Access connection loses WWAN settings when rebooting

After upgrade to version 5.31, Access connection loses my wwan location profile when rebooting. It will revert to a profile named Mobile broadband. I can then edit this profile, but it will be lost when robotting next time.
I am using the Erricson wwan modem.
Any ideas ?
/MF

Hi,
try to make following:
- delete all WWAN profiles in AC profile list
- delete the WWAN driver
* reboot
- install the WWAN driver back
* reboot
-create the WWAN profile, that you need and reboot again, so that you just verify, that the profile is saved.
Btw: in the past I had this same issue and you would not believe, but it was caused by the fact, that I have used old version of Power Management dirver and Power Manager.
By my previous issue was the fix following:
- delete AC
- delete WWAN
- install:
1) Power Maangement driver
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-4GXPEG
2) Lenovo System interface driver
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67228
3) Hotkey driver
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-68000
4) Power Manager
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70601
5) Wifi driver (optional, because I have used the old version of this driver)
6) WWAN driver
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70000
7) Access Connection
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67283
The installation order was the root cause in my case.
I would advice to use the latest versions from the Lenovo.com site, as if you are using one app with new and one with old version, then it might cause trouble.
Let me know, if that made any change.
Rgrds

Similar Messages

Access Connections: proxy + homepage settings not taken over in Firefox and IE since upgrade to 5.0

Hi,
I got a really annoying problem since upgrading to AC 5.0: both in IE 6.0 and FF 3.0 the proxy and homepage settings are not taken over when switching the network profiles. A first attempt based on a statement found here
http://www.thinkpad-forum.de/thinkpad-software/thinkvantage-software/13963-access-connection-absturz...
seemed to look succesful. (for non Germans: they have solved a crash-problem while creating new profiles in reducing the size of FF's prefs.js file to a value under 45 kB). I had a similar problem, too, and solved it in this way. Also the proxy issue seemed to look better then but but only for some days. Now its the same again, proxy and homepage (did by the way never work with AC 5.0) do still not have any effect on IE and FF.
What's the reason? Has anyone solved or at least experienced this problem?
Thanks a lot for any hints...
Best regards,
Carsten
PS: T41p, Win XP Pro SP2, IE 6.0, FF 3.0.1

BSNF:
Stopped working on 5.0. Upgraded to 5.02 through System Update, continued to not work. Have deleted all profiles, recreated: Still doesn't work. Have uninstalled Access Connections, reinstalled: Still doesn't work. Doublechecked settings in profiles, verified that check box is on in order to get Access Connections to do its thing.
Both IE 6.0.2900.5512.xpsp.080413-211 (that is, the system proxy and home page settings) and Firefox 3.0.1 are affected.
Turned on log file; there were 152 lines of error message, included below, some of which clearly make reference to Firefox. Don't know what's wrong. Some kind of permission thing?
<tr><td></td><td>ERROR SvcGuiHlpr( kab(Prvlg).4576.0340) [9/14]14:26:40:960 GetPrefsFile got prefs file path [C:\Documents and Settings\kab\Application Data\Mozilla\firefox\Profiles\vbpsq9vz.Work\prefs.js]</td></tr>
<tr><td></td><td>ERROR SvcGuiHlpr( kab(Prvlg).5356.3964) [9/14]14:27:06:897 GetPrefsFile got prefs file path [C:\Documents and Settings\kab\Application Data\Mozilla\firefox\Profiles\vbpsq9vz.Work\prefs.js]</td></tr>
I've got a much bigger file that contains the log when switching back and forth. There's other error messages in there, too: Missing PID, etc. Any ideas?
Ken Becker

L530 - Access Connections: proxy + homepage settings

The problem is on a brend new L530, installed from scratch with Win7 Enterprise 64bit, no Lenovo Solution Center, just Lenovo System Update (5.02.0018) and Lenovo Access Connection (6.01).
The steps I did:
Ethernet cable plugged in
Started system
After a while AC asked for the new profile name, flagged the "Modify profile" checkbox
Modified settings
Applied profile...nothing happened on the Control Panel (Internet Options) so IE is useless.
Looks like Firefox settings changed (Manual profile and all the settings are there).
I wish AC would set "Control Panel -> Internet options" so every modern browser would work (Chrome and Firefox both have "System Settings" for the Proxy settings).
Keep in mind that If I reboot the system (maybe forcing AC to re-read profiles) looks like everything works fine.
So the real problem looks related to profiles created after AC loaded.
Any hint?
Moderator edit: Please DO NOT post in 4+ year old threads!
Solved!
Go to Solution.

Maybe this could be useful for someone as I think I found where the problem is: pay attention at the "No Proxy" setting!
I did some tests and it looks like AC doesn't handle "Firefox" syntax for this setting (i.e. 10.0.0.0/8), if you put that on the profile the proxy setting will not be set.
The other problem is that Firefox will not understand IE setting (10.*).
Right now I set up profiles just with "IE syntax" and wrote on BugZilla:
https://bugzilla.mozilla.org/show_bug.cgi?id=260883

Access Connections issues w L512

I have a Lenovo L512 - 444CTO, running Windows 7, i5 processor, 4gb ram, 500gb hd
it has the adapter 11b/g/n wireless LAN mini-PCI express Adapter II
both at my home and at my office, both of which have wireless internet, it will log on initially and get good signal and work, but within ~10 minutes of being on the internet, it for no reason stops working. The Access Connections menu says that it is still connected with strong signal. But the small "network" icon in the bottom right shows the yellow-triangle exclamation point, and says "no internet access," despite the fact that all other computers at both the home and office continue to work without interruption.
it is not a problem with the networks, as multiple other computers on the same network in both places work without interruption.
this laptop was purchased because i have online live synchronous classes this spring for my Graduate program, and I need to be able to get online and stay online to participate in them.
Any ideas as to why this might be happening or possible solutions would be greatly appreciated.
there is no firewall on either of the wireless providers that I use, and i have checked that the wireless radio is turned on. the troubleshooting for the network icon tells me it finds nothing it can do.
Solved!
Go to Solution.

Hello mate,
It's possible that you need to deselect the option "Allow the wireless LAN radio to be turned off when inactive" found under Global settings.
Launch Access Connections>Tools>Global Settings. Deselect it and see if that fixes your problem.
Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

Mac OS 8.6 Auto network connect to a server after reboot is not working

We have multiple old blue and white systems on a network. All but one will automatically connect to the network when rebooted. I have gone into Chooser, Appletalk, put in the server IP address, put in the server password, checked the boxes that say remember Server name and password for next startup. I can connect at that time with no problem. When I reboot, the server does not automatically hook up. I have to go back into Chooser, etc. I created an alias on the desktop, but it still prompts me for a password to connect. I have performed a clean install of the Mac OS 8.6. It still does not connect to the server after reboot (after configuring all the settings again after the clean install). Please help..

Hi,
Thank you for posting in Windows Server Forum.
Can you please create the database manually with below command and verify.
PS C:\> Set-RDConnectionBrokerHighAvailability –DatabaseConnectionString
"DRIVER=SQL Server Native Client 11.0;SERVER=<SQL Server
Name>;Trusted_Connection=Yes;APP=Remote Desktop Services Connection Broker;
DATABASE=<DB Name>" -DatabaseFilePath "C:\DbFiles\<DbName>.mdf"
-ClientAccessName "<DNS RR Name>"
Grant DBO permissions to the service account on the RDS server and try to run your wizard again.
More information.
RD Connection Broker High Availability in Windows Server 2012
http://blogs.msdn.com/b/rds/archive/2012/06/27/rd-connection-broker-high-availability-in-windows-server-2012.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

Access Connections / WLAN / Win7 x64 / 5300 AGN / connection loss

Hi there,
I'm experiencing some Problems with Access Connections. Most of the time I'm using my T500 with a dockin station and a wired network. No problems so far. But when i undock it and start using WLAN its only a matter of time until it looses Connection. Something about 5mins. Access Connections states its connected and the signal strength is perfect, but the small Network manager Icon from Windows says its not. And in fact, i can't ping the access point or my gateway. ipconfig shows the correct ip configuration, but there is no connection any more (access connection still claims to have a perfect connection).
When I disconnect via Access Connections and try to reconnect it fails. Not completely but obtaining a new IP from the DHCP-Server fails. So my Nic is configureg with 169.x..x.x (aka crap)
Restarting AcPrfMgrSvc and AcSvc did the trick for about 5min, then I had the same problem again.
Looks like Access Connections and Windows aren't "best friends".
The 5min problem seems to be caused by some power saving function, but I don't want to disable them.
Win7 x64 is a fresh installation ( btw. to get all the needed drivers is a nightmare!)
Anybody knows this problem? Any fix from lenovo?
Would be nice!
Kind regards

Yes basically you have to disallow Windows to turn off the device automatically.
Because Access Connection doesn't replace Network and sharing center but works in addition with it, there is some settings have to be modified in windows.
If not allowing windows to turn off the device is not enough to solve your problem, you can gon in access connections>tools>global settings and untick allow the wireless LAN radio to be turned off when inactive.
With your comparision with an hybrid car, if your not allowed to switch to save fuel and you can't fix it you have to choices don't use it or use fuel.
Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

How can I disable remote access connection window ?

When I try to connect (via TCP/IP) with a VI in another PC (in my local network) it appears the remote access connection window.
How can I disable this (programmatically if possible) ?
A big thanks for your answers.
Linus

Randy,
attached the image of the Remote Access Connection Window that appears when I connect to the VI.
It is the Operating System (Windows) classical panel for Remote Access connections using a modem.
Many thanks.
Linus
Attachments:
Remote_Access.jpg ‏22 KB

Can't import profiles in Access Connections 5.02

I exported location profiles in Access Connections 5.02. When I exported, it prompted me for a password, which I entered. However, when I tried to re-import the profiles, it did NOT prompt me for a password and failed with an error saying "Unable to import file. Incorrect passphrase or corrupted file." Well, how can I enter a passphrase when it doesn't prompt me for one on import?!!
This is on a Thinkpad T61p.

Hi bravedave,
should your update say something meaningfull, or just a sticky note?
BTW: for the above situation, you will be prompted for the passphrase, once you open AC GUI and import this .loc file manually.
BTW2: I would more advice to use the LOA export file, as this is more extended and you can do more, then just import and export AC profies. However, for this second option you need to download the Admin pack for AC.
Cheers

My phone will not give my access to mail account settings

My phone will not give my access to mail account settings when I open mail contacts and calendars the accounts are all there but not bold. And nothing happens when you touch them?

Go to general -> settings -> restrictions, then turn off it..

TS3638 i have an internet connection but when i open app store it shows error message "cannot connect to app store".when i try to sign in with my valid apple ID and password it says "connection failed".i tried keychain access settings but it did not help.

i have an internet connection but when i open app store it shows error message "cannot connect to app store".when i try to sign in with my valid apple ID and password it says "connection failed".i tried keychain access settings but it did not help.please help me!!

Open Sysem Preferences from your Apple () menu top left in your screen then select the Firewall tab.
Make sure the Firewall is turned off.

My wifi network connection is not working, will read "unable to join". Am able to access as a guest. When I hit the blue arrow on the right hand side of my network there is no information e.g ip address, subnet mask, etc. This info is in my guest area.

My network has not been working today. When I click on it it says "unable to access nhe network". My guest network will work. When I hit the blue arrow on the right hand side of my network there is no information in the IP address, subnet mask, router, etc. There is information in my guest section when I checked. I have unplugged and replugged my router and turned my Wifi button of and off, started and restarted my Ipod as per internet suggestions. Would anyone know how to get my network reactivated. I am nervous to hit reset network settings in case I lose all my music and icons, etc. added since I got my Ipod. Thank you for any assistance

Do other devices now connect?
Did the iPod connect before?
What encryption/security is the router using?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Both my iphone 4s and my ipad3 will not connect to the server when trying to access my email account. Why, and how do I fix it.

Since 29/10/2012 my iphone 4s and more recently my ipad 3 will not connect to the server when trying to access my email account. All I get is an error message saying that 'cannot get mail, connection to the server failed' I hadnt changed any settings it just happened. I have since done a complete re-boot on the ipad but to no avail. Anybody got any suggestions?

No. Everything was working fine and then it wasn't. I hadn't changed any settings or switched either one off. When the phone stopped working properly I ignored it because I always have my ipad with me but that just sopped working properly and now I am stuffed. I have tried most solutions suggested on here even wiping the ipad clean and re-booting. I did this exactly the same way as when I first got it but still no joy. The same with the phone.

I get a connection timed out error when trying to connect to the itunes store, if I have pending downloads they show up and I can download, also I was able to access my account, yet I can't access other parts of the store, I am in greece on a macbook pro

I am from the states and am in Greece on vacation. I have a good wifi connection yet keep getting a connection timed out error when I try to access the itunes store. It is funny because pending downloads show up in the cue, and they download no problem. I can also open my account. When I try to go the the movies or music section of the stor though it just times out. I tried updating to the latest itunes software and restarting, also I checked all the proxy boxes in the network section of the settings then unchecked them all and restarted and it keeps doing the same thing. Any help would be appreciated.
Thanks

Welcome to AD!
There's been plenty of posts about Norton & the removal tool here. Unfortunately many folks seem to not even know it comes pre-installed on most PCs! Even a trial version, never used or long since expired can cause problems - and not just with iTunes.
Anyone with a Dell, HP, Gateway EEE PC, Asus ..... what Windows PC manufacturer does NOT have this junk software pre-installed?
Almost all of them have made deals with Symantec to pre-install it.
Horrible, horrible software.
Anyway, glad you finally solved your problem.

Losing history, cookies, settings, and plug-ins when rebooting

I am having a problem with Firefox that is driving me NUTS! Every time I have a need to reboot my computer, I lose my settings, cookies, history, and add-ons. My bookmarks are still there however. After rebooting and clicking FF, it changes my settings to the default, and I get the two welcome tabs like I’ve just installed for the first time. The two tabs it opens are the “Welcome to Firefox” tab and the “Mozilla Firefox start page”. Anyway, every time this happens, I lose my settings, cookies, history, and my add-ons. I always have to exit, and use Mozbackup to restore my add-ons from an earlier time. When I restore my add-ons and restart Firefox, it doesn’t show my add-ons. I always have to edit my savings like I had them, and exit. When I reload FF, the add-ons will be there, but all the tabs from the add-ons load in Firefox like I just installed them for the first time instead of restoring them like they were. All the add-on settings are the default ones, and I have to change all the add-on settings by hand too. Also all the websites I typically go to that should stay signed in aren’t, and I have to sign in on all my web pages and tell it to remember me again. I’m getting tired of having to do all of this every time I need to reboot Windows.
I have tried everything I could think of, or suggested in the previous help topics. I even tried uninstalling Firefox, reinstalling it, then restoring my bookmarks and add-ons and it still did it! I don’t know what else to try. Here’s my system info:
Windows Vista
ZoneAlarm Extreme Security Version 9.1.008.000
Spybot - Search & Destroy 1.6.2.0 (system settings protector 1.6.6.32)
Ad-Aware 8.1.4
Firefox 3.6.3

I simular problems with Firefox 4.0 bookmarks. When I bookmark a website the next time I boot my computer the bookmark I saved is not there. Just as if I never bookmarked the web page. This happens all the time.

Out of the blue, my ITouch is unable to access my wireless network ONLY when my PC has been turned on (PC is connected via Ethernet cable, and has no wireless capability as far as I know). What gives? It works fine when the PC is off.

Out of the blue, my ITouch is unable to access my wireless network ONLY when my PC is on (the PC is connected via Ethernet cable, and has no wireless capabilities that I know of). What gives? When the PC is turned off, everything is totally fine. I\m stumped.

Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
I suspect a problem with your router. Try changing the security. First use no security as a test.
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Access connection loses WWAN settings when rebooting

Similar Messages

Maybe you are looking for