Access denied macintosh hd while in bootcamp-win7

hi!
i'm a new mac user and obviously i need some help
i 've recently installed windows 7 on bootcamp in order to run 3ds max. i also installed PARAGON HFS+ 10.0 for Windows and i was able to save my max files on my macintosh partition.
i also had installed PARAGON NTFS on mac in order to be able to read/write on my old external drives that used to work on windows and all worked fine!
today i made some changes (cmd orders) in order to activate windows and i don't know if that caused the problem but now i don't have acces to my mac drive when i'm using windows.
It is visible but when i try to open it says it is not accessible/does not contain a recognized file system/need to format the disk!!!
when i unistall Paragon hfs+ i have only read acces to my mac partition and when i reistall it again...access denied
what's wrong with it?
can someone help me please?
thanks in advance

If you installed Windows and the Boot Camp support files, you will only have read-only access to the files on the Mac Partitions (and if you didn't install the Boot Camp support files, you wouldn't even have read access).
If you want full read/write access to your MacOS partitions, then you will need to install a third party utiltiy for that. I am aware of 2 such commercial tools: Media4's "Mac Drive" and Paragon's "HFS+ for Windows". Both tools seem to work well, but a few years ago I made the switch from the Media4 software to Paragon's because of minor things that annoyed me. The Paragon software integrates more into the Windows file systems drivers and you can treat the partitions like any other. This was a nice feature which caused me to switch my 4 licenses from Media4 to Paragon...

Similar Messages

Regedit Permissions -"Access Denied" or "Error while deleting key" EVEN AS ADMIN!

Anyone tried deleting a registry key in Windows 7? Got "access denied" or "Error while deleting key"?
The usual response is, "You need to run regedit as an administrator". but I *AM* logged in as Administrator, and running regedit as administrator, trying to assign administrator full permissions on that registry key in order to delete it!!
Am I mistaken, or isn't Administrator supposed to be able to administer and control all the settings on the computer, in order to set it up for the "Average Joe" user?
So, under the permissions menu of that key, go to advanced, change the owner from System to Administrator, and try again. It's no longer saying "access denied", but "Cannot delete xxxxxx. Error while deleting key".
The scenario: Basically, the wireless has stopped working on a laptop. The device does not show up in Device Manager, but is in the registry, so the normal procedure is to delete the registry entry for the device in HKLM/System/CurrentControlSet (and /ControlSet001) /Enum/PCI ,then attach the device or restart the computer, it finds the "new" hardware and reinstalls it. Easy!...
Not with permission restrictions on the administrator account it's not! So I need to give myself permission, to give myself permission, to do a simple task like delete a single registry key! Why, Microsoft, why???!!! Please just make the Administrator account a hidden "God mode" account that can do anything, and make the lives of us techies much easier in the process!
/RANT
Now, where did I put that XP disc?!....

Hi,
I explain you:
Administrator does not mean "you get all rights to do anything." Administrator happens to be an account (or in your case, most likely the Local Administrators group) which by default is given some sensitive privileges like SeDebugPrivilege and
similar. However, as far as the security subsystem is concerned, it is just an account. (Very much unlike root in
Unix-like operating systems) If you aren't the owner of the key in question, and your account does not have WRITE_DAC access
to the registry key in question, then you won't be able to change the access control list on the key in question.
Try taking ownership first. By default, the local administrators group has SeTakeOwnershipPrivilege,
which allows taking ownership of any object even without the WRITE_OWNER permission
being granted by the object's discretionary access control list. Once you are the owner, you should be implicitly granted READ_CONTROL (which
allows you to read the security descriptor on the object in question), and WRITE_DAC (which
allows you to write to the DACL on the key in question). (Assuming the OWNER_RIGHTS SID
isn't in use; that's extremely unlikely)

"Access Denied" DVD DL Encores CS4 in Win7 64b

Hello, I am new to this forum, so please bear with me on this. I, like others, have bounced off the "access denied" error when burning dvd+r dl in Encore CS-4. I did attempt the fix listed for vista, but I am using Win7 and have not been able to get it to work. Any solutions. Much appreciated. CR

I, too, am running into this problem. My files were on an external drive and so I had hoped this was the pro
blem but I just transfered to an internal SATA and re-created the project and I am still getting this error.
I would prefer to not have to use yet another program to create my DL DVD as Encore is supposed to be able to support this.
I am running win7 64b OS as an administrator and have all the latest CS4 updates. Help!

[SOLVED] mount.nfs4: access denied by server

Hi folks. I seem to be having a bit of a problem getting nfs4 to work. I am trying to mount a share from alpha (my fileserver) onto charlie (my workstation). Both of these are new Arch systems and I haven't had any nfs working yet, although I have with other distros on the same hardware.
Fileserver (alpha) config:
# /etc/exports
/files 192.164.1.0/24(rw,sync,fsid=0,no_subtree_check)
# /etc/hosts.allow
sshd: 192.168.1.0/255.255.255.0
nfsd: 192.168.1.0/255.255.255.0
rpcbind: 192.168.1.0/255.255.255.0
mountd: 192.168.1.0/255.255.255.0
idmapd: 192.168.1.0/255.255.255.0
statd: 192.168.1.0/255.255.255.0
[General]
Verbosity = 3
Pipefs-Directory = /var/lib/nfs/rpc_pipefs
Domain = localdomain
[Mapping]
Nobody-User = nobody
Nobody-Group = nobody
[Translation]
Method = nsswitch
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults 0 0
#/dev/cdrom /media/cd auto ro,user,noauto,unhide 0 0
#/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0
#/dev/fd0 /media/fl auto user,noauto 0 0
/dev/sda1 /boot ext3 defaults 0 1
/dev/sda2 swap swap defaults 0 0
/dev/sda5 / ext3 defaults 0 1
/dev/sda6 /var ext3 defaults 0 1
/dev/sda7 /home ext3 defaults 0 1
/dev/sda8 /files ext3 defaults 0 1
rpc_pipefs /var/lib/nfs/rpc_pipefs rpc_pipefs defaults 0 0
nfsd /proc/fs/nfsd nfsd rw,nodev,noexec,nosuid 0 0
DAEMONS=(syslog-ng network netfs rpcbind nfs-common nfs-server hal @alsa @crond @openntpd @sshd)
[root@alpha ~]# df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda5 19228276 879492 17372036 5% /
none 507792 140 507652 1% /dev
none 507792 0 507792 0% /dev/shm
/dev/sda1 93307 15887 72603 18% /boot
/dev/sda6 19228276 372632 17878896 3% /var
/dev/sda7 19228276 176224 18075304 1% /home
/dev/sda8 902688436 204872 856629640 1% /files
[root@alpha ~]#
Workstation (charlie) config:
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults 0 0
#/dev/cdrom /media/cd auto ro,user,noauto,unhide 0 0
#/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0
#/dev/fd0 /media/fl auto user,noauto 0 0
UUID=437982b2-5c84-4f53-954d-cf43f8b4e707 / ext3 defaults 0 1
UUID=97d79d76-357a-4f4e-8513-f181bff6af62 /boot ext3 defaults 0 1
UUID=d8525095-9b97-4439-932f-8f4e0236cce1 /home ext3 defaults 0 1
UUID=ffba933b-af93-407c-b1b8-69d1cc5be146 swap swap defaults 0 0
rpc_pipefs /var/lib/nfs/rpc_pipefs rpc_pipefs defaults 0 0
alpha:/ /files nfs4 defaults 0 0
[General]
Verbosity = 3
Pipefs-Directory = /var/lib/nfs/rpc_pipefs
Domain = localdomain
[Mapping]
Nobody-User = nobody
Nobody-Group = nobody
[Translation]
Method = nsswitch
DAEMONS=(syslog-ng network crond alsa hal fam rpcbind nfs-common netfs)
[root@charlie ~]# mount -a
mount.nfs4: access denied by server while mounting alpha:/
[root@charlie ~]#
This happens even after both systems are rebooted. Can anyone spot what I am missing?
Thanks for looking.
Last edited by dgregory46 (2009-10-21 01:04:09)

Now I really feel stupid. A little proofreading would have saved me a big headache. In /etc/exports I was exporting to 192.164.1.0/24 while my network is the more standard 192.168.1.0/24.
It works fine now, although I did take phaul's suggestion and added my main share "inside" the nfs4 root.

Mount.nfs: access denied

Hi,
I've been trying the very basic NFS configuration, using ArchWiki.
/etc/hosts, client side:
# /etc/hosts: static lookup table for host names
#<ip-address> <hostname.domain.org> <hostname>
127.0.0.1 rimfirebox localhost.localdomain localhost
::1 rimfirebox localhost6.localdomain6 localhost6
192.168.1.34 rimfirebox.localdomain rimfirebox
192.168.1.33 stovepipebox.localdomain stovepipebox
# End of file
Server:
hosts.allow:
# /etc/hosts.allow
nfsd: ALL
portmap: ALL
mountd: ALL
# End of file
hosts.deny:
# /etc/hosts.deny
ALL: ALL
# End of file
/etc/exports:
# /etc/exports
# See exports(5) for a description.
# use exportfs -arv to reread
#/export 192.168.1.10(rw,no_root_squash)
/home/alexey/common *(ro,sync)
The required directory is apparently exported, but "access denied":
[alexey@rimfirebox ~]$ showmount -e stovepipebox
Export list for stovepipebox:
/home/alexey/common *
[alexey@rimfirebox ~]$ sudo mount stovepipebox:/home/alexey/common /mnt/stovepipe
mount.nfs: access denied by server while mounting stovepipebox:/home/alexey/common
Where am I supposed to look?
Last edited by Llama (2011-01-17 08:03:31)

My studies turned up that there's NFSv4 there .
https://wiki.archlinux.org/index.php/Nfs
https://wiki.archlinux.org/index.php/NFSv4
https://help.ubuntu.com/community/NFSv4Howto
So I've made another go:
/etc/exports:
# /etc/exports
# See exports(5) for a description.
# use exportfs -arv to reread
#/export 192.168.1.10(rw,no_root_squash)
/export 192.168.1.34(rw,fsid=0,insecure,no_subtree_check,async)
/export/alexey 192.168.1.34(rw,nohide,insecure,no_subtree_check,async)
/etc/fstab:
/home/alexey /export/alexey none bind 0 0
/etc/idmapd.conf:
[General]
Verbosity = 0
Pipefs-Directory = /var/lib/nfs/rpc_pipefs
Domain = localdomain
[Mapping]
Nobody-User = nobody
Nobody-Group = nobody
[Translation]
Method = nsswitch
My first question: what my Domain actually is? Do I have to change it to something from my /etc/hosts? Do I have to mend /etc/hosts or something else?
Starting server:
[alexey@stovepipebox ~]$ sudo /etc/rc.d/rpcbind start
:: Starting rpcbind [DONE]
[alexey@stovepipebox ~]$ sudo /etc/rc.d/nfs-common start
:: Starting rpc.statd daemon [DONE]
:: Mounting pipefs filesystem [BUSY] :: Starting rpc.idmapd daemon [DONE]
[alexey@stovepipebox ~]$ sudo /etc/rc.d/nfs-server start
:: Mounting nfsd filesystem [DONE]
:: Exporting all directories [DONE]
:: Starting rpc.nfsd daemon [DONE]
:: Starting rpc.mountd daemon [DONE]
Is the [BUSY] thing OK?
Client side:
[alexey@rimfirebox ~]$ showmount -e stovepipebox
Export list for stovepipebox:
/export/alexey 192.168.1.34
/export 192.168.1.34
[alexey@rimfirebox ~]$ sudo /etc/rc.d/rpcbind start
Password:
:: Starting rpcbind [DONE]
[alexey@rimfirebox ~]$ sudo /etc/rc.d/nfs-common start
:: Starting rpc.statd daemon [DONE]
[alexey@rimfirebox ~]$ sudo mount -t nfs4 stovepipebox:/ /mnt
mount.nfs4: No such device
Here I at the very least have no clear idea what names to use. Please, help.
Last edited by Llama (2011-01-23 17:19:02)

OEL 6.3 - mount.nfs: access denied by server

Hi,
I am trying to mount an NFS directory on a server running OEL 6.3, pointing to another OEL 6.3 server. I get the following error:
[oracle@csdowmsdb503 etc]$ mount 192.x.x.x:/home/oracle/m501/m501_f /home/oracle/m501_f/
mount.nfs: access denied by server while mounting 192.x.x.x:/home/oracle/m501/m501_f
The UIDs and GIDs on each server match. If we use "nfsvers=3" it work, so it seems to be something specific to vers 4. We would like to not use the vers 3 workaround.
Thanks!

Hi,
When I added "- v" I realized it is actually erroring out on vers=4 and defaulting to vers=3 instead. The error it shows is now "No such file or directory."
[oracle@xxx503 m501_g]$ sudo mount -v -t nfs xxx.xxx.xxx.35:/home/oracle/m501/m501_g /home/oracle/m501_g/
mount.nfs: timeout set for Fri Nov 9 10:46:27 2012
mount.nfs: trying text-based options 'vers=4,addr=xxx.xxx.xxx.35,clientaddr=xxx.xxx.xxx.37'
mount.nfs: mount(2): No such file or directory
mount.nfs: trying text-based options 'addr=xxx.xxx.xxx.35'
mount.nfs: prog 100003, trying vers=3, prot=6
mount.nfs: trying xxx.xxx.xxx.35 prog 100003 vers 3 prot TCP port 2049
mount.nfs: prog 100005, trying vers=3, prot=17
mount.nfs: trying xxx.xxx.xxx.35 prog 100005 vers 3 prot UDP port 37692
xxx.xxx.xxx.35:/home/oracle/m501/m501_g on /home/oracle/m501_g type nfs (rw)

Access denied while opening any PDF the second time / Zugriff verweigert beim zweiten Öffnen eines beliebigen PDF

Reader produces "Access denied" while opening any PDF the second time. A LogOut/LogIn or restart is necessary to open a PDF again successfully. User works with a PC (Win7). The file is located on the desktop in a Windows 2008/2012 AD, user profile on networkshare. The same procedure with a file located on any other networkshare or locally on harddisk works without error. Analysis with processmonitor indicates that the file seems to load and then is cancelled for some unknown reason. The problem is somehow growing, beginning with 1 PC and exists now also in our Citrix environment (2 users). Access rights seem to ok and the same on all tested shares (full Access or Change rights).
Der Reader bringt den Fehler "Zugriff verweigert", wenn man das zweite mal ein PDF öffnen will. Dabei ist der Fehler völlig unabhängig davon, ob man das gleiche oder ein anderes PDF öffnen will. Um wieder erfolgreich ein PDF zu öffnen, ist ein Ab- und Anmelden bzw. ein Neustart des PCs (Win7) nötig. Umgebung ist eine Windows 2008/2012 AD, Profil liegt im Netz. Der Fehler tritt nur bei PDFs auf, die auf dem User-Desktop liegen. Sind die Dateien irgendwo anders im Netz oder lokal auf der Festplatte, kommt der Fehler nicht. Eine Analyse mit dem Prozessmonitor zeigt, dass das Laden des PDFs irgendwann gecancelt wird, warum auch immer. Das Problem scheint sich auch langsam auszuweiten. Es hat mit einem PC begonnen und tritt nun auch in unserer Citrix Umgebung bei bis jetzt 2 Usern auf. Die Berechtigungen scheinen überall ok und gleich zu sein (Volluzgriff oder Ändern).

ls -l /var/run/lighttpd/
And how are you spawning the php instances? I don't see that in the daemons array anywhere.
EDIT: It looks like the info in that page is no longer using pre-spawned instances, but lighttpd adaptive-spawn. The documentation has been made inconsistent it looks like.
You will note that with pre-spawned information, the config looks different[1].
You need to do one or the other, not both (eg. choose adaptive-spawn, or pre-spawn..not both).
[1]: http://wiki.archlinux.org/index.php?tit … oldid=8051 "change"

Access denied error while writing a file to the file system - myfileupload.saveas() throws system.unauthorizedexception

hi,
as part of my requirement , i have to perform read and write operations of few files [ using the file upload control in my custom visual web part] and on submit button click.
but while writing these files - with the help of fileupload control - and when i use myfileupload.saveas(mylocation);
- i am saving these files into my D:\ drive of my server , where i am executing my code -, am getting access denied error.
it throws system.unauthorizedexception.
i have given full control on that folder where i was trying to store my attached files. and also after following asp.net forums,
i have added iusr group added and performed all those steps such that, the file is saved in my D:\ drive.
but unfortunately that didnt happen.
also
a) i am trying the code with runwithelevatedprivileges(delegate() ) code
b) shared the drive within the d :drive where i want o save the files.
c) given the full privieleges for the app pool identity- in my case , its
network service.
the other strange thing is that, the same code works perfectly in other machine, where the same sp, vs 2012 etc were installed .
would like to know, any other changes/ steps i need to make it on this server, where i am getting the error.
help is appreciated!

vishnuS1984 wrote:
Hi Friends,
I have gone through scores of examples and i am failing to understand the right thing to be done to copy a file from one directory to another. Here is my class...So let's see... C:\GetMe1 is a directory on your machine, right? And this is what you are doing with that directory:
public static void copyFiles(File src, File dest) throws IOException
// dest is a 'File' object but represents the C:\GetMe1 directory, right?
fout = new FileOutputStream (dest);If it's a directory, where in your code are you appending the source file name to the path, before trying to open an output stream on it? You're not.
BTW, this is awful:
catch (IOException e)
IOException wrapper = new IOException("copyFiles: Unable to copy file: " +
src.getAbsolutePath() + "to" + dest.getAbsolutePath()+".");
wrapper.initCause(e);
wrapper.setStackTrace(e.getStackTrace());
throw wrapper;
}1) You're hiding the original IOException and replacing it with your own? For what good purpose?
2) Even if you had a good reason to do that, this would be simpler and better:
throw new IOException("your custom message goes here", e);
rather than explicitly invokign initCause and setStackTrace. Yuck!

Access denied error while trying to install graphics drivers

Hello,
I have a new toshiba laptop P70-A. I have installed windows 7 and the pc was working excellent up until now. Noticed yesterday that the nvidia automated system failed to install the new update. When I tried to install the new driver manually, even from the
device manager, I got the access denied message.
A day now wasted reading all the possible causes and solutions but with no luck. Read all the forums and all the posts, tried almost everything. Below youll find everything I tried as a solution and failed.
1.Disabled UAC
2.Enabled the administrator account and trying to take control from there
3.Run the subinacl and the reset.cmd
4.Tried manually to take control the folder windows (and access denied while changing the rights)
5. Scanned the system with everything there is available ( Kaspersky, MalwareBytes, RegCurePro, Tuneup Utilities, CCleaner) The system came out clean.
6. Tried restoring the system to an earlier time (got again access denied error code 0x80070005)
7. Checked all the group policies (all seem to be fine)
8. Run a script to take immediate ownership over all of C:
TAKEOWN /A /F C:
then the next one
TAKEOWN /F C:
9. With subinacl I run all the above scripts... (still nothing changed)
@echo off
title Resetting ACLs...
echo.
echo Determine whether we are on an 32 or 64 bit machine
echo.
if "%PROCESSOR_ARCHITECTURE%"=="x86" if "%PROCESSOR_ARCHITEW6432%"=="" goto x86
set ProgramFilesPath=%ProgramFiles(x86)%
goto startResetting
:x86
set ProgramFilesPath=%ProgramFiles%
:startResetting
echo.
cd /d "%ProgramFilesPath%\Windows Resource Kits\Tools"
echo.
echo Resetting ACLs...
echo (this may take several minutes to complete)
echo.
echo IMPORTANT NOTE: For this script to run correctly, you must change
echo the values named Athena to be the Windows user account that
echo you are logged in with.
echo.
echo ==========================================================================
echo.
echo.
subinacl /subkeyreg HKEY_CURRENT_USER /grant=administrators=f /grant=system=f /grant=restricted=r /grant=Athena=f /setowner=administrators > %temp%\subinacl_output.txt
echo.
echo.
subinacl /keyreg HKEY_CURRENT_USER /grant=administrators=f /grant=system=f /grant=restricted=r /grant=Athena=f /setowner=administrators >> %temp%\subinacl_output.txt
echo.
echo.
subinacl /subkeyreg HKEY_LOCAL_MACHINE /grant=administrators=f /grant=system=f /grant=users=r /grant=everyone=r /grant=restricted=r /setowner=administrators >> %temp%\subinacl_output.txt
echo.
echo.
subinacl /keyreg HKEY_LOCAL_MACHINE /grant=administrators=f /grant=system=f /grant=users=r /grant=everyone=r /grant=restricted=r /setowner=administrators >> %temp%\subinacl_output.txt
echo.
echo.
subinacl /subkeyreg HKEY_CLASSES_ROOT /grant=administrators=f /grant=system=f /grant=users=r /setowner=administrators >> %temp%\subinacl_output.txt
echo.
echo.
subinacl /keyreg HKEY_CLASSES_ROOT /grant=administrators=f /grant=system=f /grant=users=r /setowner=administrators >> %temp%\subinacl_output.txt
echo.
echo.
echo System Drive...
subinacl /subdirectories %ProgramFilesPath%\ /grant=administrators=f /grant=system=f /grant=users=e >> %temp%\subinacl_output.txt
echo.
echo.
echo Windows Directory...
subinacl /subdirectories %windir%\ /grant=administrators=f /grant=system=f /grant=users=e >> %temp%\subinacl_output.txt
echo.
echo.
echo ==========================================================================
echo.
echo FINISHED.
echo.
echo Press any key to exit . . .
pause >NUL
Im frustrated really... ANY help at all would be really appreciated.
Thanks in Advance and sorry for the long post
Athena

Hello,
Thanks for the replies, i much appreciate it. I tried all of the above with no luck again. Safe mode allows me though to install drivers but thats reverting the moment im entering windows. Im always running commands and programs as a administrator or in
the Admin enabled account.
It seems the problem is solved today. Via tune up utilities I disabled most of the startup programs and services and it seems that 1 service is causing this issue. Although I havent played much with the disabled services but 3 remain to be checked. One of
the three is causing this.
Thanks again guys and Ill keep you posted about the soft. conflict.
Athena

Access denied when upgrade SharePoint app in on premise deployment while it succeeds in fresh deployment

We deployed a SharePoint hosted app then used it for a while then we needed to upgrade it to be provider hosted app.
we used the same AppID and name with the new package then uploaded the package to the app catalog.
the old app in the site contents now has a note that there is a newer version and prompts to upgrade.
the upgrade fails with access denied even for site collection administrator.
is there really some permission issue or the upgrade can't be done?
We are volunteers, if the reply help you mark it as your answer. thanks!!

Hi,
According to your post, my understanding is that you got access denied error when upgrade the SharePoint hosted app to provider hosted app.
How did you upgrade a SharePoint hosted app to a provider hosted app?
They are two different type apps, why not just create a new provider hosted app?
To create a provider hosted app, we should create a certificate that is used as “security token issuer”.
There are two articles about creating provider hosted high trust app, you can have a look at them.
http://blog.karstein-consulting.com/2013/01/08/create-provider-hosted-high-trust-app-for-sharepoint-2013-short-guide/
http://msdn.microsoft.com/en-us/library/fp179901.aspx
What’s more, there is an topic about the troubleshooting tips for SharePoint high trust app, you can refer to it.
http://blogs.technet.com/b/speschka/archive/2012/11/01/more-troubleshooting-tips-for-high-trust-apps-on-sharepoint-2013.aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Error while crawling LOB contents. ( Access denied by Business Data Connectivity. )

Hi,
When I execute Incremental or Full Crawl I get 17000 error and only 1 success.
The error is:
Error while crawling LOB contents. ( Access denied by Business Data Connectivity. )
I went to Central Admin > Security > Specify Web application Policy > Search for the service account for crawl and it's "svc_SPSearch"
I went to Central Admin > Application Management > Manage Service Application > BDC Service > I select all the affected external sources > then Set Object Permission in ribbon > Added "svc_SPSearch" with execute rights > then
kick incremental crawl...
After this I still get 17000 error, 1 success.. Still an error.
I am not sure how the crawler's trust to FAST infrastructure works.
Your response is appreciated. Thanks!
-Fran

I have the same issue.
I have Configured the BDC Service application using SQL external content. The connection was successful and I am able to see the external content in the List "BDC Demo" . But when I search in the BDC Demo site it gives nothing.
So I checked in the crawl logs and identified that it shows " 1 " under error. to further drill down the issue , I went to click on "1" and see the error message : Error while crawling LOB contents SharePoint 2013 .
I have created an external DB named BCSDemo_DB for which I have granted my search Service account read& write permission.
I have added the same account under administrators for both secure store and BCS service applications.
I have done index reset , done a full crawl but the error still occurs.
Can someone please advise if I am missing something.
Regards

Access Denied Error while accessing "Site Settings Access requests and invitations"

Hi,
I am getting Access Denied Error while accessing "Site Settings > Access requests and invitations" in SharePoint 2013 online. Currently I am the owner of the site and have "FULL CONTROL" access. I am able to access using
site collection account. So, what permission I have to give my regular account to access this page?
Thanks, Pal

Hello,
Have you recently changed the Owners group of the site collection or removed the user from the original owners group?
The reason I am asking is when the Access requests and invitations list are created, the permissions are given only to the default owners group at the time that the Access Request list was created. If this "regular account" is not part of that owners
group, the user will receive access denied. Site Collection Admins always have permissions for the Access Request List.
A workaround for the Access Denied issue is listed in the KB article http://support.microsoft.com/kb/2911390/en-us. By giving the correct group or user the permissions to this list, the users will not receive
the Access Denied issue anymore.
Preferably, in order to grant the user the full permissions ( you will see features like resending invitations may still fail after implementing the above workaround) there is one other workaround that may be required depending on what the original issue
was. Below are additional steps to restore full functionality.
1)Access the /_layouts/15/permsetup.aspx of the site collection, make sure the default Owners Group
is set correctly. (There is a group selected)
2) Add user to that Owners Group. (Issue may be resolved at this step if the site collection Owners
Group was never changed, if not continue to next step.)
3) Implement workaround on http://support.microsoft.com/kb/2911390/en-us, by adding that owners
group as Full control on Access Request list Permissions.
Let me know how this works out for you.
- Shpendi Jashari

"Access Denied" pop up error while opening adobe online form in IE8.

"Access Denied" pop up error while opening adobe online form in IE8. I use crosslink to connect to client network and then open IE with App Tunnel. Tried to re-install Acrobat reader multiple times but issue still persist. Even tried to change the PDF properties (Edit-> Preference- General/Internet/Security Enhanced)

Hello Adobe technical Team,
I am struggling to fix the issue. Tried a lot of combinations to manipulate PDF preference, browser setting but failed to fix the issue. Can someone please look into the details and advise? Thanks in advance for any help.input.

Timerjob Access denied error while opening web object

Hi Team,
I have created a timer job to get list information on the site. Everything is fine in the development(Stand alone server) . Got access denied error while running same timer job in QA server(one app and one WFE).
Note: This timer job is globally deployed.
Code snippet :
SPSite site1 = webApp.Sites[0];
SPWeb web = site1.RootWeb;
SPSecurity.RunWithElevatedPrivileges(delegate()
using (SPSite site = new SPSite(site1.ID))
using (SPWeb currWeb = site.OpenWeb(web.ID)) // Got access denied error here.
Additional information:
Sharepoint timer service account : Domain\SP_Farm
Site app pool account : Domain\SP_App.
Both accounts have site collection administrative access on the site. Do i need to check access permissions on DB level also this error ?
Waiting for urgent reply..

Hi,
1. Please check the link below:
Fixing Access Denied Errors With SharePoint 2010 Timer Jobs
http://www.sharepointsecurity.com/sharepoint/sharepoint-security/fixing-access-denied-errors-with-sharepoint-2010-timer-jobs/
2. Try to set RemoteAdministratorAccessDenied to false using PowerShell
Access denied when deploying a timer Job or activating a feature from SharePoint 2010 content web application
https://support.microsoft.com/kb/2564009?wa=wsignin1.0
3. Check your ULS log for detail error message.
Best Regards
Dennis Guo
TechNet Community Support

Access denied Error while calling Web Service form Infopath Form 2010.

Hi Dear All,
I have been facing an error while calling an GetUserProfileByName() web service method from InfoPath 2010 from.
i have FBA(Forms Base Authentication )configured . After Infopath form published to site collection when i select an user from people picker control i want to get Email Id of Selected user for that i am calling getUserProfileByName() Web Method, but
i am getting Access denied error code 500.
Any Help would be more than welcome.
Thanks.

Hi,
Greetings. Please check
Check the IE settings. Click Internet Options> Security>Custom level. Make sure that the ‘Access data source across domains’ is enabled. Make sure that you have permission to the web service and to the content which the web service tries to modify.
For more information, please refer to this site:
"Access is denied." error in Infopath 2007 form + ASMX: http://us.generation-nt.com/answer/access-denied-error-infopath-2007-form-plus-asmx-help-65808252.html
Please remember to click 'Mark as Answer' on the answer if it helps you

Access denied macintosh hd while in bootcamp-win7

Similar Messages

Maybe you are looking for