Access Connection 5.02 stalled my Vista SP1 when its connection attempt fails

Access Connection 5.02 stalled my Vista SP1 when its connection attempt to some wireless network fails
And I some time has to kill explorer.exe to restore the response of my system
I'm using Vista SP1 on a X61 tablet
Thanks!

billbolton wrote:
For what its worth I have AC 5.02 running fine with Vista Ultimate x64 SP1 on both an an X61 and a T61 using an Intel 4965AGN card, as well as with Vista Ultimate x86 SP1 on a T60.
Cheers,
Bill
My T60 - 6371-CTO running Vista Home Premium X32 with SP1 using a wireless card "Thinkpad 11a/b/g WI_FI wireless LAN MINI PCIe US/EMEA/LA/ANZ" has many problems with AC 5.02 - disconnects when resuming from sleep or hibernate, fuzzy graphics, and sometimes a feeeze of the mouse that can be fixed by rebooting. This all started when System UPdate installed AC5.02 and PM 2.64 at the same time abpout a month ago. All problems went away when i went back to AC4.52 but kept the PM2.64 version. Your 4965 card may make the difference in being able to use AC5.02.
Pete
T60: 6371-CTO, VISTA Home Premium+SP1, 2GB....R51: 1836-Q4U,XP,1GB...600...755CD

Similar Messages

A connection attempt failed because the connected party did not properly respond after a period of time

Prior to the Increase Capacity for Outbound Network Calls update, my Azure websites running in
Standard mode experienced occasional connection attempt failed errors. Since this update the errors stopped but starting on 12/30/14, these errors started up again on both
South Central and East regions:
"A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond [IP]:80"
It occurs when attempting to consume an external web service over HTTP. This issue is not reproducible on our local environments nor did it occur with our previous shared hosting provider.
On Azure, the same web service call can result in this error or will return a response successfully.
There doesn't appear to be any pattern as to why the same call would work one time but not another.
How can this be resolved again? Any feedback is appreciated. Thanks.

Hi,
Please have a look at this article:
http://blogs.msdn.com/b/narahari/archive/2011/12/21/azure-a-connection-attempt-failed-because-the-connected-party-did-not-properly-respond-after-a-period-of-time-or-established-connection-failed-because-connected-host-has-failed-to-respond-x-x-x-x-x-quot.aspx,
it gives us several ways to solve this issue, hope this helps.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I can't seem to connect to my lion vpn, all web services I set up work well like wikis and what not. I get a security error 792 Connection attempt failed because security negotiation times out. Please help

I get error 792 Connection attempt failed because security negotiation time out. I am trying to connect a xp machine to my vpn.

I get error 792 Connection attempt failed because security negotiation time out. I am trying to connect a xp machine to my vpn.

Connection attempt failed. Please try again. Cisco AnyConnect Secure Mobility Client on Windows XP SP3 -

When trying to connect with Cisco AnyConnect Secure Mobility Client on Windows XP SP3 getting the following error:
Function: CTransportWinHttp::SendRequest
File: .\CTransportWinHttp.cpp
Line: 1170
Invoked Function: HttpSendRequest
Return Code: 806 (0x00000326)
Description: WINDOWS_ERROR_CODE
Function: CTransportWinHttp::SendRequest
File: .\CTransportWinHttp.cpp
Line: 1178
Invoked Function: CTransportWinHttp::handleRequestError
Return Code: -30015479 (0xFE360009)
Description: CTRANSPORT_ERROR_UNEXPECTED
and finally I get the following message:
Function: ConnectMgr::processIfcData
File: .\ConnectMgr.cpp
Line: 2763
Invoked Function: ConnectMgr::processIfcData
Return Code: -30015443 (0xFE36002D)
Description: CTRANSPORT_ERROR_CONN_UNKNOWN
Connection attempt failed. Please try again.
Any ideas, thanks,
Ashok.

Hi Harry,
I only wish I were more up to speed on all of the security technology. I will contact the network administrator and pass your request to him. I will let you know the results (probably later today).
Here is a little background on this issue (optional reading). All clients worked fine up until around the end of September 2013. Then, a rash of Windows updates came along. Around Sept. 20th, I noticed I could no longer connect using the VPN. So, I uninstalled (Mobility Client) but was not able to re-install as the https://site was not longer able to be reached. I got the standard Microsoft 'Diagnose Connection Problems'. So I manually installed the 'Mobility Client' but only get errors. However, I'm only guessing at the 'AnyConnectProfile.xml'. I may have the settings all wrong. Don't know.
We also noticed that all of our Windows 7 clients work fine. None of the Windows XP clients work any longer. I figured it was 'time to upgrade' all of our Windows XP clients.
Regards,
Stan

789 error.The L2TP connection attempt fail.

Hi
I configure the L2TP vpn an ASA-5520.I configured by the CLI mode.But I cant not connected to my laptop by vpn.A error is coming to my windows 7 laptop. The name of the error
789 error. The L2TP connection attempt failed because the security layer encountered a processing error during initial negotiations with the remote computer.
In this regards what I do?????

make sure IKE and AuthIP IPsec Keying Modules" service and the "IPsec Policy Agent" service is up and try to upgrade your network adapter driver
Sent from Cisco Technical Support iPad App

REPAPI-26525: session connection attempt failed ...

I've got following error-code when I'l use the function
STORECONNECTIONOPEN from the replication OLE control:
REPAPI-26525: session attempt failed for SYSTEM (@POLITE)
What's wrong ? Anybody knows this error ? Exists a complete
documentation of all REPAPI-error-codes ?
Christian Blaha
EMail: [email protected]
[email protected]
[email protected]
null

Christian Blaha (guest) wrote:
: I've got following error-code when I'l use the function
: STORECONNECTIONOPEN from the replication OLE control:
: REPAPI-26525: session attempt failed for SYSTEM (@POLITE)
: What's wrong ? Anybody knows this error ? Exists a complete
: documentation of all REPAPI-error-codes ?
: Christian Blaha
: EMail: [email protected]
: [email protected]
: [email protected]
The message above says the following
REPAPI-26525 Session connection attempt failed for name (@name)
Cause: A connection could not be established to the
specified database using the provided connection string.
Action: Check that the user, password, connect string, names
services, network, and any remote site listener process are
properly installed and working.
The description of the messages can you find under the "Oracle
Lite" Program Group (if you have at least OLite 3.5 installed)
and take "Oracle Lite Message Help" entry (HTML)
It seams that you do not specifiy any password within your
StoreConnectionOpen command. Do it, take whatever you want (if
you have again 3.5 installed; 3.6 is checking the password if it
is correct [new feature in 3.6])
regards
Adrian
null

Access Connections fails to launch - "has encountered a problem and needs to close..."

I have an R61 with XP, SP3 installed. The underlying functionality of Access Connections appears to be working properly (I have access to both Ethernet and wireless using profiles previously established), but when I attempt to launch Access Connections (from system tray icon, Programs, etc.) I get the error message, "Access Connections has encountered a problem and needs to close. We are sorry for the inconvenience," and the option to send or not send an error report to Microsoft. This makes it impossible to create or edit location profiles. I first encountered this error several months ago with AC version 5.33 (might have also seen it under 5.3). Subsequently I have upgraded to version 5.50 and have the same problem. Today I uninstalled AC, restared, reinstalled ver 5.5 (from a fresh download), and restarted. I still encountering the problem.
Additional information: Norton Internet Security (2010) is installed. Microsoft and ThinkVantage patches are up to date.
Please recommend "next steps" in troubleshooting or a way to resolve this issue.
Thanks

Hmmm... could be a corrupt profile.
Try this.
1. Uninstall Access Connections (but don't delete the profiles)
2. After the reboot, open REGEDIT.
3. In the left pane, expand HKEY_LOCAL_MACHINE, then SOFTWARE, then Lenovo
4. Still in the left pane, right click on Access Connection and choose export
5. Assign an appropriate filename and click Save (I suggest somewhere on the Desktop).
6. Right click on Access Connections again and choose delete.
7. Open Windows Explorer and go to C:\Program Files\Thinkpad\ConnectUtilities directory.
8. Delete any files in this directory.
9. Reinstall Access Connections v5.50
10. Try and create a profile.
If you still get an error trying to create a profile, then something else is broken. Be sure you have .NET 3.5 SP1 (it may be under optional downloads in Windows Update).
If it works fine, then you have a bad profile. Unfortunately, there isn;t an easy way to figure out which one other than try and error of delete profiles and trying one at a time.
To restore your profiles.
1. Unistall Access Connections. Reboot.
2. Double click the saved .reg file on your Desktop and answer Yes to merge it into the registry.
3. Install Access Connections. Reboot.

Access Connections fails to recognize DNS server for wired Ethernet connections

I'm running Windows 7 on a Thinkpad T410i. I ran the Lenovo update yesterday which updated Access Connections from 6.01 to 6.21. I then could not make any network connections to the Internet. I used Windows System Restore to back out the changes made by the Lenovo updater.
Since then, I am able to connect to the Internet using the wireless adapter, but the wired LAN connection fails to connect to the Internet because it doesn't recognize the DNS servers The wired LAN adapter is the Intel 82577LM Gigabit Network Connection. The IP v4 configuration settings haven't changed (use DHCP, obtain IP and DNS addresses automatically), but it can't seem to connect to the DNS servers.
The message from Windows Network Diagnostics is:
Your computer appears to be correctly configured, but the device or resource (DNS server) is not responding.
The symptoms appear the same as in this problem in the Lenovo support library, but that was occuring with Access Connections 2.60, a much earlier version of the software:
Network connection is not working if Access Connection is used to set DNS information - ThinkPad General
Symptom
When a wired (Ethernet or Token Ring), network profile is created with Access Connections v2.60, the user may be unable to connect to a LAN or the Internet.
Affected configurations
Any model ThinkPad system using Access Connections v2.60
Does anyone have any suggestions? Thanks!
Michael

pariswd wrote:
Hello Lenovo? Are you hearing us?
Welcome to the forum!
Yes, some Lenovo employees do read and post to this forum. Mark is quite active, and several others post as well. In addition, there are lurkers who just read without making public comments although sometimes they ask the mod team to either gather more information or pass along advice.
However, here are the expectations of their participation from the Welcome message:
These communities have been created to provide a high quality atmosphere in which users of Lenovo products and services may share experiences and expertise. While members from Lenovo may participate at intervals to engage in the discussions and offer advice and suggestions, this forum is not designed as a dedicated and staffed support channel.
The bottom line is there's no guarantee that you will get an answer to a question here directly from Lenovo.
On the other hand, you just might! ;-)
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Jane
2015 X1 Carbon, ThinkPad Slate, T410s, X301, X200 Tablet, T60p, HP TouchPad, iPad Air 2, iPhone 5S, IdeaTab A2107A, Yoga Tablet, Yoga 3 Pro
I am not a Lenovo Employee.
I AM one of those crazy ThinkPad zealots!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

Access Connections and WLAN

Access Connections attempts to connect to my secured home network but fails. Yet I can still connect to the network, connect to Skype, and access webpages through Chrome. Windows Network and Sharing Center tells me that I am connected to the internet through my home network yet Access Connections has a big red X over the wireless connection, telling me I cannot connect to the network.

You can just un-install it. I did on a recent Thinkpad,
and my connections were fine afterwards.
Or explore the settings of the utility, maybe there is
something you can change to fine tune it?

Thin Client connection not failing over

I'm using the following thin client connection and the sessions do not failover. Test with SQLPLUS and the sessions do fail over. One difference I see between the two different connections is the thin connection has NONE for the failover_method and failover_type but the SQLPLUS connection show BASIC for failover_method and SELECT for failover_type.
Is there any issues with the thin client the version is 10.2.0.3
jdbc:oracle:thin:@(description=(address_list=(load_balance=YES)(address=(protocol=tcp)(host=crpu306-vip.wm.com)(port=1521))(address=(protocol=tcp)(host=crpu307-vip.wm.com)(port=1521)))(connect_data=(service_name=ocsqat02)(failover_mode=(type=select)(method=basic)(DELAY=5)(RETRIES=180))))

You have to use (FAILOVER=on) as well on jdbc url.
http://download.oracle.com/docs/cd/B19306_01/network.102/b14212/advcfg.htm#sthref1292
Example: TAF with Connect-Time Failover and Client Load Balancing
Implement TAF with connect-time failover and client load balancing for multiple addresses. In the following example, Oracle Net connects randomly to one of the protocol addresses on sales1-server or sales2-server. If the instance fails after the connection, the TAF application fails over to the other node's listener, reserving any SELECT statements in progress.sales.us.acme.com=
(DESCRIPTION=
*(LOAD_BALANCE=on)*
*(FAILOVER=on)*
(ADDRESS=
(PROTOCOL=tcp)
(HOST=sales1-server)
(PORT=1521))
(ADDRESS=
(PROTOCOL=tcp)
(HOST=sales2-server)
(PORT=1521))
(CONNECT_DATA=
(SERVICE_NAME=sales.us.acme.com)
*(FAILOVER_MODE=*
*(TYPE=select)*
*(METHOD=basic))))*
Example: TAF Retrying a Connection
TAF also provides the ability to automatically retry connecting if the first connection attempt fails with the RETRIES and DELAY parameters. In the following example, Oracle Net tries to reconnect to the listener on sales1-server. If the failover connection fails, Oracle Net waits 15 seconds before trying to reconnect again. Oracle Net attempts to reconnect up to 20 times.sales.us.acme.com=
(DESCRIPTION=
(ADDRESS=
(PROTOCOL=tcp)
(HOST=sales1-server)
(PORT=1521))
(CONNECT_DATA=
(SERVICE_NAME=sales.us.acme.com)
*(FAILOVER_MODE=*
*(TYPE=select)*
*(METHOD=basic)*
*(RETRIES=20)*
*(DELAY=15))))*

T400 Vista vs Access Connections

(I hope this doesn't show up twice. My first try failed with an undecipherable server error)
Basically, wifi is unusable on my new T400 when running Vista Ultimate or Vista Business 64. If I run XP it works just fine. All 3 are stock Lenovo OEM installs from factory media.
My home wifi router is sitting close to the laptop. W/Vista, I can usually see it via "find" but usually can't connect. Occasionally after rebooting I can. Sometimes I can't even see it in find. W/XP on this T400, or with XP on my T61, it works as expected.
I suspect confiicts between Vista wifi management and Access Connections. With XP, one could solve this by unchecking the "let windows manage..." box in wifi properties. There doesn't seem to be such an option in Vista. I have tried disabling the windows "Zero Configuration" service (WLAN Autoconfig after SP1) but that doesn't help. Without that service, AC can't even turn on the radio. Worse (!) I can't turn the radio on manually via Fx-F5 either. Bluetooth yes, wifi no.
It looks like AC actually uses some/all of the WLAN Autoconfig function.
One thing I haven't tried yet is uninstalling AC and just using the Vista wifi management. Even if that works, it gives up a lot in terms of profile management.
I welcome any suggestions. As it stands, this shiny new T400 is unusable. It's a nice little machine, but this isn't the first of the frustrations....
Thanks,
Z
Message Edited by zoltanthegypsy on 10-24-2008 03:38 PM
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Unfortunately, I need to use this thing on the road as well as at home, so a fixed IP address isn't an option since I won't know what subnet(s) will be in use. I experienced the same problems last weekend at two hotels and in the Denver airport, so it isn't my router.
I have done quite a bit more experimentation with this problem, without any resolution. I do notice that when it fails Vista thinks it is connected, but only locally. It has assigned a 169... address which I take to mean that DHCP has failed. Trying a command: ipconfig /renew fails with an error.
If I let it fail, then reboot, it usually will succeed as long as I try to connect to the same access point that failed before the reboot.
I tried uninstalling Access Connections, but Vista has the same problem(s) when it is doing the management! Failed connections, local only connections, and often success after a reboot. One interesting and nasty difference is that when using the Windows management w/out Access Connections, wired connections will also fail in the same way!
I see many, many people on the web who are having similar problems. Some of the threads go back more than a year with no resolution.
I have gone around and around with IBM/Lenovo support. They have escalated the problem to a series of lead techs who never return phone calls. Very disappointing, since the first tier techs are quite friendly and helpful - and generally return calls.
My next step is to go back to the nice man who handles escalations from the sales side, and ask him where to send this piece of junk. It boggles my mind that Microsoft and Lenovo will put this kind of half-baked crap in the marketplace, and then do nothing to get it working.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Vista SP2 and Access connections requiring manual reconnect

Hi,
I'm experiencing a problem after the installation of Windows Vista SP2 on my Vista Business. After a reboot, I must always manually 1) disconnect the WLAN connection and then 2) reconnect to establish a working WLAN connection and to gain access to Internet. Before I disconnect, the WLAN connection is alive, but I cannot access any websites. Everything worked just fine before installation of SP2.
I'm running Access connections version 4.42 on Thinkpad R61. I've read that someone has had a similar problem with wired LAN and with newer version of Access connections: http://social.technet.microsoft.com/Forums/en/itprovistasp/thread/17ba267e-0bb1-4621-b81f-04afa0d806...
Does someone know how to solve this issue and make the connection to work without a manual disconnect -> reconnect step?
BR,
Miika

After some searching, I found a working solution:
http://www.darthcontinent.com/2009/05/no-internet-after-installing-vista.html
Everything works fine now.

Access Connection 4.52 is available for Vista and XP

A new release of Access Connection is available, dated April 4, 2008
Vista version here
XP version here
CHANGES IN THIS RELEASE
Version 4.50, 4.51 and 4.52
[Important updates]
Nothing.
[New functions or enhancements]
- Integration with AVAYA IP Softphone.
- Profile Aging feature.
- Ethernet Speed and Duplex setting.
- Wireless WAN PAP/CHAP authentication setting.
- Automatic reconnect VPN setting.
- "Override TCP/IP and DNS defaults" and "Do not automatically include
wireless profiles without security in the roaming list" options in
Client Configuration Policy settings.
- "Disable Ethernet adapter when Ethernet cable is unplugged" option
in Global Settings.
- Roaming speed improvement.
[Problem fixes]
- Profile can not be imported on the Japanese, Korean, simplified
Chinese and traditional Chinese edition of Operating Systems.
- "Operational" is still shown after launching WANLite.
- The following message is not displayed while GPS is searching
satellites.
"A wireless WAN client utility is managing the WAN connection."
- Wireless USB may not be detected.
- An application error occurs after bad credentials with PEAP-MSCHAP
for IBM/ThinkPad/Lenovo Wireless adapters.
- Avaya softphone is launched even if the start option is disabled.
- Audio tuning has to be done every time profile is applied.
- Location switching priority is not maintained after deployment.
- SSO profile does not connect after deployment.
- AT&T Wireless WAN international roaming requires to connect with
AT&T Communication Manager first before using Access Connections.
- Switching from wireless to Ethernet takes 90sec.
- Ethernet save port prompts 2 times for same profile.
- Access Connections crashes when 'No' is selected at PAC prompt.
- Location switching greyed out after SMA migration.
- EAP-FAST connection failure.
- Switching from Static to DHCP does not work on Spanish Windows.
- Wireless static IP profile does not connect on Windows 2000.
- Connection log does not show any data while connected Wireless WAN
by Dialup.
- Wireless WAN dialup connection fails on Windows 2000.
- Connection fails to 11a mode AP when roaming from 11g mode.
- CCX profile can connect even when wrong root certificate is selected.
- Adapter name is not shown in profile view if upgrade from Access
Connections 3.x.
- Wrong German translation of error message.
- Wireless WAN connection fails after hibernation/wakeup with Telus2.
Cheers,
Bill
I don't work for Lenovo

After Update via System Update, Thinvantage Access Connection failt to load with reference to a missing call in a DLL (very long string). Deinstalled Access Connections now and will reinstall manually...
dsp
After reinstall it still fails to load:
ACTray.exe - Unable To Locate Component
This Application has failed to start because ACGUIHlpr.dll was not found. Re-installing the application may fix this problem.
dsp
Message Edited by dsp on 04-09-2008 02:57 PM

Access Connection 5.2 QCTray /exit or /killac will make gui crash in vista os.

Access Connection ver5.20 Build 7XCV14WW
Encounter Crash reported by Vista Os: with the following message
ThinkVantage Access Connections Main GUI Applications has stopped working.
Windows can check online for a solution to the problem .
-> Check online for a solution and close the program
-> Close the program
Step to Reproduce:
1. Open Command Prompt with Administrator right.
2. Type : QCTray /exit or QCTray /killac
3. a message will popup and show the above message .
PS: Previous version does not encounter this issue. I found on after i updated to latest version 5.20.
Bug ?

Hello K2low99, welcome to Lenovo forums!
Please post your model number, not S/N, and used OS 32/64bit + SP.
So it will be easier to help you.
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

Thinkvantage Access Connection for Windows Vista 64

My T61 HD has a crash. Need to reinstall everything. Tried to install ThinkVantage Access Connection but it does not work on Windows Vista x64. Is this right?

Hi,
for the correct flow of Access Connection you should install following apps/driver is following order:
- Power Management driver:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-4GXPEG
- Power Manager
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70601
- Hotkey driver
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-68000
- System interface driver
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67228
- Wifi driver
- Access Connections
Please let me know, if that helps.
Rgrds

Access Connection 5.02 stalled my Vista SP1 when its connection attempt fails

Similar Messages

Maybe you are looking for