Access denied message on the screen???

My son put his ipod on the charger last night and this morning the screens tells us that we do not have access. It says to try again in a year and a half....it acutally says this in minutes. Why would we be getting this? The device is not used for on line use. Absolutely disabled device and will not operate now. It is just under a year old.
Thank you in advance for your advice.

It sounds like the iPod thinks that you have set a psascode to unlock the iPod and that there have been several unsuccessful attempts to enter the correct passcode.  To recover, connect the iPod to your computer   You should be asked for the passcode.  If you know it then enter it on the iPod.  If you do not know the passcode (sometimes the iPod goes haywire and thinks you have set a passcode even if you have not), place the iPod in recovery mode and then restore the iPod.  See the following for recovery mode:
iPhone and iPod touch: Unable to update or restore

Similar Messages

  • Why am I getting an access denied message for the fox news website?

    All of a sudden I am getting an "access denied to this server" message when I try to go to the Fox News website.  What's up with that?

    I can tell you what's up with that. If this is the website you are trying to access, it works fine for me.
    http://www.foxnews.com/
    Check this Settings>Safari>Accept Cookies>From visited. Make sure that it checked.
    If it is and you still can't access the site - clear Safari.
    Go to Settings>Safari>Clear History, Cookies and Cache. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

  • Access Denied message when running WU_TEST_106 form!!!

    Hi all,
    I am trying to use WebUtil components to use Oracle 9.0.3 Form to write from an Oracle Form to a MS Word document. To learn more about WebUtil, I downloaded a sample form named WU_TEST_106.fmb and compiled and have been trying to run it. When this form gets loaded, I click on the 'OLE' tab and then type a message in the 'Enter text to Transfer to Word' box and then pick a file named Sample.doc on my C:\ directory and then click on 'Write to Word' button. This causes the following 'access denied' message and the 'Sample.doc' file never gets updated.
    We are using JInitiator 1.3.1.17, IE 6.0, Java 1.4.2_03 and Oracle 10g database.
    Below is the contenet of the trace file:
    Oracle JInitiator: Version 1.3.1.17
    Using JRE version 1.3.1.17-internal Java HotSpot(TM) Client VM
    User home directory = C:\Documents and Settings\seyedg
    Proxy Configuration: no proxy
    JAR cache enabled
    Location: C:\Documents and Settings\seyedg\Oracle Jar Cache
    Maximum size: 50 MB
    Compression level: 0
    c: clear console window
    f: finalize objects on finalization queue
    g: garbage collect
    h: display this help message
    l: dump classloader list
    m: print memory usage
    q: hide console
    s: dump system properties
    t: dump thread list
    x: clear classloader cache
    0-5: set trace level to <n>
    Loading <SERVER NAME>/forms90/java/f90all_jinit.jar from JAR cache
    Loading <SERVER NAME>/forms90/java/frmwebutil.jar from JAR cache
    Loading <SERVER NAME>/forms90/java/jacob.jar from JAR cache
    proxyHost=null
    proxyPort=0
    connectMode=HTTP, native.
    Forms Applet version is : 9.0.4.0
    Exception occurred during event dispatching:
    java.lang.ExceptionInInitializerError: java.security.AccessControlException: access denied (java.lang.RuntimePermission loadLibrary.jacob)
         at java.security.AccessControlContext.checkPermission(Unknown Source)
         at java.security.AccessController.checkPermission(Unknown Source)
         at java.lang.SecurityManager.checkPermission(Unknown Source)
         at java.lang.SecurityManager.checkLink(Unknown Source)
         at java.lang.Runtime.loadLibrary0(Unknown Source)
         at java.lang.System.loadLibrary(Unknown Source)
         at com.jacob.com.Dispatch.<clinit>(Dispatch.java:537)
         at oracle.forms.webutil.ole.OleFunctions.create_obj(OleFunctions.java:398)
         at oracle.forms.webutil.ole.OleFunctions.getProperty(OleFunctions.java:189)
         at oracle.forms.handler.UICommon.onGet(Unknown Source)
         at oracle.forms.engine.Runform.onGetHandler(Unknown Source)
         at oracle.forms.engine.Runform.processMessage(Unknown Source)
         at oracle.forms.engine.Runform.processSet(Unknown Source)
         at oracle.forms.engine.Runform.onMessageReal(Unknown Source)
         at oracle.forms.engine.Runform.onMessage(Unknown Source)
         at oracle.forms.engine.Runform.processEventEnd(Unknown Source)
         at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
         at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
         at java.awt.Component.dispatchEventImpl(Unknown Source)
         at java.awt.Container.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.EventQueue.dispatchEvent(Unknown Source)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.run(Unknown Source)
    Thanks in advance for your help,
    Seyed

    Hi all,
    Please disregard this posting. I resolved this issue by re-signing both the jacob.jar and frmwebutil.jar. See below:
    Signed the Jacob.jar file once again on 06/02/2008;
    C:\DevSuiteHome\forms90\webutil\webutil>sign_webutil c:\devsuitehome\forms90\jav
    a\jacob.jar
    Generating a self signing certificate for key=webutil2...
    keytool error: java.lang.Exception: Key pair not generated, alias <webutil2> alr
    eady exists
    There were warnings or errors while generating a self signing certificate. Pleas
    e review them.
    Backing up c:\devsuitehome\forms90\java\jacob.jar as c:\devsuitehome\forms90\jav
    a\jacob.jar.old...
    1 file(s) copied.
    Signing c:\devsuitehome\forms90\java\jacob.jar using key=webutil2...
    ...successfully done.
    C:\DevSuiteHome\forms90\webutil\webutil>
    I also re-signed frmwebutil.jar on 06/02/2008 at 9:55 AM:
    C:\DevSuiteHome\forms90\webutil\webutil>sign_webutil c:\devsuitehome\forms90\web
    util\frmwebutil.jar
    The given jar file c:\devsuitehome\forms90\webutil\frmwebutil.jar does not exist
    C:\DevSuiteHome\forms90\webutil\webutil>sign_webutil c:\devsuitehome\forms90\webutil\java\frmwebutil.jar
    Generating a self signing certificate for key=webutil2...
    keytool error: java.lang.Exception: Key pair not generated, alias <webutil2> alr
    eady exists
    There were warnings or errors while generating a self signing certificate. Pleas
    e review them.
    Backing up c:\devsuitehome\forms90\webutil\java\frmwebutil.jar as c:\devsuitehom
    e\forms90\webutil\java\frmwebutil.jar.old...
    1 file(s) copied.
    Signing c:\devsuitehome\forms90\webutil\java\frmwebutil.jar using key=webutil2..
    ...successfully done.
    I can now run the WU_TEST_106.fmb form and successfully write to a MS Word file.
    Thanks for your attention:
    Seyed

  • Hi Trying to download CS5 Design Premium. We have a copy on the Mac and want to put a second copy on the Macbook pro. Can download the file but when it is clicked the file give an error message "User access denied" and dumps the download. So hence I do no

    Hi Trying to download CS5 Design Premium. We have a copy on the Mac and want to put a second copy on the Macbook pro. Can download the file but when it is clicked the file give an error message "User access denied" and dumps the download. So hence I do not get an installation screen or a chance to enter the Licence no.

    Use another browser.
    Mylenium

  • Messages wont scroll? Can't access messages as the screen appears frozen

    I cannot access my text messages as the screen seems to be frozen

    AmishCake is correct, this should help.  Just as a little bit of extension on their answer: The home button is the only physical button on the front of the phone (towards the bottom)
    The sleep/wake button is the power button, located on the top of the phone on the right. 

  • I am not able to open a PDF file that I just created. I get an access denied message instead.

    I am not able to open a PDF file that I just created. I get an access denied message instead.

    Thanks for asking.
    I was combining different types of files into a single PDF. Some of them were excel spreadsheets and I had set the print areas in each file. When I cleared the print area the problem stopped. So I am assuming that had something to do with it. Though I am not sure.
    The strange thing was that I was able to open the excel source documents after creating the faulty PDF but some of the MS word source documents also had "access denied" status. I still cannot figure that part out.

  • Purchased a Digital Download of CS5, get Access Denied message

    I've just purchased a digital download of Adobe Photoshop CS5 for a Mac, and the online company has given me the links and key for the download. However, following the company's directions after downloading the Adobe Download Assistant, clicking on the link sent by the company gives me an Access Denied message:
    Access Denied
    You don't have permission to access "http://trials2.adobe.com/AdobeProducts/PHSP/12/win32/Photoshop_12_LS1.exe" on this server.
    Reference #18.4046cd8.1355007792.1108aab1
    Any thoughts on why my link to download CS5 doesn't work?

    Well, not to state the obvious: You have been had. A company selling digital downloads of CS5 now that CS6 is out and then pointing to the trial versions? Do you need any more evidence that this is a scam? The download issues can be resolved following proper procedures as described here:
    Direct Download Links for Adobe Software
    Still, probably a moot point since your serial numbers will be most likely useless...
    Mylenium

  • Access Denied message in Flash CS5 help

    Hi,
      I had the problem with an Access Denied message when running community help and followed the technote instructions to re-install, but still had errors.
      Browsing the config files in my newly created folder for the chc app:
      %appData%\chc.4875E02D9FB21EE389F73B8D1702B320485DF8CE.1\Local Store\HelpCfg\en_US
      I find that the "baseURL" setting in Flash_11.0.helpcfg was set to: baseUrl="http://help.stage.adobe.com/"
      Which also shows the Access Denied error in the browser.
      Changing this to baseUrl="http://help.adobe.com/" seems to start it working and I get packages downloading etc.
      Not sure if the URL is right, but that helped me.

    I am having the same issue, Mac OSX.
    Can't find ANY of the files you have referred to, and I'm incredibly frustrated that once again Adobe has screwed up my day's work.
    Why can't we just have the reference documentation instead of all this 'community' help.
    There's a time an a place for that - and it's online. Why can't I just get the reference info I want for the app I am using by clicking on HELP?
    And why does my CD-based install require access to your website to get help files?
    Now I have to waste time finding and fixing another of your bugs because you're trying to make something overly complicated.
    I understand why you do not give printed documentation with boxed product - but WHY can't we just have a PDF file?

  • HTTP errors and/or access denied messages preventing me from downloading CS5.5

    How can I download my copy of CS5.5 Design Standard? I keep getting HTTP errors and/or access denied messages.

    Alex5555 where are you downloading the installation files from?  Have you tried utilizing a different web browser?  Is your web browser configured to accept cookies?

  • Access denied message in FR

    Hi All,
    We are getting <BR> Access denied message many times, when we are working on FR ? Can you pls. let me know what will be the reason for this ? Users also getting te same issue.
    Thanks,
    PVR

    There can be mutiple reasons for that..
    IF its intermittent errors on Web then you might need to adjust the java settings for FR .Also If this is the issue is on the Reports client then you want to make sure that path for css.dll is being added to system path

  • When trying to download an on-line document, how do I correct an access denied message?

    When trying to download an on-line document, how do I correct and "access denied" message?

    If you are trying to access a document from someone else's site and you are getting an access denied message, it is probably because you are not supposed to be able to acquire the file without getting more access permissions than you have at the moment.

  • Removing ''Access Denied'' message

    down votefavorite
    I am creating a site where I want 3 different document folders. Each one available to approximatley 1/3 of the users.
    This is what a user will usually see: 
    And i want to remove the ''Access denied message''.
    I know how to work with different groups access so this is not the problem btw

    Hi,
    Do you want to change the message on your access denied page? If yes, you can create a custom application page with a custom message and set it as Access Denied page for a web application.
    Check this
    link, which shows how to set custom access denied page for SP2010, which should work the same way for SP2013.
    But, due to product bug in SP2013, custom mapped pages are not working, and is fixed in the May CU. So, if you are considering this option, you have install the May CU.
    Hope this helps.
    Ram Prasad Meenavalli | MCITP | MCTS SharePoint | MCPD SharePoint | http://www.spdeveloper.co.in

  • I have pluged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?

    I have plugged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?
    if the device I connected have caused this, shouldn't the macbook itself have some type of protection that should prevent this from happening.
    because when I took it to an apple certified maintenance shop, the guy said that now it could only run while connected to the power. it won't run on batteries. and that I have to change the motherboard.
    can I just replace the damaged part only, would apple consider this as a design issue and they could pay for it, or should I just buy a new motherboard for 800$.
    Help.

    BB1B2,
    The problem is in finding a tech shop that will/can do board level repairs on Macs. They are few. And I certainly wouldn't spend $800 on a new logic board - I would replace the computer if I had to pay that much!
    You could call around to a few repair shops and see if they feel competent to isolate the problem and do a board level repair - but I'm afraid, in the end, that your search will be futile.
    Sorry,
    Clinton

  • How to give error message for the screen element text field when wrong i/p

    How to give error message for the screen element text field when wrong i/p
    when wrong input given
    eg. 
    I have a text box with SBOOK-CARRID
    so when user give wrong entry in text box i.e LG
    then I should give some error stating that the the input is invalid or not available ,
    now it showing the error of standard messages,
    i want manual message to be displayed when error comes.
    Thank you,
    Regards,
    Jagrut Bharatkumar Shukla

    Hi all,
    Thank you for your valuable reply,
    but the thing is that its a screen field,
    i.e text box not a selection screen
    i created in screen layout
    with name sbook-carrid
    now i want to get error message display if wrong i/p is given
    thank you.
    Regards,
    Jagrut bharatkumar Shukla,

  • Display error message as as status message on the screen

    Hi all,
    How to display error message as as status message on the screen
    The requirement is if I call the screen, it should get with the error message in the status bar. If I write with error message 'E' error mesage information displays and when I click on exit, it leave the current transaction.
    if i display success message and use display like 'E' it display the error message but if i save it save the transaction.
    i cannot use leave to screen also because of subscreen. if i use leave to screen system display set screen not allowed in subscreen.
    so i want to stop the processing or do not allow the transaction to complete on the message.

    Hi
    displaying error message like status message will help u?
    try the below code
    MESSAGE 'Error' TYPE 'E' DISPLAY LIKE 'S'.
    cheers
    shibu

Maybe you are looking for