Access Control Vendor Comparison

Hello... I'm in the process of evaluating different proposals for an access control system for our City Hall facility. We have proposals from four vendors that propose three different systems. Just reaching out for feedback from others who might be using one of these systems to see how you like it, reliability, any pitfalls, etc. We are going to be a pretty basic setup here - just exterior entrances and a few secondary internal doors. Any feedback from real experience with any of these systems would be appreciated:InfiniasPaxtonRS2 Technologies
This topic first appeared in the Spiceworks Community

Hi friend,
ACS is entirely different from clean access server. Refer the below url for details.
http://www.cisco.com/en/US/products/ps6128/products_qanda_item0900aecd803be813.shtml
If it helps, please rate or answer another question.
Regards,
Rafael Lanna

Similar Messages

Accessing Control in Excel Worksheet

My company has a Winforms App written in VB.Net that populates textboxes in a Excel 2010 Worksheet. This application has been working flawlessly since the days of Office 2003. Last week, several updates for Office and Excel were pushed out by Microsoft and
my user community installed them. Since then, when our Winforms App attempts to populate the textboxes, the following kind of error occurs:
"Public member 'txtVENDOR_NOTE' on type 'Worksheet' not found."
I have verified that the text boxes exist in the worksheets and I have recreated the worksheets in Excel 2010, but the problems continues to persist. I have uninstalled all the Excel updates as well as several of the Office updates, but the issue still continues.
Has anyone else experienced this issue recently and, if so, how did you resolve it? Since this issue began after the last batch of Office and Excel updates were pushed out by Microsoft, which we installed on December 12th, does anyone know what update might
have caused the above problem?
Thanks in advance for your help.

Dear All,
The following updates blocked our Winforms VB.Net App from accessing controls in Excel:
Security Update for Microsoft Office 2010
KB2553154
KB2553284
KB2687423
KB2850016
Uninstalling these updates resolved our problems and allowed us to continue with our business and interactions with our customers and vendors.
The purpose of these security updates follows:
"A security vulnerability exists in Microsoft office 2012 64-Bit Edition that could allow arbitrary code to run when a maliciously modified file is opened. This update resolves that vulnerability."
These updates need to be installed with caution.
Regards!

Display MAC (media access control) address of connected access point.

Hi all! Sorry if this is already posted somewhere but I tried searching and was having difficulty because of the word MAC having multiple meanings here.
Anyways I want to be able to view the MAC (media access control) address of the access point I am connected to. Is this possible? I can't find it in System Preferences. Is there a terminal command that would allow me to see it? Any help would be MUCH appreciated. Thanks!

I'm looking at it right now. In the top portion, next to the active graph, it has the SSID of my access point. In the table beneath that, my access point is the first on the list, and the MAC address is clearly visible.
Second if I click on my access point in the list, the MAC address appears, temporarily at the bottom of the window.
For comparison, in the iStumbler preferences, on the AirPort tab, I have only "Auto-Select Best Network" & "Keep on Top" selected.

Access "controls" or buttons on a LabVIEW VI with DLL

Hello Experts,
I have a LabVIEW GUI executable file and need to access "control" or buttons on it via another programming lanuguage (Visual Basic .NET) say if the user presses a "EXIT" button on the VB.NET GUI, it goes and clicks the "EXIT" button on the LabVIEW GUI. Is this possible to do using LabVIEW built DLL's ? If not, could you please guide me to the right apprach ?
Thank you very much for your time !

Yes, the front panel comes up after my calling but I am not able to access any "controls" or buttons on it. However, if now (after calling) I manually click on this front panel, it works but I want my VB.NET code to be able to do that.
Our vendor owns the source code and they only provide the executable file to be able to communicate to their mechanical system. We, as a OEM, integrate their mechanical system into our system and provide our end customers with the VB code that controls the entire system.

Error GRC Access Control 10.0

We have a problem when execute the next steps in GRC Access Control 10.0
SPRO-->Governance, Risk and Compliance>Access Control--> Access Risk Analysis--> Batch RisK Analysis
We applied the next note, but problem is the same.
1563583 - SYSTEM_NO_TASK_STORAGE dump on AIX
Category
ABAP Programming Error
Runtime Errors
ASSERTION_FAILED
ABAP Program
CL_GRRM_DASHBOARD_MENU_AUTH===CP
Application Component GRC-RM
Date and Time
13.03.2013 11:50:04
|Short text
|
|
The ASSERT condition was violated.
|
|What happened?
|
|
In the running application program, the ASSERT statement recognized a
|
|
situation that should not have occurred.
|
|
The runtime error was triggered for one of these reasons:
|
|
- For the checkpoint group specified with the ASSERT statement, the
|
|
activation mode is set to "abort".
|
|
- Via a system variant, the activation mode is globally set to "abort"
|
|
for checkpoint groups in this system.
|
|
- The activation mode is set to "abort" on program level.
|
|
- The ASSERT statement is not assigned to any checkpoint group.
|
|What can you do?
|
|
Note down which actions and inputs caused the error.
|
|
|
|
|
|
To process the problem further, contact you SAP system
|
|
administrator.
|
|
|
|
Using Transaction ST22 for ABAP Dump Analysis, you can look
|
|
at and manage termination messages, and you can also
|
|
keep them for a long time.
|
|Error analysis
|
|
The following checkpoint group was used: "No checkpoint group specified"
|
|
|
|
If in the ASSERT statement the addition FIELDS was used, you can find
|
|
the content of the first 8 specified fields in the following overview:
|
|
" (not used) "
|
|
" (not used) "
|
|
" (not used) "
|
|
" (not used) "
|
|
" (not used) "
|
|
" (not used) "
|
|
" (not used) "
|
|
" (not used) "
|
|How to correct the error
|
|
Probably the only way to eliminate the error is to correct the program.
|
|
|
|
|
|
If the error occures in a non-modified SAP program, you may be able to
|
|
find an interim solution in an SAP Note.
|
|
If you have access to SAP Notes, carry out a search with the following
|
|
keywords:
|
|
|
|
"ASSERTION_FAILED" " "
|
|
"CL_GRRM_DASHBOARD_MENU_AUTH===CP" or "CL_GRRM_DASHBOARD_MENU_AUTH===CM001"
|
|
"IF_GRFN_MENU_ITEM_AUTH~IS_AUTHORIZED"
|
|
|
|
If you cannot solve the problem yourself and want to send an error
|
|
notification to SAP, include the following information:
|
|
|
|
1. The description of the current problem (short dump)
|
|
|
|
To save the description, choose "System->List->Save->Local File
|
|
(Unconverted)".
|
|
|
|
2. Corresponding system log
|
|
|
|
Display the system log by calling transaction SM21.
|
|
Restrict the time interval to 10 minutes before and five minutes
|
|
after the short dump. Then choose "System->List->Save->Local File
|
|
(Unconverted)".
|
|
|
|
3. If the problem occurs in a problem of your own or a modified SAP
|
|
program: The source code of the program
|
|
In the editor, choose "Utilities->More
|
|
Utilities->Upload/Download->Download".
|
|
|
|
4. Details about the conditions under which the error occurred or which
|
|
actions and input led to the error.
|
|
|
|
|
|System environment
|
|
SAP Release..... 702
|
|
SAP Basis Level. 0012
|
|
|
|
Application server... "KIO13701"
|
|
Network address...... "172.20.1.137"
|
|
Operating system..... "AIX"
|
|
Release.............. "7.1"
|
|
Hardware type........ "00F6C78E4C00"
|
|
Character length.... 16 Bits
|
|
Pointer length....... 64 Bits
|
|
Work process number.. 10
|
|
Shortdump setting.... "full"
|
|
|
|
Database server... "KIO13701"
|
|
Database type..... "DB6"
|
|
Database name..... "DGR"
|
|
Database user ID.. "SAPDGR"
|
|
|
|
Terminal.......... "192.168.0.5"
|
|
|
|
Char.set.... "C"
|
|
|
|
SAP kernel....... 720
|
|
created (date)... "Jul 8 2012 19:43:01"
|
|
create on........ "AIX 2 5 00092901D600"
|
|
Database version. "DB6_81 "
|
|
|
|
Patch level. 300
|
|
Patch text.. " "
|
|
|
|
Database............. "DB6 08.02.*, DB6 09.*, DB6 10.*"
|
|
SAP database version. 720
|
|
Operating system..... "AIX 2 5, AIX 3 5, AIX 1 6, AIX 1 7"
|
|
|
|
Memory consumption
|
|
Roll.... 0
|
|
EM...... 8379584
|
|
Heap.... 0
|
|
Page.... 16384
|
|
MM Used. 6205712
|
|
MM Free. 2170976
|
|User and Transaction
|
|
Client.............. 100
|
|
User................ "LVELASCO"
|
|
Language key........ "E"
|
|
Transaction......... " "
|
|
Transaction ID...... "51400164B1F00C40E1008000AC140189"
|
|
|
|
EPP Whole Context ID.... "5140015EB1F00C40E1008000AC140189"
|
|
EPP Connection ID....... "5140F9B0B19C1150E1008000AC140189"
|
|
EPP Caller Counter...... 1
|
|
|
|
Program............. "CL_GRRM_DASHBOARD_MENU_AUTH===CP"
|
|
Screen.............. "SAPMHTTP 0010"
|
|
Screen Line......... 2
|
|
Debugger Active..... "none"
|
|Server-Side Connection Information
|
|
Information on Caller of "HTTPS" Connection:
|
|
Plug-in Type.......... "HTTPS"
|
|
Caller IP............. "192.168.0.5"
|
|
Caller Port........... 44300
|
|
Universal Resource ID. "/sap/bc/webdynpro/sap/grfn_service_map"
|
|
|
|
Program............. "CL_GRRM_DASHBOARD_MENU_AUTH===CP"
|
|
Screen.............. "SAPMHTTP 0010"
|
|
Screen Line......... 2
|
|
|
|
Information on Caller ofr "HTTPS" Connection:
|
|
Plug-in Type.......... "HTTPS"
|
|
Caller IP............. "192.168.0.5"
|
|
Caller Port........... 44300
|
|
Universal Resource Id. "/sap/bc/webdynpro/sap/grfn_service_map"
|
|Information on where terminated
|
|
Termination occurred in the ABAP program "CL_GRRM_DASHBOARD_MENU_AUTH===CP" -
|
|
in "IF_GRFN_MENU_ITEM_AUTH~IS_AUTHORIZED".
|
|
The main program was "SAPMHTTP ".
|
|
|
|
In the source code you have the termination point in line 59
|
|
of the (Include) program "CL_GRRM_DASHBOARD_MENU_AUTH===CM001".
|
|Source Code Extract (Source code has changed)
|
|Line |SourceCde
|
|   29|
lv_dashboard = lv_value.
|
|   30|
|
|   31|
TRANSLATE lv_dashboard TO UPPER CASE.
|
|   32|
|
|   33|
CASE lv_dashboard.
|
|   34|
WHEN 'HEATMAP'.
|
|   35|
lv_report = 'GRRM_HEATMAP'.
|
|   36|
|
|   37|
WHEN 'LOSS_OVERVIEW' OR 'LOSS_STRUCTURE' OR 'OB_LOSS_OVERVIEW' OR 'OB_LOSS_STRUCTU|
|   38|
lv_report = 'GRRM_LOSS_ANALYSIS'.
|
|   39|
|
|   40|
WHEN 'OVERVIEW'.
|
|   41|
lv_report = 'GRRM_OVERVIEW'.
|
|   42|
|
|   43|
WHEN OTHERS.
|
|   44|
ASSERT 1 = 2.
|
|   45|
|
|   46|
ENDCASE.
|
|   47|
|
|   48|
EXIT.
|
|   49|
|
|   50|
ENDLOOP.
|
|   51|
|
|   52|
WHEN 'GRRM_LOSS_MATRIX' OR 'GRRM_LOSS_MATRIX_NEW'.
|
|   53|
lv_report = 'GRRM_LOSS_ANALYSIS'.
|
|   54|
|
|   55|
WHEN 'GRRM_HEATMAP_REPORT'.
|
|   56|
lv_report = 'GRRM_HEATMAP'.
|
|   57|
|
|   58|
WHEN OTHERS.
|
|>>>>>|
ASSERT 1 = 2.
|
|   60|
|
|   61| ENDCASE.
|
|   62|
|
|   63| TRY.
|
|   64|
lv_regulation_id = cl_grfn_api_regulation=>if_grfn_api_regulation~get_regulation_id( i|
|   65|
|
|   66|
ev_authorized = cl_grfn_util_rep_auth=>has_rep_auth(
|
|   67|
io_session
= io_session
|
|   68|
iv_regulation_id = lv_regulation_id
|
|   69|
iv_report
= lv_report
|
|   70|
iv_activity
= grfn0_c_activity-print
|
|   71|
|
|   72|
|
|   73|
CATCH cx_grfn_exception.
|
|   74|
ev_authorized = abap_false.
|
|   75|
|
|   76| ENDTRY.
|
|   77|
|
|   78|ENDMETHOD.
|
|Contents of system fields
|
|Name
|Val.
|
|SY-SUBRC|4
|
|SY-INDEX|2
|
|SY-TABIX|1
|
|SY-DBCNT|1
|
|SY-FDPOS|0
|
|SY-LSIND|0
|
|SY-PAGNO|0
|
|SY-LINNO|1
|
|SY-COLNO|1
|
|SY-PFKEY|
|
|SY-UCOMM|
|
|SY-TITLE|HTTP Control
|
|SY-MSGTY|
|
|SY-MSGID|
|
|SY-MSGNO|000
|
|SY-MSGV1|
|
|SY-MSGV2|
|
|SY-MSGV3|
|
|SY-MSGV4|
|
|SY-MODNO|0
|
|SY-DATUM|20130313
|
|SY-UZEIT|115004
|
|SY-XPROG|SAPCNVE
|
|SY-XFORM|CONVERSION_EXIT
|
|Active Calls/Events
|
|No.   Ty.
Program
Include
Line   |
|
Name
|
|   34 METHOD
CL_GRRM_DASHBOARD_MENU_AUTH===CP
CL_GRRM_DASHBOARD_MENU_AUTH===CM001
59 |
|
CL_GRRM_DASHBOARD_MENU_AUTH=>IF_GRFN_MENU_ITEM_AUTH~IS_AUTHORIZED
|
|   33 METHOD
CL_GRFN_API_MENU_ITEM_ELA=====CP
CL_GRFN_API_MENU_ITEM_ELA=====CM001   126 |
|
CL_GRFN_API_MENU_ITEM_ELA=>IF_GRFN_MENU_AUTH~ITEM_AUTH
|
|   32 METHOD
CL_GRFN_API_MENU==============CP
CL_GRFN_API_MENU==============CM003
34 |
|
CL_GRFN_API_MENU=>IF_GRFN_MENU_AUTH~ITEM_AUTH
|
|   31 METHOD
CL_GRFN_LAUNCHPAD_UIBB========CP
CL_GRFN_LAUNCHPAD_UIBB========CM006
60 |
|
CL_GRFN_LAUNCHPAD_UIBB=>IF_FPM_GUIBB_LAUNCHPAD~MODIFY
|
|   30 METHOD
CL_FPM_LAUNCHPAD_UIBB_ASSIST==CP
CL_FPM_LAUNCHPAD_UIBB_ASSIST==CM001
76 |
|
CL_FPM_LAUNCHPAD_UIBB_ASSIST=>INIT_FEEDER
|
|   29 METHOD
/1BCWDY/T2POSMRSKMLY9L6LJP5Z==CP
/1BCWDY/B_T2POSBAR6C8HPR0XTR4P
410 |
|
CL_COMPONENTCONTROLLER_CTR=>WDDOINIT
|
|
Web Dynpro Component
FPM_LAUNCHPAD_UIBB
|
|
Controller
COMPONENTCONTROLLER
|
|   28 METHOD
/1BCWDY/T2POSMRSKMLY9L6LJP5Z==CP
/1BCWDY/B_T2POSBAR6C8HPR0XTR4P
181 |
|
CLF_COMPONENTCONTROLLER_CTR=>IF_WDR_COMPONENT_DELEGATE~WD_DO_INIT
|
|
Web Dynpro Component
FPM_LAUNCHPAD_UIBB
|
|
Controller
COMPONENTCONTROLLER
|
|   27 METHOD
CL_WDR_DELEGATING_COMPONENT===CP
CL_WDR_DELEGATING_COMPONENT===CM004
9 |
|
CL_WDR_DELEGATING_COMPONENT=>DO_INIT
|
|   26 METHOD
CL_WDR_CONTROLLER=============CP
CL_WDR_CONTROLLER=============CM00V
3 |
|
CL_WDR_CONTROLLER=>INIT_CONTROLLER
|
|   25 METHOD
CL_WDR_COMPONENT==============CP
CL_WDR_COMPONENT==============CM019
24 |
|
CL_WDR_COMPONENT=>INIT_CONTROLLER
|
|   24 METHOD
CL_WDR_CONTROLLER=============CP
CL_WDR_CONTROLLER=============CM002
7 |
|
CL_WDR_CONTROLLER=>INIT
|
|   23 METHOD
CL_WDR_CLIENT_COMPONENT=======CP
CL_WDR_CLIENT_COMPONENT=======CM00E
24 |
|
CL_WDR_CLIENT_COMPONENT=>INIT
|
|   22 METHOD
CL_WDR_CLIENT_COMPONENT=======CP
CL_WDR_CLIENT_COMPONENT=======CM00A
42 |
|
CL_WDR_CLIENT_COMPONENT=>IF_WDR_COMPONENT_FACTORY~CREATE_COMPONENT
|
|   21 METHOD
CL_WDR_COMPONENT_USAGE========CP
CL_WDR_COMPONENT_USAGE========CM009
67 |
|
CL_WDR_COMPONENT_USAGE=>IF_WD_COMPONENT_USAGE~CREATE_COMPONENT
|
|   20 METHOD
CL_FPM_COMPONENT_MANAGER======CP
CL_FPM_COMPONENT_MANAGER======CM003
81 |
|
CL_FPM_COMPONENT_MANAGER=>ADD_COMPONENT
|
|   19 METHOD
CL_FPM_COMPONENT_MANAGER======CP
CL_FPM_COMPONENT_MANAGER======CM004
19 |
|
CL_FPM_COMPONENT_MANAGER=>ATTACH_COMPONENT_TO_USAGE
|
|   18 METHOD
CL_FPM========================CP
CL_FPM========================CM005
89 |
|
CL_FPM=>PROCESS_EVENT
|
|   17 METHOD
CL_FPM========================CP
CL_FPM========================CM00C
34 |
|
CL_FPM=>RUN_EVENT_LOOP
|
|   16 METHOD
CL_FPM========================CP
CL_FPM========================CM002
5 |
|
CL_FPM=>IF_FPM~RAISE_EVENT
|
|   15 METHOD
CL_FPM========================CP
CL_FPM========================CM003
11 |
|

Hi Alberto,
The below Notes should resolve!
1428775
1744179
Hope this helps,
Luciana

How to allow multiple domains under Access-Control-Allow-Origin

Hi,
We have a domain where will get CORS request from another domain hosted on seperate DC. We can't set
Access-Control-Allow-Origin as * due to security concerns & IIS can't take more than 1 value at a time. Kindly suggest how to pass multiple httpheader for
Access-Control-Allow-Origin.
Regards,
Dhiraj

Hello Dhiraj,
This is not the suitable forum for your question, you may post in
IIS forums for more help.
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

WRT 120 Internet Access Control Problem for itouch

I've just set up my router. Cannot seem to control access to the internet for my son's itouch. The router recognizes it on the map as a wireless device part of the network, but it will not show up in the menu that allows for internet access control. My lap top shows up, but no itouch. I'm running Windows XP home premium edition - not sure if this makes a difference.

Open the linksys setup page...Under the Wireless tab,Change the Channel Width to 20MHz only,Channel to 11 and click on save settings...Under the Advanced Wireless Settings,Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...
On the I-Touch..Go to Settings>>>General>>>Reset>>>Now select Reset Network Settings.This will now reboot and restore you network connections.

Time Capsule Access Control and Extended Network Question

I have a Time Capsule where I have set up a wireless network access list…and extended the network using an Airport Express unit. The Airport Express unit also has settings for an Access Control list. Do these need to be the same as the those for the network from TC that it is extending…or does that happen automatically…and if not what on earth are they for?
Thanks for any help…this doesn't seem clear from what I've read/seen.
James

I have a Time Capsule where I have set up a wireless network access list…and extended the network using an Airport Express unit. The Airport Express unit also has settings for an Access Control list. Do these need to be the same as the those for the network from TC that it is extending…or does that happen automatically…and if not what on earth are they for?
Unfortunately, they are not automatically applied to each base station in an extended network. You would have to manually enter the exact same list in each base station.

How do I set up timed access control for a time past midnight

I would like to set up timed access control for a number of my devices that would stretch past midnight... An open network from 6AM to 2AM - effectively only blocking access from 2AM tp 6AM in the morning....
Any notion on how to do this? the timed factily does not like the setting to enable 6A to 2A, says the times are invalid.
Setting up timed access from 6AM to 11:59P, then doing another from 12A to 2A causes a service "hiccup" of 1 Minute.

Set up each device as follows:
Everyday........Between.......6:00 AM and 11:59 PM
Add a second rule for each device that will state....
Everyday.....Between.......12:00 AM and 2:00 AM
You might think that there would be a one minute break between 11:59 PM and 12:00 AM, but that will not be the case, at least on every AirPort that I have ever programmed.. Reason.....11:59 is really 11:59:59:59 turning off at 12:00 AM. But, you have a second rule to allow access at 12:00 AM, so the AirPort will be "on" at the same time the first rule ends, so there will be no break.
If you really want the second rule to turn the AirPort "off" at 2:00 AM.......then set that time for 1:59 AM. If you set the rule for 2:00 AM, then AirPort will really turn off at 2:01 AM.

To run OHS at port 80 using solaris role based access control

Hi.
I already know & have done setuid root to ohs/bin/.apachectl to allow ohs to listen to port 80. Now on a new OFM 11.1.1.4 install, I want to use Solaris Role Based Access Control (RBAC) instead. Is it possible? RBAC does work as I can run a home built apache2 httpd at port 80 withOUT suid root.
On Solaris 10, I enabled oracle uid to run process below port 1024 using RBAC
/etc/user_attr:
oracle::::type=normal;defaultpriv=basic,net_privaddr
Change OHS httpd.conf Listen from port 8888 to port 80.
However, opmnctl startproc process-type=OHS
failed as below with nothing showing in the diag logs:
opmnctl startproc: starting opmn managed processes...
================================================================================
opmn id=truffle:6701
0 of 1 processes started.
ias-instance id=asinst_1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
ohs1/OHS/OHS/
Error
--> Process (index=1,uid=187636255,pid=25563)
failed to start a managed process after the maximum retry limit
Thx,
Ken

Just to add my two cents here.
The commando used on Solaris to assign the right privilege to bind TCP ports < 1024 is:
# usermod -K defaultpriv=basic,*net_privaddr* <your_user_name>
Restart the opmnctl daemond.
After that OHS/Apache user can bind to lower TCP ports.
Regards.
Edited by: Tuelho on Oct 9, 2012 6:05 AM

SharePoint Provider Hosted App (401) Unauthorized Microsoft.SharePoint.SPException: The Azure Access Control service is unavailable

Hello,
I'm attempting to get a SharePoint 2013 Provider Hosted Application working in a brand new SharePoint environment. I've created snapshots of both my dev and the sharepoint environments along the way and have meticulously documented every step of the
way. I've followed these instructions (among many other resources found along this journey) :
http://msdn.microsoft.com/en-us/library/fp179923(office.15).aspx
http://technet.microsoft.com/en-us/library/fp161236(office.15).aspx
http://msdn.microsoft.com/library/office/fp179901%28v=office.15%29
Upon package and publish of my application to SharePoint, I get a 401 Unauthorized error. I use Fiddler to obtain the SPErrorCorrelationID to ultimately obtain the following ULS Viewer Output. Please explain how to fix if you're able.
Please Note: I was under the impression that a Provider Hosted Application does not use the Azure Access Control service, so I'm confused as to why my system is attempting to make this connection?
Also Note: I've used a self signed and godday obtained certificate to successfully f5 debug my basic web.title (out of the visual studio 2012 box) sharepoint provider hosted application... so I know my certs are good.
Here's my ULS output:
03/24/2014 08:54:47.83   w3wp.exe (0x1448)   0x22D8   SharePoint Foundation   Logging Correlation Data   xmnv   Medium   Name=Request (GET:http://portal.cltenet.com/_layouts/15/appredirect.aspx?instance_id=22d5252f%2D392c%2D4f68%2Db820%2Da3053b9d4f24)
306c809c-66a1-d0d5-d8e2-89d3631ce1bf
03/24/2014 08:54:47.83   w3wp.exe (0x1448)   0x22D8   SharePoint Foundation   Authentication Authorization   agb9s   Medium   Non-OAuth request.
IsAuthenticated=True, UserIdentityName=0#.w|cltenet\sp.apps, ClaimsCount=25   306c809c-66a1-d0d5-d8e2-89d3631ce1bf
03/24/2014 08:54:47.83   w3wp.exe (0x1448)   0x22D8   SharePoint Foundation   Logging Correlation Data   xmnv   Medium   Site=/   306c809c-66a1-d0d5-d8e2-89d3631ce1bf
03/24/2014 08:54:47.84   w3wp.exe (0x1448)   0x22D8   SharePoint Foundation   App Deployment   acjjg   Medium   The current user has System.Threading.Thread.CurrentPrincipal.Identity.Name
= 0#.w|cltenet\sp.apps, System.Security.Principal.WindowsIdentity.GetCurrent().Name = NT AUTHORITY\IUSR, System.Web.HttpContext.Current.User.Identity.Name = 0#.w|cltenet\sp.apps.   306c809c-66a1-d0d5-d8e2-89d3631ce1bf
03/24/2014 08:54:47.84   w3wp.exe (0x1448)   0x22D8   SharePoint Foundation   App Auth   ajsrv   Medium   redirectLaunUrl after getting it from query
string, web or app instance: https://hightrust31.cltenetapps.com/Pages/Default.aspx?{StandardTokens}   306c809c-66a1-d0d5-d8e2-89d3631ce1bf
03/24/2014 08:54:47.85   w3wp.exe (0x1448)   0x22D8   SharePoint Foundation   General   aib0n   High   trying to get app tokens for site: 888b71f7-51ee-40f5-8344-8de4869d37d0
Unable to load app tokens from appInstanceId: 22d5252f-392c-4f68-b820-a3053b9d4f24   306c809c-66a1-d0d5-d8e2-89d3631ce1bf
03/24/2014 08:54:47.85   w3wp.exe (0x1448)   0x22D8   SharePoint Foundation   App Auth   ajsrw   Medium   redirectLaunUrl after getting token replacement:
https://hightrust31.cltenetapps.com/Pages/Default.aspx?SPHostUrl=http%3A%2F%2Fportal%2Ecltenet%2Ecom&SPLanguage=en%2DUS&SPClientTag=0&SPProductNumber=15%2E0%2E4420%2E1017   306c809c-66a1-d0d5-d8e2-89d3631ce1bf
03/24/2014 08:54:47.85   w3wp.exe (0x1448)   0x22D8   SharePoint Foundation   App Auth   ajsry   Medium   m_oauthAppId after NormalizeAppIdentifier()
i:0i.t|ms.sp.ext|[email protected]8df36d5d. Now getting app principal info.   306c809c-66a1-d0d5-d8e2-89d3631ce1bf
03/24/2014 08:54:47.85   w3wp.exe (0x1448)   0x22D8   SharePoint Foundation   App Auth   ajsr0   Medium   decided that we need to do a POST to the
app.   306c809c-66a1-d0d5-d8e2-89d3631ce1bf
03/24/2014 08:54:47.85   w3wp.exe (0x1448)   0x22D8   SharePoint Foundation   App Auth   ajsr1   Medium   m_redirectMessage: EndpointAuthorityMatches
306c809c-66a1-d0d5-d8e2-89d3631ce1bf
03/24/2014 08:54:47.85   w3wp.exe (0x1448)   0x22D8   SharePoint Foundation   App Auth   ajsr2   Medium   realm matched attempting to get app token
using GetAccessToken()   306c809c-66a1-d0d5-d8e2-89d3631ce1bf
03/24/2014 08:54:47.85   w3wp.exe (0x1448)   0x22D8   SharePoint Foundation   App Auth   advzm   High   Error when get token for app i:0i.t|ms.sp.ext|[email protected]8df36d5d,
exception: Microsoft.SharePoint.SPException: The Azure Access Control service is unavailable.     at Microsoft.SharePoint.ApplicationServices.SPApplicationContext.GetApplicationSecurityTokenServicesUri(SPServiceContext serviceContext)
at Microsoft.SharePoint.ApplicationServices.SPApplicationContext..ctor(SPServiceContext serviceContext, SPIdentityContext userIdentity, OAuth2EndpointIdentity applicationEndPoint)     at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForApplicationContext(SPIdentityContext
userIdentityContext, String applicationId, Uri applicationRealm, SPApplicationContextAccessTokenType applicationTokenType, SPApplicationDelegationConsentType consentValue)     at Microsoft.SharePoint.SPServerToAppServerAccessTokenManager.GetAccessTokenPrivate(SPServiceContext
serviceContext, String appId, Uri appEndpointUrl, SPAppPrincipalInfo appPrincipal, SPApplicationContextAccessTokenType tokenType, Boolean useThreadIdentity, SPUserToken userToken)   306c809c-66a1-d0d5-d8e2-89d3631ce1bf
03/24/2014 08:54:47.85   w3wp.exe (0x1448)   0x22D8   SharePoint Foundation   App Auth   ajsr3   High   App token requested from appredirect.aspx
for site: 888b71f7-51ee-40f5-8344-8de4869d37d0 but there was an error in generating it. This may be a case when we do not need a token or when the app principal was not properly set up. LaunchUrl:https://hightrust31.cltenetapps.com/Pages/Default.aspx?SPHostUrl=http://portal.cltenet.com&SPLanguage=en-US&SPClientTag=0&SPProductNumber=15.0.4420.1017
Exception Message:The Azure Access Control service is unavailable. Stacktrace:    at Microsoft.SharePoint.ApplicationServices.SPApplicationContext.GetApplicationSecurityTokenServicesUri(SPServiceContext serviceContext)
at Microsoft.SharePoint.ApplicationServices.SPApplicationContext..ctor(SPServiceContext serviceContext, SPIdentityContext userIdentity, OAuth2EndpointIdentity applicationEndPoint)     at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForApplicationContext(SPIdentityContext
userIdentityContext, String applicationId, Uri applicationRealm, SPApplicationContextAccessTokenType applicationTokenType, SPApplicationDelegationConsentType consentValue)     at Microsoft.SharePoint.SPServerToAppServerAccessTokenManager.GetAccessTokenPrivate(SPServiceContext
serviceContext, String appId, Uri appEndpointUrl, SPAppPrincipalInfo appPrincipal, SPApplicationContextAccessTokenType tokenType, Boolean useThreadIdentity, SPUserToken userToken)     at Microsoft.SharePoint.SPServerToAppServerAccessTokenManager.GetAccessTokenFromThreadIdentityOrUserToken(SPServiceContext
serviceContext, String appId, Uri appEndpointUrl, SPApplicationContextAccessTokenType tokenType, SPAppPrincipalInfo appPrincipal, Boolean useThreadIdentity, SPUserToken userToken)     at Microsoft.SharePoint.ApplicationPages.AppRedirectPage.ValidateAndProcessRequest().
Since this is a nonfatal error, it will be sanitized and posted to the app as part of the app launch.   306c809c-66a1-d0d5-d8e2-89d3631ce1bf
03/24/2014 08:54:47.85   w3wp.exe (0x1448)   0x22D8   SharePoint Foundation   General   ajlz0   High   Getting Error Message for Exception Microsoft.SharePoint.SPException:
The Azure Access Control service is unavailable.     at Microsoft.SharePoint.ApplicationServices.SPApplicationContext.GetApplicationSecurityTokenServicesUri(SPServiceContext serviceContext)     at Microsoft.SharePoint.ApplicationServices.SPApplicationContext..ctor(SPServiceContext
serviceContext, SPIdentityContext userIdentity, OAuth2EndpointIdentity applicationEndPoint)     at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForApplicationContext(SPIdentityContext userIdentityContext, String applicationId, Uri
applicationRealm, SPApplicationContextAccessTokenType applicationTokenType, SPApplicationDelegationConsentType consentValue)     at Microsoft.SharePoint.SPServerToAppServerAccessTokenManager.GetAccessTokenPrivate(SPServiceContext serviceContext,
String appId, Uri appEndpointUrl, SPAppPrincipalInfo appPrincipal, SPApplicationContextAccessTokenType tokenType, Boolean useThreadIdentity, SPUserToken userToken)     at Microsoft.SharePoint.SPServerToAppServerAccessTokenManager.GetAccessTokenFromThreadIdentityOrUserToken(SPServiceContext
serviceContext, String appId, Uri appEndpointUrl, SPApplicationContextAccessTokenType tokenType, SPAppPrincipalInfo appPrincipal, Boolean useThreadIdentity, SPUserToken userToken)     at Microsoft.SharePoint.ApplicationPages.AppRedirectPage.ValidateAndProcessRequest()
306c809c-66a1-d0d5-d8e2-89d3631ce1bf
03/24/2014 08:54:47.85   w3wp.exe (0x1448)   0x22D8   SharePoint Foundation   App Auth   aib0p   Medium   Doing appredirect from appredirect.aspx:
in site: 888b71f7-51ee-40f5-8344-8de4869d37d0 with RedirectLaunchUrl: https://hightrust31.cltenetapps.com/Pages/Default.aspx?SPHostUrl=http%3A%2F%2Fportal%2Ecltenet%2Ecom&SPLanguage=en%2DUS&SPClientTag=0&SPProductNumber=15%2E0%2E4420%2E1017
306c809c-66a1-d0d5-d8e2-89d3631ce1bf
03/24/2014 08:54:47.85   w3wp.exe (0x1448)   0x22D8   SharePoint Foundation   Monitoring   b4ly   Medium   Leaving Monitored Scope (Request (GET:http://portal.cltenet.com/_layouts/15/appredirect.aspx?instance_id=22d5252f%2D392c%2D4f68%2Db820%2Da3053b9d4f24)).
Execution Time=26.5933938531294   306c809c-66a1-d0d5-d8e2-89d3631ce1bf
Your help is very much appreciated.
With Respect,
Larry

Yes, actually - I was able to resolve it.
However I don't know how, unfortunately. I suspect it was because I needed to have the names of the certificates, defined during the certificate registration (to sharepoint) process, different.
I have a complete document that shows step by step instructions on the exact process I took to complete the provider hosted application creation, deployment and publishing. It was a daunting task, but I finished it successfully.
If there's a way to send private message on this forum, please do so and I'll respond with a way to obtain my document.
NOTE: I'm not all impressed with the way this forum works. This is supposed to be a Microsoft resource and I'll be damned if I ever get a response to highly technical questions. Completely lame. Boooooo Microsoft.

ORA-24247: network access denied by access control list (ACL)error-UTL_HTTP

I am getting following ACL error while executing following procedure:
create or replace procedure sat_proc as
http_req utl_http.req;
http_resp utl_http.resp;
BEGIN
http_req := utl_http.begin_request('www.yahoo.com');
http_resp := utl_http.get_response(http_req);
utl_http.end_response(http_resp);
END;
exec sat_proc;
ORA-29273: HTTP request failed
ORA-06512: at "SYS.UTL_HTTP", line 1130
ORA-24247: network access denied by access control list (ACL)
ORA-06512: at "TRANSDBA.SAT_PROC", line 5
ORA-06512: at line 1
I am able to execute successfully while executing above code as PL/SQL block:
DECLARE
http_req utl_http.req;
http_resp utl_http.resp;
BEGIN
http_req := utl_http.begin_request('www.yahoo.com');
http_resp := utl_http.get_response(http_req);
utl_http.end_response(http_resp);
END;
PL/SQL procedure successfully completed.
Could help me find why I am getting error while executing same code in a procedure? Is there any privilege missing?

GRANT EXECUTE ON SYS.UTL_HTTP TO <your_user>;
SQL> set time on
17:21:01 SQL> set role none;
Role set.
17:21:23 SQL> @utl_http.sql
17:21:34 SQL> DECLARE
17:21:34   2 http_req utl_http.req;
17:21:34   3 http_resp utl_http.resp;
17:21:34   4 BEGIN
17:21:34   5 http_req := utl_http.begin_request('www.yahoo.com');
17:21:34   6 http_resp := utl_http.get_response(http_req);
17:21:34   7 utl_http.end_response(http_resp);
17:21:34   8 END;
17:21:34   9 /
PL/SQL procedure successfully completed.
17:21:35 SQL> connect / as sysdba
Connected.
17:22:47 SQL> connect dbadmin/admindb
Connected.
17:23:06 SQL> @utl_http.sql
17:23:22 SQL> DECLARE
17:23:22   2 http_req utl_http.req;
17:23:22   3 http_resp utl_http.resp;
17:23:22   4 BEGIN
17:23:22   5 http_req := utl_http.begin_request('www.yahoo.com');
17:23:22   6 http_resp := utl_http.get_response(http_req);
17:23:22   7 utl_http.end_response(http_resp);
17:23:22   8 END;
17:23:22   9 /
PL/SQL procedure successfully completed.
17:23:23 SQL> set role none;
Role set.
17:23:29 SQL> @utl_http.sql
17:23:31 SQL> DECLARE
17:23:31   2 http_req utl_http.req;
17:23:31   3 http_resp utl_http.resp;
17:23:31   4 BEGIN
17:23:31   5 http_req := utl_http.begin_request('www.yahoo.com');
17:23:31   6 http_resp := utl_http.get_response(http_req);
17:23:31   7 utl_http.end_response(http_resp);
17:23:31   8 END;
17:23:31   9 /
DECLARE
ERROR at line 1:
ORA-29273: HTTP request failed
ORA-06512: at "SYS.UTL_HTTP", line 1130
ORA-24247: network access denied by access control list (ACL)
ORA-06512: at line 5
17:23:31 SQL> above is from test user
Below is from SYSDBA account
SQL> set time on
17:20:53 SQL> revoke execute on sys.utl_http to dbadmin;
revoke execute on sys.utl_http to dbadmin
ERROR at line 1:
ORA-00905: missing keyword
17:22:03 SQL> revoke execute on sys.utl_http from dbadmin;
revoke execute on sys.utl_http from dbadmin
ERROR at line 1:
ORA-04020: deadlock detected while trying to lock object
ACLiLZU+w09hR7gQAB/AQAjcw==
17:22:32 SQL> /
Revoke succeeded.
17:22:52 SQL> Edited by: sb92075 on Jun 10, 2010 5:24 PM

After trying to set up access control, my Airport Utility is no longer able to find my Base Station. My PC still sees my wireless network but I can't connect to it.

A friend told me he was able to access my network from a different device with no password so I decided to set up an access control. Following the prompts, I entered my IP address, and then my Airport stopped working. I tried uninstalling it and reinstalling it, but got the same thing. The screen I get is that "Airport Utility was unable to find any Airport wireless devices", and askes me if I want to rescan. When I rescan I get the same message. My Airport light is green and my PC recognizes the network, my software just can't connect to it. A friend suggested I entered the wrong IP address (which I found on my computer under "connections", but even after I tried a different one which is supposed to be from the network, I still get the same error message. What am I doing wrong?

A friend told me he was able to access my network from a different device with no password so I decided to set up an access control.
This could be bullsh!t on your friend's part perhaps? Do you ever recall seeing a blue-light on the base station?
Following the prompts, I entered my IP address, and then my Airport stopped working.
The acces control list is where you put in your Mac Address, this is not the same thing as an IP.

Access Control Lists on USB drive connected to AirPort Extreme

I have a Seagate 320GB drive mounted in a NexStar 2 IDE drive enclosure and connected via USB to my AirPort Extreme Base Station, running version 7.4.1 firmware upgrade.
Every time I restart the computer or unmount the network drive, an access control list appears to be written to the drive when there should be none, according to Disk Utility. I can tell when there are problems with the drive because the desktop icon turns from bright blue to grey-blue. I have to unmount the drive from the base station and connect it directly to the computer via firewire in order for Disk Utility to examine it. Generally, Disk Utility will report "Incorrect number of Access Control Lists (It should be 0 instead of (whatever number found) )
Does anyone know why these Access Control Lists are appearing? Is there any easy way to locate them and remove them, other than disconnecting it from the base station and connecting to the computer?
This problem happens with several different drives, in various NexStar 2 and NexStar 3 enclosures.

Same problem for me, exept that it happends after copying a file to the drive. It don't happend if I just mount and unmount the disc. The same for all discs I have tryed.
2009-03-04 12:59:30 +0100: Disk Utility started.
2009-03-04 12:59:43 +0100: Verifying volume “UltramaxB”
Starting verification tool: 2009-03-04 12:59:43 +0100
2009-03-04 12:59:43 +0100: Checking Journaled HFS Plus volume.
2009-03-04 12:59:43 +0100: Checking Extents Overflow file.
2009-03-04 12:59:43 +0100: Checking Catalog file.
2009-03-04 12:59:43 +0100: Checking multi-linked files.
2009-03-04 12:59:43 +0100: Checking Catalog hierarchy.
2009-03-04 12:59:43 +0100: Checking Extended Attributes file.
2009-03-04 12:59:43 +0100: Incorrect number of Access Control Lists
2009-03-04 12:59:43 +0100: 2009-03-04 12:59:43 +0100: 2009-03-04 12:59:43 +0100: (It should be 5427 instead of 5430)
2009-03-04 12:59:43 +0100: Checking volume bitmap.
2009-03-04 12:59:44 +0100: Checking volume information.
2009-03-04 12:59:44 +0100: 2009-03-04 12:59:44 +0100: The volume UltramaxB needs to be repaired.
2009-03-04 12:59:44 +0100: Error: Filesystem verify or repair failed.2009-03-04 12:59:44 +0100:
2009-03-04 12:59:44 +0100: Disk Utility stopped verifying “UltramaxB” because the following error was encountered:
Filesystem verify or repair failed.
2009-03-04 12:59:44 +0100:

Access Control up grade from 5.2 to 5.3

Hi,
One of my client have
1. Earlier Access control 5.2 was installed but only FF are configured and is in use.
2. After some time Access Control GRC 5.2 server (front end) have some problem so they have
installed 5.3 to front end level
--no back end patch was updated
--no connector are created.
Now the situation is as follows
Front end -access control 5.3 -
Back end -RTA is access control 5.2(they are only using FF)
No connector are created
From this situation how can we take it forward to access control 5.3.
I have following question
1. can we update back end to 5.3 and start configuration --what is the impact?
2. Do we need to take back up of table FF as client is using only FF.
Thanks,
Digambar

Hi
5.2 RTA will not be compatible with with GRC 5.3 RTA .
So best would ne to upgrade your backend RTA to 5.3 and SP level shoul;d be in Synch with level of SP of front end i.e SA P GRC 5.3 .
Thanks & Regards
Asheesh

Access Control Vendor Comparison

Similar Messages

Maybe you are looking for