Access connections 5.85 cannot run on this profile

Hello to lenovo forum.
I had installed on my lenovo 3000 n500 so far all new access connections packages with no problem till version 5.72.
From version 5.83 and now already 5.85 i get on start up an error saying ac cannot run on this platform.
However i can connect to internet smoothly and i can access ac user interface from start-programs menu since tray icon also misses from desktop.
My notebook is
Lenovo N500 (4233-4AG) 32 bit
Operating System:Windows Vista Service Pack 2
Now here starts my analysis of queries.
1. from http://support.lenovo.com/en_US/downloads/detail.page?&LegacyDocID=MIGR-67283
we can see that supported systems are among others Lenovo N100, N200 ,and this is common for versions 5.83-5.85 and earlier ones.
so my n500 is supported from both versions 5.85 and 5.72,since ac drivers for n series work on 100 200 and 500 series.
2.So i guess it's a matter of prerequisites.
Now let's compare Software and Device Driver requirements Before installing ThinkVantage Access Connections
a.for version 5.85 that's latest which misfunctions for me when installed
http://support.lenovo.com/en_US/downloads/detail.page?&LegacyDocID=MIGR-67283
with b. version's 5.72 prerequisites which is the last smoothly working on my N500 model.
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/85cv28ww.txt
From comparison of the prerequisites for [For the other ThinkPad models] we can see that version 5.85 does not have any higher versions prerequisites than 5.72.
So what is the problem?
3.My wifi lan adapter is model Intel Wireless WiFi Link 5100 AGN version 13..4.0 installed a year ago with no problems working with access connections 5.72 and covering prerequisites for driver version Intel Wireless LAN (11abgn, abg, bg) for Windows Vista version 12.4.0.21. as mentioned on lenovo site.so no real problem with this.
4.But let's insist a liitle more on prerequisites.Maybe i really need
a.ThinkPad Power Management driver for Windows Vista/XP/2000/ME/98 SE, version 1.42 or later.
b.Hotkey Features Integration for Windows 7/Vista/XP/2000 version 3.02.0000 or higher.
Here we can see.
a.from http://support.lenovo.com/en_US/downloads/detail.page?&LegacyDocID=MIGR-4GXPEG
that lenovo 3000 N series is not [vista] supported .
So my N500 model needs Power driver not from this url but from lenovo's support - download drivers and software selecting my configuration files i find Power Manager for Windows Vista - Lenovo G530 (MT 4446 only), N500 version
0.64.0.9 which is already installed and the latest one for my n500 model.
So no particular version exists apart from what i have already .since it works with 5.72 it should work with 5.85
lenovo has not updated any PM driver version for N500 model and i can find it as final on support site for my model
b.now my guess refines to a driver update for hotkey features.
but access connections points to http://support.lenovo.com/en_US/downloads/detail.page?&LegacyDocID=MIGR-74261
where lenovo N series is not supported.
So with little search i found http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGr-68000
which seems to be the proper for n series and the right ones.
5.Now the real questions
1.on
http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGr-68000
are these the right drivers for my n500 model on screen display?
2. if yes latest version is 2.23.0000 http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/6jvu34ww.txt
and read me file says that onscreen display version is 5.32
I have on my laptop version 5.13 of on screen display installed,may this be the upgrade to 5.32 needed to work access connections 5.85 on my n500 model right?
also i have presentation director version 4.a on my laptop and at http://support.lenovo.com/en_US/downloads/detail.page?&LegacyDocID=MIGR-74261 asks for hotkey features to work
"For Windows Vista/XP only) It is required to install Presentation Director version 4.04 or higher." and url redirecting there
should i have also this to upgrade?
3.from main access connections dowload page redirection to "Hotkey Features Integration for Windows 7/Vista/XP/2000 version 3.02.0000 or higher" that's http://support.lenovo.com/en_US/downloads/detail.page?&LegacyDocID=MIGR-74261
we see that package 3.02 which is needed has onscreen display driver version 6.02
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/6wvu50ww.txt
will version 5.32 for my n500 model when installed cover this demand for driver version?i see that system interface driver minimum demand is version 1.01 which is already installed so no real problem with this driver.

I think its because the Lenovo 3000 & Valueline Systems are going to the idea-brand so the support for thinkvantage software is ending for those systems , so you might want to go back to the version that was working
Thinkpad R61 7733-1GU
Thinkpad X61T 7762-54U
Thinkpad X60T 6363-4GU
Did a member help you today? Thank them with a Kudo!
If a post answers your question, please mark it as an "Accepted Solution"!
Regards,
GMAC

Similar Messages

Z68A-GD80 (B3): "virtu cannot run on this iGPU"

I have the following system specs:
Motherboard: MSI Z68A-GD80 (B3), bios 17.5/20120111
CPU: i7-2600K
Win 7 x64
Intel iGPU drivers 15.26.8.64.2696 (latest version for win 7 64)
2 MSI nvidia GPU cards (1 580 and 1 570) in SLI
I run folding at home on the graphic cards of this system most of the time when not running graphics intensive programs, and the hit on the system is not so bad most of the time, but after nearly a year of it, I decided to try running the IGPU, so that the system could use that for web browsing, videos etc, while the folding processes could churn away on the discrete GPUs.
I enabled i mode in the bios, and loaded an old set of virtu drivers I had downloaded when I first got the MB (1.2.102). The Virtu control panel loaded without error. The panel has an update check feature, which I used and then downloaded the most recent version, 1.2.114. When the system rebooted after the installation, virtu would not run, instead displaying the message "Virtu cannot run on this integrated graphics processor. Disabling Virtu, and exiting. (Remember to enable Virtu after the problem is fixed.)"
What's the problem that I need to fix? What really puzzles me is that 1.2.102 worked, but 1.2.114 wouldn't.
Thanks
Mark

Have you retested with 1.2.102 and does that still work ?
If it does, then I would report the anomaly with the latest driver to Lucidlogix. I don't quite know how to interpret the expanded release notes of Virtu, but one of the known issues with the latest version states:
Quote
Known issues in this driver version
The following are the open issues with current driver release:
General
 Antivirus and firewall may popup a message box – the user should approve ‘Virtu Control panel’ access the net
 Control panel may flicker when switching between Tabs
i-Mode (display connected to integrated GPU output)
 3DMark Vantage may crash with FRAPS
 Virtu control panel may show some artifacts when system’s desktop background is configured to Windows Classic theme.
 When Dual GPU optimization (SLI/Crossfire) is enabled, performance may stay unaffected.
The very last known issue may be the problem

Anyone else have the issue where, after the 8,3 upgrade, you cannot access more than 1 exchange account on your iPhone? This is annoying to me as I need to access 4 daily and cannot due to this error.

Anyone else have the issue where, after the 8,3 upgrade, you cannot access more than 1 exchange account on your iPhone? This is annoying to me as I need to access 4 daily and cannot due to this error.
The first one, my private home email, works fine. With the other 3, I get the message "Cannot get mail: The connection to the server failed"
All were working fine before the 8.3 upgrade. I did try the old trick of making one minor change on the account and resaving, but that did not change anything. I even deleted my work account and re-entered it from scratch, but again, sadly, no luck. For the time being, I am successfully getting the email via IMAP, but this ***** compared to exchange. Anyone have any idea what is happening or if a fix is in the works?

Well, the one set up on exchange 2k3 is now working fine, although no changes were made on either the iPhone or the exchange side, so that's fun, but it still is throwing errors when connecting to the other 2 exchange accounts. The common elements are that both non-functioning exchange accounts are google apps for business accounts. So is one of the ones that's working, by the way. The settings on both accounts are the same as the one that's working, and both worked fine before the 8.3 upgrade. I have no issue accessing both of these accounts on my ipad which is currently on 8.2.x. If it's not the iphone OS at fault, I'm at a loss as to what it could be.

Access Connections refuses to run - X200 XP

Either something changed (an update?) or something I inadvertently did that has caused Access Connections to no longer run. The wireless connection is working fine and all of the Fn - x buttons work fine and I am not aware of any other issues with my X200. I just performrd a system update and the Access Connections driver was one of two recommended updates which I performed so presumably I have the latest version. Whether I start it via start menu, thinkvantage button, or from the wireless radio panel, the hard drive light flashes like something is being loaded but after a few seconds the flashing stops but no program starts nor is there any error message.
Hopefully someone here could shed some light on what might have happened and how to resolve it....any help will be much appreciated.
*Smith & Wesson...the original point and click interface*

xwray wrote:
Either something changed (an update?) or something I inadvertently did that has caused Access Connections to no longer run. The wireless connection is working fine and all of the Fn - x buttons work fine and I am not aware of any other issues with my X200. I just performrd a system update and the Access Connections driver was one of two recommended updates which I performed so presumably I have the latest version. Whether I start it via start menu, thinkvantage button, or from the wireless radio panel, the hard drive light flashes like something is being loaded but after a few seconds the flashing stops but no program starts nor is there any error message.
Hopefully someone here could shed some light on what might have happened and how to resolve it....any help will be much appreciated.
Download ThinkVantage Access Connections
Remove any and all versions of access connections-sometimes it will install on top of the previous version- (make sure to delete the application folder as well). Reboot and reinstall using the download from the link posted above (confirm it is the latest release). Access connections can be a little temperamental at times, usually the above steps will resolve the issue.
Currently own: X220T, X201, X200, T61 X2, X61T X3

W500 Access Connections Missing Resource DLL Win XP Pro SP3

Hi, today is 4/21/2010.
I upgraded access connections and get this message on boot up now:
Box title: ThinkVantage Access Connections
Resource dll is missing, Reinstall the application to avoid this problem.
I have upgraded hotkeys, power management driver, access connections and intel proset wireless to the latest versions with particular care taken to follow all of the install instructions.
I cannot get this pop-up box to go away. Also, when i ask the icon in the lower right corner of the screen to "Launch Access Connections" so I can re-import my profiles.. it doesn't ever launch a window, although i can see with process explorer that an executeable called "Access Connections.exe" was launched by "ACTray.exe"
I have done a side-by-side search of a T61P and my W500 and find all of the same "resource" dlls in the same locations.
Please help. Also, if Lenovo tech support happens to read this, please put a check in all of the software upgrade packages to make sure that all the prerequisites are properly installed first. that would probably solve a lot of your problems.
Thanks
Ted

Hi,
I have seen such messages and mostly one of the following was the root cause:
- There is a virus on your system, that prohibited the full installation and registration of Access Connection
- The Access Connection could not be installed properly
The re might be also couple other options, why this might happen, but till now I faced only these situations.
Tell me, after, or priro to the error message, do you see any .dll files described, to which is can be realted?
If yes, then find those file on you HDD and make sure, that they are also present in "%windir%\system32".
Let me know, what exact version of AC are you running now?
Cheers

ThinkVantage Access Connections and Limited User Account (LUA) on XP SP3

Is it really so that one has to be logged on with at least Power User privileges to get the Access Connections utility working properly with 3G/HSDPA? When logging on as a Limited User, the computer can find all the cell phone operators nearby but does not let to do a connect. But when logged on as a Power User, all problems go away.
I would not like to bump up my user privileges from Limited User to Power User, since all else seems to work fine with a Limited User Account. Any ideas about what is going wrong -- or did I just hit into a wall here?
The environment in question is Thinkpad X200 and XP SP3. Access Connections and the HSDPA driver are the latest ones I could find from the Lenovo driver download site (Access Connections v. 5.21, Ericsson HSDPA driver v. 1.0.1046.221).
Would there be any other way to use 3G connections than to use the Access Connections utility (without changing to another o/s)?
--sami

Hi Sami,
I just got stuck on the same problem as you and following is what I found in details fro ThinkVantage Access Connections version 5.30. Hope this helps.
Jakub
<Limited User>
A Limited user can create and apply only modem profiles. However, if
Administrator sets "Allow Windows users without administrator
privileges to create and apply location profiles" option in the
Global settings then the user can create and apply any kinds of
profiles in the system.
Also, a limited user cannot:
1. Edit setting for the Automatic Ethernet and Wireless location
profiles switching.
2. Edit Global settings.
3. Edit profiles created by another user in the system.
4. Renew or release IP in the Diagnostics panel.
5. Export profiles.
The limitations on Power user also apply on Limited user.

Access Connections does not accept Windows Wireless Config

Hi All,
We are rolling out RADIUS/802.1x wireless lan in our enterprise. The wireless settings are deplyed via AD grouo policy - no problems there.
I have an issue when i configure my access connections (ver 5.21) on my T61 machine. I configure AC to use Windows wireless security settings whcih are picked up correctly. The issues occur when i switch from this profile to another profile for exampls and vice versa. AC seems to think that i need to configure my wlan security settings each time i switch to that profile and wont connect. I get an error message:
The SSID 'WM2009' selected for this profile must be configured in windows. Click OK to configure the wireless settings in Windows'.
I know that the wireless settings are fine, as i can connect with the window wireless client fine - its just AC that has the issue.
Any ideas appreciated!

Domain policy wireless profiles are not compatible with Access Connections.
The problem stems that Domain profiles are stored in a different part of the registry than a locally created WZC profile. Since these are part of the domain policy, they cannot be altered locally. Microsoft wouldn't provide Lenovothe encryption used (for obvious security reasons), so the domain policy based profiles can't be manipulated by Access Connections.
But we do provide an ADM template that can be used to do much the same things.
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=ACON-DEPLOY

802.1x wlan authentication wont work with Access Connections

Hi - hope someone can help. I have a WLAN configured to use 802.1x authentication using PEAP, passwords and an internal CA.
I can conect and authenticate a wireless client using the inbuilt windows wireless client; i am unable to connect when i configure Access Connections on the same computer with the same wireless settings. This is really annoying.....
The version of access connections is 5.21 running on windows XP SP3. Laptop is T61.
The connection fails as Access connections seems to think that there is no certificate installed on the client; there is and of course this would not have worked with the windows wireless client.
error message is:
The identity of the server was rejected. Verify that the correct server name has been specified in the 'Validate Server Certificate' section of the profile.
Any suggestions appreciated.
Thanks.

did you find any resolution to this? our mba- mid 2013 deployment is having a very similar problem. We've gone through loads of troubleshooting and have yet to come to a resolution. all our mid 2012 mba's are working fine they're 10.7.5/10.8.4 mixed. console logs don't show much, i'll try the wireless diags tomorrow. our other 10.8.4 build appears fine on other models of machines. i've read posts about deleteing the adapters, deleting the system config plists and changing the mtu size, these steps do not work for us.
we don't have as high a failure rate with our deployment, but 25%-30% of our clients randomly drop connectivity and are unable to reconnect (fluttering wi-fi wave). when you slect the wifi symbol in the menu bar other wireless networks do not show, the 'looking for networks' fly wheel continues to spin. ocasionaly on login the yellow jelly bean will appear then disappear before finally timeing out without logging the user in (depsite having mobile accounts enabled). mostly the problem manifests itself when waking from sleep - the wifi symbol flutters endlessly without connecting. deleting the 8021x profile and readding it will reenable connectivity. we've tried new profiels, but to the same end. i know our certs and systems are fine because previous mac os x builds work fine as do our windows clients.
any input would be much appreciated.

Unable to edit or delete profile in Access Connection 5

Hi Everybody!
I'm unable to edit or delete profiles in Access Connection on my T41 running latest Access Connection v5.
The edit and delete buttons on the Access Connection Profile menu are shown only in light grey color and it's not possible to click them. I have administrator rights on my machine. These profiles were initially migrated from a very old v3 (automatically during system update) and I guess that this is one of the root causes of my problem.
I have also tried to use the QCTRAY.EXE /DEL command, but that's also not working. The profiles just remain there unchanged.
I would be very pleased if somebody could give me a hint on how to overcome this boring problem.
Best regards,
Helmut
Solved!
Go to Solution.

v3 profiles are not compatible with v5.
The best solution in your case would be to uninstall Access Connections with profiles and then reinstall and create new profiles.

Access Connections 5 and up issues

Hi,
For years our organization has been using Access Connections 4.52 flawlessly. Recently we purchased a boat load of R500 notebooks. At this point, we were forced to upgrade to version 5.20 as 4.52 will not recognize the wireless card.
With 4.52, when a client would boot up wireless and attempt to login to our network , Access Connections would pop up, then attempt the login only AFTER it has connected to the network. With 5.20, 5.33 and 5.50, this function seems to work ok until I sysprep the image.
After I sysprep our image, this is what happens: User boots up wireless and attempts to login to our network....gets and error stating "OURDOMAIN is not available"....15 seconds later Access Connections wakes up and connects to the wireless network. Now, here is the really dumb part. I can resolve the issue on my image by opening Access Connections > Location Profiles > Select Profile > Edit > OK. Access Connections will now behave properly, until I sysprep.
Is there any solution out there for this? Or even better, is there a way I can make 4.52 work on a newer model. 4.52 did not have this issue.
Thanks
Rosy

Hi,
I cannot see it being fair, to blaim Access Connection for situation, that is clearly not caused by Access Connection.
In the past I was working with multiple corporate images, which I of course had to create, which included syspreping the image. And I can tell you, that sysprepping a 100% working image is always, and I really mean ALLWAYS screwing up some part of the image. If you have been doing images for longer time, then surelly you will be agreed with me.
If you are not, then you have not created enough images manually (I mean starting with the times of RIS, going through WDS, IUB, SCCM .... ).
So much for understanding, where to look when you are looking for the root cause.
So Access Connection is a tool, that depends on other applications and driver. Almost the same as by all other TVT applicaitons. For Access Connection it's highly important, that it's installed in following order together with other tools/drivers:
1) Power Managerment driver
2) Power Manager
3) System Interface driver
4) Hotkey utility/driver
5) LAN Driver
6) WLAN driver
7) WWAN driver
8) Access Connection
It's highly important, that this order is kept.
So back to the imaging, here is what might happen, when you sysprep the image:
- you sysprep it, where some parts (usually ini files) are remoted from the dirver installed on the machine.
- of course you configure the sysprep to load up all the drivers depending on the HW, or some input from the client
- this will load everything back and inclusiv all the drivers
ISSUE:
- WLAN, driver is installed/inicialized after Access Conenction was present in the image
- by syspreping some of the above menitoned applications from Lenovo are taken as drivers and therefore, they are re-installed only after sysprep kicks-in
I'm pretty sure, that you know, how you install you image and by some points you might not be agreed with what I'm writing, but I was working with the informations, that I could find in your description.
I think more description on the sysprep, or the imaging tool and structure might help me imagine, what is goin on.
BTW: I just remembered, that by olders versions of AC 2.x and 3.x when such issue was present, like also LAN was not detected and all this happened after I installed a corporate image, then my fix for the image was quite simple:
Reinstall all the above drivers + apps in the order as you can see it in here .
Cheers

Text problems on X40 Access Connections and Power Manager

Recently, and possibly in conjunction with a recent Lenovo update, Access Connections and Power Manager (at the least, there may be other programs that have problems too, but I have not checked all) display all text as little boxes. The functionality is still there, but it is kind of hard to figure out what's what. I have PM 1.6.3 (just installed the latest), but not sure of version of Access Manager, as I can't see it.
I can email a screen shot if needed, but could not figure out how to put one in here. Any help would be most appreciated.
Bruce

Hi Sami,
I just got stuck on the same problem as you and following is what I found in details fro ThinkVantage Access Connections version 5.30. Hope this helps.
Jakub
<Limited User>
A Limited user can create and apply only modem profiles. However, if
Administrator sets "Allow Windows users without administrator
privileges to create and apply location profiles" option in the
Global settings then the user can create and apply any kinds of
profiles in the system.
Also, a limited user cannot:
1. Edit setting for the Automatic Ethernet and Wireless location
profiles switching.
2. Edit Global settings.
3. Edit profiles created by another user in the system.
4. Renew or release IP in the Diagnostics panel.
5. Export profiles.
The limitations on Power user also apply on Limited user.

Exporting Access Connections profile / Import to Windows Wireless

Hi All.
I have an issue which i really hope someone have a solution for as either googling and searching through 53 pages on this forum has not provided me with an answer. Here goes...
The hospital on which i'm working are about to change their IT-infrastructure and when this migration takes place i will no longer be able to use Access Connections. I have about 30 profiles in AC and all of them with a security key which would be hell to setup again through windows wireless.
Do any of you know of a way to export profiles from AC and then import them to Windows Wireless?
Thanks in advance!

Domain policy wireless profiles are not compatible with Access Connections.
The problem stems that Domain profiles are stored in a different part of the registry than a locally created WZC profile. Since these are part of the domain policy, they cannot be altered locally. Microsoft wouldn't provide Lenovothe encryption used (for obvious security reasons), so the domain policy based profiles can't be manipulated by Access Connections.
But we do provide an ADM template that can be used to do much the same things.
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=ACON-DEPLOY

Lenovo Access Connections Program Dead

Hi, and thanks in advance for any suggestions.
I'm running Vista Business on a T500. I've always used the Lenovo Access Connections program to switch wifi locations. Access Connections now doesn't appear to work. The program opens normally but there is now (hadn't noticed it before) a location profile named "Windows Wireless Service," and when I click the "Find" button Access Connections doesn't find anything the list and graphic screen show no networks even if there are a dozen WiFi routers.
When I FnF5 the Wireless Radio window opens indicating that my Bluetooth is "on" and the 802.11 is "off." If I click the "Power On" button nothing happens.
But my internet works normally and it's even switching WiFi locations automatically! Somehow the machine has switched to using the Windows WiFi manager - the only thing I can think of that could have precipitated this is that I plugged into my work ethernet. First time in about a year that I've done this and these problems with Access Connection seemed to start shortly after that (no indication at the time - Access Connections seemed to work).
If I go Control Panel > Network & Sharing > Connect to a Network I see a "find" window similar to the Access Connections list, but on this Windows program the routers are all "found." I see in a few places that two network connection managers can't be running at the same time. I tried turning off the service "WLAN AutoConfig" but that did not allow Access Connections to run. Maybe I didn't shut off the right thing or maybe I didn't turn it off correctly. Since Access Connections doesn't work I turned WLAN AutoConfig back on, but it would be nice to have Access Connections functioning. I've looked everywhere and can't find an answer. Any suggestions appreciated!
Ben

I have Access Connections working in Windows 7 and had it working in Vista before that. I use it to change between wireless connections as well.
If you want it working, try the following:
1. Document your profiles (SSID, WEP or WPA, security key) in a small Notepad file.
2. Download the latest copy (5.85 if I remember correctly).
3. Uninstall Access Connections. When it asks, delete the profiles as part of the uninstall.
4. Go to Windows Wireless Manager. Delete any left over profiles in it.
5. Restart.
6. Install Access Connections (use a wired connection first if you can).
7. Now install the first wireless connection and ensure that it works.
8. Assuming so, install the remaining wireless profiles.
Good luck.

Enable auto connection with Access Connections?

I was wondering if anyone could tell me how to make my T61 connect to my mobile broadband internet connection automatically when coming out of sleep and/or hibernate? Can it be done through Access Connections? I'm running the latest AC on Vista 64.

You can set Access Connections to connect to your WAN if none of the other wireless profiles are available.
Open Access Connections and in the upper right, switch from Basic to Advanced.
Go to the Tools tab and click on Location Switching.
The bottom check box can be set "When no other connections are available, connect through WAN or WiMax"
Set that and click Ok.

Access Connections - IP doesn't change when switching locations

In my Access Connections setup, I have a mix of profiles; some using DHCP & some using static IPs.
I am experiencing problem when manually switching between profiles, where the IP address is not always changing as expected.
For example:
(all profiles are wired connections)
Home (DHCP)
IP address: Allocated by DHCP
Subnet mask: Allocated by DHCP
Default gateway: 10.0.0.1
DNS servers: Allocated by DHCP
Office 1 (Static)
IP address: 203.18.x.x
Subnet mask: 255.255.255.240
Default gateway: 203.18.y.y
DNS servers: 10.10.140.7, 10.10.140.12, 203.18.z.z
Office 2 (Static)
IP address: 10.10.140.202
Subnet mask: 255.255.255.0
Default gateway: 10.10.140.1
DNS servers: 10.10.140.7, 10.10.140.12, 203.18.z.z
Office 3 (DHCP)
IP address: Allocated by DHCP
Subnet mask: Allocated by DHCP
Default gateway: <blank>
DNS servers: 10.10.140.7, 10.10.140.12, 203.18.z.z
On many occasions when switching from, say, "Office 2" to "Home"; the static IP address for Office 2 (10.10.140.202) is not being replaced by a new IP allocated from my home router (which, by the way is configured to allocate IPs from the pool 10.0.0.2 to 10.0.0.4; so the old IP address should not be valid on that network).
What is even more interesting is when you take DHCP out of the equation, for example when switching from, say, "Office 2" to "Office 1" (both of which are static IP profiles). The IP address 10.10.140.202 (Office 2) should be replaced by the static IP 203.18.x.x (Office 1) in all cases. However on many occasions it is not, and I'm left with the previous IP allocated.
Has anyone else noticed this behaviour?
I've found that by switching back and forth between profiles, it eventually resolves itself (although sometimes up to 3 or 4 switches is required).

AC 4.42 fail to assign a static IP when the OS is in spanish and the wireless device is Intel. In that case the problem was fixed with a patch that the support guys release.
In your case, I don't know my friend.
Have you tried using only Windows, without AC?
Regards

Access connections 5.85 cannot run on this profile

Similar Messages

Maybe you are looking for