Access Data from device with Broken Screen

My Storm fell and the screen cracked and now it only displays a black screen. I am able to get it recognized with the Blackberry Destop Software but in order to fully access the device I need to unlock it, which I can't because the screen is broken. What can I do in order to access the documents that are NOTin the media card?

Hi heckstallk
Have you tried backing up your BlackBerry using the BlackBerry Desktop Software? After doing so, I would suggest performing reload of the software as shown in the article below:
KB11320 - How to perform a clean reload of the BlackBerry Device Software using BlackBerry Desktop M...
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Similar Messages

I can capture with iMovie 6, but not with FCP 6.0 ('no data from device')

I didn't have any problem with FCP 5, but am getting nowhere with FCP 6 using the same settings (I think). FCP seems to see the camcorder, but can't control it and, even if I manually start the camera, reports 'no data from device' when I do a 'Capture Now'. Device control isn't critical, but I'd sure like to find out why it doesn't see the data stream from the camera (Sony HDR-HC7 / FW400). I must be missing a setting some place, but sure can't find it. On the other hand, I have full device control and zero dropout capture with iMovie (exact same hardware configuration). Any ideas?

Wolfgang Matzl wrote:
canopus works fine, as well as all other devices.
i have tons of tapes and tried a few, none worked.
i tried to capture on both my new imac and my mbpro, no way.
but now i'm sure there is something wrong with the sony handycam, i tried to import with my old final cut studio, and it's not possible, also. fc pro says: waiting for timecode.
so i'm confused now. does the sony dcr-trv not send a timecode? maybe, and this will explain the troubles. but on the other hand i imported successfully some footage with exact this device.
maybe i used the canopus then to correct the timebase, i can't remember how i did it. but this would mean i have to accept loss of quality, since i have to connect the sony with s-vhs with the canopus and convert it.
right now i'm importing a tape with imovie and will have a look how the result is, but as far as i remember, the audio has to be re-rendered when importing in fcpx…
My finger is pointing to a Timecode issue.
Is timecode enabled in the camera?
Is it continuous on the tape?
Al

I have 3 macs. 2 are Lion, 1 I left Snow leopard so I can access data from my old Quicken Application that doesn't work with Lion. If I move to iCloud, will I no longer be able to access my MobileMe email on the Snow Leopard mac?

I have 3 macs. 2 are Lion, but 1 I left Snow leopard so I can access data from my old Quicken Application that doesn't work with Lion. If I move to iCloud, will I no longer be able to access my MobileMe email on the Snow Leopard mac?

What version of word do you have? The TS3938 sounds like it's a PowerPC app- written for an old architecture that is no longer supported in Lion. If this is the case, your files are fine- you just need a newer version of word that will run in Lion in order to open them. The newest version (2011) should be readily available anywhere, and has worked fine for me ever since I switched to Lion on release day....

How,can,i,recovery,photos,from,phone,5,with,,broken,screen,,in,recovery,mode,and ,has,password

How can i recovery photos from phone 5 with broken screen inrecovery mode and has,password

Hi Tsorbie,
I am sorry to tell you that you cannot recover photos once your iPhone is on recovery mode.
Regards,
J_Kim

How do I access data from one user account to another?

I want to access data from a different user account. How do I make all the files available?

I have another post here in the forum that explains in detail about the rez problem. It was read by a lot of people with no responses. 1 thing that might be important is that I was using a Wacom drawing tablet when this problem started. I removed the Wacom software and no help.
My Apple 23" Cinema display has very large icons but the display prefs says it is at 1920 x 1200. It's not just a low screen rez but the dock and all icons will scroll on the screen when I move the mouse.
The resolution will not change to anything else. The rez is fine on other user names.
I have booted from the Apple DVD and run disk repair, repaired disk permissions. Booted and run Tech Tool.
Booted from the Disk Warrior cd and ran that.
I have zapped the PRAM. I have plugged the display into the other port on the video card.
When I change to the problem user name it is fine for about 1 second and then changes to the "problem". I have never seen this before and I have been using a Mac since 1990.
It's a G-5. Dual 2.0 ghz. 2.5 gb ram. OS 10.5.8. Apple keyboard. Logitech mouse and
Thanks.

APEX Application accessing data from two different databases

Hi All,
Currently as we all know that APEX Application resides in database and is connected to the schema of that database.
I want APEX Application to be running and accessing data from two different databases. Elaborating my question,
Currently, my APEX Production Application is connected with XXXX Schema of DB1 Database(Where APEX Resides). Now I want to add some pages into this APEX Application for REPORT Purpose, But I want to connect this REPORT APEX Pages to get data from Different Schema YYYY for Database DB2.
Is it possible to configure this scenario?
The reason for doing this is to avoid the REPORT related (adhoc queries) resource utilization effect on Production DB1 Database.
Thanks
Nil

1. If you do the joining of two or more tables in DB1 then all data is pulled over to DB1 and then the join is executed: so more data over the databaselink and more work for DB1. Better keep the joining stuff where the data resides and just pull exactly that data over that you need.
2. Don't know about your different block sizes. Seems a nice question for one of the other forums (DBA or SQL).
3. I mean create synonyms on DB1 for reports VIEWS in DB2.
Hope all is clear!

Upload data from excel with vba by calling a function module

Hello all,
i have a problem with the function module "ALSM_EXCEL_TO_INTERNAL_TABLE". I will call this function module with vba to load data from excel to sap with a Buttonclick. I have copied this function module and set it remotable. But i can´t call it from excel.
Can you give me some tips how can i
upload data from excel with vba by click a button.
The problem seems the function: call method cl_gui_frontend_services=>clipboard_import in the function module, because when i comment this function call the vba-call is true but no results.
How can I call the function module correct with vba?
Thanks a lot for your tips!!!!
Chris
Message was edited by:
 Christoph Kirschner

HI
Uploading data directly from Excel file format
* Upload data direct from excel.xls file to SAP
REPORT ZEXCELUPLOAD.
PARAMETERS: filename LIKE rlgrap-filename MEMORY ID M01,
 begcol TYPE i DEFAULT 1 NO-DISPLAY,
 begrow TYPE i DEFAULT 1 NO-DISPLAY,
 endcol TYPE i DEFAULT 100 NO-DISPLAY,
 endrow TYPE i DEFAULT 32000 NO-DISPLAY.
* Tick don't append header
PARAMETERS: kzheader AS CHECKBOX.
DATA: BEGIN OF intern OCCURS 0.
 INCLUDE STRUCTURE alsmex_tabline.
DATA: END OF intern.
DATA: BEGIN OF intern1 OCCURS 0.
 INCLUDE STRUCTURE alsmex_tabline.
DATA: END OF intern1.
DATA: BEGIN OF t_col OCCURS 0,
 col LIKE alsmex_tabline-col,
 size TYPE i.
DATA: END OF t_col.
DATA: zwlen TYPE i,
 zwlines TYPE i.
DATA: BEGIN OF fieldnames OCCURS 3,
 title(60),
 table(6),
 field(10),
 kz(1),
 END OF fieldnames.
* No of columns
DATA: BEGIN OF data_tab OCCURS 0,
 value_0001(50),
 value_0002(50),
 value_0003(50),
 value_0004(50),
 value_0005(50),
 value_0006(50),
 value_0007(50),
 value_0008(50),
 value_0009(50),
 value_0010(50),
 value_0011(50),
 value_0012(50),
 value_0013(50),
 value_0014(50),
 value_0015(50),
 value_0016(50),
 value_0017(50),
 value_0018(50),
 value_0019(50),
 value_0020(50),
 value_0021(50),
 value_0022(50),
 value_0023(50),
 value_0024(50),
 value_0025(50),
 value_0026(50),
 value_0027(50),
 value_0028(50),
 value_0029(50),
 value_0030(50),
 value_0031(50),
 value_0032(50),
 value_0033(50),
 value_0034(50),
 value_0035(50),
 value_0036(50),
 value_0037(50),
 value_0038(50),
 value_0039(50),
 value_0040(50),
 value_0041(50),
 value_0042(50),
 value_0043(50),
 value_0044(50),
 value_0045(50),
 value_0046(50),
 value_0047(50),
 value_0048(50),
 value_0049(50),
 value_0050(50),
 value_0051(50),
 value_0052(50),
 value_0053(50),
 value_0054(50),
 value_0055(50),
 value_0056(50),
 value_0057(50),
 value_0058(50),
 value_0059(50),
 value_0060(50),
 value_0061(50),
 value_0062(50),
 value_0063(50),
 value_0064(50),
 value_0065(50),
 value_0066(50),
 value_0067(50),
 value_0068(50),
 value_0069(50),
 value_0070(50),
 value_0071(50),
 value_0072(50),
 value_0073(50),
 value_0074(50),
 value_0075(50),
 value_0076(50),
 value_0077(50),
 value_0078(50),
 value_0079(50),
 value_0080(50),
 value_0081(50),
 value_0082(50),
 value_0083(50),
 value_0084(50),
 value_0085(50),
 value_0086(50),
 value_0087(50),
 value_0088(50),
 value_0089(50),
 value_0090(50),
 value_0091(50),
 value_0092(50),
 value_0093(50),
 value_0094(50),
 value_0095(50),
 value_0096(50),
 value_0097(50),
 value_0098(50),
 value_0099(50),
 value_0100(50).
DATA: END OF data_tab.
DATA: tind(4) TYPE n.
DATA: zwfeld(19).
FIELD-SYMBOLS: <fs1>.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR filename.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
 EXPORTING
 mask = '*.xls'
 static = 'X'
 CHANGING
 file_name = filename.
START-OF-SELECTION.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
 EXPORTING
 filename = filename
 i_begin_col = begcol
 i_begin_row = begrow
 i_end_col = endcol
 i_end_row = endrow
 TABLES
 intern = intern
 EXCEPTIONS
 inconsistent_parameters = 1
 upload_ole = 2
 OTHERS = 3.
IF sy-subrc <> 0.
 WRITE:/ 'Upload Error ', SY-SUBRC.
ENDIF.
END-OF-SELECTION.
LOOP AT intern.
 intern1 = intern.
 CLEAR intern1-row.
 APPEND intern1.
ENDLOOP.
SORT intern1 BY col.
LOOP AT intern1.
 AT NEW col.
 t_col-col = intern1-col.
 APPEND t_col.
 ENDAT.
 zwlen = strlen( intern1-value ).
 READ TABLE t_col WITH KEY col = intern1-col.
 IF sy-subrc EQ 0.
 IF zwlen > t_col-size.
 t_col-size = zwlen.
* Internal Table, Current Row Index
 MODIFY t_col INDEX sy-tabix.
 ENDIF.
 ENDIF.
ENDLOOP.
DESCRIBE TABLE t_col LINES zwlines.
SORT intern BY row col.
IF kzheader = 'X'.
 LOOP AT intern.
 fieldnames-title = intern-value.
 APPEND fieldnames.
 AT END OF row.
 EXIT.
 ENDAT.
 ENDLOOP.
ELSE.
 DO zwlines TIMES.
 WRITE sy-index TO fieldnames-title.
 APPEND fieldnames.
 ENDDO.
ENDIF.
SORT intern BY row col.
LOOP AT intern.
 IF kzheader = 'X'
 AND intern-row = 1.
 CONTINUE.
 ENDIF.
 tind = intern-col.
 CONCATENATE 'DATA_TAB-VALUE_' tind INTO zwfeld.
 ASSIGN (zwfeld) TO <fs1>.
 <fs1> = intern-value.
 AT END OF row.
 APPEND data_tab.
 CLEAR data_tab.
 ENDAT.
ENDLOOP.
CALL FUNCTION 'DISPLAY_BASIC_LIST'
 EXPORTING
 file_name = filename
 TABLES
 data_tab = data_tab
 fieldname_tab = fieldnames.
*-- End of Program
Excel Upload Alternative - KCD_EXCEL_OLE_TO_INT_CONVERT
*Title : Excel Uploading
TYPES: BEGIN OF t_datatab,
 col1(25) TYPE c,
 col2(30) TYPE c,
 col3(30) TYPE c,
 col4(30) TYPE c,
 col5(30) TYPE c,
 col6(30) TYPE c,
 col7(30) TYPE c,
 col8(30) TYPE c,
 col9(30) TYPE c,
 col10(30) TYPE c,
 col11(30) TYPE c,
 END OF t_datatab.
DATA: it_datatab TYPE STANDARD TABLE OF t_datatab INITIAL SIZE 0,
 wa_datatab TYPE t_datatab.
Data : p_table type t_datatab occurs 0 with header line.
DATA : gd_scol TYPE i VALUE '1',
 gd_srow TYPE i VALUE '1',
 gd_ecol TYPE i VALUE '256',
 gd_erow TYPE i VALUE '65536'.
DATA: it_tab TYPE filetable,
 gd_subrc TYPE i.
field-symbols : <fs>.
*Selection screen definition
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_file LIKE rlgrap-filename
 DEFAULT 'c:test.xls' OBLIGATORY. " File Name
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
REFRESH: it_tab.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
 EXPORTING
 window_title = 'Select File'
 default_filename = '*.xls'
 multiselection = ' '
 CHANGING
 file_table = it_tab
 rc = gd_subrc.
LOOP AT it_tab INTO p_file.
* so_fpath-sign = 'I'.
* so_fpath-option = 'EQ'.
* append so_fpath.
ENDLOOP.
START-OF-SELECTION.
PERFORM upload_excel_file TABLES it_datatab
 USING p_file
 gd_scol
 gd_srow
 gd_ecol
 gd_erow.
* END-OF-SELECTION.
END-OF-SELECTION.
LOOP AT it_datatab INTO wa_datatab.
 WRITE:/ wa_datatab-col1,
 wa_datatab-col2,
 wa_datatab-col3,
 wa_datatab-col4,
 wa_datatab-col5,
 wa_datatab-col6,
 wa_datatab-col7,
 wa_datatab-col8,
 wa_datatab-col9,
 wa_datatab-col10,
 wa_datatab-col11.
ENDLOOP.
*& Form UPLOAD_EXCEL_FILE
* upload excel spreadsheet into internal table
* -->P_TABLE Table to return excel data into
* -->P_FILE file name and path
* -->P_SCOL start column
* -->P_SROW start row
* -->P_ECOL end column
* -->P_EROW end row
FORM upload_excel_file TABLES p_table
 USING p_file
 p_scol
 p_srow
 p_ecol
 p_erow.
DATA : lt_intern TYPE kcde_cells OCCURS 0 WITH HEADER LINE.
* Has the following format:
* Row number | Colum Number | Value
* i.e. 1 1 Name1
* 2 1 Joe
DATA : ld_index TYPE i.
* Note: Alternative function module - 'ALSM_EXCEL_TO_INTERNAL_TABLE'
CALL FUNCTION 'KCD_EXCEL_OLE_TO_INT_CONVERT'
 EXPORTING
 filename = p_file
 i_begin_col = p_scol
 i_begin_row = p_srow
 i_end_col = p_ecol
 i_end_row = p_erow
 TABLES
 intern = LT_INTERN
 EXCEPTIONS
 inconsistent_parameters = 1
 upload_ole = 2
 OTHERS = 3.
IF sy-subrc <> 0.
 FORMAT COLOR COL_BACKGROUND INTENSIFIED.
 WRITE:/ 'Error Uploading file'.
 EXIT.
ENDIF.
IF lt_intern[] IS INITIAL.
 FORMAT COLOR COL_BACKGROUND INTENSIFIED.
 WRITE:/ 'No Data Uploaded'.
 EXIT.
ELSE.
 SORT lt_intern BY row col.
 LOOP AT lt_intern.
 MOVE lt_intern-col TO ld_index.
 assign component ld_index of structure
 p_table to <fs>.
move : lt_intern-value to <fs>.
* MOVE lt_intern-value TO p_table.
 AT END OF row.
 APPEND p_table.
 CLEAR p_table.
 ENDAT.
 ENDLOOP.
ENDIF.
ENDFORM. "UPLOAD_EXCEL_FILE
Regards
Pavan

No data from device?

i'm working on a huge project in which i have to use many different videos, vhs, video8, dv and more. i use several devices to digitalize the analog stuff, f.e. a canopus advc 300 and a sony dcr-trv460e.
i've done this quite often, but now i have a problem i've never had before.
when i try to import footage from the sony dcr-trv 460e - connected via firewire - fcpx says "no data from device". i can watch the video in the preview, i can control the handycam (start, stop, pause), but fcpx won't import the footage, not a second, when i click on "import".
i'm able to import the footage in quicktime, even in imovie, but not in fcpx.
what's weird is, that i tried to import videos i already imported with fcpx some time ago, it worked then, but not now, very strange.
has apple made some changes in fcpx that make it impossible to import the old stuff? any idea how i could solve my problem?
2nd best would be to import the footage with imovie and then import the files in fcpx.
3rd best to import with quicktime…

Wolfgang Matzl wrote:
canopus works fine, as well as all other devices.
i have tons of tapes and tried a few, none worked.
i tried to capture on both my new imac and my mbpro, no way.
but now i'm sure there is something wrong with the sony handycam, i tried to import with my old final cut studio, and it's not possible, also. fc pro says: waiting for timecode.
so i'm confused now. does the sony dcr-trv not send a timecode? maybe, and this will explain the troubles. but on the other hand i imported successfully some footage with exact this device.
maybe i used the canopus then to correct the timebase, i can't remember how i did it. but this would mean i have to accept loss of quality, since i have to connect the sony with s-vhs with the canopus and convert it.
right now i'm importing a tape with imovie and will have a look how the result is, but as far as i remember, the audio has to be re-rendered when importing in fcpx…
My finger is pointing to a Timecode issue.
Is timecode enabled in the camera?
Is it continuous on the tape?
Al

"no data from device" when trying to capture HDV

I need to capture additional footage for an HDV project I am already editing. Capturing the initial footage (about a month ago) went smoothly. Now however, when trying to capture footage from a new tape shot just last week, I simply cannot. If I try to Capture Now, I get a "No Data from Device" message and the capture attempt aborts. If I log some clips and Batch Capture, the material cues and begins to play but the capture window just continues to say CUEING SOURCE MATERIAL and captures nothing. I am using the Sony HVR-M10U deck as a capture device.
The only thing that has changed between the original capture and this latest attempt is that I have also been working on a DV project at the same time, and I used the M10U to capture some DV footage for that project. In order to succesfully capture DV footage I had to force the deck to play only DV (by changing the VCR settings in the menu).
To try and capture this latest HDV footage, I went back into the menu and forced the deck to play HDV only. In searching for answers I came across this Apple article (http://docs.info.apple.com/article.html?artnum=302407) and followed those exact steps.
However, nothing seems to work. I do have device control and the timecode is being read off the deck in Log & Capture (so the firewire connection is fine), but there's no video in the preview window and no capturing is possible. I am able to open my DV project, reset the menu on the deck, and capture DV footage - but I can't for the life of me switch to capturing HDV footage.
Any bright ideas would be much appreciated - I'm really at wits end.
thanks,
Tom

I am having a similar problem with my sony HVRZ1U, I can capture dv through firewire no problem but when I choose easy setup for HDV it does not recognize the device.
Funny thing is I tried to download clips on a pc in Premiere with all the similar settings on my camera and it works fine, I have deck control and can capture HDV footage, so that rules out a problem with the camera. Back to FCP5 with the same settings and nothing.
Went through uninstalling quicktime 7.03 back to 7.01 - nothing
Deleted the preferences in FCP5 - nothing
Checked the firewire connections and cables - they work fine
Using all the right settings on the camera and in FCP5
The tape format was shot correctly
Any light on what could be going wrong would be very very much appreciated
Al

I'm getting a "No Data From Device" error for older video import

I'm trying to create digital video archives of some older (Hi-8) tapes before they turn to dust. I've got a Sony deck with iLink and have been using iMovie, which is time consuming but error free. I want to use the "Create Camera Archives" feature in FCP X, but am not able to import any video. FCP recognizes the deck, lets me control it and displays video in the capture window. But it does not capture anything - camera archives are empty and when I try to import the video I get a "No Data from Device" message over the import window, as the video is playing in the background. I thought it might be an issue of import settings... but I can't find any to change.
Any advice appreciated. Thanks.

Make sure all your settings are correct for capture and playback. Also make sure that the settings on the deck are the same as well. I know I had an issue when my Sony FX1 HDV camera was set to DV, FCP gave a similar error message.

Can I create a Stored Procedure That access data from tables of another servers?

I'm developing a procedure and within it I'm trying to access another server and make a select into a table that belongs to this another server. When I compile this procedure I have this error message: " PLS-00904: insufficient privilege to access object BC.CADPAP", where BC.CADPAP is the problematic table.
How can I use more than one connection into an Oracle Stored Procedure?
How I can access tables of a server from a Stored Procedure since the moment I'm already connected with another server?
Can I create a Stored Procedure That access data from tables of another servers?

You need to have a Database Link between two servers. Then you could do execute that statement without any problem. Try to create a database link with the help of
CREATE DATABASE LINK command. Refer Document for further details

Is it possible to get data from a smashed/broken iPod touch 4th gen?

Is it possible to get data from a smashed/broken iPod touch 4th gen?

- If when you connect the iPod to your computer it appears in iTunes then you can make a backup and then restore another iPod or other iOS device from that backup.
- Otherwise you will have to go to a data recovery company.
- When I go to the YouTube link I can't get the video to play.

Access data from 2 SAP systems into WebDynpro..Please guide :)

Hello,
Is is possible to access/retrieve data from 2 seperate SAP systems in Web Dynpro?
To ellaborate more:
Under normal situation - We create a Model using which you can access the required BAPI/RFC and using the JCo this connection is complete.
So, in the SLD there is one JCo connection/object for this model.
Now as per my quesry, I want to access data from 2 systems... like CRM & R/3.
So how can I do this:
1. Create 2 seperate model objects and then do Model Context Mapping. If this is rite, then I will have to create 2 JCo connections in SLD.
2. Is is possibe that under one model (example this model is accessing R/3), I need to access data from CRM without creatiing another model. So that are the possiblities? Secondly is this way/path recommended?If no, how should I proceed.
Hope my requirements are clear
Awaiting Reply.
Thanks & Warm Regards,
Ritu

Ritu,
There is no way you can create single model for 2 different R/3 systems (unless SAP decides to implement this in later versions).
If you still want to stick with a single model approach, I would suggest to use Webservice model where the R/3 interaction part would be taken care by WebService.
Ashutosh

Questions about accessing data from old drives

I am trying to access data from a 10-12 yr old IDE drive that I used with a PC way back when. I place it in an enclosure, and when connected, receive a message via Lion (see attached). Anyone have any idea if the drive may work when connected to a modern PC? Did Windows 10-12 years ago use some system that makes drives not recognizable with Macs OR are the drives just likely bad?
Thanks.

Wired is with Ethernet. Connect both with an Ethernet cable

Accessing data from db table on another client on a separate server

Hi
We are trying to access data from a db table on client 400 NSQ with a program running on client 200 NSD. We are also trying to find the name of the table in which the connection configuration should be maintained. The two clients are on separate servers.
Regards
B.Garlipp
Edited by: B.Garlipp on May 31, 2010 9:22 AM

Create an RFC destination for NSQ system client 400 into your system where program is running (in this case NSD Client 200)
Now in your program you can call function module RFC_READ_TABLE (with reference to this destination) to read entries from the other system.
If you know ABAP, In fact you can create a Z RFC FM specific for this tables, so that you get the data in exact structure. This is because RFC_READ_TABLE returns data in text format with a delimiter.
Cheers.
Edited by: Rashid Javed on May 31, 2010 10:36 AM

Access Data from device with Broken Screen

Similar Messages

Maybe you are looking for