Access denied error while trying to install graphics drivers

Hello,
I have a new toshiba laptop P70-A. I have installed windows 7 and the pc was working excellent up until now. Noticed yesterday that the nvidia automated system failed to install the new update. When I tried to install the new driver manually, even from the
device manager, I got the access denied message. 
A day now wasted reading all the possible causes and solutions but with no luck. Read all the forums and all the posts, tried almost everything. Below youll find everything I tried as a solution and failed.
1.Disabled UAC
2.Enabled the administrator account and trying to take control from there
3.Run the subinacl and the reset.cmd
4.Tried manually to take control the folder windows (and access denied while changing the rights)
5. Scanned the system with everything there is available ( Kaspersky, MalwareBytes, RegCurePro, Tuneup Utilities, CCleaner) The system came out clean.
6. Tried restoring the system to an earlier time (got again access denied error code 0x80070005)
7. Checked all the group policies (all seem to be fine)
8. Run a script to take immediate ownership over all of C:
TAKEOWN /A /F C:
then the next one
TAKEOWN /F C: 
9. With subinacl I run all the above scripts... (still nothing changed)
@echo off
title Resetting ACLs...
echo.
echo Determine whether we are on an 32 or 64 bit machine
echo.
if "%PROCESSOR_ARCHITECTURE%"=="x86" if "%PROCESSOR_ARCHITEW6432%"=="" goto x86
set ProgramFilesPath=%ProgramFiles(x86)%
goto startResetting
:x86
set ProgramFilesPath=%ProgramFiles%
:startResetting
echo.
cd /d "%ProgramFilesPath%\Windows Resource Kits\Tools"
echo. 
echo Resetting ACLs...
echo (this may take several minutes to complete)
echo. 
echo IMPORTANT NOTE: For this script to run correctly, you must change
echo the values named Athena to be the Windows user account that
echo you are logged in with.
echo.
echo ==========================================================================
echo. 
echo. 
subinacl /subkeyreg HKEY_CURRENT_USER /grant=administrators=f /grant=system=f /grant=restricted=r /grant=Athena=f /setowner=administrators > %temp%\subinacl_output.txt
echo. 
echo. 
subinacl /keyreg HKEY_CURRENT_USER /grant=administrators=f /grant=system=f /grant=restricted=r /grant=Athena=f /setowner=administrators >> %temp%\subinacl_output.txt
echo. 
echo. 
subinacl /subkeyreg HKEY_LOCAL_MACHINE /grant=administrators=f /grant=system=f /grant=users=r /grant=everyone=r /grant=restricted=r /setowner=administrators >> %temp%\subinacl_output.txt
echo. 
echo. 
subinacl /keyreg HKEY_LOCAL_MACHINE /grant=administrators=f /grant=system=f /grant=users=r /grant=everyone=r /grant=restricted=r /setowner=administrators >> %temp%\subinacl_output.txt
echo. 
echo. 
subinacl /subkeyreg HKEY_CLASSES_ROOT /grant=administrators=f /grant=system=f /grant=users=r /setowner=administrators >> %temp%\subinacl_output.txt
echo. 
echo. 
subinacl /keyreg HKEY_CLASSES_ROOT /grant=administrators=f /grant=system=f /grant=users=r /setowner=administrators >> %temp%\subinacl_output.txt
echo. 
echo. 
echo System Drive...
subinacl /subdirectories %ProgramFilesPath%\ /grant=administrators=f /grant=system=f /grant=users=e >> %temp%\subinacl_output.txt
echo. 
echo. 
echo Windows Directory...
subinacl /subdirectories %windir%\ /grant=administrators=f /grant=system=f /grant=users=e >> %temp%\subinacl_output.txt
echo. 
echo. 
echo ==========================================================================
echo. 
echo FINISHED.
echo. 
echo Press any key to exit . . .
pause >NUL
Im frustrated really... ANY help at all would be really appreciated.
Thanks in Advance and sorry for the long post
Athena 

Hello,
Thanks for the replies, i much appreciate it. I tried all of the above with no luck again. Safe mode allows me though to install drivers but thats reverting the moment im entering windows. Im always running commands and programs as a administrator or in
the Admin enabled account.
It seems the problem is solved today. Via tune up utilities I disabled most of the startup programs and services and it seems that 1 service is causing this issue. Although I havent played much with the disabled services but 3 remain to be checked. One of
the three is causing this.
Thanks again guys and Ill keep you posted about the soft. conflict.
Athena

Similar Messages

  • Access denied error while trying to add a home directory to a windows local user account

    I have seen the following as a suggestion to create home directory for a user - account17. So I have tried the following script to create a home directory :   
         $sec_password = ConvertTo-SecureString 'Password' -AsPlainText -Force;
        $credential = New-Object System.Management.Automation.PSCredential -ArgumentList 'MachineName\account17', $sec_password;
        Start-Process cmd  -Credential $credential -ErrorAction SilentlyContinue;  
        $user = Get-WmiObject -Namespace root/cimv2 -Class win32_useraccount -Filter "LocalAccount=True AND Name='account17'";
        $userprofile = Get-WmiObject -Namespace root/cimv2 -Class win32_userprofile -Filter "SID='$($user.sid)' ";
        $userprofile.localpath;
    I am getting the following error :' This command cannot be executed due to the error: Access is denied.'
    What are the permissions required to create home directory through powershell?

    pretty much the same permissions required to create the home directory by any other means.
    by the way which command is it that is generating that error? does "start-process cmd" successfully create a windows profile on the machine? Perhaps you just need to ensure that the profile is fully created before the rest of your script continues.
    Al Dunbar -- remember to 'mark or propose as answer' or 'vote as helpful' as appropriate.

  • Getting access denied error while importing file using input type="file"

    Hi All,
    I am using struts application wherein I need to import file for some purpose.I have used input type="file" for the same which goes like:
    <input type="file" id="uploadFile" name="uploadFile" size="50">
    I have the import button on which I have used onClick event to call javascript function submitValues() used to validate all the fields from the page which goes like:
    <input type="button" name="select" value="Import" class="CSSButton" onClick="javascript:submitValues();">
    The JS function then in turn submits the form and calls the action.The problem is sometimes even when the correct path is specified for the file to be imported results in access denied error.This error comes sometimes and other times it works fine.But when this error comes,I need to relogin into the application and then it works fine.I am using IE7 for this.
    Any idea why I am getting access denied error while importing? Has it got something to do with IE7 version or with the input type="file" which is being used here?
    Thanks for any help if anyone can provide.
    Edited by: passionateforjava on Mar 4, 2009 2:18 AM

    vishnuS1984 wrote:
    Hi Friends,
    I have gone through scores of examples and i am failing to understand the right thing to be done to copy a file from one directory to another. Here is my class...So let's see... C:\GetMe1 is a directory on your machine, right? And this is what you are doing with that directory:
    public static void copyFiles(File src, File dest) throws IOException
    // dest is a 'File' object but represents the C:\GetMe1 directory, right?
    fout = new FileOutputStream (dest);If it's a directory, where in your code are you appending the source file name to the path, before trying to open an output stream on it? You're not.
    BTW, this is awful:
    catch (IOException e)
    IOException wrapper = new IOException("copyFiles: Unable to copy file: " +
    src.getAbsolutePath() + "to" + dest.getAbsolutePath()+".");
    wrapper.initCause(e);
    wrapper.setStackTrace(e.getStackTrace());
    throw wrapper;
    }1) You're hiding the original IOException and replacing it with your own? For what good purpose?
    2) Even if you had a good reason to do that, this would be simpler and better:
    throw new IOException("your custom message goes here", e);
    rather than explicitly invokign initCause and setStackTrace. Yuck!

  • Error while trying to install EBS 12.1.1

    We are getting an error while trying to install EBS R12.1.1 on Linux x86_64 os(RHEL 5.2).We are getting the error at step 2 of 5 during database configuration stage 33% (65%) stage.The error is as given below,
    RW-50004:Error code received when running external process.Check log files for details.Running Database Install Driver for TEST instance.
    We checked the log files and in ApplyDB_****.log the error is
    RW-50010 :script has returned an error: 1
    How to fix these issues??
    Regards,
    Rupdipt

    Hi Taj,
    I am getting these error messages consistently throughout the log file,
    Executing CreateDB...
    ADX Database Utility
    getConnectionUsingAppsJDBCConnector() -->
    APPS_JDBC_URL='null'
    Trying to get connection using SID based connect descriptor
    getConnection() -->
    sDbHost : testerp
    sDbDomain : eigl.com
    sDbPort : 1521
    sDbSid : TEST
    sDbUser : APPS
    Trying to connect using SID...
    getConnectionUsingSID() -->
    JDBC URL: jdbc:oracle:thin:@testerp.eigl.com:1521:TEST
    Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
    ORA-27101: shared memory realm does not exist
    Linux-x86_64 Error: 2: No such file or directory
    Trying to connect using SID as ServiceName
    getConnectionUsingServiceName() -->
    JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=testerp.eigl.com)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=TEST)))
    Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
    ORA-27101: shared memory realm does not exist
    Linux-x86_64 Error: 2: No such file or directory
    Trying to connect using SID as ServiceName.DomainName
    getConnectionUsingServiceName() -->
    JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=testerp.eigl.com)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=TEST.eigl.com)))
    Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
    ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
    The Connection descriptor used by the client was:
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=testerp.eigl.com)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=TEST.eigl.com)))
    Connection could not be obtained; returning null
    -------------------ADX Database Utility Finished---------------
    adcrdb.sh started at Wed Jul 22 17:47:10 IST 2009
    The environment settings are as follows ...
    ORACLE_HOME : /d01/oracle/TEST/db/tech_st/11.1.0
    ORACLE_SID : TEST
    TWO_TASK :
    PATH : /d01/oracle/TEST/db/tech_st/11.1.0/perl/bin:/d01/oracle/TEST/db/tech_st/11.1.0/bin:/usr/bin:/usr/sbin:/d01/oracle/TEST/db/tech_st/11.1.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/bin:/d04/StageR12/startCD/Disk1/rapidwiz/unzip/Linux_x64:/usr/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin:.
    LD_LIBRARY_PATH : /d01/oracle/TEST/db/tech_st/11.1.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/d01/oracle/TEST/db/tech_st/11.1.0/lib:/usr/dt/lib:/d01/oracle/TEST/db/tech_st/11.1.0/ctx/lib
    Executable : /d01/oracle/TEST/db/tech_st/11.1.0/bin/sqlplus
    The log information will be written to
         /d01/oracle/TEST/db/tech_st/11.1.0/appsutil/log/TEST_testerp/adcrdb_TEST.txt
    Creating the control file for TEST_testerp database ...
    SQL*Plus: Release 11.1.0.7.0 - Production on Wed Jul 22 17:47:11 2009
    Copyright (c) 1982, 2008, Oracle. All rights reserved.
    Connected to an idle instance.
    ORACLE instance shut down.
    Connected to an idle instance.
    ORACLE instance started.
    Total System Global Area 1068937216 bytes
    Fixed Size          2166536 bytes
    Variable Size          427819256 bytes
    Database Buffers     624951296 bytes
    Redo Buffers          14000128 bytes
    CREATE CONTROLFILE REUSE SET DATABASE "TEST"
    ERROR at line 1:
    ORA-01503: CREATE CONTROLFILE failed
    ORA-01565: error in identifying file
    '/d01/oracle/TEST/db/apps_st/data/system05.dbf'
    ORA-27037: unable to obtain file status
    Linux-x86_64 Error: 2: No such file or directory
    Additional information: 3
    alter database open resetlogs
    ERROR at line 1:
    ORA-01507: database not mounted
    alter tablespace TEMP1 add tempfile '/d01/oracle/TEST/db/apps_st/data/temp01.dbf' REUSE
    ERROR at line 1:
    ORA-01109: database not open
    alter tablespace TEMP2 add tempfile '/d01/oracle/TEST/db/apps_st/data/temp02.dbf' REUSE
    ERROR at line 1:
    ORA-01109: database not open
    ALTER DATABASE RENAME GLOBAL_NAME TO "TEST.eigl.com"
    ERROR at line 1:
    ORA-01109: database not open
    ORA-01507: database not mounted
    ORACLE instance shut down.
    Connected to an idle instance.
    ORACLE instance started.
    Total System Global Area 1068937216 bytes
    Fixed Size          2166536 bytes
    Variable Size          427819256 bytes
    Database Buffers     624951296 bytes
    Redo Buffers          14000128 bytes
    ORA-00205: error in identifying control file, check alert log for more info
    BEGIN dbms_backup_restore.zeroDbid(0); END;
    ERROR at line 1:
    ORA-00210: cannot open the specified control file
    ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 4652
    ORA-06512: at line 1
    ORACLE instance shut down.
    Connected to an idle instance.
    ORACLE instance started.
    Total System Global Area 1068937216 bytes
    Fixed Size          2166536 bytes
    Variable Size          427819256 bytes
    Database Buffers     624951296 bytes
    Redo Buffers          14000128 bytes
    CREATE CONTROLFILE REUSE SET DATABASE "TEST"
    ERROR at line 1:
    ORA-01503: CREATE CONTROLFILE failed
    ORA-01565: error in identifying file
    '/d01/oracle/TEST/db/apps_st/data/system05.dbf'
    ORA-27037: unable to obtain file status
    Linux-x86_64 Error: 2: No such file or directory
    Additional information: 3
    alter database open resetlogs
    ERROR at line 1:
    ORA-01507: database not mounted
    alter tablespace TEMP1 add tempfile '/d01/oracle/TEST/db/apps_st/data/temp01.dbf' REUSE
    ERROR at line 1:
    ORA-01109: database not open
    alter tablespace TEMP2 add tempfile '/d01/oracle/TEST/db/apps_st/data/temp02.dbf' REUSE
    ERROR at line 1:
    ORA-01109: database not open
    ALTER DATABASE RENAME GLOBAL_NAME TO "TEST.eigl.com"
    ERROR at line 1:
    ORA-01109: database not open
    Error Running create/replace library with adupdlib.sql
    ORA-01109: database not open
    PL/SQL procedure successfully completed.
    Disconnected from Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    exit_code=0
    Checking for errors ...
    The database has not been successfully created. Shutting down the instance ...
    SQL*Plus: Release 11.1.0.7.0 - Production on Wed Jul 22 17:47:20 2009
    Copyright (c) 1982, 2008, Oracle. All rights reserved.
    Connected.
    ORACLE instance shut down.
    Disconnected from Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    .end std out.
    .end err out.
    Whats the solution??
    Regards,
    Rupdipt

  • Access Denied Error while accessing "Site Settings Access requests and invitations"

    Hi,
    I am getting Access Denied Error while accessing "Site Settings > Access requests and invitations" in SharePoint  2013 online. Currently I am the owner of the site and have "FULL CONTROL" access. I am able to access using
    site collection account. So, what permission I have to give my regular account to access this page?
    Thanks, Pal

    Hello,
    Have you recently changed the Owners group of the site collection or removed the user from the original owners group? 
    The reason I am asking is when the Access requests and invitations list are created, the permissions are given only to the default owners group at the time that the Access Request list was created.  If this "regular account" is not part of that owners
    group, the user will receive access denied.  Site Collection Admins always have permissions for the Access Request List.
    A workaround for the Access Denied issue is listed in the KB article http://support.microsoft.com/kb/2911390/en-us.  By giving the correct group or user the permissions to this list, the users will not receive
    the Access Denied issue anymore.  
    Preferably, in order to grant the user the full permissions ( you will see features like resending invitations may still fail after implementing the above workaround) there is one other workaround that may be required depending on what the original issue
    was.  Below are additional steps to restore full functionality.
    1)Access the /_layouts/15/permsetup.aspx of the site collection, make sure the default Owners Group
    is set correctly.  (There is a group selected)
    2) Add user to that Owners Group.  (Issue may be resolved at this step if the site collection Owners
    Group was never changed, if not continue to next step.)
    3) Implement workaround on http://support.microsoft.com/kb/2911390/en-us, by adding that owners
    group as Full control on Access Request list Permissions.
    Let me know how this works out for you.
    - Shpendi Jashari

  • Timerjob Access denied error while opening web object

    Hi Team,
    I have created a timer job to get list information on the site. Everything is fine in the development(Stand alone server) . Got access denied error while running same timer job in QA server(one app and one WFE).
    Note: This timer job is globally deployed.
    Code snippet : 
    SPSite site1 = webApp.Sites[0];
    SPWeb web = site1.RootWeb;
    SPSecurity.RunWithElevatedPrivileges(delegate()
    using (SPSite site = new SPSite(site1.ID))
    using (SPWeb currWeb = site.OpenWeb(web.ID))                  // Got access denied error here.
    Additional information:
    Sharepoint timer service account : Domain\SP_Farm
    Site app pool account : Domain\SP_App.
    Both accounts have site collection administrative access on the site. Do i need to check access permissions on DB level also  this error ?
    Waiting for urgent reply..

    Hi,
    1. Please check the link below:
    Fixing Access Denied Errors With SharePoint 2010 Timer Jobs
    http://www.sharepointsecurity.com/sharepoint/sharepoint-security/fixing-access-denied-errors-with-sharepoint-2010-timer-jobs/
    2. Try to set RemoteAdministratorAccessDenied  to false using PowerShell
    Access denied when deploying a timer Job or activating a feature from SharePoint 2010 content web application
    https://support.microsoft.com/kb/2564009?wa=wsignin1.0
    3. Check your ULS log for detail error message.
    Best Regards
    Dennis Guo
    TechNet Community Support

  • Error while trying to install SAP CE 7.1 EHP 1 on Windows 7

    I am trying to install SAP CE 7.1 EHP 1 on Windows 7.  I am getting below error while trying to install. can you please help to fix this problem?
    Running msiexec failed with return code 1603: undefined
    Commandline was msiexec.exe /norestart /L sapmmcX86u.log /i sapmmcX86u.msi /qn
    If you want the installer to retry, choose Yes. If you want the installer to abort the installation, choose No.
    Thanks,
    Sridhar.

    I donu2019t think so it is windows 7 or 64/32 bit hardware/software issue. I have faced u201Cmsiexec failed with return code 1603u201D error many times during SAP installation and solved this issue with below mentioned procedure.
    Solution:
    Just change the location of temp directory to empty folder in user environment variable without cancel installation in current user session. After that, click on yes button to continue the installation. If installation will ended after click on yes button, restart the installation with continue old installation option.
    Regards.
    Yasir

  • Receiving an error while trying to installed Photoshop CS4 . error code 6. using windows 7

    receiving an error while trying to installed Photoshop CS4 . error code 6. using windows 7

    There isn't much here which is actionable.  Please review your installation logs by following the steps listed at Troubleshoot installation with install logs | CS3, CS4 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-installation-install-logs-cs3.html.

  • Access denied error while writing a file to the file system - myfileupload.saveas() throws system.unauthorizedexception

    hi,
    as part of my requirement , i have to perform read and  write  operations of  few files [ using the file upload control in my custom visual web part] and on submit button click.
    but while writing these files - with the help of  fileupload control - and when i use  myfileupload.saveas(mylocation);
    - i am saving these files into my D:\ drive of my server , where i am executing my code -, am getting access denied error.
    it throws system.unauthorizedexception.
    i have given full control on that folder where i was trying to store my attached files. and also  after following asp.net forums,
    i have added  iusr group added and performed all those steps such that, the file is saved in my D:\ drive.
    but unfortunately  that didnt happen.
    also
    a) i am trying the code with runwithelevatedprivileges(delegate() )  code
    b) shared the drive within the  d :drive where i want o save the files.
    c) given the full privieleges for the app pool identity- in my case , its
    network service.
    the  other strange thing is that, the same code works perfectly in  other machine, where the same sp, vs 2012  etc were installed .
    would like to know, any other changes/ steps i need to make it on this  server, where i am getting the  error.
    help is  appreciated!

    vishnuS1984 wrote:
    Hi Friends,
    I have gone through scores of examples and i am failing to understand the right thing to be done to copy a file from one directory to another. Here is my class...So let's see... C:\GetMe1 is a directory on your machine, right? And this is what you are doing with that directory:
    public static void copyFiles(File src, File dest) throws IOException
    // dest is a 'File' object but represents the C:\GetMe1 directory, right?
    fout = new FileOutputStream (dest);If it's a directory, where in your code are you appending the source file name to the path, before trying to open an output stream on it? You're not.
    BTW, this is awful:
    catch (IOException e)
    IOException wrapper = new IOException("copyFiles: Unable to copy file: " +
    src.getAbsolutePath() + "to" + dest.getAbsolutePath()+".");
    wrapper.initCause(e);
    wrapper.setStackTrace(e.getStackTrace());
    throw wrapper;
    }1) You're hiding the original IOException and replacing it with your own? For what good purpose?
    2) Even if you had a good reason to do that, this would be simpler and better:
    throw new IOException("your custom message goes here", e);
    rather than explicitly invokign initCause and setStackTrace. Yuck!

  • Access denied Error while calling Web Service form Infopath Form 2010.

    Hi Dear All,
    I have been facing an error while calling an GetUserProfileByName() web service method from InfoPath 2010 from.
    i have FBA(Forms Base Authentication )configured . After Infopath form published to site collection when i select an user from people picker control i want to get Email Id of Selected user for that i am calling getUserProfileByName() Web Method, but 
    i am getting Access denied error code 500.
    Any Help would be more than welcome.
    Thanks.

    Hi,
    Greetings. Please check 
    Check the IE settings. Click Internet Options> Security>Custom level. Make sure that the ‘Access data source across domains’ is enabled. Make sure that you have permission to the web service and to the content which the web service tries to modify.
    For more information, please refer to this site:
    "Access is denied." error in Infopath 2007 form + ASMX: http://us.generation-nt.com/answer/access-denied-error-infopath-2007-form-plus-asmx-help-65808252.html
    Please remember to click 'Mark as Answer' on the answer if it helps you

  • "general access denied error" while implementing out-of-process COM Server Implementation in Windows Phone 8.1

    I have a Service (.exe) where I was registering for my COM Component like below
    CoInitializeEx(NULL, COINIT_MULTITHREADED);
    HRESULT hres = CoInitializeSecurity(NULL, -1, NULL, NULL, RPC_C_AUTHN_LEVEL_NONE, RPC_C_IMP_LEVEL_IMPERSONATE, NULL, EOAC_NONE, 0);
    if (hres != S_OK)
    OutputDebugStringA("Security Descriptor not initialized");
    ITypeLib* pTypeLib;
    HRESULT hr_1 = LoadTypeLibEx(L"ServiceIdl.tlb", REGKIND_REGISTER, &pTypeLib);
    if (pTypeLib != NULL)
    pTypeLib->Release();
    RegisterServer(L"Service.exe", CLSID_classAImpl, L"ClassAImpl Sample", L"Component.ClassAImpl", L"Component.ClassAImpl.1", 0);
    g_hEvent = CreateEvent(NULL, FALSE, FALSE, NULL);
    DWORD reg = 0;
    IClassFactory *pIFactory = new classAFactory;
    HRESULT hr0 = CoRegisterClassObject(CLSID_classAImpl, pIFactory, CLSCTX_LOCAL_SERVER, REGCLS_MULTIPLEUSE, &reg);
    if (FAILED(hr0))
    OutputDebugStringA("classAImpl is not registered");
    CoUninitialize();
    exit(1);
    HRESULT hr1 = CoResumeClassObjects();
    if (hr1 == S_OK)
    OutputDebugStringA("classAImpl is Resumed Registering");
    WaitForSingleObject(g_hEvent, INFINITE);
    CloseHandle(g_hEvent);
    CoRevokeClassObject(reg);
    pIFactory->Release();
    CoUninitialize();
    From Client Code I am CreatingInstance  Like Below
    COSERVERINFO si;
    MULTI_QI qi;
    COAUTHINFO cai = { RPC_C_AUTHN_NONE, RPC_C_AUTHZ_NONE, 0, RPC_C_AUTHN_LEVEL_NONE, RPC_C_IMP_LEVEL_IMPERSONATE, 0, EOAC_NONE };
    si.dwReserved1 = 0;
    si.pwszName = L"\\\\localhost";
    si.pAuthInfo = &cai;
    si.dwReserved2 = 0;
    qi.pIID = &IID_classA;
    qi.pItf = NULL;
    qi.hr = 1;
    CoInitializeEx(NULL, COINIT_MULTITHREADED);
    HRESULT hr = CoCreateInstanceEx(CLSID_classAImpl, 0, CLSCTX_LOCAL_SERVER, &si, 1, &qi);
    hr returning error "general access denied error";

    I think we may run into the limitations mentioned in the remarks of CoCreateInstanceFromApp doc(show as below). If you can provide a repro project, I
    can give you more details about what happens.
    The CoCreateInstanceFromApp function reads class registrations only from Fusion contexts and manifests, and from the HKLM\SOFTWARE\Classes\CLSID registry hive.
    Only built-in classes that are supported in the app container are supplied. Attempts to activate unsupported classes, including all classes installed by 3rd-party code as well as many Windows classes, result in error code
    REGDB_E_CLASSNOTREG.
    The CoCreateInstanceFromApp function is available to Windows Store apps. Desktop applications can call this function, but they have the same restrictions as Windows Store apps.
    If you are trying to call some windows classes in your library, I will suggest you check how to create windows runtime out of process component by viewing
    this sample. This is what I usually do.
    To be honest, I did not try to implement the out of process COM component using the method you tried as we previsouly do on desktop. I will suggest you try to register a very simple library(like a signle class and single interface which returns an integer),
    and see if it will work.
    <THE CONTENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS OR IMPLIED>
    Thanks
    Alan Yao
    MSDN Community Support
    Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and makes it easier for other visitors to find the resolution later.

  • Two forests trusted "Access denied error" while RDP

    Hi Everybody,
    I have two forests 
    for ex:
    TestA & TestB
    I have created one Global group called "XYZ" in 'TestA' forest and added the users. 
    Both the forests are trusted. 
    In 'TestB' forest i have two servers. Computer1 & Computer2
    I have added "XYZ" group from "TestA" to Local administrators group of "TestB" and these groups are in restricted groups.
    Iam able to access upn \\computer1\C$ from TestA forest. But when i am trying to RDP to "Computer1" iam getting Access Denied error.
    Computer1 is (2008 R2) and forest & domain functional lever is 2003
    Kindly advise on this issue.
    Thanks!!

    Hi,
    I assume you don't have RDSH role installed.
    Have a look here
    This post is provided AS IS with no warranties or guarantees, and confers no rights.
    ~~~
    Questo post non fornisce garanzie e non conferisce diritti

  • Error while trying to install Oracle 8.15 on Redhat 6.1

    I have been trying to install Oracle 8i (8.15) on my machine but I got an error while trying to run runInstaller:
    Initializing java virtual machine from /usr/local/jre/bin/jre. Please wait
    Error in CreateOUIProcess(): -1
    : Bad Address
    FYI:
    - I downloaded the Oracle 8i from the technet download site (I am not using a CD)
    - I am using Redhat 6.1
    - I downloaded and installed JRE as advised in the documentation.
    - My machine is a AMD K6, so is non-intel but I have not noticed any other problems using Redhat.
    - I currently only have 96MB RAM as opposed to the recommended 128MB.
    Please Help!!!
    null

    (All comments are based on redhat 6.0, not sure about other distros)
    If u are only using one linux machine, then I don't think you need to have 'DISPLAY' defined. Unset it then. This variable tells X clients where to display its X output. If unsetting does not make it work, then try 'export DISPLAY=ip_address:0.0' and then 'xhost +ip_address', where ip_address is the IP of your machine, or try 127.0.0.1.
    If u have two linux machines, like what I did:
    * Ran X on client machine (192.168.0.2).
    * Telnet to server machine (192.168.0.1 - where 8i will be installed), login as 'oracle'
    * On the telnet session, I 'su' as root then mounted the CD, then 'exit' to return to the 'oracle' login on the telnet session.
    * On the telnet session, I did 'export DISPLAY=192.168.0.2:0.0' - telling it that all X clients on this telnet session will send its X output to the host on 192.168.0.1.
    * On the client machine (where X is running), opened another shell, did a 'xhost +192.168.0.1' - telling the X server on the client machine to accept X connections from the server machine (192.168.0.1).
    * Went back to the telnet session to the server machine, then ran the installer.
    In short, everything you do can be done remotely, apart from putting the CD on the server machine.
    The installer runs on the server but send its output to the client.
    null

  • Error while trying to install SAP 8.8 Pl 10 Server on Windows 7

    Hellow All,
                       I am facing the problem while trying to instal the Server and Server Tool os SAP 8.8 Patch Level 10 on the windows server.It is displaying the error failed to installed:1628 error evertime I try to run the Server Installer.
    regards,
    pankajk

    Dear,
    Check the below link:
    https://websmp106.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000705857&_SCENARIO=01100035870000000183&_ADDINC=011000358700001192682007E&
    https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1434624&nlang=E&smpsrv=https%3a%2f%2fwebsmp110%2esap-ag%2ede
    Thanks,
    Neetu

  • Access denied error while uploading the document into document library which is associated with a content type

    hi,
     am trying to upload a document in a document library which is associated  with content types [ the content type contains 10 site columns and one of them is taxonomy field]. i added this content type in the document library.
    this document library is residing in a team site which is saved as a template and  based on this template i have created sub sites.
    and when i tried to upload a file to the doc lib, it throws me "access denied error".
    what may be went wrong .
    any help is  appreciated!

    Access denied indicates the user account uploading the file doesn't have access to the library, or sometimes it means there's already a document in the library with the same name that was never checked in. It's also possible that your template contains
    custom code that tries to do something that is not allowed.
    Kind regards,
    Margriet Bruggeman
    Lois & Clark IT Services
    web site: http://www.loisandclark.eu
    blog: http://www.sharepointdragons.com

Maybe you are looking for

  • Windows 8.1 is not activated

    Hi, Recently I bought  HP 15-g049AU, but the thing is in properties its showing windows is not activated. Can anybody please tell me how do I activate windows 8.1?

  • Re: Satellite Pro M70 - High CPU Usage - Low Performance

    I sincerely hope someone can help. I do not consider myself really computer illiterate, but this is where my understanding ends and I would truly value all help offered. I have a Toshiba Satellite Pro M70 of 2 yrs old and I am a definite advocate for

  • Upload 'Numbers' file, how?

    Greetings, Trying to upload a Numbers file i made on my MBP by loggin-in on: iCloud > iWork > (radar symbol) > upload spreadsheet i get the option to choose the file. I choose the file by selecting and get this: Noone of these parts of the files are

  • How to write data/result in excel or external data source in c#??

    Hello Team, I have automation framework in c#. So there are multiple testmethod and testclasses.....so i havt to write result of every testmethod ...in below format..in excel  [TestMethod] public void Demo() WriteIntoExcel("TestClassName","Testmethod

  • Should I keep replacement SIM card?

    Just replaced my 4s for technical problems with the same model (insurance claim)  The new phone came with a SIM card, which I replace with the one from my old phone, is this other card any good for anything? The directions say they just want the old