Access contacts without cell service

My iphone4 will not work internationally.  Will I still be able to access my contacts without cell service?

my contacts are in the iCloud, so I will be able to view them even without the cell service.
Thank you.

Similar Messages

  • Does gps work on ipad 3 without cell service or wifi connection?

    does gps work on ipad 3 without cell service or wifi connection?

    Yes it works. Initial position acquisition time may be longer, but works fine. Some applications download maps from the network. Unless your application has built in maps or the maps are cached, you won't be able to access maps or navigation feature. But GPS will work.

  • IMovie cannot access library without location services - Why?

    So this is the error message I get when trying to use iMovie for iPhone - "iMovie cannot access your photos or videos" "To enable access, open the settings app, tap General, then tap Location Services and then set the iMovie switch to 'On'." (pic - http://twitpic.com/2269ze ).The question is "Why?" What if I don't want my videos to include geo location data? Why does iMovie need location services to start a project? It doest make any sense to me. I understand that some of the themes may have features for using location data, but shouldn't that be at the users discretion?

    I find this rather odd as well. I keep location services turned off for the camera so why iMovie would need to access data that isn't there is beyond me. I think it's just poor programing on Apple's part. It would be just as easy to ignore any location data if you have that turned off and you happen to pick a picture or video that has it embedded.

  • Security issues on OS4.1 You can access contacts without knowing the PIN

    I foundd this on a web site today, and was shocked that Apple could miss out such a thing......
    You boys at Apple need to get this fixed ASAP
    http://www.markc.me.uk/MarkC/Blog/Entries/2010/10/25Security_Issue_-_iPhone_4_LockScreen.html

    Any way to get this escalated to the security folks?
    Tipped off by this post:
    http://www.macstories.net/news/iphone-security-hole-lets-you-make-calls-when-the -phone-is-locked/
    My own comments on this flaw:
    http://johndball.blaize.net/2010/10/26/bypass-apple-iphone-lock-screen/
    Message was edited by: john_ball

  • Cell service working on open box Verizon iPad without setting it up

    Bought an open box Verizon iPad 3.  Went through set up but not enter an Id or credit card for cell service.  But cell service is working, and I can't log into the account with any of my ids.  Any thoughts on what's going on?

    Hello,
    I should be more specific.  The iPad does register Cellular Service with multiple dots on the upper left of my main screen.  However, there seems to be an internal "disconnect" because apps like Maps and Safari don't recognize or know there is an active cellular connection.
    When I go to Settings > Cellular Data and slide the "switch" to "ON" the Enable LTE "switch" becomes available and it "switch" it to "ON" also the Data Roaming "switch" becomes available and I slide it to "ON".   Lower on the Cellular Data page are 6 apps in "Use Cellular Data For:"  All but FaceTime are "switched" "ON". 
    Under Safari in the "Use Cellular ...:" is "System Services.  Pressing System Services brings up 15 "Services" beginning with "iTunes Accounts" and ending with "Software Updates".  All 15 have some amount of usage shown.
    Back on the Cellular Data page there is a listing for "SIM PIN".  When I touch the right pointing carat two lines appear.  The lower one labeled "Change PIN" is greyed out.  The upper one labeled SIM PIN has a slide "switch".  When I slide the SIM PIN "switch" to the right to turn it "on" a numeric keypad momentarily appears then, a moment later, the screen changes to the main page.  Double clicking the Home button reveals Settings remains open.
    I have removed the SIM Card several times and cleaned the contacts with a "Q Tip" and Isopropyl alcohol, rubbed the contacts with a Pentel Hi-Polymer eraser and again with Q Tip and Isopropyl alcohol.  I have also inserted and ejected the SIM CARD drawer several times attempting to remove any corrosion from the internal contacts.  Again, some portion of the iPad knows there is an active Cellular signal but apps fail to register the connection.
    Any further thoughts?
    Thanks

  • AnyConnect error " User not authorized for AnyConnect Client access, contact your administrator"

    Hi everyone,
    it's probably just me but I have tried real hard to get a simple AnyConnect setup working in a lab environment on my ASA 5505 at home, without luck. When I connect with the AnyConnect client I get the error message "User not authorized for AnyConnect Client access, contact your administrator". I have searched for this error and tried some of the few solutions out there, but to no avail. I also updated the ASA from 8.4.4(1) to 9.1(1) and ASDM from 6.4(9) to 7.1(1) but still the same problem. The setup of the ASA is straight forward, directly connected to the Internet with a 10.0.1.0 / 24 subnet on the inside and an address pool of 10.0.2.0 / 24 to assign to the VPN clients. Please note that due to ISP restrictions, I'm using port 44455 instead of 443. I had AnyConnect working with the SSL portal, but IKEv2 IPsec is giving me a headache. I have stripped down certificate authentication which I had running before just to eliminate this as a potential cause of the issue. When running debugging, I do not get any error messages - the handshake completes successfully and the local authentication works fine as well.
    Please find the current config and debugging output below. I appreciate any pointers as to what might be wrong here.
    : Saved
    ASA Version 9.1(1)
    hostname ASA
    domain-name ingo.local
    enable password ... encrypted
    xlate per-session deny tcp any4 any4
    xlate per-session deny tcp any4 any6
    xlate per-session deny tcp any6 any4
    xlate per-session deny tcp any6 any6
    xlate per-session deny udp any4 any4 eq domain
    xlate per-session deny udp any4 any6 eq domain
    xlate per-session deny udp any6 any4 eq domain
    xlate per-session deny udp any6 any6 eq domain
    passwd ... encrypted
    names
    name 10.0.1.0 LAN-10-0-1-x
    dns-guard
    ip local pool VPNPool 10.0.2.1-10.0.2.10 mask 255.255.255.0
    interface Ethernet0/0
    switchport access vlan 2
    interface Ethernet0/1
    interface Ethernet0/2
    interface Ethernet0/3
    interface Ethernet0/4
    interface Ethernet0/5
    interface Ethernet0/6
    interface Ethernet0/7
    interface Vlan1
    nameif Internal
    security-level 100
    ip address 10.0.1.254 255.255.255.0
    interface Vlan2
    nameif External
    security-level 0
    ip address dhcp setroute
    regex BlockFacebook "facebook.com"
    banner login This is a monitored system. Unauthorized access is prohibited.
    boot system disk0:/asa911-k8.bin
    ftp mode passive
    clock timezone PST -8
    clock summer-time PDT recurring
    dns domain-lookup Internal
    dns domain-lookup External
    dns server-group DefaultDNS
    name-server 10.0.1.11
    name-server 75.153.176.1
    name-server 75.153.176.9
    domain-name ingo.local
    object network obj_any
    subnet 0.0.0.0 0.0.0.0
    object network LAN-10-0-1-x
    subnet 10.0.1.0 255.255.255.0
    object network Company-IP1
    host xxx.xxx.xxx.xxx
    object network Company-IP2
    host xxx.xxx.xxx.xxx
    object network HYPER-V-DUAL-IP
    range 10.0.1.1 10.0.1.2
    object network LAN-10-0-1-X
    access-list 100 extended permit tcp any4 object HYPER-V-DUAL-IP eq 3389 inactive
    access-list 100 extended permit tcp object Company-IP1 object HYPER-V-DUAL-IP eq 3389
    access-list 100 extended permit tcp object Company-IP2 object HYPER-V-DUAL-IP eq 3389 
    tcp-map Normalizer
      check-retransmission
      checksum-verification
    no pager
    logging enable
    logging timestamp
    logging list Threats message 106023
    logging list Threats message 106100
    logging list Threats message 106015
    logging list Threats message 106021
    logging list Threats message 401004
    logging buffered errors
    logging trap Threats
    logging asdm debugging
    logging device-id hostname
    logging host Internal 10.0.1.11 format emblem
    logging ftp-bufferwrap
    logging ftp-server 10.0.1.11 / asa *****
    logging permit-hostdown
    mtu Internal 1500
    mtu External 1500
    ip verify reverse-path interface Internal
    ip verify reverse-path interface External
    icmp unreachable rate-limit 1 burst-size 1
    icmp deny any echo External
    asdm image disk0:/asdm-711.bin
    no asdm history enable
    arp timeout 14400
    no arp permit-nonconnected
    object network obj_any
    nat (Internal,External) dynamic interface
    object network LAN-10-0-1-x
    nat (Internal,External) dynamic interface
    object network HYPER-V-DUAL-IP
    nat (Internal,External) static interface service tcp 3389 3389
    access-group 100 in interface External
    timeout xlate 3:00:00
    timeout pat-xlate 0:00:30
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    timeout floating-conn 0:00:00
    dynamic-access-policy-record DfltAccessPolicy
    aaa-server radius protocol radius
    aaa-server radius (Internal) host 10.0.1.11
    key *****
    radius-common-pw *****
    user-identity default-domain LOCAL
    aaa authentication ssh console radius LOCAL
    http server enable
    http LAN-10-0-1-x 255.255.255.0 Internal
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart
    crypto ipsec ikev2 ipsec-proposal DES
    protocol esp encryption des
    protocol esp integrity sha-1 md5
    crypto ipsec ikev2 ipsec-proposal 3DES
    protocol esp encryption 3des
    protocol esp integrity sha-1 md5
    crypto ipsec ikev2 ipsec-proposal AES
    protocol esp encryption aes
    protocol esp integrity sha-1 md5
    crypto ipsec ikev2 ipsec-proposal AES192
    protocol esp encryption aes-192
    protocol esp integrity sha-1 md5
    crypto ipsec ikev2 ipsec-proposal AES256
    protocol esp encryption aes-256
    protocol esp integrity sha-1 md5
    crypto ipsec security-association pmtu-aging infinite
    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES
    crypto map External_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
    crypto map External_map interface External
    crypto ca trustpoint srv01_trustpoint
    enrollment terminal
    crl configure
    crypto ca trustpoint asa_cert_trustpoint
    keypair asa_cert_trustpoint
    crl configure
    crypto ca trustpoint LOCAL-CA-SERVER
    keypair LOCAL-CA-SERVER
    crl configure
    crypto ca trustpool policy
    crypto ca server
    cdp-url http://.../+CSCOCA+/asa_ca.crl:44435
    issuer-name CN=...
    database path disk0:/LOCAL_CA_SERVER/
    smtp from-address ...
    publish-crl External 44436
    crypto ca certificate chain srv01_trustpoint
    certificate <output omitted>
      quit
    crypto ca certificate chain asa_cert_trustpoint
    certificate <output omitted>
      quit
    crypto ca certificate chain LOCAL-CA-SERVER
    certificate <output omitted>
      quit
    crypto ikev2 policy 1
    encryption aes-256
    integrity sha
    group 5 2
    prf sha
    lifetime seconds 86400
    crypto ikev2 policy 10
    encryption aes-192
    integrity sha
    group 5 2
    prf sha
    lifetime seconds 86400
    crypto ikev2 policy 20
    encryption aes
    integrity sha
    group 5 2
    prf sha
    lifetime seconds 86400
    crypto ikev2 policy 30
    encryption 3des
    integrity sha
    group 5 2
    prf sha
    lifetime seconds 86400
    crypto ikev2 policy 40
    encryption des
    integrity sha
    group 5 2
    prf sha
    lifetime seconds 86400
    crypto ikev2 enable External client-services port 44455
    crypto ikev2 remote-access trustpoint asa_cert_trustpoint
    telnet timeout 5
    ssh LAN-10-0-1-x 255.255.255.0 Internal
    ssh xxx.xxx.xxx.xxx 255.255.255.255 External
    ssh xxx.xxx.xxx.xxx 255.255.255.255 External
    ssh timeout 5
    ssh version 2
    console timeout 0
    no vpn-addr-assign aaa
    no ipv6-vpn-addr-assign aaa
    no ipv6-vpn-addr-assign local
    dhcpd dns 75.153.176.9 75.153.176.1
    dhcpd domain ingo.local
    dhcpd option 3 ip 10.0.1.254
    dhcpd address 10.0.1.50-10.0.1.81 Internal
    dhcpd enable Internal
    threat-detection basic-threat
    threat-detection scanning-threat shun except ip-address LAN-10-0-1-x 255.255.255.0
    threat-detection statistics access-list
    threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
    dynamic-filter use-database
    dynamic-filter enable interface Internal
    dynamic-filter enable interface External
    dynamic-filter drop blacklist interface Internal
    dynamic-filter drop blacklist interface External
    ntp server 128.233.3.101 source External
    ntp server 128.233.3.100 source External prefer
    ntp server 204.152.184.72 source External
    ntp server 192.6.38.127 source External
    ssl encryption aes256-sha1 aes128-sha1 3des-sha1
    ssl trust-point asa_cert_trustpoint External
    webvpn
    port 44433
    enable External
    dtls port 44433
    anyconnect image disk0:/anyconnect-win-3.1.02026-k9.pkg 1
    anyconnect profiles profile1 disk0:/profile1.xml
    anyconnect enable
    smart-tunnel list SmartTunnelList1 mstsc mstsc.exe platform windows
    smart-tunnel list SmartTunnelList1 putty putty.exe platform windows
    group-policy DfltGrpPolicy attributes
    vpn-tunnel-protocol ikev1 ikev2 l2tp-ipsec ssl-client ssl-clientless
    webvpn
      anyconnect profiles value profile1 type user
    username write.ingo password ... encrypted
    username ingo password ... encrypted privilege 15
    username tom.tucker password ... encrypted
    class-map TCP
    match port tcp range 1 65535
    class-map type regex match-any BlockFacebook
    match regex BlockFacebook
    class-map type inspect http match-all BlockDomains
    match request header host regex class BlockFacebook
    class-map inspection_default
    match default-inspection-traffic
    policy-map type inspect dns preset_dns_map
    parameters
      message-length maximum client auto
      message-length maximum 1500
      id-randomization
    policy-map TCP
    class TCP
      set connection conn-max 1000 embryonic-conn-max 1000 per-client-max 250 per-client-embryonic-max 250
      set connection timeout dcd
      set connection advanced-options Normalizer
      set connection decrement-ttl
    policy-map type inspect http HTTP
    parameters
      protocol-violation action drop-connection log
    class BlockDomains
    policy-map global_policy
    class inspection_default
      inspect ftp
      inspect h323 h225
      inspect h323 ras
      inspect rsh
      inspect rtsp
      inspect esmtp
      inspect sqlnet
      inspect skinny 
      inspect sunrpc
      inspect xdmcp
      inspect sip 
      inspect netbios
      inspect tftp
      inspect ip-options
      inspect dns preset_dns_map dynamic-filter-snoop
      inspect http HTTP
    service-policy global_policy global
    service-policy TCP interface External
    smtp-server 199.185.220.249
    privilege cmd level 3 mode exec command perfmon
    privilege cmd level 3 mode exec command ping
    privilege cmd level 3 mode exec command who
    privilege cmd level 3 mode exec command logging
    privilege cmd level 3 mode exec command failover
    privilege cmd level 3 mode exec command vpn-sessiondb
    privilege cmd level 3 mode exec command packet-tracer
    privilege show level 5 mode exec command import
    privilege show level 5 mode exec command running-config
    privilege show level 3 mode exec command reload
    privilege show level 3 mode exec command mode
    privilege show level 3 mode exec command firewall
    privilege show level 3 mode exec command asp
    privilege show level 3 mode exec command cpu
    privilege show level 3 mode exec command interface
    privilege show level 3 mode exec command clock
    privilege show level 3 mode exec command dns-hosts
    privilege show level 3 mode exec command access-list
    privilege show level 3 mode exec command logging
    privilege show level 3 mode exec command vlan
    privilege show level 3 mode exec command ip
    privilege show level 3 mode exec command failover
    privilege show level 3 mode exec command asdm
    privilege show level 3 mode exec command arp
    privilege show level 3 mode exec command ipv6
    privilege show level 3 mode exec command route
    privilege show level 3 mode exec command ospf
    privilege show level 3 mode exec command aaa-server
    privilege show level 3 mode exec command aaa
    privilege show level 3 mode exec command eigrp
    privilege show level 3 mode exec command crypto
    privilege show level 3 mode exec command ssh
    privilege show level 3 mode exec command vpn-sessiondb
    privilege show level 3 mode exec command vpnclient
    privilege show level 3 mode exec command vpn
    privilege show level 3 mode exec command dhcpd
    privilege show level 3 mode exec command blocks
    privilege show level 3 mode exec command wccp
    privilege show level 3 mode exec command dynamic-filter
    privilege show level 3 mode exec command webvpn
    privilege show level 3 mode exec command service-policy
    privilege show level 3 mode exec command module
    privilege show level 3 mode exec command uauth
    privilege show level 3 mode exec command compression
    privilege show level 3 mode configure command interface
    privilege show level 3 mode configure command clock
    privilege show level 3 mode configure command access-list
    privilege show level 3 mode configure command logging
    privilege show level 3 mode configure command ip
    privilege show level 3 mode configure command failover
    privilege show level 5 mode configure command asdm
    privilege show level 3 mode configure command arp
    privilege show level 3 mode configure command route
    privilege show level 3 mode configure command aaa-server
    privilege show level 3 mode configure command aaa
    privilege show level 3 mode configure command crypto
    privilege show level 3 mode configure command ssh
    privilege show level 3 mode configure command dhcpd
    privilege show level 5 mode configure command privilege
    privilege clear level 3 mode exec command dns-hosts
    privilege clear level 3 mode exec command logging
    privilege clear level 3 mode exec command arp
    privilege clear level 3 mode exec command aaa-server
    privilege clear level 3 mode exec command crypto
    privilege clear level 3 mode exec command dynamic-filter
    privilege cmd level 3 mode configure command failover
    privilege clear level 3 mode configure command logging
    privilege clear level 3 mode configure command arp
    privilege clear level 3 mode configure command crypto
    privilege clear level 3 mode configure command aaa-server
    prompt hostname context
    no call-home reporting anonymous
    call-home
    profile CiscoTAC-1
      no active
      destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
      destination address email [email protected]
      destination transport-method http
      subscribe-to-alert-group diagnostic
      subscribe-to-alert-group environment
      subscribe-to-alert-group inventory periodic monthly
      subscribe-to-alert-group configuration periodic monthly
      subscribe-to-alert-group telemetry periodic daily
    Cryptochecksum:41a021a28f73c647a2f550ba932bed1a
    : end
    Many thanks,
    Ingo

    Hi Jose,
    here is what I got now:
    ASA(config)# sh run | begin tunnel-group
    tunnel-group DefaultWEBVPNGroup general-attributes
    address-pool VPNPool
    authorization-required
    and DAP debugging still the same:
    ASA(config)# DAP_TRACE: DAP_open: CDC45080
    DAP_TRACE: Username: tom.tucker, aaa.cisco.grouppolicy = DfltGrpPolicy
    DAP_TRACE: Username: tom.tucker, aaa.cisco.username = tom.tucker
    DAP_TRACE: Username: tom.tucker, aaa.cisco.username1 = tom.tucker
    DAP_TRACE: Username: tom.tucker, aaa.cisco.username2 =
    DAP_TRACE: Username: tom.tucker, aaa.cisco.tunnelgroup = DefaultWEBVPNGroup
    DAP_TRACE: Username: tom.tucker, DAP_add_SCEP: scep required = [FALSE]
    DAP_TRACE: Username: tom.tucker, DAP_add_AC:
    endpoint.anyconnect.clientversion="3.1.02026";
    endpoint.anyconnect.platform="win";
    DAP_TRACE: Username: tom.tucker, dap_aggregate_attr: rec_count = 1
    DAP_TRACE: Username: tom.tucker, Selected DAPs: DfltAccessPolicy
    DAP_TRACE: Username: tom.tucker, DAP_close: CDC45080
    Unfortunately, it still doesn't work. Hmmm.. maybe a wipe of the config and starting from scratch can help?
    Thanks,
    Ingo

  • Why can I no longer sync iCal and contacts without iCloud?

    I dont use iCloud basically because by doing so all your data - specifically your contacts and calendar - gets uploaded to an Apple server where it sits for ever. If you decide you want to stop using iCloud (like you decide for some weird reason to use windows instead...or you move somewhere where there's no internet - its possible) it deletes your data from the device you have unsubscribed from. This basically means once you are on iCloud there is no going back. Apple basically acts as if it owns you and your data and inorder to access it (excude me but my calender and contacts list belongs to me) its obligitory to use Apple and iCloud...if you dont it gets deleted and is gone for ever.
    So I sync via USB/WiFi...but now after 'upgrading' to Mavericks this option is no longer permitted? You MUST use iCloud.....WHY?? - I dont want to!
    I run a business and use iCal to make all my business bookings - these used to sync easily between my iPad and my iMac. Now it doesnt unless I hand over the rights to all my data for all enternity to Apple inc.
    This is my stuff and it doesnt belong to Apple - I want to keep it that way
    How can I sync iCal and Contacts without signing away ownership of my diary and contacts to Apple?
    Am I going to have to ditch my Mac?? Why wasnt this more widely publicized??
    Anyone have any suggestions?
    Thanks

    frederick261 wrote:
    Thanks for the reply Arthur. Actually, I just got off the phone with an apple rep telling me you can't downgrade, and that yes, apple actually IS forcing you to use iCloud - if, that is, you actually want to be able to sync your contacts or calendar. Apparently you are special and know something different, so please enlighten the rest of us.
    Here is one way
    https://discussions.apple.com/docs/DOC-6311
    Here is another
    http://www.apple.com/au/osx/server/
    Here is yet another
    If your Mavericks came with anything other than Mavericks pre-installed
    OS X Mavericks: Revert to a previous OS X version
    Also there are a host of other Cloud services you can use. You do not have to use iCloud at all. Although there ARE over 320+ million iCloud presently active, so it is extremely popular with users.
    Pete

  • HT201394 i lost cell service after i install IOS 8 on my iPhone 5s

    i lost cell service after i install IOS 8 on my iPhone 5s
    i update to 8.02, cut still same
    please help

    Hello there, jjthurlow.
    The following Knowledge Base article offers up some great steps for troubleshooting issues with touchscreen response:
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    http://support.apple.com/kb/ts1827
    If your device is experiencing any of the symptoms listed above, try the following steps:
    Restart your device
    Hold the On/Off button until "slide to power off" appears. Slide to power off your device. When it is off, press the On/Off button to turn it back on.
    If you can't restart your device, reset it by pressing and holding the Sleep/Wake button and the Home button at the same time for a least ten seconds, until the Apple logo appears.
    Clean the screen with a soft, slightly damp, lint-free cloth.
    Avoid using the device while wearing gloves, with wet hands, or immediately after applying hand lotion.
    If you have a protective case, or if you are using a plastic sheet or film on the display, try removing them and testing the device without it.
    If the steps above don't resolve your issue, please schedule a service appointment with an Apple Retail Store for evaluation. If an Apple Retail store is not an option, contact Apple to find out your best service option or see the Service FAQ for your product.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • How can I access contacts in PC Suite when my phon...

    My old E50 finally gave up and I bought a 2730 to replace it. My contacts are in PC Suite but I can't access them without connecting the phone first, which I can't as it's faulty. How can I access the contacts that I know are on the PC, without connecting the phone they came off? I don't have sync files.

    You can search in PC Suite's data folder for files named *.db: 
    The PCCSContact.db is SQLite3 database, you can use any SQLite3 reader to open it. There's also a tool: http://sourceforge.net/projects/noknokwhosthere/
    What's the law of the jungle?

  • Where can I buy a NEW iPhone WITHOUT a service plan?

    I have an iTouch now, I'm sell it.
    I want to have external speakers for apps and alarms.
    I do not want iTouch 2nd generation.
    I do not currently need it as a phone, but would like to have it for when I am ready.
    Is it possible to purchase the latest iPhone without any phone plan? When I go through the steps to purchase an iPhone from apple.com it doesn't have a "no plan" option.
    Do other places online / B&M sell iPhones or only apple.com and apple stores? (I do not want a used or refurbished)
    Surely I can still get a hold of an NEW iPhone without a service plan... but where and for how much?

    You can't buy a new iPhone in the US without a plan. Even if you could buy one, it would not work (even as an iPod) until activated with a cell phone provider. You would have to buy a used iPhone that had been activated. Be sure to get a US model (or one for your country if you aren't in the US). Check the part numbers in the right column of
    <http://support.apple.com/kb/HT1937>
    to make sure it is the correct version for your country.
    An officially unlocked one from one of the countries that sell them would also be OK, but any repair would have to be done in its original country. It would have to have been activated in some country, also.

  • Contacts and Calendar Services Broken

    I have a new build of Mountain Lion Server 10.8.2 and am having problems with the Contacts and Calendar services.
    The server is an Open Directory Master.
    I did this build by installing Mountain Lion 10.8 on a new hard drive. I had no interest in migrating any data except for the Open Directory, so I created an Open Directory archive to restore from with the new build. I then removed the old Lion Server boot drive and installed the Mountain Lion Server drive, then installed Server app. I moved the data stores to the RAID before starting any services.
    DNS, DHCP, File Sharing, FTP, Mail, Messages, NetInstall, Profile Manager, Software Update, Time Machine, VPN, Websites and Wiki all work normally. I also use Portable Home Directories. I've only dabbled a bit with Mail, Profile Manager and Wiki, but I have not encountered any problems with them. I use the other services rather heavily. Everything is working great except Contacts and Calendar.
    sudo changeip -checkhostname returns:
    Primary address     = 10.0.0.2
    Current HostName    = myserver.mydomain.private
    DNS HostName        = myserver.mydomain.private
    The names match. There is nothing to change.
    dirserv:success = "success"
    In the Server app both Contacs and Calendars turn on and appear to be working. I have the self-signed certificate created by the sever app assigned to the services. I am unable to log in clients to either Contacts or Calendar service via browser or through iCal or Contacs apps. The apps first notify that a secure connection is not possible. Then when I proceed I get authentication failures, even though the credentials are correct. Removing the certificate from the services has no improvement.
    When I run "sudo serveradmin fullstatus calendar" I get the following output:
    calendar:setStateVersion = 1
    calendar:logPaths:LogFile = "/var/log/caldavd/access.log"
    calendar:logPaths:ErrorLog = "/var/log/caldavd/error.log"
    calendar:state = "RUNNING"
    calendar:servicePortsAreRestricted = "NO"
    calendar:servicePortsRestrictionInfo = _empty_array
    calendar:readWriteSettingsVersion = 1
    Examining /var/log/caldavd/error.log I find this interesting message:
    2012-11-24 22:59:28-0700 [-] Unhandled Error
              Traceback (most recent call last):
                File "/System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python/twi sted/internet/defer.py", line 1187, in unwindGenerator
                  return _inlineCallbacks(None, gen, Deferred())
                File "/System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python/twi sted/internet/defer.py", line 1045, in _inlineCallbacks
                  result = g.send(result)
                File "/Applications/Server.app/Contents/ServerRoot/usr/share/caldavd/lib/python/twis tedcaldav/upgrade.py", line 985, in doUpgrade
                  yield upgradeData(self.config, self.spawner, self.parallel)
                File "/System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python/twi sted/internet/defer.py", line 1187, in unwindGenerator
                  return _inlineCallbacks(None, gen, Deferred())
              --- <exception caught here> ---
                File "/System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python/twi sted/internet/defer.py", line 1045, in _inlineCallbacks
                  result = g.send(result)
                File "/Applications/Server.app/Contents/ServerRoot/usr/share/caldavd/lib/python/twis tedcaldav/upgrade.py", line 771, in upgradeData
                  with open(versionFilePath, "w") as verFile:
              exceptions.IOError: [Errno 2] No such file or directory: '/Volumes/RAID-50/Library/Server/Calendar and Contacts/Data/Documents/.calendarserver_version'
    It seems as though upon setting the data store to the RAID that not all the necessary directories and files were created for the Contacts and Calendar services. Is there a way to create them new? Remember, there is no Contact or Calendar data to save. I am starting with a clean slate.
    Assuming the problem lies with the missing directories in my data store location, is there a way to either create the missing directories & files, or just rebuild the two servieces from scratch?

    Back up all files.
    Quit the Server application and drag it to the Trash, but don't empty. You'll be prompted to confirm that you want to stop all services. You won't lose any server data.
    Put the app back where it was and launch it. Test.

  • I no longer have cell service on my iPhone 4

    1 day after the upgrade to 4.3.3 my cell service no longer works. It doesn't work in my home (wifi does) where service is normally excellent, and it no longer works anywhere. I have tried restarting and resetting it, switching airport mode on and off...which yesterday worked temporarily but not after I lost service again soon after. I contacted my service provider to see it there was a problem with the service....nothing seems to help. My phone seemed to work fine for 1 day after the upgrade but not the next day. I didn't do anything unusual that I normally wouldn't do. Any ideas while I await the tech people of my service provider to contact me?

    Thank you wjosten, I have cell service back now! I backed everything up and went thru the restore process. I got cell service back so thought I would try loading my stuff back to see if it would work. So far, it seems to work tho the 2 texts I received after I restored and before I reloaded my data have disappeared but at least I have service back. I will continue to monitor for abnormalities and consider having it serviced. Thank you so much!!

  • I want to know if the blackberry can still be used without the service

    hi guys,
    I want to know if I can still use the Blackberry on its own without the  Blackberry service such as email, Internet etc? And also can I still use the texts and calling on a Blackberry without the service?

    In addition to what bewaarse said, you will not be able to use MMS either (they require data).
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • HT1391 Is there a way to view my phone contacts without my iphone being plugged in...?

    I would like to access my phone contacts without my iphone 4 being present, is this possible...?

    You phone contacts shold be sync'd with your computer and/or iCloud.
    Go to iCloud.com, log in with your AppleID/password to view your contacts.

  • After iOS8.1.3 upgrade on 5c lost Verizon cell service (works sporadically,  "No Service" most of time).

    Carrier version Verizon 18.1
    iOS version 8.1.3 (12B466)
    iPhone 5C (ME553LL/A)
    After iOS8.1.3 upgrade on 5c lost cell service (works sporadically). WiFi works fine, all other phone functions work fine.  Replaced SIM at Verizon store, updated carrier settings, did a factory reset, and nothing works.  About 20% of the day I will get service while sitting in a high-coverage area.  If
    I restart the phone several times, sometimes it re-syncs to the network. 
    Prior to iOS 8.1.3 upgrade, phone was working fine, no signal/service issues.  I am not 100% sure what version of iOS and carrier I was running prior to the upgrade (Verizon 18.0? and iOS 8.0?).  I have found no way to roll-back to the prior (working) version of iOS that I was running.
    This is an issue somewhere between Apple and Verizon, so I have found it frustrating to resolve.  I have spent ~2.5 hrs over 3 support sessions with Verizon.  Have no submitted ticket to Apple support.  Seems like others have had similar issues – but not a common issue.
    Let me know if you have suggestions while waiting for Apple to help.
    Thanks,
    John

    Couple things you can try, Reinsert the sim and power cycle the iPad. Also go to settings>general>reset then select reset subsciber services then attempt to log in to your verizon account, lastly reset network settings and see if that helps. If none of the above help, i would take to apple retail store to have serviced or replaced or contact verizon to make sure everything is good on there end as well.

Maybe you are looking for