C and some MacBook Pro users with OS X Snow Leopard. The printer is configured so that a user needs an access code to print in color, but anyone can color in black and white.
When Mac users try to print, the print queue says the job is paused, and the job never prints. It doesn't matter if the document is color or B and W.
Help.
Thanks,
Josh

Matt Broughton wrote:
I find this hard to believe.
Hi Matt, et al. Thanks for the replies.
Just to re-iterate what I wrote above, we are using a Ricoh Pro 906 EX printer, and have attempted authenticated printing on the Mac with PPD's obtained from both the Ricoh website as well as the open source versions you reference. (Not sure what the "job log" reply above was about.) In that effort, we wrote to Richo at solutions(at)ricoh-usa.com to ask about authenticated printing features on the Mac. I will spare the group the entire discussion thread, but here are the relevant exchanges.
'--- My original inquiry - Sept 22, 2010 ---
Hello,
Our office has a Ricoh Pro 906 EX printer and we are having a lot of trouble getting our Apple Mac users setup to print. After downloading your latest Mac/OSX driver software, we still do not see a place to enter User Codes and Passwords for individual users like the Windows driver software has. As a result, no print jobs are sent to the printer.
Basically, what we are trying to do is Authenticated Printing. I note that there are several different places where Ricoh printers ask for "User Code" or "User ID" or etc. One thing I see on our Windows machines is a place to enter Authentication credentials -- THIS IS WHAT WE NEED -- but we can't find the matching dialog box on the Mac. I included a screenshot from a Windows machine we have setup and working. I think we just need to know if the Mac supports Authenticated Printing.
Can you assist?
'--- Final Reply - Sept 23, 2010 ---
Mr. <snip>
To give you some background information, Ricoh devices can be set up with multiple forms of authentication (that is built-in to the machine) such as:
a. User Codes -- You can have up to 500 distinct user codes defined. Instead of someone inputting their User Name & Password they enter in a 4-8 digit number.
b. Basic Authentication -- You can define user names & passwords on the copier. In order to print (or copy if it's set up that way) you would have to put in both the user name and password defined on the copier.
c. Windows (Active Directory) Authentication -- You can input your Windows user name & password. Obviously you have to be a user on the domain in question.
d. LDAP Authentication -- You can input a user name & password and then the copier tries to verify that you are a user against your LDAP server. You must specify the LDAP server to use.
Based on what you explained and your screenshots I would assume that the Ricoh copier is set up with "Basic Authentication".
Without going to a lot of trouble & hassle (I.E. to convince someone to do a driver customization) the MACs do not directly support Basic Authentication. The only type of authentication + tracking solution that works with the MAC PPDs (and is built-in) are User Codes. So instead of everyone having a user name && password they would be assigned a number (4 to 8 digits) that they would input when they need to print or copy. We could look into a customized driver option, but if you are only serving 20 users it would not be cost effective. Have you considered just "upgrading" people to Windows? There may be some other solutions that Ricoh offers that may work well for you. You may want to contact the sales person for the account and they can work with you to see what options would work best.
Thank you,
<snip name>
TSSC
Ricoh Americas Corporation

Bought a 20 gift card online thru the itunes store it has charged my credit card and still no email with the access code?, Bought a 20 gift card online thru the itunes store it has charged my credit card and still no email with the access code?

Has this happened to anyone? How can I get my access code or my money back? PLEASE help me, this is for my lil boy!

Is Settings > General > Restrictions > In-App Purchases: ON (green)?
Some In-App Purchases works only with credit card.

Access Code - DELETE Statement with DISTINCTROW and T-SQL

All,
I'm trying to rewrite Access Code to T-SQL Code. I understand how DISTINCTROW works in a SELECT statement but I'm not sure of the same in a DELETE statement.
Any ideas?
DELETE DISTINCTROW Order_detail.*
FROM Order_Master
INNER JOIN Order_detail
ON (Order_Master.OrderID = Order_detail.OrderID)
AND (Order_Master.OrderPartID = Order_detail.OrderPartID)
Thanks,
MS

Could we use this syntax to delete records of two tables in same query ?
DELETE DISTINCTROW TableA.*, TableB.* FROM
TableA INNER JOIN TableB ON TableA.Name = TableB.Name
No. You can delete only one table at a time.
If you are using SQL Server 2012, you can try Merge:
create table a (id int, name varchar(10))
insert into a values (1,'aName'), (2,'ABCName'), (3,'BBBName')
create table b(id int, name varchar(10))
insert into b values (1,'bName'), (2,'ABCName'), (3,'BBBName')
declare @t table ( name varchar(10))
Merge a as tgt
using b as src On tgt.name =src.name
When matched then
Delete
Output deleted.name into @t;
delete from b Where name in (select name from @t)
Select * from a
select * from b
drop table a,b

NAC and BBSM access code management

Hello,
An organization has a network infrastructure in which a BBSM generates access codes for limited authorized time periods to allow Internet web access to wireless guests. If a guest exhausts the period he must request a new access code.
Now, if a Clean Access Server is deployed for admission control, a possible option could be to bypass posture assessment for those guest users and leave the the BBSM operation unchanged: with access code management for control and accountability purposes.
My doubt is if i could deploy some access code management capabilities in the NAC appliance, in order to move to it the access code mgmt functionality from the BBSM.
I would really appreciate any comment about that.
Thanks in advance.

Hi,
Check table 3 of the link below,
http://www.cisco.com/en/US/products/sw/netmgtsw/ps533/prod_eol_notice0900aecd805aeb23.html
Scrap that BBSM. You should be able to provide guest access w/ NAC. checkout this link
http://www.cisco.com/application/pdf/en/us/guest/products/ps6128/c1031/cdccont_0900aecd805b8b5c.pdf
Regards,
arburt

Access code with CCM in a centralized deployment

Similar Messages

Maybe you are looking for