Access control list (ACL)

hi,
I have upgraded from 8i to 11g. I am using a procedure to send email from forms10g.
After the upgrade, I am getting error.
ERROR at line 1:
ORA-24247: network access denied by access control list (ACL)
ORA-06512: at "SYS.UTL_TCP", line 17
ORA-06512: at "SYS.UTL_TCP", line 246
ORA-06512: at "SYS.UTL_SMTP", line 115
ORA-06512: at "SYS.UTL_SMTP", line 138
ORA-06512: at "HYBRID.SEND_MAIL", line 12
ORA-06512: at line 1
I created the ACL, see below .
begin
dbms_network_acl_admin.create_acl (
acl => 'utl_smtp.xml',
description => 'Allow mail to be send',
principal => 'username',
is_grant => TRUE,
privilege => 'connect'
commit;
end;
begin
dbms_network_acl_admin.add_privilege (
acl => 'utl_smtp.xml',
principal => 'username',
is_grant => TRUE,
privilege => 'resolve'
commit;
end;
begin
dbms_network_acl_admin.assign_acl(
acl => 'utl_smtp.xml',
host => 'smtp.abc.com'
commit;
end;
When i execute send_mail procedure i get the above error.
Exec send_mail('[email protected]','[email protected]','item Return','TEST MAIL') ;
Please help

Pl see if MOS Doc 557070.1 (ORA-24247 Trying To Send Email Using UTL_SMTP from 11gR1 (11.1.0.6) or higher) can help
HTH
Srini

Similar Messages

ORA-24247: network access denied by access control list (ACL)error-UTL_HTTP

I am getting following ACL error while executing following procedure:
create or replace procedure sat_proc as
http_req utl_http.req;
http_resp utl_http.resp;
BEGIN
http_req := utl_http.begin_request('www.yahoo.com');
http_resp := utl_http.get_response(http_req);
utl_http.end_response(http_resp);
END;
exec sat_proc;
ORA-29273: HTTP request failed
ORA-06512: at "SYS.UTL_HTTP", line 1130
ORA-24247: network access denied by access control list (ACL)
ORA-06512: at "TRANSDBA.SAT_PROC", line 5
ORA-06512: at line 1
I am able to execute successfully while executing above code as PL/SQL block:
DECLARE
http_req utl_http.req;
http_resp utl_http.resp;
BEGIN
http_req := utl_http.begin_request('www.yahoo.com');
http_resp := utl_http.get_response(http_req);
utl_http.end_response(http_resp);
END;
PL/SQL procedure successfully completed.
Could help me find why I am getting error while executing same code in a procedure? Is there any privilege missing?

GRANT EXECUTE ON SYS.UTL_HTTP TO <your_user>;
SQL> set time on
17:21:01 SQL> set role none;
Role set.
17:21:23 SQL> @utl_http.sql
17:21:34 SQL> DECLARE
17:21:34   2 http_req utl_http.req;
17:21:34   3 http_resp utl_http.resp;
17:21:34   4 BEGIN
17:21:34   5 http_req := utl_http.begin_request('www.yahoo.com');
17:21:34   6 http_resp := utl_http.get_response(http_req);
17:21:34   7 utl_http.end_response(http_resp);
17:21:34   8 END;
17:21:34   9 /
PL/SQL procedure successfully completed.
17:21:35 SQL> connect / as sysdba
Connected.
17:22:47 SQL> connect dbadmin/admindb
Connected.
17:23:06 SQL> @utl_http.sql
17:23:22 SQL> DECLARE
17:23:22   2 http_req utl_http.req;
17:23:22   3 http_resp utl_http.resp;
17:23:22   4 BEGIN
17:23:22   5 http_req := utl_http.begin_request('www.yahoo.com');
17:23:22   6 http_resp := utl_http.get_response(http_req);
17:23:22   7 utl_http.end_response(http_resp);
17:23:22   8 END;
17:23:22   9 /
PL/SQL procedure successfully completed.
17:23:23 SQL> set role none;
Role set.
17:23:29 SQL> @utl_http.sql
17:23:31 SQL> DECLARE
17:23:31   2 http_req utl_http.req;
17:23:31   3 http_resp utl_http.resp;
17:23:31   4 BEGIN
17:23:31   5 http_req := utl_http.begin_request('www.yahoo.com');
17:23:31   6 http_resp := utl_http.get_response(http_req);
17:23:31   7 utl_http.end_response(http_resp);
17:23:31   8 END;
17:23:31   9 /
DECLARE
ERROR at line 1:
ORA-29273: HTTP request failed
ORA-06512: at "SYS.UTL_HTTP", line 1130
ORA-24247: network access denied by access control list (ACL)
ORA-06512: at line 5
17:23:31 SQL> above is from test user
Below is from SYSDBA account
SQL> set time on
17:20:53 SQL> revoke execute on sys.utl_http to dbadmin;
revoke execute on sys.utl_http to dbadmin
ERROR at line 1:
ORA-00905: missing keyword
17:22:03 SQL> revoke execute on sys.utl_http from dbadmin;
revoke execute on sys.utl_http from dbadmin
ERROR at line 1:
ORA-04020: deadlock detected while trying to lock object
ACLiLZU+w09hR7gQAB/AQAjcw==
17:22:32 SQL> /
Revoke succeeded.
17:22:52 SQL> Edited by: sb92075 on Jun 10, 2010 5:24 PM

HR User, REST example - network access denied by access control list (ACL)

Hi,
I am new to APEX and am running the 'Oracle Developer Days' vm. I'm logged into APEX as the default HR/oracle account and I've been following the 'Creating and Using a RESTful Web Service in Application Express 4.2' training video, however when I try to retrieve information by entering a dept no. and clicking submit I get:
ORA-29273: HTTP request failed ORA-06512: at "SYS.UTL_HTTP", line 1130 ORA-24247: network access denied by access control list (ACL)
I've seen the following thread:
ORA-24247: network access denied by access control list (ACL)error-UTL_HTTP
and I've tried running the command:
GRANT EXECUTE ON SYS.UTL_HTTP TO HR;
but I'm not getting anywhere, presumably the HR user does not have permissions to access 'http://localhost:8888/apex/hr/employee_test'
Any help much appreciated, also if this is the wrong forum for this question please let me know.
Many Thanks

Hi,
Thank you for the link; I executed the first block of code to 'grant connect privileges to any host for the APEX_040200 database user' that did not work so I changed the user to HR within the code and re-executed and that seems to have done the trick. I guess the HR user is now in the power_users list/group?
Thanks again!

ORA-24247: network access denied by access control list (ACL)

Hi All,
I am sending a mail thru OWB 11g ( and using database 11g) after successful or failure of process. My process is completing successfully but am not able to send mail. At the time of sending mail it is giving me error as below
ORA-24247: network access denied by access control list (ACL)
ORA-06512: at "SYS.UTL_TCP", line 17
ORA-06512: at "SYS.UTL_TCP", line 246
ORA-06512: at "SYS.UTL_SMTP", line 115
ORA-06512: at "SYS.UTL_SMTP", line 138
ORA-06512: at line 8
I have created ACL using the following code
BEGIN
dbms_network_acl_admin.create_acl(acl => 'oramail.xml',
description => 'Network permissions for mail.oracle.com',
principal => 'OWF_MGR', is_grant => TRUE, privilege => 'connect');
DBMS_NETWORK_ACL_ADMIN.ADD_PRIVILEGE(acl => 'oramail.xml',
principal => 'OWF_MGR',
is_grant => true,
privilege => 'resolve');
DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL(acl => 'oramail.xml',
host => '141.146.46.30');
END;
commit;
where 141.146.46.30 is my mail server IP. I am still not able to send mail by OWB. Please let me know if I have missed any steps in this.
Thanks.

For Oracle Warehouse Builder 11g running in 11g dB you need to set the ACL for the OWBSYS user. For example:
EXECUTE DBMS_NETWORK_ACL_ADMIN.CREATE_ACL('acl_for_owb_cc.xml', 'ACL for Control Center', 'OWBSYS', TRUE, 'connect');
For Oracle Warehouse Builder 10.2.0.4 running in 11g dB you need to set the ACL for the OWB repository owner. For example:
EXECUTE DBMS_NETWORK_ACL_ADMIN.CREATE_ACL('acl_for_owb.xml', 'ACL for OWB', 'MY_OWB_REPO_OWNER', TRUE, 'connect');"

APEX and ORA-24247: network access denied by access control list (ACL)

Hi,
I try to send email with APEX.
I have enter the parameters of my mail server and activate the email on my application.
I have follow the APEX installation guide and apply the script given in the "Granting Connect Privileges" section.
When I try to send email or make a subscription, I don't receive any email and can see this error in the table "WWV_FLOW_MAIL_LOG"
+"MAIL_TO","MAIL_FROM","MAIL_REPLYTO","MAIL_SUBJ","MAIL_CC","MAIL_BCC","MAIL_SEND_ERROR","LAST_UPDATED_BY","LAST_UPDATED_ON","SECURITY_GROUP_ID"+
+"[email protected]","[email protected]","[email protected]","Suivi de Besoins","","","ORA-24247: network access denied by access control list (ACL)","SYS",05/03/12,3210210578052219+
+"[email protected]","[email protected]","[email protected]","Suivi de Besoins","","","ORA-24247: network access denied by access control list (ACL)","SYS",05/03/12,3210210578052219+
+"[email protected]","[email protected]","[email protected]","Suivi de Besoins","","","ORA-24247: network access denied by access control list (ACL)","SYS",05/03/12,3210210578052219+
+"[email protected]","[email protected]","[email protected]","Suivi de Besoins","","","ORA-24247: network access denied by access control list (ACL)","SYS",05/03/12,3210210578052219+
+"[email protected]","[email protected]","[email protected]","Suivi de Besoins","","","ORA-24247: network access denied by access control list (ACL)","SYS",24/02/12,3210210578052219+
+"[email protected]","[email protected]","[email protected]","Suivi de Besoins","","","ORA-24247: network access denied by access control list (ACL)","SYS",05/03/12,3210210578052219+
Do you see what is wrong in my configuration ?
I use APEX 4.1, Oracle 11g.
The script that I have apply is :
DECLARE
ACL_PATH VARCHAR2(4000);
ACL_ID    RAW(16);
BEGIN
-- Look for the ACL currently assigned to '*' and give APEX_040100
-- the "connect" privilege if APEX_040100 does not have the privilege yet.
SELECT ACL INTO ACL_PATH FROM DBA_NETWORK_ACLS
WHERE HOST = '*' AND LOWER_PORT IS NULL AND UPPER_PORT IS NULL;
-- Before checking the privilege, make sure that the ACL is valid
-- (for example, does not contain stale references to dropped users).
-- If it does, the following exception will be raised:
--+
-- ORA-44416: Invalid ACL: Unresolved principal 'APEX_040100'
-- ORA-06512: at "XDB.DBMS_XDBZ", line ...
--+
SELECT SYS_OP_R2O(extractValue(P.RES, '/Resource/XMLRef')) INTO ACL_ID
FROM XDB.XDB$ACL A, PATH_VIEW P
WHERE extractValue(P.RES, '/Resource/XMLRef') = REF(A) AND
EQUALS_PATH(P.RES, ACL_PATH) = 1;
DBMS_XDBZ.ValidateACL(ACL_ID);
IF DBMS_NETWORK_ACL_ADMIN.CHECK_PRIVILEGE(ACL_PATH, 'APEX_040100',
+'connect') IS NULL THEN+
DBMS_NETWORK_ACL_ADMIN.ADD_PRIVILEGE(ACL_PATH,
+'APEX_040100', TRUE, 'connect');+
END IF;
EXCEPTION
-- When no ACL has been assigned to '*'.
WHEN NO_DATA_FOUND THEN
DBMS_NETWORK_ACL_ADMIN.CREATE_ACL('power_users.xml',
+'ACL that lets power users to connect to everywhere',+
+'APEX_040100', TRUE, 'connect');+
DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL('power_users.xml','*');
END;
+/+
COMMIT;
Thanks for your help,

Hi,
You need to grant privilege to the user.
i.e add principal
You can use script :
DECLARE
ACL_ID   RAW(16);
CNT      NUMBER;
BEGIN
-- Look for the object ID of the ACL currently assigned to ''*
SELECT ACLID INTO ACL_ID FROM DBA_NETWORK_ACLS
WHERE HOST = '' AND LOWER_PORT IS NULL AND UPPER_PORT IS NULL;*
-- If just some users referenced in the ACL are invalid, remove just those
-- users in the ACL. Otherwise, drop the ACL completely.
SELECT COUNT(PRINCIPAL) INTO CNT FROM XDS_ACE
WHERE ACLID = ACL_ID AND
EXISTS (SELECT NULL FROM ALL_USERS WHERE USERNAME = PRINCIPAL);
IF (CNT > 0) THEN
FOR R IN (SELECT PRINCIPAL FROM XDS_ACE
WHERE ACLID = ACL_ID AND
NOT EXISTS (SELECT NULL FROM ALL_USERS
WHERE USERNAME = PRINCIPAL)) LOOP
UPDATE XDB.XDB$ACL
SET OBJECT_VALUE =
DELETEXML(OBJECT_VALUE,
*'/ACL/ACE[PRINCIPAL="'||R.PRINCIPAL||'"]')*
WHERE OBJECT_ID = ACL_ID;
END LOOP;
ELSE
DELETE FROM XDB.XDB$ACL WHERE OBJECT_ID = ACL_ID;
END IF;
END;
REM commit the changes.
COMMIT;
Or you need to add privilege to specific user/schema using following script:
BEGIN
DBMS_NETWORK_ACL_ADMIN.ADD_PRIVILEGE (
acl          => 'aclfilename.xml',
principal    => 'databaseuser',
is_grant     => TRUE,
privilege    => 'connect',
position     => null);
COMMIT;
END;
Please execute this code after connect as sysdba user.
Thanks & Regards,
Jaydipsinh Raulji
Web: [www.oracleapexconsultant.com|www.oracleapexconsultant.com]

Another ORA-24247: network access denied by access control list (ACL)

Hi
We have just upgraded from 10g to 11g (DB version is 11.2.0.1.0), and i've have nothing but problems with ACL.
I've tried:
Creation code (as dba-user):
begin
DBMS_NETWORK_ACL_ADMIN.CREATE_ACL(’netacl.xml’,
‘Allow usage to the UTL network packages’, ‘ACLTEST’, TRUE, ‘connect’);
DBMS_NETWORK_ACL_ADMIN.ADD_PRIVILEGE(’netacl.xml’ ,’ACLTEST’, TRUE, ‘resolve’);
DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL(’netacl.xml’,'*’);
commit;
end;
Execution code (as ACLTEST):
declare
l_conn UTL_TCP.connection;
v_file ftp.TStringTable;
l_list ftp.t_string_table;
begin
l_conn := ftp.Logind('DOMAIN', 21, 'USERNAME', 'PASSWORD');
ftp.logout(l_conn);
end;
Error stack
ORA-24247: network access denied by access control list (ACL)
ORA-06512: at “SYS.UTL_TCP”, line 17
ORA-06512: at “SYS.UTL_TCP”, line 246
ORA-06512: at “COMMON.FTP”, line 784
ORA-06512: at line 7
i've tried to add the domain in the acl with full port range with no luck:
begin
DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL(’netacl.xml’,'DOMAIN’,1,65000);
commit;
end;

Hi;
First what below query return
SELECT acl,
principal,
privilege,
is_grant,
to_char(start_date) ,
to_char(end_date)
FROM dba_network_acl_privileges;
Regard
Helios

ORA-24247: network access denied by access control list (ACL) using FTP

What used to work on our 10g server now doesn't work on 11g. We recently migrated to a new server and this FTP download process is the only thing that is giving me problems.
I have tried using the IP Address and Domain name, opened up the ports 10 to 80 (just in case) and even tried FTPing to a local FTP site and cannot seem to get past the ORA-24247 error. At this point I am not sure what else to try. The FTP process worked great in 10g...
begin
dbms_network_acl_admin.create_acl (
acl => 'cwtoto_acl_file.xml',
description => 'FTP Access',
principal => 'CWT_OPERATOR',
is_grant => TRUE,
privilege => 'connect',
start_date => null,
end_date => null
dbms_network_acl_admin.add_privilege (
acl => 'cwtoto_acl_file.xml',
principal => 'CWT_OPERATOR',
is_grant => TRUE,
privilege => 'resolve',
start_date => null,
end_date => null
dbms_network_acl_admin.assign_acl (
acl => 'cwtoto_acl_file.xml',
host => '69.30.63.173',
lower_port => 10,
upper_port => 80
dbms_network_acl_admin.assign_acl (
acl => 'cwtoto_acl_file.xml',
host => 'ftp.rmpc.org',
lower_port => 10,
upper_port => 80
dbms_network_acl_admin.assign_acl (
acl => 'cwtoto_acl_file.xml',
host => 'ftp.taglab.org',
lower_port => 10,
upper_port => 80
dbms_network_acl_admin.assign_acl (
acl => 'cwtoto_acl_file.xml',
host => '146.63.252.61',
lower_port => 10,
upper_port => 80
commit;
end;
Edited by: tfrawley on Jan 20, 2011 10:23 AM

So, I have contacted support to fix my inability to login to Oracle Support. In the meantime I'll just run through this problem one more time:
I executed the following:
begin
dbms_network_acl_admin.create_acl (
acl => 'cwtoto_acl_file.xml',
description => 'FTP Access',
principal => 'CWT_OPERATOR',
is_grant => TRUE,
privilege => 'connect',
start_date => null,
end_date => null
dbms_network_acl_admin.assign_acl (
acl => 'cwtoto_acl_file.xml',
host => 'ftp.rmpc.org',
lower_port => 1,
upper_port => 1000
commit;
end;
This should give me an ACL xml file and permission for CWT_OPERATOR to connect to ftp.rmpc.org on ports 1 through 1000.
I can look and see if the creation was successful: SELECT host, lower_port, upper_port, acl FROM dba_network_acls t ;
HOST LOWER_PORT UPPER_PORT ACL
1 ftp.rmpc.org 1 1000 /sys/acls/cwtoto_acl_file.xml
Looks good right?
So I test it using the following:
DECLARE
l_conn UTL_TCP.connection;
BEGIN
l_conn := ftp.login('ftp.rmpc.org','21','[email protected]','anonymous');
ftp.logout( l_conn);
END;
And get the following errors:
ORA-24247: network access denied by access control list (ACL)
ORA-06512: at "SYS.UTL_TCP", line 17
ORA-06512: at "SYS.UTL_TCP", line 246
ORA-06512: at "SYSTEM.FTP", line 49
ORA-06512: at line 4
Has anyone else tried to use UTL_TCP and experienced a simliar issue?

ORA-24247: Netzwerkzugriff von Access Control-Liste (ACL) abgelehnt

Hi,
I am trying to send email in APEX but all the emails are in APEX mail queue with error status,
ORA-24247: Netzwerkzugriff von Access Control-Liste (ACL) abgelehnt
I already configured smtp server in manage instance. Please suggest me why the error is happening.
Thanks & Regards,
Sagarika

Probably you need to add the SMTP server address to the ACL list. There are numerous resources showing how to do that. Google on "how to create acl in oracle" and you will get many links showing up. This one is explaining a how to quite good:
http://www.oracleflash.com/36/Oracle-11g-Access-Control-List-for-External-Network-Services.html
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.apress.com/9781430235125
http://apex.oracle.com/pls/apex/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
-------------------------------------------------------------------

Problem while working with Access Control List assigned to Group

Hi,
We have a following scenario for which Access Control List is not Working.
We have a group "Webi_Grp" who should acess only Webi Reports (can perform all operations related to Webi).
Following Steps are performed but still no success...
Pl. review and provide the solutions.
1) Create a Group "Webi_Grp"
2) Create user "user3"
3) Assign User to a a group (Now user3 is part of Webi_Grp)
4) Create Access Ctrl List (ACL) "Webi_ACL"
5) Goto Included Rights section of "Webi_ACL" & select "YES" for all Webi Operations.
6) User Security in ACL shows
           a) Administrator -> Full Control (Inherited)
           b) Everyone -> No Access
7) Included Right for ACL has all Webi Rights as "GRANTED", all Deski Rights "DENY", & Few of the General Rights "GRANTED"
8) Go to Users & Group
9) Select "Webi_Grp"
10) User Security
11) Add Principal
12) Add "User3" and its Security as "Webi_ACL"
13) Thus User Security in "Webi Grp" shows
          a) Administrators -> Full Control
          b) "user3" -> Webi_ACL
14) Login With "user3", but still cant create any Webi Report
Pl. let me know any further settings are required or not.
Regards,
Purav

Hi James,
Thanks for help.
I have given ACL to Universe & now user can create Adhoc Query.
But while I run this query it gives following error "You Donot Have Rights to Access Data in this Universe"
When I check the rights status in ACL we have following rights granted for "System Universe"
Create & Edit Query Based on Universe
Data Access
Edit Access Restrictions
New List of Values
etc... all other rights in this category are granted.
Still problem persist.
Could you let me know where else should I check for permissions / rights for data access.
Regards,
Purav

Access Control Lists

Hello everyone ! Can somebody tell me abt good reference material for implementing ACLs (Access Control Lists)...? Standard and extended...
Thank you !

Configuring IP Access Lists
http://www.cisco.com/en/US/customer/products/sw/secursw/ps1018/products_tech_note09186a00800a5b9a.shtml#netdiag
Configuring Commonly Used IP ACLs
http://www.cisco.com/en/US/tech/tk648/tk361/technologies_configuration_example09186a0080100548.shtml
If you find this post helpful, please don't forget to rate our posts accordingly. Thanks.

Exchange2013 preparead error: "length of the access control list exceed the allowed maximum"

Hi,
when when preparing ad (2008) for exchange 2013 installation, I get this error "length of the access control list exceed the allowed maximum"
after some searh I found this solution on http://support.microsoft.com/kb/973848/en-us
which consists on the following steps:
Click Start, click Run, type ldp, and then click OK.
In the LDP console, click the Connection menu, click Connect, type domain controller name, and then click OK.
On the Connection menu, click Bind, type the credentials of the domain administrator, and then click OK.
On the View menu, click Tree.
In BaseDN drop-down list, select the appropriate domain context, such as "DC=Contoso,DC=com," and then click OK.
In the tree view, under DC=<var><domainname></var>,DC=com, locate to the object "CN=Microsoft Exchange System objects,DC=<var><domainname></var>,DC=com".
Right-click the object in step 6, click Advanced, select Security Descriptor, make sure that the SACL option and the "Text dump" option are
unchecked and then click OK.
This will open a new window with security descriptor details
In this security descriptor Window, click to select the DACL check box.
In the middle pane of the Security descriptor Window, select and delete all the access control entries (ACEs) that have “\0ADEL:” in the Trustee column. Multiple ACEs can be selected and then click Delete
ACE to delete them.
Close the security descriptor as soon as you delete the corresponding ACE's
Close the LDP console.
Force Domain Controller replication.
Rerun Exchange setup and it will install successfully
But I didn't find the object ""CN=Microsoft Exchange System objects" since I've removed it before the preparation!!!
Can anyone help please to solve this issue??
Thanks

Hi,
Please make sure all the access control entries (ACEs) that have “\0ADEL:” in the Trustee column have been deleted in the 'Microsoft Exchange security objects' OU. Also make sure the permissions are not inherited by the root domain
so go to properties of the domain.com, If there are any unknown accounts listed in ACLs, remove all of them.
Then follow your original posting of step 10 to 13 to rerun Exchange setup to have a try.
Thanks,
Winnie Liang
TechNet Community Support

Access Control Lists on USB drive connected to AirPort Extreme

I have a Seagate 320GB drive mounted in a NexStar 2 IDE drive enclosure and connected via USB to my AirPort Extreme Base Station, running version 7.4.1 firmware upgrade.
Every time I restart the computer or unmount the network drive, an access control list appears to be written to the drive when there should be none, according to Disk Utility. I can tell when there are problems with the drive because the desktop icon turns from bright blue to grey-blue. I have to unmount the drive from the base station and connect it directly to the computer via firewire in order for Disk Utility to examine it. Generally, Disk Utility will report "Incorrect number of Access Control Lists (It should be 0 instead of (whatever number found) )
Does anyone know why these Access Control Lists are appearing? Is there any easy way to locate them and remove them, other than disconnecting it from the base station and connecting to the computer?
This problem happens with several different drives, in various NexStar 2 and NexStar 3 enclosures.

Same problem for me, exept that it happends after copying a file to the drive. It don't happend if I just mount and unmount the disc. The same for all discs I have tryed.
2009-03-04 12:59:30 +0100: Disk Utility started.
2009-03-04 12:59:43 +0100: Verifying volume “UltramaxB”
Starting verification tool: 2009-03-04 12:59:43 +0100
2009-03-04 12:59:43 +0100: Checking Journaled HFS Plus volume.
2009-03-04 12:59:43 +0100: Checking Extents Overflow file.
2009-03-04 12:59:43 +0100: Checking Catalog file.
2009-03-04 12:59:43 +0100: Checking multi-linked files.
2009-03-04 12:59:43 +0100: Checking Catalog hierarchy.
2009-03-04 12:59:43 +0100: Checking Extended Attributes file.
2009-03-04 12:59:43 +0100: Incorrect number of Access Control Lists
2009-03-04 12:59:43 +0100: 2009-03-04 12:59:43 +0100: 2009-03-04 12:59:43 +0100: (It should be 5427 instead of 5430)
2009-03-04 12:59:43 +0100: Checking volume bitmap.
2009-03-04 12:59:44 +0100: Checking volume information.
2009-03-04 12:59:44 +0100: 2009-03-04 12:59:44 +0100: The volume UltramaxB needs to be repaired.
2009-03-04 12:59:44 +0100: Error: Filesystem verify or repair failed.2009-03-04 12:59:44 +0100:
2009-03-04 12:59:44 +0100: Disk Utility stopped verifying “UltramaxB” because the following error was encountered:
Filesystem verify or repair failed.
2009-03-04 12:59:44 +0100:

Cannot sort in file/folder access control list in 8 or Server 2012

I use Windows 8 and Server 2012 Datacenter (with GUI). In 7/2008R2, I was formerly able to get properties on a file or folder, go to Security tab, click Advanced, and sort the access control list by type, access, inherited from, etc. Now, it
doesn't do anything when I click on the headings. I know I did not find this during the Beta or Release Preview periods, but I do wish this feature would be added back.
I tried to send this through MS Connect, but they said it was a Server 2008 issue. Does that mean that it was never supposed to sort? But I argue that 8 and Server 2012 have the bug. Here is an image of the window I am referring to, for
clarification:

This is really frustrating. Just got 2012 R2 management server and a week after, I noticed the same issue. The only difference is that I'm sorting AD delegation, with 150+ ACEs. While having huge lists of ACEs, it is a must of being able to sort them
by different columns. Sad that it is considered a bug - it's usually an opposite, when a bug is offered as a feature...
I still hope this will be fixed with time to come, else - it will be more practical to use PowerShell than such handicapped GUI.
MCSE, MCITP

Can't Add To Access Control List Airport Express

We have both Airport Extreme (2) and Express Base Stations (3) to create a wireless network. On the Extremes I can click the Add button in Access Control in the Airport Admin Utility to add people to the list. On all the Express Base Staions I can edit or delete entries already on the list but can't add any new ones. I can export an Access Control List but not import one. The button is greyed out only the button works. I could add to the lists in the past and I'm not sure when it stopped working. The network structure and settings have not changed. Has anyone heard of this problem?
Aiport Express Mac OS X (10.4.8)

WDS is used on two Express units to relay the signal from the main base station but not on third one which is connected directly to the network via ethernet.
On the internet connected Express the Airport Network setting is:
Wireless Mode: Create a Wireless Network (Home Router)
All base stations have the same name to allow roaming.
Internet is connected using Ethernet.

Macbook pro + access control list

Hi everyone,
i hope someone can help me here. I keep trying to sign on to my wireless network with my macbook pro and it keeps giving me the error "this network uses an access control list and you're not on the list".....so i go into my router with my desktop and turn off the access control list, and it works until i put my mac to sleep. when it wakes up, the same error message comes up again. This has happened for the last 2 months or so.
I've tried adding the macbook pro to the access control list and turning off the access control list altogether....to no avail, i get the same error message no matter what i do. The only solution that's worked is if i reset my router every single time i wake up the mac.
I have an intel macbook pro circa 2007 running on os x tiger, my router is a netgear wireless G router. i've scoured the internet for answers but can't find anything, here's to hoping someone can help me. Thanks ahead.

When you turn off access control do you restart your router. Also take a look at this link, http://support.netgear.com/app/answers/detail/a_id/13112/~/securing-your-wireles s-network%3A-access-control-list

Access control list (ACL)

Similar Messages

Maybe you are looking for