Access Connections 5.20 VERY VERY SLOW, produces errors...

I just installed the latest version of Access Connections, 5.20, on my T400, and whenever I open it to do ANYTHING, it pegs the processor and responds extremely slowly (I'm talking 5 to 10 seconds to respond to a mouse click).
Also, after I installed it, I got the message: "The system contains incompatible wireless wan drivers"
What the heck is Lenovo doing out there? A bright shiny new version of Access Connections, and it makes my laptop even less usable than before!
Anyone having this problem?
- Tim

Yes, please wait with updating AC cause the needed driver aren´t online till now.
Reverting back to AC 5.12 should reactivate WWAN function.
Message Edited by Agotthelf on 26-02-2009 09:35 AM
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

Similar Messages

ThinkVantage Access Connections, Power Manager, and Toolbox all crash on startup

I have a SL 500 with factory Vista , updated to SP2 and the current versions of the thinkvantage components.
Access Connections has always been very buggy of this machine (I guess the battery monitor has been as well), When I attempted to update them this is where I ended up.
Also just installed new .net framework 4 as well.
thanks for any help
ian
Description:
  Stopped working
Problem signature:
  Problem Event Name: CLR20r3
  Problem Signature 01: pcdrcui.exe
  Problem Signature 02: 6.0.5514.59
  Problem Signature 03: 4c0eb0cb
  Problem Signature 04: wpfview
  Problem Signature 05: 6.0.5514.59
  Problem Signature 06: 4c0eb0cb
  Problem Signature 07: f8
  Problem Signature 08: 9c
  Problem Signature 09: System.IO.FileNotFoundException
  OS Version: 6.0.6002.2.2.0.256.6
  Locale ID: 1033
Description:  Stopped working
Problem signature:  Problem Event Name: CLR20r3  Problem Signature 01: pcdrcui.exe  Problem Signature 02: 6.0.5514.59  Problem Signature 03: 4c0eb0cb  Problem Signature 04: wpfview  Problem Signature 05: 6.0.5514.59  Problem Signature 06: 4c0eb0cb  Problem Signature 07: f8  Problem Signature 08: 9c  Problem Signature 09: System.IO.FileNotFoundException  OS Version: 6.0.6002.2.2.0.256.6  Locale ID: 1033
Description:
  Stopped working
Problem signature:
  Problem Event Name: APPCRASH
  Application Name: PWMUI.EXE
  Application Version: 1.0.0.0
  Application Timestamp: 4bea35c2
  Fault Module Name: KERNEL32.dll
  Fault Module Version: 6.0.6002.18005
  Fault Module Timestamp: 49e037dd
  Exception Code: e0434f4d
  Exception Offset: 0003fbae
  OS Version: 6.0.6002.2.2.0.256.6
  Locale ID: 1033
Description:
  Stopped working
Problem signature:
  Problem Event Name: APPCRASH
  Application Name: Access Connections.exe
  Application Version: 5.3.0.0
  Application Timestamp: 4bcff8d0
  Fault Module Name: KERNEL32.dll
  Fault Module Version: 6.0.6002.18005
  Fault Module Timestamp: 49e037dd
  Exception Code: e0434f4d
  Exception Offset: 0003fbae
  OS Version: 6.0.6002.2.2.0.256.6
  Locale ID: 1033

Hi...
I too have got the same problem...
i dont know when it started as it was running fine....earlier..
In Access Connections the 'right click' menu on the taskbar runs just fine ..but the Access Connections program crashes on opening..
The wireless status also runs fine
Same is the case with Power Manager
Shows the right battery status and the right click menu runs fine..but the Power Manager application crashes
Like by the Lenovo toolbox too crashes
I am using Lenovo X100e with win 7 starter edition
i had .net framework 2 installed ...3.5 doesnt install and.net framework 4 installed after the problems started ...but still the problem hasnt stopped

Access Connections Failure to roam/switch

I am running a T43-2668-84M.
Recently I ordered a complete set of original recovery CD set from IBM and re-built the entire system.
I also ensured that I had been to the Lenovo support site, downloaded all the latest updates as well as the "latest" Access Connections software (which I noticed has changed considerably from the old IBM Connections software).
Anyhow, whereas before I would be able to hybernate my T43 at the office, drive home, power up the T43 and it would automatically find my home wi-fi and connect, this is no longer the case.
It seems that "Access Connections" is not capable of auto-switching ie roaming. I have checked all settings including the obvious "enable automatic location switching".
Has anybody experienced this and found any answers ?
Appreciate your comments. Many thanks in advance.

I have a post on this forum for the exact thing. I thinkt it may be the newest version of access connections. It's very frustrating that I have to manually select where I am.
Thinkpad T400 6474-R2U
Windows 7 Ultimate x64

Access Connections deployment error

Hi,
I try to deploy Access Connections through our school.
I followed the Lenovo guideline called "Access Connections Deployment Guide".
So, I created a file.loa and put it at the same place of the setup.exe of Access Connections.
During the installation process, un error message comes up:
"RunDLL
There was a problem starting C:\Program
The specified module could not be found."
My environnment is Windows 7 Enterprise x64.
Do you know what's the problem?
Thanks for your help,
Solved!
Go to Solution.

The problem was that the files:
___.sig
*.loa
were missing in the: C:\Program Files\ThinkPad\ConnectUtilities\LOA folder on the clients.
So resolved it by adding in my batch file some new command lines.
Thanks,

Very very slow file access iSCSI NSS on SLES11/XEN/OES11

Hi,
Like many Novell customers while carrying out a hardware refresh we are moving off traditional Netware 6.5 to OES11 and at the same time virtualising our environment.
We have new Dell Poweredge 620 serves attached by 10gig iSCSI to Equalogic SAN
Installed SLES will all patches and updates and XEN and then created OES11 SP2 virtual machines, these connect to NSS volume by iSCSI
Migrated files from traditional netware server to new hardware and stated testing and ran into very very slow files access times
A 3.5mb pdf file takes close to 10 minutes to open from local PC with Novell Client installed, same if no client and open via cifs. Opening same file off traditional NW6.5 server takes 3-4 seconds.
We have had a case open with Novell for almost 2 months but they are unable to resolve.
To test other options we installed VMWare ESXi on the internal usb flash drive and booted off that, created same OES11 VM and connected to NSS on SAN and same pdf open in seconds.
The current stack of SLES11/XEN/OES11 is not able to be put into production
Any ideas where the bottleneck might be? We think is in XEN.
Thanks

Originally Posted by idgandrewg
Waiting for support to tell me what the implications are of this finding and best way to fix
Hi,
As also mentioned in the SUSE forums, there is the option of using the Equallogic Hit Kit. One of the tools, next to the great autoconfigure options it has, is the eqltune tool.
Some of the stuff that I've found important:
-gro is known read performance killer. Switch if off on the iSCSI interfaces.
- if possible (meaning you have decent hardware), disable flowcontrol as this generally offers stability but at the cost of performance. If your hardware is decent, this form of traffic control should not be needed.
-To have multipath work correctly over iSCSI and starting SLES 11 SP1. Make sure kernel routing and arp handling are set correctly (not directly relevant if you only have 1 10 GB link):
net.ipv4.conf.[iSCSI interfaceX name].arp_ignore = 1
net.ipv4.conf.[iSCSI interfaceX name].arp_announce = 2
net.ipv4.conf.[iSCSI interfaceX name].rp_filter = 2
Test if traffic is actively routed over both iSCSI interfaces:
ping -I [iSCSI interfaceX name] [iSCSI Group IP EQL]
-Make sure network buffers etc are adequately set as recommended by Dell (set in /etc/sysctl.conf):
#NetEyes Increase network buffer sizes for iSCSI
net.core.rmem_max = 16777216
net.core.wmem_max = 16777216
net.ipv4.tcp_rmem = 8192 87380 16777216
net.ipv4.tcp_wmem = 4096 65536 16777216
net.core.wmem_default = 262144
net.core.rmem_default = 262144
-Settings for the /etc/iscsi/iscsid.conf I'm using:
node.startup = automatic # <--- review and set according to environment
node.session.timeo.replacement_timeout = 60
node.conn[0].timeo.login_timeout = 15
node.conn[0].timeo.logout_timeout = 15
node.conn[0].timeo.noop_out_interval = 5
node.conn[0].timeo.noop_out_timeout = 5
node.session.err_timeo.abort_timeout = 15
node.session.err_timeo.lu_reset_timeout = 20 #Default is 30
node.session.err_timeo.tgt_reset_timeout=20 #Default is 30
node.session.initial_login_retry_max = 12 # Default is 4
node.session.cmds_max = 1024 #< --- Default is 128
node.session.queue_depth = 128 #< --- Default is 32
node.session.iscsi.InitialR2T = No
node.session.iscsi.ImmediateData = Yes
node.session.iscsi.FirstBurstLength = 262144
node.session.iscsi.MaxBurstLength = 16776192
node.conn[0].iscsi.MaxRecvDataSegmentLength = 131072 #A lower value improves latency at the cost of higher IO throughput
discovery.sendtargets.iscsi.MaxRecvDataSegmentLeng th = 32768
node.session.iscsi.FastAbort = No # < --- default is Yes
-Have Jumbo frames configured on the iSCSI interfaces & iSCSI switch.
If you are using multipathd instead of the dm-switch provided with the Equallogic Hit kit, make sure the /etc/multipath.conf holds the optimal settings for the Equallogic arrays.
Ever since Xen with SLES 11 SP1 we have been seeing strong performing virtual servers. We still use 1GB connections (two 1GB connections for each server, serving upto 180~190Mb/s).
There could be a difference with the 10GB setup, where multipath is not really needed or used (depending on the scale of your setup). One important thing is that the iSCSI switches are doing their thing correctly. But seeing you've already found better results tuning network parameters on the Xen host, seems to indicate that's ok.
Cheers,
Willem

I own a 13-inch MacBook Pro and for the past day, my wifi on my laptop says I only have two bars of connection and is running very slow,but all of my other devices such as my iPhone and iPad are connecting perfectly to the wifi. How can I fix this? Thanks

I own a 13-inch MacBook Pro and for the past day, my wifi on my laptop says I only have two bars of connection and is running very slow,but all of my other devices such as my iPhone and iPad are connecting perfectly to the wifi. How can I fix this? I have tried to shut my laptop off and let it rest and I have also re-started my wifi router three different times. Someone please help me with this problem so I can begin to use my laptop again as I take it to school and use it for class.
Thanks so much!

FCP, and all software on OSX, has a few different "preference" files (the extension is .plist), which store all your user settings. Each time you resize a window, change a setting, anything, this file is re-written. Kinda easy to see how they would become corrupt every now and then.
-Close FCP
-Navigate to User>Library>Preferences and delete com.apple.FinalCutPro.plist
-Navigate to User>Library>Preferences>Final Cut Pro User Data and delete Final Cut Pro 5.0 Prefs
-Empty your trash
Relaunch FCP and see if that worked.
Download FCP Rescue to make this process easier in the future. When you have FCP running really smooth, open FCP Rescue and create a backup of your preference files. If it starts acting wanky, just run FCP Rescue and Restore your backup preferences. Works really slick, and it's free.
EDIT: Or use the really simple explaination that X posted as I was typing.

TS1398 since i have updated the latest software i am facing problem using wifi which is very very slow most of the time or wont connect at all was that update supposed to be for better or worse

is apple product going down hill it seems their updates are creating a lot of problem now the wifi connection is really ******* me off it doesnt connect or even if it does its very very slow i used to love using iphone but i think its time to move on to something else they have taken everyone for granted

Welcome to Apple Discussions, Mark.
I've never come across your first problem on any of the Apple notebooks I currently own (or have owned in the past). Then again, perhaps I'm not looking close enough.
Have you compared it with any other 12" PowerBook? If not, perhaps you might be able to try that at a local store with units on display.
Otherwise you might want to give AppleCare a call. Alternatively, if you have an Apple Store or Apple Authorised Service Provider near you (I don't know where you are located) then you can take it in to be checked.
As for your second problem (uneven illumination), that has been known to afflict other notebooks. My own 15" PB has had its screen replaced on two occasions because of this. Depending on the severity, you might be able to get it replaced. Mine became so bad that the screen was effectively unusable.
To be honest, here in the UK, I would actually try for a replacement PowerBook - if the problems were severe enough and also because your PB is still very new. However the consumer laws in your country (wherever that may be) might be very different to mine.

ACE 20 | When connection to one serverfarm/VIP cross 1000 all other serverfarms and VIP of that context are facing very very slowness

Dear Community
Hi !!
We are Facng a typical issue and scraching Head since sometime Now and Now seek help and sugesstions
I have a ACE with 10 Context. Now There is a Particular Context which have 6 server farms and all have under different VIP.
Have raised Multiple TAC cases and Captured Millions of Packets but no reason. The ACE resource and CPU Usage is Normal and no increase noticed.
Issues Happening is that when connection to one serverfarm cross 1000, all other serverfarms and VIP of that context are facing very very slowness ,and they have no relation with each other both Physically and Fictionally
If any of you have heard of similar issue can you refer me a solution if the issue is with ACE

Hi Shirshendu,
Replied to you on other thread.
Regards,
Kanwal

HT201415 Cellular network connection very very slow.

My ipad3 is very very slow connecting using Vodafone network.
What's wrong and what are the VPN settings supposed to be?

Derrrick5942 wrote:
My ipad3 is very very slow connecting using Vodafone network.
Contact Vodafone and ask them why it is slow.

W/ this latest version, getting MANY "the connection was reset" pages, plus VERY VERY VERY slow loading. I'm running Windows 7 on a new Dell. What is up w/ that?

w/ this latest version, getting MANY "the connection was reset" pages, plus VERY VERY VERY slow loading. I'm running Windows 7 on a new Dell. What is up w/ that?
I don't know how else to phrase that. I'm a pretty good user, but after defragging, backing up, and getting rid of a bunch of files that "may" slow down performance of firefox, the fact is, "the connection was reset" comes up five or six times a day--AND the browser is going slow as molasses. I haven't had this much trouble since before I got my new dell.

hello whatagem123, it is never a good idea to stick with outdated versions of firefox just for the sake of addons, as this will put the integrity of your system and your the personal data on it at risk - there are various [https://www.mozilla.org/security/known-vulnerabilities/firefox.html known security vulnerabilities (some of them highly critical)] that were fixed in later versions!
so please [[Update Firefox to the latest version]] & [https://www.mozilla.org/en-US/plugincheck/ update your plugins] (your java plugin has security vulnerabilities that are actively and widely exploited on the web).
afterwards i'd recommend resetting firefox - this will keep your bookmarks and passwords but will get rid of most other customizations. this might well fix both the issues you've described in your question...
[[Reset Firefox – easily fix most problems]]

Very very slow internet connection (modem: westell 327w)

hey guys, it's been 2 weeks already and my internet speed is very very slow. i checked my speed at speedtest.net and the speed is like 76kbps. i called customer service many times already but they couldnt fix the the problem, they said they're going to send a technition in about2-3 days but as you see it's been 2 weeks. of course i restarted my modem already but the speed slows down like right after a minute. i live in new york and there's no major rain on the day my internet connection slows down. i'm really tired of calling the customer service...so please help guys. thank you

If you are not useing wireless, and have no intention of useing it, I would log into the modem and turn it off. Someone else could be connecting to you router and useing your bandwidth. But not likely that is you problem.
If you are useing wireless then you should log into your modem/router and be sure you have security enabled so nobody can get into you connection.
If Verizon promised someone would come out and fix the issue, they should have given you a service order number for the repair. I would contact them and have them review you account and ask what gives? It is possible that there is a line problem and they should be able to determine that from the central office. Call tech support and insist that the problem be solved. If it requires a technician visit, ask for the order number and date when the repair will be made. Get the repair order number and insist that it be completed.
Message Edited by prisaz on 04-05-2009 11:03 AM

Tutorial project runs very very slow.

Hello,
I have just started to work with OAFramework and I am trying to execute the tutorial project. After configurating all my enviroment I am able to run properly this project with "Run > Run test_fwktutorial.jsp" but the problem is that it runs very very slow. It takes at least 5 minutes to load the "Hello World!" and the same time to load the other pages.
We work with Patch Jdeveloper 5455514 and our system is Oracle Applications 11.5.10 RUP4.
We are connected to our system via a VPN client. Could it be the reason for this poor performance or are there other things I shoud have to modify?
Thanks in advanced,
Xavier

Hi Xavier,
There can be multiple reasons why the Jdeveloper is very slow. VPN might be one of them. Try accessing the Oracle Applications using the VPN connectivity and observe the speed. Try to do some transaction and notice whether database is slow or not. You can also double click the jpx file and check for the db connectivity by clicking on 'Test Connection' and see how much time it takes. The other reasons why the Jdeveloper is slow might be because you have multiple projects opened. You can also try to close the Jdeveloper session and restart again by deleting the myclasses and systems folder.
See whether one of these approaches help.
Thanks

T500 running very very slow on specific WIFI network only???

Hi,
This problem is driving me absolutely crazy. It means that I can only use my PC at home if I use a cable connection to the router....
Problem is that on my home network my T500 is having a very very slow access to the internet via wireless. On all other wifi network I have connected to there is no issue and speed is high.
Also several colleagues have been here with their T500 and none of them experience any issues with speed. We all run on the same t500 model, ordered at the same time and with same setup. We use Windows XP.
I have tried to update all drivers, I have called my network provider who have updated router software, changed frequency and all other things they could do to avoid interference etc.
I have two other PC's at home - none of them have any issues.
I have done a web seacrh and could see that I am far from alone with this strange issue of a T500 being slow on only a specific network (often a home network). Many different routers are involved, so I dont think it is arouter problem (would also mean that my colleagues identical t500s would have issues right??).
Have there been any reolution to this T500 problem??
Best regards and with hope of "salvation" :-)
Christian

Which model of wireless card are you using? Intel 5100 or 5300 or thinkpad version?
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Since the latest version was downloaded to my pc, the games i play on facebook are VERY VERY SLOW, how do i speed it up?

since the latest version of firefox was downloaded to my pc, ALL the games I like to play on FaceBook are VERY VERY slow.
it didnt do this before the download. how can i fix this so it is like it was before?

You can try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
You need to close and restart Firefox after toggling this setting.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration
It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to install for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test.
*http://www.bleepingcomputer.com/tutorials/how-to-start-windows-in-safe-mode/

Exchange 2013 CU5 , Exchange Power Shell very very very slow reasponse when using get command.

Exchange 2013 CU5 , Exchange Power Shell very very very slow reasponse when using get command.
First my organize has Exchange on 2 site like
site A (internet facing) : 2CAS 2 MB all are Services pack1
site B (DR Site , no user active on this site) : 2CAS 2MB all are Services pack 1
so today I upgrade Exchange 2013 from SP1 to CU5 start on "site B" and I found this issue and the details is....
When I open EMS on any CU5 for query something (like get-mailboxdatabasecopystatus) the response return very slow and some query will not return at all (like get-owavirtualdirectory).
But If I using EMS on SP1. Everything is ok then I try to use EMS on SP1 connect to CU5 and try to query something. the result is
some query command cannot return for any result that are server on siteB (just some query command)
Problem
EMS on CU5 return very slow result.
EMS on SP1 still ok.
Does anyone face this problem before for CU5??? Please help me figure this out. Thank you
reply from Social.technet

Hi,
Have you used the above cmdlets to check your Exchange server health?
"all other command that I ran on EMS didn't logged on event viewer.", my environment is the same with you. I use Exchange 2013, only errors will be displayed in MSExchange Management. Actually, it is not related to slow EMS response.
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support

Access Connections 5.20 VERY VERY SLOW, produces errors...

Similar Messages

Maybe you are looking for