Access Denied in Data Protector 8 display when trying to view Devices and Media in the UI

I installed Data Protector 8 User Interface from the program disk on some Windows Office 7 Lap Tops for my staff. When they try to view Devices and Media, they get Access Denied.
I see other consumers post this issue and it is a bug in Data Protector 8.
Is there a fix for this issue?

except that if it could publish to both swf/html5 today my project would run on desktop. Again the swf would help for running the desktop version of the project and mobile devices of course would pick html5.
one - what seems to you does not need to seem to me hence ur own assumption
two - I'm asking for advice and help, if you can please do if you can't no need to get personal
Thank you

Similar Messages

Error when trying to view reports or manually processing the TFS data warehouse and analysis services cube

Hello Guys,
I am trying to configure the reporting for TFS using SQL Server. But I get following error when viewing any report:
So I try to manually process the cube to check if it works. I am following this article: https://msdn.microsoft.com/en-us/library/ff400237.aspx
When I click on GetProcessingStatus and invoke it (with last field set as TRUE) I get following error:
Please advice as to how to resolve this issue and be able to see the reports.

I have managed to resolve this issue. Note that for all purposes of this question and answer, mydomain\tfsadmin is a generic user (used to install all software). This is a proof of concept account, for test purposes
The thing is that while installation of the SQL Analysis service I had given the username: mydomain\tfsadmin (a generic user for testing) as the Analysis service administrator, instead of the 'Domain admin' group.
Still I have managed to resolve this issue.
Steps:
1. Make sure that the user (mydomain\tfsadmin) is a member of Analysis Server -> TFS_Analysis db -> Roles -> TFSWarehouseAdministrator and TFSWarehouseDataReader. (This actually happens automatically when you run the TFS Admin console and configure
reporting and provide the username that will access the Analysis db, etc. In my case the user is 'mydomain\tfsadmin')
2. It is a bad practice to manually process the cube (you can do this is make sure that there are no errors, but only after completing the following steps till step 5)
3. Also make sure that NT AUTHORITY\NETWORK SERVICE is member of the Analysis db -> Roles -> TFSWarehouseAdministrator ->
this will resolve the error which appears in the 2nd screenshot in the question.
4. Then you can right click on the Analysis db and run process. If this is throwing error as shown in above reply of mine, then you need to follow https://msdn.microsoft.com/en-us/library/vstudio/ff400237.aspx
a. http://localhost:8080/tfs/TeamFoundation/Administration/v3.0/WarehouseControlService.asmx
b. Choose
ProcessWarehouse, run it.
c. Choose ProcessAnalysisDatabase, type 'Full' and run it.
d. Choose GetProcessingStatus,
enter 'TRUE' in last field and run it.
e. I don't get any errors at this point.
5. Now you can connect to the Analysis server via SQL Mgmt Console, right click on Analysis db (TFS_Analysis) and click Process. It all works good.
6. Now you can browse to the report URL (to get this URL you can open Team explorer 2013, connect to you team project, on RHS click 'Reports', Click 'Go to Site'.
DONE.

Error displaying when trying to view the screens

Hi All,
when a user is trying to view the screens in the portal he is getting a message saying "wp integration . js could not find capwf_send sess info () to send bbpsc07ssess info to dsm portal dsm - interface might have changed"
what settings must be done to avoid this mesage in portal or in r/3
anyone tell me how to resolve this.
urgent issue.
vv

I sometimes get this message when compiling my projects outside of RH (using Far HTML tool for example). Generally, for me this occurs when the compilation fails with errors for some reason or freezes up, so that the compiled file is broken. Again, I don't think I've experienced this problem with RH itself compiling my files, but for what it's worth, here's some things to try.
Create a backup of your help project before proceeding:
Sometimes the MS help compiler doesn't like to be buried far down in a directory structure. Try copying your project directory up to your root drive level and recompile there. Or maybe set your output file to a dir at the root level.
Sometimes there's an issue with an .htm file name that the compiler doesn't like (an odd character etc). That's harder to find. What I do is systematically strip out half of the documents, recompile and see if that solves it, removing or adding back in as necessary to find the problem file.
It may be that there's a problem in the HHC or HHK file. I've had odd problems where our translators will mess tags up, like leaving out a needed closing </OBJECT> tag was missing in the HHC or something that caused the compiler to fail. Try compiling without an index or contents tab and see if that fixes it. If it does, you know that one of those files is causing the problem.
I don't know if there's one set solution to the problem because I think this can be caused by different things. What I would probably do is create a brand new RH project and then import files from your old one into your new one a few at a time, recompiling as I go to try to track down where the error occurs. Once you find a problem, check the file name to make sure there's no odd characters. Sometimes even a dash character (-) can sometimes cause problems. I try to stick to underscores and alphanumeric chars only.
Good luck!

HI - new mac user. When trying to view clips on certain sites i receive the following text: "missing plug in" can anyone assist?

HI - new mac user here
When trying to view certain sites i receive the following text: "missing plug in" can anyone assist?
I think it is related to viewing video or clips.....

Well, if you're using Chrome, or Firefox go here this should also work with Safari. It will let you know if Flash is already installed in your browser. If your using Chrome it should have been intergrated. Were you able to get Flash installed so you can view video clips? Post back to let us know. Hope this helps. Also install Perian. See if that helps as well.
Joseph

Regarding UCF_AcroForm error displayed when trying to open the pdf form

Hi,
Iam receiving the pop up when trying to open the pdf form.The Error is Server Error Class: UCF_AcroForm Method: Error.The Error displayed in some system and in some other system the form is working fine.The Form is created using the Designer 8.0.The form is working fine in reader 8.0.Is there any problem in the reader version.Is there any solution for this problem please provide.
Thanks and Regards,
SatheshKumar R

Sathesh,
Similar issue has been reported at SDN so searching would have helped you. See below threads for solutions:-
UCF_AcroForm error
MSS UCF_AcroForm error displayed when trying to display form in PCR
Chintan

OSStatus error -19000 isi displayed when trying to open .wmv file

Hi,
I am unable to open this .wmv file with any application I have including QT X, QT 7, WMV player4mac, or VLC. The following message is displayed when trying to open with QT: OSStatus error -19000. Can anyone help on how to open this file, and/or what the error msg means. thanks heaps.

Welcome to the forums!
Download and install the free Flip4Mac WMV Player from http://www.telestream.net/flip4mac-wmv/overview.htm (Windows Media Player for the Mac is no longer supported, even by Microsoft)

I cannot import my AVCHD files by using log and transfer. I can see all the files, but when I add the file to import que it doesnt work, the status is a red (!) and says that its no data. I have tried with different cards and different cardreaders, but it

I cannot import my AVCHD files by using log and transfer. I can see all the files, but when I add the file to import que it doesnt work, the status is a red and says that its no data. I have tried with different cards and different cardreaders, but it is still the same. Why?!

Please give us more specific information -
What make/model camcorder are you using?
Are you absolutely certain this is AVCHD video? Tell us more about the video settings you used in the camcorder (eg, frame size, frame rate, quality level)
Why are you attempting Log & Transfer from a card reader instead of from your camcorder? Have you tried doing Log & Transfer from your camcorder?
Are the SD cards straight from the camcorder, unaltered, or are you just using the cards as storage?
Are you using FCE 4.0 or FCE 4.0.1?

When I want to play music out loud the volume bar disappears and it won't play music or any sound. This sometimes happens with head phones in aswell. How do I fix it? I have tried to reset settings and wipe all the data of it but it didn't work.help!

When I want to play music out loud the volume bar disappears and it won't play music or any sound. This sometimes happens with head phones in aswell. How do I fix it? I have tried to reset settings and wipe all the data of it but it didn't work.help!

Although you say you have let the battery drain, was it for long enough? Since nothing else that you've tried so far has worked, I suggest that you leave the iPod unplugged for at least four days, preferably a week. That way, if something is stopping the iPod from turning the screen on, then whatever it is will drain the battrey. However, since the screen isn't on, that may take longer than if the screen was on.
Then, after that time, plug the iPod into a power source and leave it alone for at least thirty minutes. Only after thirty minutes will it show any signs of life, but you should leave it until it is fully charged before trying to use it.
If you get to this stage, the fact that the battery has drained will cause the iPod to reset when it springs back to life.
Let us know how you get on.

Hi. I am using a time capsule for few PC s. I have made 5 different account to access time capsule. but in windows when i enter account name and password for one account, i cannot access other accounts, because windows saves username

Hi. I am using a time capsule for few PC s. I have made 5 different account to access time capsule. but in windows when I enter account name and password for one account, i cannot access other accounts, because windows saves username. how can i prevent this from happenning. I really need to access all my accounts and dont want it to save automaticlly.

Why have 5 accounts if you need to access all of them.. just have one account?
Sorry I cannot follow why you would even use the PC to control the Time Capsule. Apple have not kept the Windows version of the utility up to date.. so they keep making it harder and harder to run windows with apple routers.

Palm Desktop shuts down when trying to view calendar by month

I'm using a Palm TX with the latest edition of Desktop installed (I think that's 6.2). Everything is normal except, suddenly, I cannot view my calendar in monthly view. Daily, weekly and yearly all work fine. Desktop shuts down when trying to view in monthly view. I did a system restart, a Desktop reinstallation, a download of the latest version and installation of that version and, finally, uninstallment of the existing Desktop, download of the newest version and installation of that version. Nothing seems to enable me to view the calendar in monthly view. This is a spontaneous event. I've been running Desktop on a Vista Ultimate system since February without incident. I have no idea about how to solve this.
Thanks
Post relates to: Palm TX

Well, here's where we are now. It's a good thing that I have desktop on my office computer because when I tried a Hotsynch with my home desktop, Hotsynch wiped out all the data on my handheld and then hung up both the handheld and desktop in the middle of the Hotsynch. I'm going to overwrite the entire handheld with the office desktop file. As for the home setup, I'm thinking the only thing I can do now is uninstall Palm and wipe out the entire directory of files. Am I correct about this? Do I need to do a clean uninstall?
Post relates to: Palm TX

When trying to install an Adobe extention, during the installation process I get a message that says "This extention cannot cannot be installed-----requires version 13.0 or greater." I am installing from within CC

When trying to install an Adobe extention, during the installation process I get this message-----"This extention cannot be installed----requires version 13.0 or greater." I am installing through Photoshop CC------appreciate any help.

Hi Gary. Extensions have to be written for the specific Photoshop versions they are designed to run on.and definitely don't all run on every version of Photoshop. You'd think that you'd be OK with that message, but it might be that it works fine on CS6 (13) but not on CC (14).
But it could be an error.
What is the extension you are trying to install? Is Photoshop, and Extension Manager fully up to date? If you are sure that the extension runs on CC, I'd try un installing, and reinstalling the Extension Manager. I have had to exactly that a while back.

HT1694 My hotmail access disappeared from my iPad. When I go to settings and click 'mail, contacts, calendars' the page freezes. It doesn't allow me to the account setting. Anyone have suggestions?

My hotmail access disappeared from my iPad. When I go to settings and click 'mail, contacts, calendars' the page freezes. It doesn't allow me to the account setting. Anyone have suggestions?

Your Settings app is crashing. Sometimes, the only way to fix this is by restoring the iOS software but hopefully it will not come to that.
1. Quit the app completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
2. Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
3. You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.

When I try to update an app in the App Store i get a message "There was an error in the App Store. Please try again later. (13)" I have tried many many times and keep getting the same message. How do I resolve?

When I try to update an app in the App Store i get a message "There was an error in the App Store. Please try again later. (13)" I have tried many many times and keep getting the same message. How do I resolve?

First take the steps recommended in this support article. If there's no change, continue as follows.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Cookies/com.apple.appstore.cookies
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Quit the application if it's running. Move the selected item to the Trash. Relaunch the application and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Can see list of old emails, but error message when trying to view message.

Ok, after a Mail crash (10.4.1), there were no accounts listed and of course no old emails, sent or in the inbox, were visible.
We reentered all the account info, as if we were starting anew, and now we are able to see the list of all old emails in the inbox and sent mailbox, but when we click on any message before the crash, we get this error message:
The message from David Crandon, ([email protected]), concerning (the subject of the email), has not been downloaded from the server. You need to take the account online in order to download it.
Now, obviously, the accounts are online because we can send and receive new emails with no problem, and of course, the old emails aren't going to be on the server anymore.
Can anyone help?
Thanks.

Well, didn't work. I spent an hour and a half just trying to get my 76yr old uncle to back able to drag and drop into the correct folder, and then trying to find the file when he didn't....!
Anyway, it didn't work. After removing the Envelope Index file, and reimporting the messages, everything was the same. He could still see all his old emails in the list in Mail, but got the same error message when trying to view them.
Then, we rebuilt the inbox, and now none of his old messages are visible! However, they are still on the computer.
All his old emails are ".emlx" files and if we click directly on one of them, then Mail will launch and display the message properly in it's own window. But again, we get the above error message if we try to view it by selecting it from the message list in mail.
One interesting thing...in the Library->Mail folder their are two folders, "Mailboxes" and "Mailboxes.mbox". Both at the same level. It's the Mailboxes.mbox folder that has all his old emails. Although all the old ones have the suffix ".elmx". In the Mailboxes folder are all the new emails since we reset all the prefs in Mail after the crash a couple of days ago.
Anymore help please to get mail to recognize all these old emails?
Thanks,
David

When Trying to View an .mov File, PSE 8.0 Crashes... Help

When Trying to View an .mov File, PSE 8.0 Crashes... Help I was able to view these .mov files without any problem on ACDSee 2.5, any help will be appreciated to determine why .mov files crashe in the PSE 8.0 viewer....
Best Regards,
Larry

Thanks for the reply Larry. This is frustrating, and Adobe support is useless. It all works on my vista 64 bit system, but not on the 32 bit system. The odd thing is that I can open .mov files in Editor by going to File-Import from video, select "all file types" and choose a quicktime movie and it will open and run just fine. I can take stills off the movie. But if I try to open the same movie file with File-Open...I get an error message "Cannot open file......wrong file type" In organizer everything just crashes. I suspect there are some security issues in Vista that won't allow PSE to access Quicktime.
Too bad Windows 7 didn't fix the problem. I was starting to head that way. I will let you know if I find a solution.
Ron

Access Denied in Data Protector 8 display when trying to view Devices and Media in the UI

Similar Messages

Maybe you are looking for