Access Control v5.3 CUP Config error in Miscellaneous Configuration
Hi Experts,
We have recently upgraded from AE v5.2 to CUP v5.3 SP7 and have the following error when trying to save changes to the "Miscellaneous Configuration" parameters section:
Please enter a valid numeric value for Background Job Time Interval In Minutes, Value less than or equal to Configured Background Job interval 0"
I have tried to change it to what it asks and have attempted to make sure the Background Job interval was more than 0, but I continue to get the hard error. If you put "0" in, it returns the following error:
"Please enter a positive value for interval"
Any ideas on this one?
No, not really. I have tried to change/activate background jobs to fix this, but think i may have an issue with the back ground jobs list itself. We have repeated background jobs in the background schedule itself. Does anyone else have this? Our entries are repeated for EMail Dispatcher, Email reminder and escalation, just one group in uppercase and one in lower. I can only change the lowercase.
Below is the list of entries from the background jobs:
Background Jobs
Job Schedule
Job Name Description Start Time Next Invoke Time Current Status Job Type Days Recurrence Interval (Seconds) Active
EMAIL DISPATCHER 2/27/2007 12:00 AM PST Available Other 1-1-1-1-1-1-1-1-23 5
EMAIL REMINDER 3/27/2008 6:00 AM PDT Available Daily 0
ESCALATION 4 Hours 8/24/2007 12:00 AM PDT Available Other 1-1-1-1-1-1-1-1-23 2
Email Dispatcher EMAIL DISPATCHER 12/1/2009 1:00 AM PST 12/1/2009 1:00 AM PST Available Other 1-1-1-1-1-1-1-1-23 300
Email Reminder EMAIL REMINDER 12/1/2009 1:00 AM PST 12/1/2009 2:00 AM PST Available Other 1-1-1-1-1-1-1-2-23 300
Escalation ESCALATION 12/31/9999 8:00 AM PST Available On Date 0
HR Triggers HR TRIGGERS 12/31/9999 8:00 AM PST Available On Date 0
HR Triggers Load Data HR TRIGGERS LOAD DATA 12/31/9999 8:00 AM PST Available On Date 0
Role Reaffirm Notification ROLE REAFFIRM NOTIFICATION 12/31/9999 8:00 AM PST Available On Date 0
SOD Review Load Data with Mitigated Risks SOD Review Load Data with Mitigated Risks 12/31/9999 8:00 AM PST Available On Date 0
SOD Review Load Data without Mitigated Risks SOD Review Load Data without Mitigated Risks 12/31/9999 8:00 AM PST Available On Date 0
SOD Review Process Rejected SOD Review Process Rejected 12/31/9999 8:00 AM PST Available On Date 0
SOD Review Update WorkFlow SOD Review Update WorkFlow 12/31/9999 8:00 AM PST Available On Date 0
Stale Requests Stale Requests 12/1/2009 1:00 AM PST 12/1/2009 1:00 AM PST Available Other 1-1-1-1-1-1-1-1-23 300
UAR Review Load Data UAR Review Load Data 12/31/9999 8:00 AM PST Available On Date 0
UAR Review Process Rejected UAR Review Process Rejected 12/31/9999 8:00 AM PST Available On Date 0
UAR Review Update WorkFlow UAR Review Update WorkFlow 12/31/9999 8:00 AM PST Available On Date 0
Current Time on Server :5/12/2009 4:19 PM PDT
Similar Messages
-
GRC Access Control 5.3 CUP Role Provisioning Approval Buttons Missing
When Approvers receive a Request in Compliant User Provisioning via email they click on the link but the action buttons are missing. (example approval, reject approval buttons are missing). When they log in through the lauch pad the action buttons are visible.
Hi,
I would first check the links in the Application and redirect fields of the SMTP configuration.
Then I would check the authorisations as these buttons are governed by authorisation actions.
You can also look at the stage configuration and check whether th request reject field is set to show that button.
Simon -
Assign access control,http 404 error
Hi,
when i right click on assign access control,i receive the following error:
The page cannot be found
The page you are looking for might have been removed, had its name changed, or is temporarily unavailable.
Please try the following:
If you typed the page address in the Address bar, make sure that it is spelled correctly.
Open the server111:19000 home page, and then look for links to the information you want.
Click the Back button to try another link.
Click Search to look for information on the Internet.
HTTP 404 - File not found
Internet Explorer
Can you help me in this regard ?
Thanks,
ColDFireak123 wrote:
Its the same when I try from both port 28080 and 9000.So are you running the embedded http server on port 9000? if not and you are using OHS then try accessing Shared Services through that port e.g. http://<sharedservices>:19000/interop/index.jsp
Actually I am not sure that matters with HFM and you can go direct through 28080 or 19000, worth a try, if not maybe it just needs registering again as Pablo said.
Cheers
John
http://john-goodwin.blogspot.com/ -
Assign Access Control HTTP 404
The assign access control throws the http 404 error when i try to provision from shared services. It however works from workspace. Is this a known issue on 11.1.2.2? If there are any ways to make it work, Please post.
ak123 wrote:
Its the same when I try from both port 28080 and 9000.So are you running the embedded http server on port 9000? if not and you are using OHS then try accessing Shared Services through that port e.g. http://<sharedservices>:19000/interop/index.jsp
Actually I am not sure that matters with HFM and you can go direct through 28080 or 19000, worth a try, if not maybe it just needs registering again as Pablo said.
Cheers
John
http://john-goodwin.blogspot.com/ -
Error GRC Access Control 10.0
We have a problem when execute the next steps in GRC Access Control 10.0
SPRO-->Governance, Risk and Compliance>Access Control--> Access Risk Analysis--> Batch RisK Analysis
We applied the next note, but problem is the same.
1563583 - SYSTEM_NO_TASK_STORAGE dump on AIX
Category
ABAP Programming Error
Runtime Errors
ASSERTION_FAILED
ABAP Program
CL_GRRM_DASHBOARD_MENU_AUTH===CP
Application Component GRC-RM
Date and Time
13.03.2013 11:50:04
|Short text
|
|
The ASSERT condition was violated.
|
|What happened?
|
|
In the running application program, the ASSERT statement recognized a
|
|
situation that should not have occurred.
|
|
The runtime error was triggered for one of these reasons:
|
|
- For the checkpoint group specified with the ASSERT statement, the
|
|
activation mode is set to "abort".
|
|
- Via a system variant, the activation mode is globally set to "abort"
|
|
for checkpoint groups in this system.
|
|
- The activation mode is set to "abort" on program level.
|
|
- The ASSERT statement is not assigned to any checkpoint group.
|
|What can you do?
|
|
Note down which actions and inputs caused the error.
|
|
|
|
|
|
To process the problem further, contact you SAP system
|
|
administrator.
|
|
|
|
Using Transaction ST22 for ABAP Dump Analysis, you can look
|
|
at and manage termination messages, and you can also
|
|
keep them for a long time.
|
|Error analysis
|
|
The following checkpoint group was used: "No checkpoint group specified"
|
|
|
|
If in the ASSERT statement the addition FIELDS was used, you can find
|
|
the content of the first 8 specified fields in the following overview:
|
|
" (not used) "
|
|
" (not used) "
|
|
" (not used) "
|
|
" (not used) "
|
|
" (not used) "
|
|
" (not used) "
|
|
" (not used) "
|
|
" (not used) "
|
|How to correct the error
|
|
Probably the only way to eliminate the error is to correct the program.
|
|
|
|
|
|
If the error occures in a non-modified SAP program, you may be able to
|
|
find an interim solution in an SAP Note.
|
|
If you have access to SAP Notes, carry out a search with the following
|
|
keywords:
|
|
|
|
"ASSERTION_FAILED" " "
|
|
"CL_GRRM_DASHBOARD_MENU_AUTH===CP" or "CL_GRRM_DASHBOARD_MENU_AUTH===CM001"
|
|
"IF_GRFN_MENU_ITEM_AUTH~IS_AUTHORIZED"
|
|
|
|
If you cannot solve the problem yourself and want to send an error
|
|
notification to SAP, include the following information:
|
|
|
|
1. The description of the current problem (short dump)
|
|
|
|
To save the description, choose "System->List->Save->Local File
|
|
(Unconverted)".
|
|
|
|
2. Corresponding system log
|
|
|
|
Display the system log by calling transaction SM21.
|
|
Restrict the time interval to 10 minutes before and five minutes
|
|
after the short dump. Then choose "System->List->Save->Local File
|
|
(Unconverted)".
|
|
|
|
3. If the problem occurs in a problem of your own or a modified SAP
|
|
program: The source code of the program
|
|
In the editor, choose "Utilities->More
|
|
Utilities->Upload/Download->Download".
|
|
|
|
4. Details about the conditions under which the error occurred or which
|
|
actions and input led to the error.
|
|
|
|
|
|System environment
|
|
SAP Release..... 702
|
|
SAP Basis Level. 0012
|
|
|
|
Application server... "KIO13701"
|
|
Network address...... "172.20.1.137"
|
|
Operating system..... "AIX"
|
|
Release.............. "7.1"
|
|
Hardware type........ "00F6C78E4C00"
|
|
Character length.... 16 Bits
|
|
Pointer length....... 64 Bits
|
|
Work process number.. 10
|
|
Shortdump setting.... "full"
|
|
|
|
Database server... "KIO13701"
|
|
Database type..... "DB6"
|
|
Database name..... "DGR"
|
|
Database user ID.. "SAPDGR"
|
|
|
|
Terminal.......... "192.168.0.5"
|
|
|
|
Char.set.... "C"
|
|
|
|
SAP kernel....... 720
|
|
created (date)... "Jul 8 2012 19:43:01"
|
|
create on........ "AIX 2 5 00092901D600"
|
|
Database version. "DB6_81 "
|
|
|
|
Patch level. 300
|
|
Patch text.. " "
|
|
|
|
Database............. "DB6 08.02.*, DB6 09.*, DB6 10.*"
|
|
SAP database version. 720
|
|
Operating system..... "AIX 2 5, AIX 3 5, AIX 1 6, AIX 1 7"
|
|
|
|
Memory consumption
|
|
Roll.... 0
|
|
EM...... 8379584
|
|
Heap.... 0
|
|
Page.... 16384
|
|
MM Used. 6205712
|
|
MM Free. 2170976
|
|User and Transaction
|
|
Client.............. 100
|
|
User................ "LVELASCO"
|
|
Language key........ "E"
|
|
Transaction......... " "
|
|
Transaction ID...... "51400164B1F00C40E1008000AC140189"
|
|
|
|
EPP Whole Context ID.... "5140015EB1F00C40E1008000AC140189"
|
|
EPP Connection ID....... "5140F9B0B19C1150E1008000AC140189"
|
|
EPP Caller Counter...... 1
|
|
|
|
Program............. "CL_GRRM_DASHBOARD_MENU_AUTH===CP"
|
|
Screen.............. "SAPMHTTP 0010"
|
|
Screen Line......... 2
|
|
Debugger Active..... "none"
|
|Server-Side Connection Information
|
|
Information on Caller of "HTTPS" Connection:
|
|
Plug-in Type.......... "HTTPS"
|
|
Caller IP............. "192.168.0.5"
|
|
Caller Port........... 44300
|
|
Universal Resource ID. "/sap/bc/webdynpro/sap/grfn_service_map"
|
|
|
|
Program............. "CL_GRRM_DASHBOARD_MENU_AUTH===CP"
|
|
Screen.............. "SAPMHTTP 0010"
|
|
Screen Line......... 2
|
|
|
|
Information on Caller ofr "HTTPS" Connection:
|
|
Plug-in Type.......... "HTTPS"
|
|
Caller IP............. "192.168.0.5"
|
|
Caller Port........... 44300
|
|
Universal Resource Id. "/sap/bc/webdynpro/sap/grfn_service_map"
|
|Information on where terminated
|
|
Termination occurred in the ABAP program "CL_GRRM_DASHBOARD_MENU_AUTH===CP" -
|
|
in "IF_GRFN_MENU_ITEM_AUTH~IS_AUTHORIZED".
|
|
The main program was "SAPMHTTP ".
|
|
|
|
In the source code you have the termination point in line 59
|
|
of the (Include) program "CL_GRRM_DASHBOARD_MENU_AUTH===CM001".
|
|Source Code Extract (Source code has changed)
|
|Line |SourceCde
|
| 29|
lv_dashboard = lv_value.
|
| 30|
|
| 31|
TRANSLATE lv_dashboard TO UPPER CASE.
|
| 32|
|
| 33|
CASE lv_dashboard.
|
| 34|
WHEN 'HEATMAP'.
|
| 35|
lv_report = 'GRRM_HEATMAP'.
|
| 36|
|
| 37|
WHEN 'LOSS_OVERVIEW' OR 'LOSS_STRUCTURE' OR 'OB_LOSS_OVERVIEW' OR 'OB_LOSS_STRUCTU|
| 38|
lv_report = 'GRRM_LOSS_ANALYSIS'.
|
| 39|
|
| 40|
WHEN 'OVERVIEW'.
|
| 41|
lv_report = 'GRRM_OVERVIEW'.
|
| 42|
|
| 43|
WHEN OTHERS.
|
| 44|
ASSERT 1 = 2.
|
| 45|
|
| 46|
ENDCASE.
|
| 47|
|
| 48|
EXIT.
|
| 49|
|
| 50|
ENDLOOP.
|
| 51|
|
| 52|
WHEN 'GRRM_LOSS_MATRIX' OR 'GRRM_LOSS_MATRIX_NEW'.
|
| 53|
lv_report = 'GRRM_LOSS_ANALYSIS'.
|
| 54|
|
| 55|
WHEN 'GRRM_HEATMAP_REPORT'.
|
| 56|
lv_report = 'GRRM_HEATMAP'.
|
| 57|
|
| 58|
WHEN OTHERS.
|
|>>>>>|
ASSERT 1 = 2.
|
| 60|
|
| 61| ENDCASE.
|
| 62|
|
| 63| TRY.
|
| 64|
lv_regulation_id = cl_grfn_api_regulation=>if_grfn_api_regulation~get_regulation_id( i|
| 65|
|
| 66|
ev_authorized = cl_grfn_util_rep_auth=>has_rep_auth(
|
| 67|
io_session
= io_session
|
| 68|
iv_regulation_id = lv_regulation_id
|
| 69|
iv_report
= lv_report
|
| 70|
iv_activity
= grfn0_c_activity-print
|
| 71|
|
| 72|
|
| 73|
CATCH cx_grfn_exception.
|
| 74|
ev_authorized = abap_false.
|
| 75|
|
| 76| ENDTRY.
|
| 77|
|
| 78|ENDMETHOD.
|
|Contents of system fields
|
|Name
|Val.
|
|SY-SUBRC|4
|
|SY-INDEX|2
|
|SY-TABIX|1
|
|SY-DBCNT|1
|
|SY-FDPOS|0
|
|SY-LSIND|0
|
|SY-PAGNO|0
|
|SY-LINNO|1
|
|SY-COLNO|1
|
|SY-PFKEY|
|
|SY-UCOMM|
|
|SY-TITLE|HTTP Control
|
|SY-MSGTY|
|
|SY-MSGID|
|
|SY-MSGNO|000
|
|SY-MSGV1|
|
|SY-MSGV2|
|
|SY-MSGV3|
|
|SY-MSGV4|
|
|SY-MODNO|0
|
|SY-DATUM|20130313
|
|SY-UZEIT|115004
|
|SY-XPROG|SAPCNVE
|
|SY-XFORM|CONVERSION_EXIT
|
|Active Calls/Events
|
|No. Ty.
Program
Include
Line |
|
Name
|
| 34 METHOD
CL_GRRM_DASHBOARD_MENU_AUTH===CP
CL_GRRM_DASHBOARD_MENU_AUTH===CM001
59 |
|
CL_GRRM_DASHBOARD_MENU_AUTH=>IF_GRFN_MENU_ITEM_AUTH~IS_AUTHORIZED
|
| 33 METHOD
CL_GRFN_API_MENU_ITEM_ELA=====CP
CL_GRFN_API_MENU_ITEM_ELA=====CM001 126 |
|
CL_GRFN_API_MENU_ITEM_ELA=>IF_GRFN_MENU_AUTH~ITEM_AUTH
|
| 32 METHOD
CL_GRFN_API_MENU==============CP
CL_GRFN_API_MENU==============CM003
34 |
|
CL_GRFN_API_MENU=>IF_GRFN_MENU_AUTH~ITEM_AUTH
|
| 31 METHOD
CL_GRFN_LAUNCHPAD_UIBB========CP
CL_GRFN_LAUNCHPAD_UIBB========CM006
60 |
|
CL_GRFN_LAUNCHPAD_UIBB=>IF_FPM_GUIBB_LAUNCHPAD~MODIFY
|
| 30 METHOD
CL_FPM_LAUNCHPAD_UIBB_ASSIST==CP
CL_FPM_LAUNCHPAD_UIBB_ASSIST==CM001
76 |
|
CL_FPM_LAUNCHPAD_UIBB_ASSIST=>INIT_FEEDER
|
| 29 METHOD
/1BCWDY/T2POSMRSKMLY9L6LJP5Z==CP
/1BCWDY/B_T2POSBAR6C8HPR0XTR4P
410 |
|
CL_COMPONENTCONTROLLER_CTR=>WDDOINIT
|
|
Web Dynpro Component
FPM_LAUNCHPAD_UIBB
|
|
Controller
COMPONENTCONTROLLER
|
| 28 METHOD
/1BCWDY/T2POSMRSKMLY9L6LJP5Z==CP
/1BCWDY/B_T2POSBAR6C8HPR0XTR4P
181 |
|
CLF_COMPONENTCONTROLLER_CTR=>IF_WDR_COMPONENT_DELEGATE~WD_DO_INIT
|
|
Web Dynpro Component
FPM_LAUNCHPAD_UIBB
|
|
Controller
COMPONENTCONTROLLER
|
| 27 METHOD
CL_WDR_DELEGATING_COMPONENT===CP
CL_WDR_DELEGATING_COMPONENT===CM004
9 |
|
CL_WDR_DELEGATING_COMPONENT=>DO_INIT
|
| 26 METHOD
CL_WDR_CONTROLLER=============CP
CL_WDR_CONTROLLER=============CM00V
3 |
|
CL_WDR_CONTROLLER=>INIT_CONTROLLER
|
| 25 METHOD
CL_WDR_COMPONENT==============CP
CL_WDR_COMPONENT==============CM019
24 |
|
CL_WDR_COMPONENT=>INIT_CONTROLLER
|
| 24 METHOD
CL_WDR_CONTROLLER=============CP
CL_WDR_CONTROLLER=============CM002
7 |
|
CL_WDR_CONTROLLER=>INIT
|
| 23 METHOD
CL_WDR_CLIENT_COMPONENT=======CP
CL_WDR_CLIENT_COMPONENT=======CM00E
24 |
|
CL_WDR_CLIENT_COMPONENT=>INIT
|
| 22 METHOD
CL_WDR_CLIENT_COMPONENT=======CP
CL_WDR_CLIENT_COMPONENT=======CM00A
42 |
|
CL_WDR_CLIENT_COMPONENT=>IF_WDR_COMPONENT_FACTORY~CREATE_COMPONENT
|
| 21 METHOD
CL_WDR_COMPONENT_USAGE========CP
CL_WDR_COMPONENT_USAGE========CM009
67 |
|
CL_WDR_COMPONENT_USAGE=>IF_WD_COMPONENT_USAGE~CREATE_COMPONENT
|
| 20 METHOD
CL_FPM_COMPONENT_MANAGER======CP
CL_FPM_COMPONENT_MANAGER======CM003
81 |
|
CL_FPM_COMPONENT_MANAGER=>ADD_COMPONENT
|
| 19 METHOD
CL_FPM_COMPONENT_MANAGER======CP
CL_FPM_COMPONENT_MANAGER======CM004
19 |
|
CL_FPM_COMPONENT_MANAGER=>ATTACH_COMPONENT_TO_USAGE
|
| 18 METHOD
CL_FPM========================CP
CL_FPM========================CM005
89 |
|
CL_FPM=>PROCESS_EVENT
|
| 17 METHOD
CL_FPM========================CP
CL_FPM========================CM00C
34 |
|
CL_FPM=>RUN_EVENT_LOOP
|
| 16 METHOD
CL_FPM========================CP
CL_FPM========================CM002
5 |
|
CL_FPM=>IF_FPM~RAISE_EVENT
|
| 15 METHOD
CL_FPM========================CP
CL_FPM========================CM003
11 |
|Hi Alberto,
The below Notes should resolve!
1428775
1744179
Hope this helps,
Luciana -
ORA-24247: network access denied by access control list (ACL)error-UTL_HTTP
I am getting following ACL error while executing following procedure:
create or replace procedure sat_proc as
http_req utl_http.req;
http_resp utl_http.resp;
BEGIN
http_req := utl_http.begin_request('www.yahoo.com');
http_resp := utl_http.get_response(http_req);
utl_http.end_response(http_resp);
END;
exec sat_proc;
ORA-29273: HTTP request failed
ORA-06512: at "SYS.UTL_HTTP", line 1130
ORA-24247: network access denied by access control list (ACL)
ORA-06512: at "TRANSDBA.SAT_PROC", line 5
ORA-06512: at line 1
I am able to execute successfully while executing above code as PL/SQL block:
DECLARE
http_req utl_http.req;
http_resp utl_http.resp;
BEGIN
http_req := utl_http.begin_request('www.yahoo.com');
http_resp := utl_http.get_response(http_req);
utl_http.end_response(http_resp);
END;
PL/SQL procedure successfully completed.
Could help me find why I am getting error while executing same code in a procedure? Is there any privilege missing?GRANT EXECUTE ON SYS.UTL_HTTP TO <your_user>;
SQL> set time on
17:21:01 SQL> set role none;
Role set.
17:21:23 SQL> @utl_http.sql
17:21:34 SQL> DECLARE
17:21:34 2 http_req utl_http.req;
17:21:34 3 http_resp utl_http.resp;
17:21:34 4 BEGIN
17:21:34 5 http_req := utl_http.begin_request('www.yahoo.com');
17:21:34 6 http_resp := utl_http.get_response(http_req);
17:21:34 7 utl_http.end_response(http_resp);
17:21:34 8 END;
17:21:34 9 /
PL/SQL procedure successfully completed.
17:21:35 SQL> connect / as sysdba
Connected.
17:22:47 SQL> connect dbadmin/admindb
Connected.
17:23:06 SQL> @utl_http.sql
17:23:22 SQL> DECLARE
17:23:22 2 http_req utl_http.req;
17:23:22 3 http_resp utl_http.resp;
17:23:22 4 BEGIN
17:23:22 5 http_req := utl_http.begin_request('www.yahoo.com');
17:23:22 6 http_resp := utl_http.get_response(http_req);
17:23:22 7 utl_http.end_response(http_resp);
17:23:22 8 END;
17:23:22 9 /
PL/SQL procedure successfully completed.
17:23:23 SQL> set role none;
Role set.
17:23:29 SQL> @utl_http.sql
17:23:31 SQL> DECLARE
17:23:31 2 http_req utl_http.req;
17:23:31 3 http_resp utl_http.resp;
17:23:31 4 BEGIN
17:23:31 5 http_req := utl_http.begin_request('www.yahoo.com');
17:23:31 6 http_resp := utl_http.get_response(http_req);
17:23:31 7 utl_http.end_response(http_resp);
17:23:31 8 END;
17:23:31 9 /
DECLARE
ERROR at line 1:
ORA-29273: HTTP request failed
ORA-06512: at "SYS.UTL_HTTP", line 1130
ORA-24247: network access denied by access control list (ACL)
ORA-06512: at line 5
17:23:31 SQL> above is from test user
Below is from SYSDBA account
SQL> set time on
17:20:53 SQL> revoke execute on sys.utl_http to dbadmin;
revoke execute on sys.utl_http to dbadmin
ERROR at line 1:
ORA-00905: missing keyword
17:22:03 SQL> revoke execute on sys.utl_http from dbadmin;
revoke execute on sys.utl_http from dbadmin
ERROR at line 1:
ORA-04020: deadlock detected while trying to lock object
ACLiLZU+w09hR7gQAB/AQAjcw==
17:22:32 SQL> /
Revoke succeeded.
17:22:52 SQL> Edited by: sb92075 on Jun 10, 2010 5:24 PM -
"Assign Access Control" returns error for essbase apps in shared services
Hello,
I installed and configured Oracle EPM 11.1.2 (Foundation, Essbase, Planning, Reporting&Analysis):
OS: Windows Server 2008 Sp2 (32bit)
Default Installation with default ports,
Installation of all components on the same server,
no clustering
EPM System Diagnostic says that everything is OK.
Now I want to assign filter access for an essbase database in the Shared Services.
Starting the menu item "Assign Access Control" in Shared Services returns the following error:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
+10.4.5 404 Not Found+
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
+....+
Can anybody help ???
best regards,
NicoleHello,
here's what I found out so far:
I get the error if I start the shared services console via the URL "http://servername:port/interop/index.jsp" and then select the "assign access control" for an essbase database.
If I start the shared services console via the workspace everything works fine.
Does anybody know what to do so that it also works if I start the shared services console via URL?
best regards,
Nicole -
Business Rules Framework (BRF) with Access Controll V10 (ERM and CUP)
Hi Experts,
where can I find some information about the usage of BRF with respect to Access Controll (especially ERM and CUP)?
Thanks in advance and best regards,
MarlenHi Marlen,
For ramp-up customers we have ramp-up knowledge transfer to be found here:
http://service.sap.com/rkt
If you are not participating in the AC 10.0 ramp-up you would need to wait until the product is general available.
For general information on BRF have look here:
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/43/8b85c9db2f614fe10000000a1553f7/frameset.htm
Best,
Frank -
Add Fields in CUP Request - SAP GRC Access Control 5.3
Dear Friends,
I am wondering on how to add fields value in CUP (Compliant User Provisioning) SAP GRC AC 5.3.
Currently i'm leading 9 SAP Security Coordinators in Indonesia and i want to create Performance Metrics on how long the CUP Requests is processed. It needs to enhance the CUP by adding value Delegation of Authority and the record no. of the DOA requests.
Really appreciate your inputs on how to add fields value in CUP.
Thank you so much
-Mesti-
Edited by: AnnisaPramesti on Jan 2, 2012 5:37 PMHi.
Check under http://service.sap.com/instguides
SAP BusinessObjects -> SAP BusinessObjects Governance, Risk, Compliance (GRC) -> Access Control -> SAP GRC Access Control 5.3
Cheers,
Diego. -
Error while turning on Access control for web proxy
When I try turning on access control setting for the service (using web-based server admin page: sever preferences->restrict access), i got this pop-up error message:
System Error:
The POST variables could not be read from stdin.
Environment:
Windows2000 SP2
Sun ONE WebProxy 3.6 SP1
File-System NTFS
ThxHi,
Please mention on which platform you have installed the iplanet web proxy server. If it is on NT then make sure it must on NTFS partition.
refer the following link for more details
http://docs.iplanet.com/docs/manuals/proxy/36/adminnt/contents.htm -
Access Control - Function - error
Hi guys,
I was following "" Application Express Advanced Tutorials How to build an Access Control page ""
But the function in the tutorial would not work:
http://download.oracle.com/docs/cd/E14373_01/appdev.32/e13363/acl.htm#CHDDDFBD
CREATE OR REPLACE FUNCTION acl_custom_auth (
p_username IN VARCHAR2,
p_password IN VARCHAR2)
RETURN BOOLEAN IS
BEGIN
FOR c1 IN (SELECT 1
FROM acl_employees
WHERE upper(userid) = upper(p_username)
AND upper(last_name) = upper(p_password))
LOOP
RETURN TRUE;
END LOOP;
RETURN FALSE;
END;
Could you please tell where is the mistake??
What is " c1 " in the function??
Thanks In Advance,
FatehThanks Alex,
Having done what you advised, I got the following error:
1 error has occurred
ORA-06550: line 2, column 1: PLS-00103: Encountered the symbol "CREATE" when expecting one of the following: ( begin case declare end exception exit
for goto if loop mod null pragma raise return select update while with <an identifier> <a double-quoted delimited-identifier> <a bind variable> << continue
close current delete fetch lock insert open rollback savepoint set sql execute commit forall merge pipe purgePerhaps you can take a look at the App,
workspace: somefeto
username: [email protected]
password: QQWWEE!1
App: 40807. ACL_EMPLOYEES
App credentials :
dev
dev
Best Regards, -
Hi Team,
As of IDM 7.2 SP8 patch2, when we use Enterprise role or Privilege in the access control definition of a task, accessing this task from UI5 i.e REST API is giving unauthorized error even though user is already having the required role or privilege.
But the task is working fine if we use fixed user ID or keeping blank value in allowed users field.
Attached the current access control definition of the task we configured & the error message info for reference
Regards,
Venkata BavirisettyHi Ralitsa,
Thanks for your response and sorry for late reply.
The XXXX in role is not used as a wild card. the name itself is in that format. I have searched the role and then selected from search list.
Let me know if you need any clarifications?
Refards,
Venkata Bavirisetty -
ERROR does not support access control lists
Please be patient ...
guiengine: login in process.
INFO 2004-07-19 16:33:45 [syxxcfile.cpp:346]
CSyFileImpl::copy(iastring)
Copying file C:/Program Files/sapinst_instdir/j2ee-sneak-preview/install/keydb.xml to: q0w9e9r8t7.1.xml.
INFO 2004-07-19 16:33:45 [syxxcfile.cpp:446]
CSyFileImpl::copy(iastring)
Copying file C:/Program Files/sapinst_instdir/j2ee-sneak-preview/install/keydb.xml to: q0w9e9r8t7.1.xml.
INFO 2004-07-19 16:33:45 [synxcnodut.cpp:339]
CSyNodeUtils::createNodeWithType(iastring,bool,ISyNode::eNodeType,iastring)
Creating file C:\Program Files\sapinst_instdir\j2ee-sneak-preview\install\q0w9e9r8t7.1.xml.
INFO 2004-07-19 16:33:47 [syxxcfile.cpp:346]
CSyFileImpl::copy(iastring)
Copying file C:/Program Files/sapinst_instdir/j2ee-sneak-preview/install/keydb.xml to: C:/Program Files/sapinst_instdir/j2ee-sneak-preview/install/keydb.1.xml.
INFO 2004-07-19 16:33:47 [syxxcfile.cpp:446]
CSyFileImpl::copy(iastring)
Copying file C:/Program Files/sapinst_instdir/j2ee-sneak-preview/install/keydb.xml to: C:/Program Files/sapinst_instdir/j2ee-sneak-preview/install/keydb.1.xml.
INFO 2004-07-19 16:33:47 [synxcnodut.cpp:339]
CSyNodeUtils::createNodeWithType(iastring,bool,ISyNode::eNodeType,iastring)
Creating file C:\Program Files\sapinst_instdir\j2ee-sneak-preview\install\keydb.1.xml.
INFO 2004-07-19 16:33:49 [ianxbusprv.cpp:337]
CIaNtUserPrivileges::add_impl(., ASIAPACIFIC\chirutha, SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege)
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'ASIAPACIFIC\chirutha' on host '.'.
PHASE 2004-07-19 16:33:52 [iaxxcwalker.cpp:409]
CDomWalker::printPhaseInfo()
Prepare the installation program.
INFO 2004-07-19 16:33:57 [iaxxcwalker.cpp:59]
CDomWalker::walk()
Installation start: Monday, 19 July 2004, 16:33:45; installation directory: C:\Program Files\sapinst_instdir\j2ee-sneak-preview\install; product to be installed: Sneak Preview Edition of SAP Web Application Server Java 6.40> Install SAP Web Application Server Java 6.40
INFO 2004-07-19 16:34:03
CJSlibModule::writeLogEntry()
DNS is configured correctly.
INFO[E] 2004-07-19 16:34:07 [synxcfsmgt.cpp:126]
CSyFileSystemMgtImpl::getFSExport(iastring)
File system export (share) saploc does not exist.
INFO[E] 2004-07-19 16:34:23 [synxcuser.cpp:98]
CSyUserImpl::CSyUserImpl(const CUserData&, bool)
Account user="j2eadm" does not exist. <#1>
INFO[E] 2004-07-19 16:34:27 [synxcfsmgt.cpp:126]
CSyFileSystemMgtImpl::getFSExport(iastring)
File system export (share) saploc does not exist.
INFO 2004-07-19 16:34:28
CJSlibModule::writeLogEntry()
Looking for WebAS instances installed on this host...
INFO 2004-07-19 16:34:28
CJSlibModule::writeLogEntry()
No installed instances found!
WARNING[E] 2004-07-19 16:34:29 [syxxcnamrs.cpp:125]
PSyServicesEntry CSyIPNameResolverImpl::getServiceByName(const iastring& serviceName, const iastring& protocol) const
Error converting from service name=sapmsJ2E/protocol=tcp to port number. SAPRETURN=12
WARNING[E] 2004-07-19 16:34:29 [syxxcnamrs.cpp:334]
PSyServicesEntry CSyIPNameResolverImpl::getServiceByPort(const unsigned int portNumber, const iastring& protocol) const
Error converting from port number=3601/protocol=tcp to service names. SAPRETURN=12
INFO[E] 2004-07-19 16:34:33 [synxcuser.cpp:98]
CSyUserImpl::CSyUserImpl(const CUserData&, bool)
Account user="chiruthad1\j2eadm" does not exist. <#1>
INFO[E] 2004-07-19 16:34:38 [synxcuser.cpp:98]
CSyUserImpl::CSyUserImpl(const CUserData&, bool)
Account user="chiruthad1\SAPServiceJ2E" does not exist. <#1>
INFO 2004-07-19 16:34:38 [syxxcfile.cpp:346]
CSyFileImpl::copy(iastring)
Copying file C:/Program Files/SAPinst_WAS/J2EE-CD/JDKVersion.xml to: ..
INFO 2004-07-19 16:34:38 [syxxcfile.cpp:446]
CSyFileImpl::copy(iastring)
Copying file C:/Program Files/SAPinst_WAS/J2EE-CD/JDKVersion.xml to: ..
INFO 2004-07-19 16:34:38 [synxcnodut.cpp:339]
CSyNodeUtils::createNodeWithType(iastring,bool,ISyNode::eNodeType,iastring)
Creating file C:\Program Files\sapinst_instdir\j2ee-sneak-preview\install\JDKVersion.xml.
INFO[E] 2004-07-19 16:34:38 [syxxccuren.hpp:192]
CSyCurrentProcessEnvironmentImpl::getEnvironmentVariable(iastring)
Unable to get value for environment variable JAVA_HOME.
INFO 2004-07-19 16:34:39
CJSlibModule::writeLogEntry()
Execution of the command "C:/j2sdk1.4.2_04/bin/java.exe '-version'" finished with return code 0. Output: 1.4.2_04
INFO 2004-07-19 16:34:40
CJSlibModule::writeLogEntry()
Execution of the command "C:/j2sdk1.4.2_03/bin/java.exe '-version'" finished with return code 0. Output: 1.4.2_03
WARNING 2004-07-19 16:34:40
CJSlibModule::writeLogEntry()
Directory C:/WINNT is not a valid JDK directory: the java executable is missing.
INFO 2004-07-19 16:34:40
CJSlibModule::writeLogEntry()
Found valid JAVA_HOME directory C:\j2sdk1.4.2_04 with JDK version 1.4.2_04.
INFO 2004-07-19 16:34:40
CJSlibModule::writeLogEntry()
Execution of the command "C:\j2sdk1.4.2_04/bin/java.exe '-version'" finished with return code 0. Output: 1.4.2_04
INFO[E] 2004-07-19 16:34:41 [syxxccuren.hpp:192]
CSyCurrentProcessEnvironmentImpl::getEnvironmentVariable(iastring)
Unable to get value for environment variable SAPINST_DEBUG_TRACE.
INFO[E] 2004-07-19 16:34:46 [synxcfsmgt.cpp:126]
CSyFileSystemMgtImpl::getFSExport(iastring)
File system export (share) saploc does not exist.
INFO[E] 2004-07-19 16:34:48 [synxcfsmgt.cpp:126]
CSyFileSystemMgtImpl::getFSExport(iastring)
File system export (share) saploc does not exist.
INFO[E] 2004-07-19 16:35:09 [synxcfsmgt.cpp:126]
CSyFileSystemMgtImpl::getFSExport(iastring)
File system export (share) saploc does not exist.
INFO 2004-07-19 16:35:22
CJSlibModule::writeLogEntry()
Execution of the command "C:\j2sdk1.4.2_04/bin/java.exe '-version'" finished with return code 0. Output: 1.4.2_04
Transaction begin ********************************************************
ERROR 2004-07-19 16:35:22
CJSlibModule::writeLogEntry()
The file system on drive C: does not support access control lists. Choose a different drive.
Transaction end **********************************************************
WARNING 2004-07-19 16:35:22 [iaxxccntrl.cpp:474]
CController::stepExecuted()
The step checkParameters with step key J2EE_Workplace|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDefault|ind|ind|ind|WebAS|630|0|J2EE_Engine|ind|ind|ind|J2EE_Engine|630|0|checkParameters was executed with status ERROR.
SAPinst component stack:
========================
Preinstall|ind|ind|ind|ind|ind|0
Current script:
===============
if (context.getBool("installJ2EEEngine") && ! context.getBool('applyPatch')) {
ASSERT(arguments.callee, context.get("JAVA_HOME"), "JAVA_HOME ist not set.");
var jh = context.get("JAVA_HOME");
var len = jh.length;
if (jh.substr(len-1) == "/" || jh.substr(len-1) == "
jh = jh.substr(0, len-1);
context.set("JAVA_HOME", jh);
var versions = Java.readVersionFile(installer.getCD("J2EE"));
var version = Java.checkHome(jh, versions.minVersion, versions.maxVersion);
if (!version) {
installer.writeErrorWithArray(Java.errorMessage);
} else if (Java.compareVersions(version, versions.maxVersion) != -1) {
installer.writeWarningWithArray(Java.errorMessage);
var drives = ["WindowsDrive", "DBDataDrive", "DBRedologDrive", "DBSoftwareDrive"];
for (var i = 0; i < drives.length; ++i) {
var drive = context.get(drives<i>);
if (drive && ! check_drive(drive)) {
installer.writeError("ind-rel.ind-os.ind-db.j2ee-eng.noFAT", drive);
WARNING 2004-07-19 16:36:48 [iaxxcsihlp.hpp:183]
main()
An error occurred during the installation.
Exit status of child: 1Hi Stefan,
Thanks.
Regards,
krishna -
Exchange2013 preparead error: "length of the access control list exceed the allowed maximum"
Hi,
when when preparing ad (2008) for exchange 2013 installation, I get this error "length of the access control list exceed the allowed maximum"
after some searh I found this solution on http://support.microsoft.com/kb/973848/en-us
which consists on the following steps:
Click Start, click Run, type ldp, and then click OK.
In the LDP console, click the Connection menu, click Connect, type domain controller name, and then click OK.
On the Connection menu, click Bind, type the credentials of the domain administrator, and then click OK.
On the View menu, click Tree.
In BaseDN drop-down list, select the appropriate domain context, such as "DC=Contoso,DC=com," and then click OK.
In the tree view, under DC=<var><domainname></var>,DC=com, locate to the object "CN=Microsoft Exchange System objects,DC=<var><domainname></var>,DC=com".
Right-click the object in step 6, click Advanced, select Security Descriptor, make sure that the SACL option and the "Text dump" option are
unchecked and then click OK.
This will open a new window with security descriptor details
In this security descriptor Window, click to select the DACL check box.
In the middle pane of the Security descriptor Window, select and delete all the access control entries (ACEs) that have “\0ADEL:” in the Trustee column. Multiple ACEs can be selected and then click Delete
ACE to delete them.
Close the security descriptor as soon as you delete the corresponding ACE's
Close the LDP console.
Force Domain Controller replication.
Rerun Exchange setup and it will install successfully
But I didn't find the object ""CN=Microsoft Exchange System objects" since I've removed it before the preparation!!!
Can anyone help please to solve this issue??
ThanksHi,
Please make sure all the access control entries (ACEs) that have “\0ADEL:” in the Trustee column have been deleted in the 'Microsoft Exchange security objects' OU. Also make sure the permissions are not inherited by the root domain
so go to properties of the domain.com, If there are any unknown accounts listed in ACLs, remove all of them.
Then follow your original posting of step 10 to 13 to rerun Exchange setup to have a try.
Thanks,
Winnie Liang
TechNet Community Support -
Issue while enabling Access Control for a Coherence server node
Hi
Im trying to enable access control for a Coherence server node, using the default Keystore login method shipped with Coherence. When i start the server i get the error "java.security.AccessControlException: Unsufficient rights to perform the operation". Please see below for the sequence of steps I've followed to enable access control. I just need to be enable Authentication (not authorization) at this stage
1. I have added the following entry in the Coherence Operational override file
<security-config>
<enabled system-property="tangosol.coherence.security">true</enabled>
<login-module-name>Coherence</login-module-name>
<access-controller>
<class-name>com.tangosol.net.security.DefaultController</class-name>
<init-params>
<init-param id="1">
<param-type>java.io.File</param-type>
<param-value>keystore.jks</param-value>
</init-param>
<init-param id="2">
<param-type>java.io.File</param-type>
<param-value>permissions.xml</param-value>
</init-param>
</init-params>
</access-controller>
<callback-handler>
<class-name>com.sun.security.auth.callback.TextCallbackHandler</class-name>
</callback-handler>
</security-config>
2. The following is the entry in the Permissions.xml
<?xml version='1.0'?>
<permissions>
<grant>
<principal>
<class>javax.security.auth.x500.X500Principal</class>
<name>CN=admin,OU=Coherence,O=Oracle,C=US</name>
</principal>
<permission>
<target>*</target>
<action>all</action>
</permission>
</grant>
</permissions>
3. The following is the content of the Login configuration file "Coherence_Login.conf"
Coherence {
com.tangosol.security.KeystoreLogin required
keyStorePath="keystore.jks";
4. The following is the command line tag for starting the server
java -server -showversion -Djava.security.auth.login.config=Coherence_Login.conf -Xms%memory% -Xmx%memory% -Dtangosol.coherence.cacheconfig=PROXY-cache-config.xml -Dtangosol.coherence.override=FOL-coherence-override.xml -Dcom.sun.management.jmxremote.port=6789 -Dcom.sun.management.jmxremote.authenticate=false -Dtangosol.coherence.security=true -cp "%coherence_home%\lib\coherence.jar" com.tangosol.net.DefaultCacheServer %1
Following is the output on the Console when running the command. It asks for a username and password for the JKS store (If i provide the wrong password, it gives a different error, which shows that it is able to authenticate aganst the Keystore). After i put in the password, it throws the error as shown below "java.security.AccessControlException: Unsufficient rights to perform the operation"
D:\Coherence\FOL_CacheServer>fol-cache-server
java version "1.6.0_20"
Java(TM) SE Runtime Environment (build 1.6.0_20-b02)
Java HotSpot(TM) 64-Bit Server VM (build 16.3-b01, mixed mode)
Username:admin
Password:
Exception in thread "main" java.security.AccessControlException: Unsufficient ri
ghts to perform the operation
at com.tangosol.net.security.DefaultController.checkPermission(DefaultCo
ntroller.java:153)
at com.tangosol.coherence.component.net.security.Standard.checkPermissio
n(Standard.CDB:32)
at com.tangosol.coherence.component.net.Security.checkPermission(Securit
y.CDB:11)
at com.tangosol.coherence.component.util.SafeCluster.ensureService(SafeC
luster.CDB:6)
at com.tangosol.coherence.component.net.management.Connector.startServic
e(Connector.CDB:20)
at com.tangosol.coherence.component.net.management.gateway.Remote.regist
erLocalModel(Remote.CDB:10)
at com.tangosol.coherence.component.net.management.gateway.Local.registe
rLocalModel(Local.CDB:10)
at com.tangosol.coherence.component.net.management.Gateway.register(Gate
way.CDB:6)
at com.tangosol.coherence.component.util.SafeCluster.ensureRunningCluste
r(SafeCluster.CDB:46)
at com.tangosol.coherence.component.util.SafeCluster.start(SafeCluster.C
DB:2)
at com.tangosol.net.CacheFactory.ensureCluster(CacheFactory.java:998)
at com.tangosol.net.DefaultConfigurableCacheFactory.ensureServiceInterna
l(DefaultConfigurableCacheFactory.java:923)
at com.tangosol.net.DefaultConfigurableCacheFactory.ensureService(Defaul
tConfigurableCacheFactory.java:892)
at com.tangosol.net.DefaultCacheServer.startServices(DefaultCacheServer.
java:81)
at com.tangosol.net.DefaultCacheServer.intialStartServices(DefaultCacheS
erver.java:250)
at com.tangosol.net.DefaultCacheServer.startAndMonitor(DefaultCacheServe
r.java:55)
at com.tangosol.net.DefaultCacheServer.main(DefaultCacheServer.java:197)Did you create the weblogic domain with the Oracle Webcenter Spaces option selected? This should install the relevant libraries into the domain that you will need to deploy your application. My experience is based off WC 11.1.1.0. If you haven't, you can extend your domain by re-running the Domain Config Wizard again (WLS_HOME/common/bin/config.sh)
Cappa
Maybe you are looking for
-
I checked the FCP forum and there seems to be a facility with that app to import an EDL (edit decision list) from the File menu, but this doesn't seem to be an option with FCE. Any workaround suggestions appreciated. I have a project I've been workin
-
Stuck in a Rut trying to activate a Dialog from a menu item
I am building an application using Netbeans. I am stuck on getting a dialog window to open when i select a menu item. I have tried numerous alternatives and still can not seem to get it to work. I am sure it is a simple one; except, I am starting to
-
FBZP transfers to different banks with 1 payment method
Hi Experts, I have the following requirement in society, we have several payment method for do the electronic transfers for each bank: Payment method Bank T Bank transfer X V
-
Can I maintain multiple locations for EP (External Procurement)
I want that the material should be received in repair atorage location as per repairs requirement. But when I run MRP the material reservation is created for repairs storage location to get material from main storage location and a purchase requisiti
-
Different balances showing in FSV & GL Balance.
Dear Gurus, When i am comparing the GL a/c balances with Balance Sheet report, it showing difference. Sundry Debtors: 109,858,885.45-- as per FSV 109,989,057.92-- as per Fbl3n Y it showing like this. Thanx in advance. Regards, Ven