Access Control makes connection intermittent. Why?

I've set up our Airport Extreme to limit the access of my daughter's ibook on weekdays, switching connection off every day at midnight. Her connection goes back on from 6am.
For some reason, when I try to connect again at about 9am, the Airport is only visible/available intermittently. It takes a good few minutes to appear and then it disappears again a few mins later. What's going on?
It's easily fixed. I just have to switch the Airport Extreme off at the plug and back on again, then it works perfectly again. But why is this necessary?
On the weekend - when there's been no access control of her computer the night before - there's no problem at all. Please hep

going off memory, if you set security protection I don't believe access control can be set with it. Its one or the other and I think that includes Mac addressing.
You can go online to Apple/support and do a search for how to set up airport networks. The rules are stated in that 60 page document.

Similar Messages

Access Control Lists on USB drive connected to AirPort Extreme

I have a Seagate 320GB drive mounted in a NexStar 2 IDE drive enclosure and connected via USB to my AirPort Extreme Base Station, running version 7.4.1 firmware upgrade.
Every time I restart the computer or unmount the network drive, an access control list appears to be written to the drive when there should be none, according to Disk Utility. I can tell when there are problems with the drive because the desktop icon turns from bright blue to grey-blue. I have to unmount the drive from the base station and connect it directly to the computer via firewire in order for Disk Utility to examine it. Generally, Disk Utility will report "Incorrect number of Access Control Lists (It should be 0 instead of (whatever number found) )
Does anyone know why these Access Control Lists are appearing? Is there any easy way to locate them and remove them, other than disconnecting it from the base station and connecting to the computer?
This problem happens with several different drives, in various NexStar 2 and NexStar 3 enclosures.

Same problem for me, exept that it happends after copying a file to the drive. It don't happend if I just mount and unmount the disc. The same for all discs I have tryed.
2009-03-04 12:59:30 +0100: Disk Utility started.
2009-03-04 12:59:43 +0100: Verifying volume “UltramaxB”
Starting verification tool: 2009-03-04 12:59:43 +0100
2009-03-04 12:59:43 +0100: Checking Journaled HFS Plus volume.
2009-03-04 12:59:43 +0100: Checking Extents Overflow file.
2009-03-04 12:59:43 +0100: Checking Catalog file.
2009-03-04 12:59:43 +0100: Checking multi-linked files.
2009-03-04 12:59:43 +0100: Checking Catalog hierarchy.
2009-03-04 12:59:43 +0100: Checking Extended Attributes file.
2009-03-04 12:59:43 +0100: Incorrect number of Access Control Lists
2009-03-04 12:59:43 +0100: 2009-03-04 12:59:43 +0100: 2009-03-04 12:59:43 +0100: (It should be 5427 instead of 5430)
2009-03-04 12:59:43 +0100: Checking volume bitmap.
2009-03-04 12:59:44 +0100: Checking volume information.
2009-03-04 12:59:44 +0100: 2009-03-04 12:59:44 +0100: The volume UltramaxB needs to be repaired.
2009-03-04 12:59:44 +0100: Error: Filesystem verify or repair failed.2009-03-04 12:59:44 +0100:
2009-03-04 12:59:44 +0100: Disk Utility stopped verifying “UltramaxB” because the following error was encountered:
Filesystem verify or repair failed.
2009-03-04 12:59:44 +0100:

I do not see the LAN adapter and Wifi adapter in Control Panel Network Connections. Why?

Hi,
I am unable to connect to any network. When I started digging in, I reached to Control Panel > Network Connections. There I don't find any icons related to LAN connection or Wireless connection. Why could this be happening? How to investigate it further?

Your scenario #1 is a correct configuration and should work. It seems as though your Extreme is not acting as a router as I believe you intend.
Most likely, you need to reset your modem. Power it down and let it rest for a few moments. Some need longer than others. Then, I recommend you "hard reset" your Extreme (see below) and configure it again, after the modem has been reset. From then on do not change what is connected to your modem without powering it down first.
Once configured, confirm your Extreme's wireless network works as expected and that your iPad and every other wireless device can load web pages. Then, connect the printer directly to one of the Extreme's LAN ports and confirm that it works as well. After that it should work equally well with a switch between it and the Extreme, as should every other wired device connected to the switch. This assumes your switch is an unmanaged device requiring no specific configuration.
Scenario #2: Having a router connected downstream of another is not a normal configuration, so don't pursue that as a solution. It will only distract you from determining the problem. If you want to repurpose Router X as another device do so only after everything else is working to your satisfaction.
To "hard reset" an AirPort Base Station: make sure it's powered up, then press and hold its tiny reset button and keep it depressed for five to ten seconds, long enough for its LED to flash amber rapidly. Release the reset button. Then, the LED will glow amber steadily for about a minute. Then, it will flash amber, slowly, about once every second or two, waiting for you to configure it with AirPort Utility.

HT3477 Why would a Guest network need an Access Control List?

I have an Airport Extreme running software 7.6.4 and I have figured out today, to my dismay, that because I have an Access Control List active on my main network (with MAC addresses of my devices), the Guest Network feature, as implemented, becomes simply useless.
Essentially any friend coming at my place, to whom I want to share my internet connection for a while (say, a couple of hours) with an easy password, either provides me with the MAC address of his device, or has no access at all. And if he has to give me the MAC, then I could just simply add him to the main network in the first place and, BTW, I need to give him also the (complicated) password of my main network.
What is the purpose of a Guest Network then, if it is subject to the same access restrictions of the main one? I need to remove the access list on my main one, to offer quick and easy access to friends and family defeating the purpose of protecting my main network with MAC addresses and a separate guest network?
I don't get it. This is a bug. It has to be. I see no logic in it, in the way it is implemented. Or it should have 2 separate access lists, for flexibility. But a *Guest* network, should be by definition open, or easy access (with password, sure, if necessary) - and in case it should have restricted access, it should be by time maybe, not by MAC address....!

Why would a Guest Network need an Access Control List
The short answer would be that it would not need an Access Control listing......if you used the default settings in Timed Access.
Sorry, but I do not understand how you have constructed your Timed Access control list.
Normally, you would use the default settings and leave the "main" (and "guest") networks set for Unlimited Access.....and then only list the devices that you want to limit separately, establishing "rules" and timeframes for each device that you want to control.
When you do it the default way, a user would be able to connect to the Guest Network at any time, provided that he/she had the password for the guest network. No MAC Address needed at all.
If you wanted to limit the time that the "guest" could connect to the guest network, you would have to set up a "rule" for the guest. I would not normally think of limiting the time that a guest could connect.....(unless the guest were one of the grandkids).
It sounds to me as if you might have set the default network setting to No Access, and you have then set up each device with the times that they would be allowed to connect.
If you did it this way, then the default No Access would also apply to the Guest Network....and any guest would have to then be set up by MAC Address with a rule set for the times that they were allowed to connect.
Personally, I have changed the default rule for the "main" (and guest) networks from Unlimited Access to Everyday between 7:00 AM and 11:30 PM. So no one on either the main or guest network can connect before 7:00 AM or after 11:30 PM.
Then, there are a few rules that I have for devices that connect to the guest network to further limit them to certain times each day. You could do this as well for devices that you want to control on the "main" network.

IPod Touch Connecting Through Airport with Access Control

Assistance requested.
I want to connect my iPod Touch to my Airport wireless network. I have access controlled to my wireless network so that only devices with an Airport ID specified in the Airport configuration may connect to my wireless network.
Does the iPod Touch have an Airport ID that I can enter into my Airport configuration? I realy do not want to make my wireless network open to anyone.
Thank you,
Doug

Sorry,
Thank you for the contribution. I found my own answer with some searching on the iPod. This was my solution in case somebody else is having a similar problem.
Required address (Airport ID) of the iPod was found as follows:
Settings
General
About
Wi-Fi Address
Added the Wi-Fi Address to my Airport Access Control List.
On the iPod performed the following:
Settings
Wi-Fi
Choose Another Network
Typed in the wireless network name (case-sensitive)
Selected the proper security protocall
Typed in the password to access my Airport Network
Click Join
Problems connecting were resolved and my network remained closed to people not pre-approved to access it.

After trying to set up access control, my Airport Utility is no longer able to find my Base Station. My PC still sees my wireless network but I can't connect to it.

A friend told me he was able to access my network from a different device with no password so I decided to set up an access control. Following the prompts, I entered my IP address, and then my Airport stopped working. I tried uninstalling it and reinstalling it, but got the same thing. The screen I get is that "Airport Utility was unable to find any Airport wireless devices", and askes me if I want to rescan. When I rescan I get the same message. My Airport light is green and my PC recognizes the network, my software just can't connect to it. A friend suggested I entered the wrong IP address (which I found on my computer under "connections", but even after I tried a different one which is supposed to be from the network, I still get the same error message. What am I doing wrong?

A friend told me he was able to access my network from a different device with no password so I decided to set up an access control.
This could be bullsh!t on your friend's part perhaps? Do you ever recall seeing a blue-light on the base station?
Following the prompts, I entered my IP address, and then my Airport stopped working.
The acces control list is where you put in your Mac Address, this is not the same thing as an IP.

In JSF, how to make a menu with access control?

In JSF, how to make a menu with access control?
The access control can be guided by programming, database or other means if possible?
Thanks

I want to make a dvd menu in iMovie because i don't have IDVD and can't find anywhere to download it?
For making DVDs I would recommend iMovie 06 and iDVD 09 both readily available on Amazon or eBay. Shop for iLife 06 and iLife 09.
You can make menus and chapters with any version of iMovie except the latest one. There's nothing wrong with iMovie 11 either but I prefer iMovie 06.
By using iMovie 06 and iDVD 09 I make DVDs with professional moving menus with very little effort. They look almost as good as Hollywood.

My ipod 6th generation does not show in control panel on computer Windows 7.....also when I try to download from itunes, I get message network cannot make connection. can you provide me help?

My ipod 6th generation does not show in control panel on computer Windows 7....also when I try to download from itunes, I get message saying network cannot make connection. Can you help me with these issues?

Hello jrsmallwood,
I've a couple of articles that should get you back on your way!
iPod not recognized in 'My Computer' and in iTunes for Windows
http://support.apple.com/kb/TS1369
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Cheers,
Allen

Display MAC (media access control) address of connected access point.

Hi all! Sorry if this is already posted somewhere but I tried searching and was having difficulty because of the word MAC having multiple meanings here.
Anyways I want to be able to view the MAC (media access control) address of the access point I am connected to. Is this possible? I can't find it in System Preferences. Is there a terminal command that would allow me to see it? Any help would be MUCH appreciated. Thanks!

I'm looking at it right now. In the top portion, next to the active graph, it has the SSID of my access point. In the table beneath that, my access point is the first on the list, and the MAC address is clearly visible.
Second if I click on my access point in the list, the MAC address appears, temporarily at the bottom of the window.
For comparison, in the iStumbler preferences, on the AirPort tab, I have only "Auto-Select Best Network" & "Keep on Top" selected.

Apple ID does not have permission to access iTunes Connect. Why am I unable to access iTunes Connect?

I recently signed up as an Apple Developer, but I'm still unable to access iTunes Connect. Why is this?

How recently?
Are you outside the US?
Which browser are you using?

Access Control- Maximum number of RTA systems to connect to Access Control

Hi,
Is there a limit to the maximum number of RTA systems that can be connected to the GRC Access Control server ?
Thanks And Regards.
andg.

Dear Andg and Himadama,
The most recent SAP GRC Access Control 5.3 Installation Guide, published September, 2009, references the break-down of JCo connector information in Section 5. Post-Installation Configuration:
5.1.1 Creating JCo Connections to Backend Systems:
http://www.service.sap.com/
http://service.sap.com/swdc
http://help.sap.com
http://service.sap.com/bestpractices
http://www.sap.com/bestpractices
Perhaps this excerpt may clarify the utilization options for SAP JCo connections in GRC Access Control 5.3 as of SP09.
Thank you,
Shiela
Edited by: Shiela Maria Mangravito on Apr 1, 2010 1:50 PM

Why Map Definition Tool says 'cannot make connection'?

Hi, i've tried the Map Definition Tool but i cannot connect to my database. It simply displays 'cannot make connection', which is not that helpful. Is it possible to enable a debug mode or otherwise make this tool more speaking?
I've downloadad this tool from OTN on 12/11/2002 so i think it's up-to-date.
Thanks in advance.
Markus

lj, in your reply to thread 'Map Definition Tool' (Dec 17, 2002 6:42 PM) you stated that JDK 1.3 or 1.2 is needed for the Map Definition Tool to run. I ran the Map Definition Tool with JDK 1.3.1_06 and now it connects to my database!
Unfortunately it bombs when i click one of the items in the tree view, for example 'Styles/Color' (see stack trace below).
Any ideas?
Markus
-->8--
Executing query: select * FROM USER_SDO_STYLES where type='COLOR' order by name
java.sql.SQLException: ORA-00600: Interner Fehlercode, Argumente: [ttcgcshnd-1], [0], [], [], [], [], [], []
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:168)
at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:208)
at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:543)
at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1405)
at oracle.jdbc.ttc7.TTC7Protocol.fetch(TTC7Protocol.java:889)
at oracle.jdbc.driver.OracleStatement.doExecuteQuery(OracleStatement.java:1681)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1870)
at oracle.jdbc.driver.OracleStatement.executeQuery(OracleStatement.java:538)
at oracle.sdovis.util.DBTable.query(DBTable.java:110)
at oracle.eLocation.console.VisMetaImpl.getStyles(VisMetaImpl.java:308)
at oracle.eLocation.console.VisMetaImpl.getAllStyles(VisMetaImpl.java:287)
at oracle.eLocation.console.JTableStyleModel.reloadStyleData(JTableStyleModel.java:124)
at oracle.eLocation.console.StyleColorPanel$18.componentShown(StyleColorPanel.java:320)
at java.awt.Component.processComponentEvent(Component.java:3599)

Why does my iPod clock keep changing and then I can't access anything without connecting charger

Recently my iPod keeps changing time. It's seems to be losing time. When this happens I can't access anything without connecting lead and turning it off briefly.

Could the battery be dying?
Have yu tried the standard fixes:
- Reset:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backup via iTunes
- Restore the iPod to factory defaults/new iPod.

SharePoint Provider Hosted App (401) Unauthorized Microsoft.SharePoint.SPException: The Azure Access Control service is unavailable

Hello,
I'm attempting to get a SharePoint 2013 Provider Hosted Application working in a brand new SharePoint environment. I've created snapshots of both my dev and the sharepoint environments along the way and have meticulously documented every step of the
way. I've followed these instructions (among many other resources found along this journey) :
http://msdn.microsoft.com/en-us/library/fp179923(office.15).aspx
http://technet.microsoft.com/en-us/library/fp161236(office.15).aspx
http://msdn.microsoft.com/library/office/fp179901%28v=office.15%29
Upon package and publish of my application to SharePoint, I get a 401 Unauthorized error. I use Fiddler to obtain the SPErrorCorrelationID to ultimately obtain the following ULS Viewer Output. Please explain how to fix if you're able.
Please Note: I was under the impression that a Provider Hosted Application does not use the Azure Access Control service, so I'm confused as to why my system is attempting to make this connection?
Also Note: I've used a self signed and godday obtained certificate to successfully f5 debug my basic web.title (out of the visual studio 2012 box) sharepoint provider hosted application... so I know my certs are good.
Here's my ULS output:
03/24/2014 08:54:47.83   w3wp.exe (0x1448)   0x22D8   SharePoint Foundation   Logging Correlation Data   xmnv   Medium   Name=Request (GET:http://portal.cltenet.com/_layouts/15/appredirect.aspx?instance_id=22d5252f%2D392c%2D4f68%2Db820%2Da3053b9d4f24)
306c809c-66a1-d0d5-d8e2-89d3631ce1bf
03/24/2014 08:54:47.83   w3wp.exe (0x1448)   0x22D8   SharePoint Foundation   Authentication Authorization   agb9s   Medium   Non-OAuth request.
IsAuthenticated=True, UserIdentityName=0#.w|cltenet\sp.apps, ClaimsCount=25   306c809c-66a1-d0d5-d8e2-89d3631ce1bf
03/24/2014 08:54:47.83   w3wp.exe (0x1448)   0x22D8   SharePoint Foundation   Logging Correlation Data   xmnv   Medium   Site=/   306c809c-66a1-d0d5-d8e2-89d3631ce1bf
03/24/2014 08:54:47.84   w3wp.exe (0x1448)   0x22D8   SharePoint Foundation   App Deployment   acjjg   Medium   The current user has System.Threading.Thread.CurrentPrincipal.Identity.Name
= 0#.w|cltenet\sp.apps, System.Security.Principal.WindowsIdentity.GetCurrent().Name = NT AUTHORITY\IUSR, System.Web.HttpContext.Current.User.Identity.Name = 0#.w|cltenet\sp.apps.   306c809c-66a1-d0d5-d8e2-89d3631ce1bf
03/24/2014 08:54:47.84   w3wp.exe (0x1448)   0x22D8   SharePoint Foundation   App Auth   ajsrv   Medium   redirectLaunUrl after getting it from query
string, web or app instance: https://hightrust31.cltenetapps.com/Pages/Default.aspx?{StandardTokens}   306c809c-66a1-d0d5-d8e2-89d3631ce1bf
03/24/2014 08:54:47.85   w3wp.exe (0x1448)   0x22D8   SharePoint Foundation   General   aib0n   High   trying to get app tokens for site: 888b71f7-51ee-40f5-8344-8de4869d37d0
Unable to load app tokens from appInstanceId: 22d5252f-392c-4f68-b820-a3053b9d4f24   306c809c-66a1-d0d5-d8e2-89d3631ce1bf
03/24/2014 08:54:47.85   w3wp.exe (0x1448)   0x22D8   SharePoint Foundation   App Auth   ajsrw   Medium   redirectLaunUrl after getting token replacement:
https://hightrust31.cltenetapps.com/Pages/Default.aspx?SPHostUrl=http%3A%2F%2Fportal%2Ecltenet%2Ecom&SPLanguage=en%2DUS&SPClientTag=0&SPProductNumber=15%2E0%2E4420%2E1017   306c809c-66a1-d0d5-d8e2-89d3631ce1bf
03/24/2014 08:54:47.85   w3wp.exe (0x1448)   0x22D8   SharePoint Foundation   App Auth   ajsry   Medium   m_oauthAppId after NormalizeAppIdentifier()
i:0i.t|ms.sp.ext|[email protected]8df36d5d. Now getting app principal info.   306c809c-66a1-d0d5-d8e2-89d3631ce1bf
03/24/2014 08:54:47.85   w3wp.exe (0x1448)   0x22D8   SharePoint Foundation   App Auth   ajsr0   Medium   decided that we need to do a POST to the
app.   306c809c-66a1-d0d5-d8e2-89d3631ce1bf
03/24/2014 08:54:47.85   w3wp.exe (0x1448)   0x22D8   SharePoint Foundation   App Auth   ajsr1   Medium   m_redirectMessage: EndpointAuthorityMatches
306c809c-66a1-d0d5-d8e2-89d3631ce1bf
03/24/2014 08:54:47.85   w3wp.exe (0x1448)   0x22D8   SharePoint Foundation   App Auth   ajsr2   Medium   realm matched attempting to get app token
using GetAccessToken()   306c809c-66a1-d0d5-d8e2-89d3631ce1bf
03/24/2014 08:54:47.85   w3wp.exe (0x1448)   0x22D8   SharePoint Foundation   App Auth   advzm   High   Error when get token for app i:0i.t|ms.sp.ext|[email protected]8df36d5d,
exception: Microsoft.SharePoint.SPException: The Azure Access Control service is unavailable.     at Microsoft.SharePoint.ApplicationServices.SPApplicationContext.GetApplicationSecurityTokenServicesUri(SPServiceContext serviceContext)
at Microsoft.SharePoint.ApplicationServices.SPApplicationContext..ctor(SPServiceContext serviceContext, SPIdentityContext userIdentity, OAuth2EndpointIdentity applicationEndPoint)     at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForApplicationContext(SPIdentityContext
userIdentityContext, String applicationId, Uri applicationRealm, SPApplicationContextAccessTokenType applicationTokenType, SPApplicationDelegationConsentType consentValue)     at Microsoft.SharePoint.SPServerToAppServerAccessTokenManager.GetAccessTokenPrivate(SPServiceContext
serviceContext, String appId, Uri appEndpointUrl, SPAppPrincipalInfo appPrincipal, SPApplicationContextAccessTokenType tokenType, Boolean useThreadIdentity, SPUserToken userToken)   306c809c-66a1-d0d5-d8e2-89d3631ce1bf
03/24/2014 08:54:47.85   w3wp.exe (0x1448)   0x22D8   SharePoint Foundation   App Auth   ajsr3   High   App token requested from appredirect.aspx
for site: 888b71f7-51ee-40f5-8344-8de4869d37d0 but there was an error in generating it. This may be a case when we do not need a token or when the app principal was not properly set up. LaunchUrl:https://hightrust31.cltenetapps.com/Pages/Default.aspx?SPHostUrl=http://portal.cltenet.com&SPLanguage=en-US&SPClientTag=0&SPProductNumber=15.0.4420.1017
Exception Message:The Azure Access Control service is unavailable. Stacktrace:    at Microsoft.SharePoint.ApplicationServices.SPApplicationContext.GetApplicationSecurityTokenServicesUri(SPServiceContext serviceContext)
at Microsoft.SharePoint.ApplicationServices.SPApplicationContext..ctor(SPServiceContext serviceContext, SPIdentityContext userIdentity, OAuth2EndpointIdentity applicationEndPoint)     at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForApplicationContext(SPIdentityContext
userIdentityContext, String applicationId, Uri applicationRealm, SPApplicationContextAccessTokenType applicationTokenType, SPApplicationDelegationConsentType consentValue)     at Microsoft.SharePoint.SPServerToAppServerAccessTokenManager.GetAccessTokenPrivate(SPServiceContext
serviceContext, String appId, Uri appEndpointUrl, SPAppPrincipalInfo appPrincipal, SPApplicationContextAccessTokenType tokenType, Boolean useThreadIdentity, SPUserToken userToken)     at Microsoft.SharePoint.SPServerToAppServerAccessTokenManager.GetAccessTokenFromThreadIdentityOrUserToken(SPServiceContext
serviceContext, String appId, Uri appEndpointUrl, SPApplicationContextAccessTokenType tokenType, SPAppPrincipalInfo appPrincipal, Boolean useThreadIdentity, SPUserToken userToken)     at Microsoft.SharePoint.ApplicationPages.AppRedirectPage.ValidateAndProcessRequest().
Since this is a nonfatal error, it will be sanitized and posted to the app as part of the app launch.   306c809c-66a1-d0d5-d8e2-89d3631ce1bf
03/24/2014 08:54:47.85   w3wp.exe (0x1448)   0x22D8   SharePoint Foundation   General   ajlz0   High   Getting Error Message for Exception Microsoft.SharePoint.SPException:
The Azure Access Control service is unavailable.     at Microsoft.SharePoint.ApplicationServices.SPApplicationContext.GetApplicationSecurityTokenServicesUri(SPServiceContext serviceContext)     at Microsoft.SharePoint.ApplicationServices.SPApplicationContext..ctor(SPServiceContext
serviceContext, SPIdentityContext userIdentity, OAuth2EndpointIdentity applicationEndPoint)     at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForApplicationContext(SPIdentityContext userIdentityContext, String applicationId, Uri
applicationRealm, SPApplicationContextAccessTokenType applicationTokenType, SPApplicationDelegationConsentType consentValue)     at Microsoft.SharePoint.SPServerToAppServerAccessTokenManager.GetAccessTokenPrivate(SPServiceContext serviceContext,
String appId, Uri appEndpointUrl, SPAppPrincipalInfo appPrincipal, SPApplicationContextAccessTokenType tokenType, Boolean useThreadIdentity, SPUserToken userToken)     at Microsoft.SharePoint.SPServerToAppServerAccessTokenManager.GetAccessTokenFromThreadIdentityOrUserToken(SPServiceContext
serviceContext, String appId, Uri appEndpointUrl, SPApplicationContextAccessTokenType tokenType, SPAppPrincipalInfo appPrincipal, Boolean useThreadIdentity, SPUserToken userToken)     at Microsoft.SharePoint.ApplicationPages.AppRedirectPage.ValidateAndProcessRequest()
306c809c-66a1-d0d5-d8e2-89d3631ce1bf
03/24/2014 08:54:47.85   w3wp.exe (0x1448)   0x22D8   SharePoint Foundation   App Auth   aib0p   Medium   Doing appredirect from appredirect.aspx:
in site: 888b71f7-51ee-40f5-8344-8de4869d37d0 with RedirectLaunchUrl: https://hightrust31.cltenetapps.com/Pages/Default.aspx?SPHostUrl=http%3A%2F%2Fportal%2Ecltenet%2Ecom&SPLanguage=en%2DUS&SPClientTag=0&SPProductNumber=15%2E0%2E4420%2E1017
306c809c-66a1-d0d5-d8e2-89d3631ce1bf
03/24/2014 08:54:47.85   w3wp.exe (0x1448)   0x22D8   SharePoint Foundation   Monitoring   b4ly   Medium   Leaving Monitored Scope (Request (GET:http://portal.cltenet.com/_layouts/15/appredirect.aspx?instance_id=22d5252f%2D392c%2D4f68%2Db820%2Da3053b9d4f24)).
Execution Time=26.5933938531294   306c809c-66a1-d0d5-d8e2-89d3631ce1bf
Your help is very much appreciated.
With Respect,
Larry

Yes, actually - I was able to resolve it.
However I don't know how, unfortunately. I suspect it was because I needed to have the names of the certificates, defined during the certificate registration (to sharepoint) process, different.
I have a complete document that shows step by step instructions on the exact process I took to complete the provider hosted application creation, deployment and publishing. It was a daunting task, but I finished it successfully.
If there's a way to send private message on this forum, please do so and I'll respond with a way to obtain my document.
NOTE: I'm not all impressed with the way this forum works. This is supposed to be a Microsoft resource and I'll be damned if I ever get a response to highly technical questions. Completely lame. Boooooo Microsoft.

Every time I change password access control to allow access, it reverts after saving. How do I get the saved change to "take"?

Outlook keeps asking me to either use the login keychain or to use confidential information connected with my email password. I went into the keychain passwords in KeyChain Access, changed the access control on each of them to allow Outlook access. I saved the changes, but then they all reverted to their previous setting.
There is an older Keychain Access file in the Control Panel that will not open because it's either "damaged or corrupted". If I delete that, would it make a difference? What can I do to keep my access control changes when they won't stay saved?

I do not have the disc to reload
Why not? You need your system dvds to troubleshoot & to reset/change passwords in view of your current OS listed in your profile.
You can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.
If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number. Here's a list of links to all of those - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html Another resource: International Support Phone #s.
===============
I have to have the password, which I cannot remember or find.
When selecting passwords, make sure it's one that you will NEVER forget AND no one else can figure out.
Old school--- > Print it out & keep in a safe place. A place that ONLY you know about AND never forget.
New school---> Get a password manager utility. Highly recommend 1Password which is shareware. Do a Google search for free password managers.

Access Control makes connection intermittent. Why?

Similar Messages

Maybe you are looking for