Access Denied When Compiling

I have no problems using the javac command to compile files normally but when I try to compile using the following command -
javac - sourcepath <c:\test> *.javaI am getting the following message -
Access is denied.Does anyone know what might be causing this problem, I have full priviledges on this machine so I have no idea what could be causing the problem.
Thanks.

javac - sourcepath <c:\test> *.javaWhy not writejavac c:\test\*.java

Similar Messages

Photoshop cs4 access denied when trying to install from disc in Windows 7 64bit.

Photoshop cs4 access denied when trying to install from disc in Windows 7 64bit. I tried it in
safe mode and it starts to install but get an error there as well.
What do I do?

So when you put the disk in it won't run correctly? When the disk is inserted you should have a window pop up with 2 options. 1 to install and the other to see what is on the disk. Choose to explore or open the disk. Go to the CS4 folder where the photoshop .exe file is (that will run the setup), right click on the .exe file and choose run as Admin and it should start. See if it will install. If not then read below.
I am not sure how far you got in the install before so chances are you will have to run the CS4 cleanup utility. 2 levels to run at but don't use 1 or 2 just type in the number 3.
http://www.adobe.com/support/contact/cs4clean.html
You may need to run the windows installer cleanup utility too
http://support.microsoft.com/kb/290301
Before you try to reinstall the software ensure that adobe reader is not installed. If it is remove it. It has caused issues in the past with vista and CS4 installs.
Also turn off windows Defender and any anti-virus software. You can keep UAC on in Windows 7.
During the CS4 install at 90 percent it will almost stop and may take 5 to 10 mins to finish. This is normal. What a pain huh......
After install is finished, reboot
After reboot, go to the CS4 64 bit or 32 bit icon (depends on 32 or 64 bit Windows 7) in start area, right click on CS4 64 bit (if you have windows 7 64 bit) and choose properties, compatibility tab and then check run as Admin at the bottom area. Hit apply, ok to close out.
Now start CS4 and run the updater.

Get "Access Denied" when click open a PDF file

Hi Friends,
Get "Access Denied" when click open a PDF file linked from SharePoint 2013 page.
What are the route causes any one is remove the permissions are stopped the inheritance permissions of the library.
Can anyone face the same issue please help me.
Thanks,
Tiru
tirupal

Hi,
If you are able to open the same document earlier,then anonymous access enabled on your doc library then.
If you are facing this problem in first time,then you do not have required permission (may be custom permission level has been set ) on it.
Murugesa Pandian.,MCTS|App.Development|Configure

Access Denied when Student Uploads Course in Drop Box

All of a sudden we are getting access denied when a student tries to upload a course. We have not changed anything on our end. The tabs on the course page are set to drop box for student. The credentials sent over are:
StudentBody@urn:mace:itunesu.com:sites:school.edu;Student@urn:mace:itunesu.com:s ites:school.edu:SPC16001002134
The SPC16001002134 is the course identifier.
Access to the course for student is set to download:
Access Level: Download
Credential Definition: Student@urn:mace:itunesu.com:sites:school.edu:${IDENTIFIER}
Group Access Label: Student

Hi,
I need a bit more information. Can you please post your site's domain so that I can inspect it? It appears you have replaced this with school.edu.
Thanks.

ORA-31050: Access denied when try to register XMLSchema

Dear All
I got ORA-31050: Access denied
when tried to run to load XML schema with DBMS_XMLSCHEMA.registerSchema
Can you advise me what privilege should I grant to the user?
I tried grant XDBADMIN role but it does nto help
Thank you in advance
Artem Rodin

Dear Mark!
I realy need you help!
I can successfully register schema which has complexType declaration as root element, like
<schema targetNamespace="http://www.oracle.com/PO.xsd"
     xmlns:po="http://www.oracle.com/PO.xsd"
     xmlns="http://www.w3.org/2001/XMLSchema">
<complexType name="PurchaseOrderType">
     <sequence>
          <element name="PONum" type="decimal"/>
          <element name="Company">
               <simpleType>
                    <restriction base="string">
                         <maxLength value="100"/>
                    </restriction>
               </simpleType>
          </element>
          <element name="Item" maxOccurs="1000">
               <complexType>
                    <sequence>
                         <element name="Part">
                              <simpleType>
                                   <restriction base="string">
                                        <maxLength value="1000"/>
                                   </restriction>
                              </simpleType>
                         </element>
                         <element name="Price" type="float"/>
                    </sequence>
               </complexType>
          </element>
     </sequence>
</complexType>

</schema>
But I failed if in the root there is element like
<schema targetNamespace="http://www.oracle.com/PO.xsd"
     xmlns:po="http://www.oracle.com/PO.xsd"
     xmlns="http://www.w3.org/2001/XMLSchema">
<complexType name="PurchaseOrderType">
     <sequence>
          <element name="PONum" type="decimal"/>
          <element name="Company">
               <simpleType>
                    <restriction base="string">
                         <maxLength value="100"/>
                    </restriction>
               </simpleType>
          </element>
          <element name="Item" maxOccurs="1000">
               <complexType>
                    <sequence>
                         <element name="Part">
                              <simpleType>
                                   <restriction base="string">
                                        <maxLength value="1000"/>
                                   </restriction>
                              </simpleType>
                         </element>
                         <element name="Price" type="float"/>
                    </sequence>
               </complexType>
          </element>
     </sequence>
</complexType>
<element name="PurchaseOrder" type="po:PurchaseOrderType"/>
</schema>
I got the following error stack
ORA-01031: insufficient privileges
ORA-06512: at “XDB.DBMS_XDBZ0”, line 218
ORA-06512: at “XDB.DBMS_XDBZ”, line 6
ORA-06512: at line 1
ORA-06512: at “XDB.DBMS_XMLSCHEMA_INT”, line 0
ORA-06512: at “XDB.DBMS_XMLSCHEMA”, line 26
ORA-06512: at “XDB.DBMS_XMLSCHEMA”, line 131
ORA-06512: at “DVLP.PRIME_BRIDGE”, line 73
ORA-06512: at line 7
I guess you can reproduce this in-house,
It's not my schema it is taken from
XML Database Developer’s Guide - Oracle XML DB
Structured Mapping of XMLType 5-3
Example 5–1 XML Schema Definition, po.xsd
As far as I understand in the second case Oracle tries to create a table to store XML content and fails to do it.
User that I used has DBA role. What other privileges should I grant to the user? And/or I should grant some additional privileges to "XDB" user?
This issue has become critical for me, so I am highly appreciate any assistance
Many thanks in advance
Best regards
Artem Rodin

I receive "Database access denied" when trying to add component 4543BD

I receive "Database access denied" when trying to add component 4543BD to my schematic. This component was added from a previous version. I'm using Multisim version 12.0.0 Student edition.
Solved!
Go to Solution.

Hi Diarra,
I checked my database and the 4543 is not in the Student Edition. If you opened a schematic that was created in a higher version such as the Educaiton Edition and copied the part to your database, when you place this part you will get the access denied message.
Attached is a schematic with the part, you can open it and build you circuit around it.
Tien P.
National Instruments
Attachments:
4543.ms12 ‏62 KB

I get access denied when I try to search on your site.

Please help me. I get access denied when I try to search on your site. I have emptied cache. I tried Safe Mode the way you suggested. Still access denied (though my printer then would not respond to me and I spent $85 to have my It consultant fix that problem.

Hi,
You've opened 3 different threads for the same issue. Please only open '''ONE''' thread per support request.
Continue here [https://support.mozilla.org/en-US/questions/995124?esab=a&s=&r=3&as=s /questions/995124]
Closing thread

I get access denied when I add a page to a workset in EP 7

I get access denied when I add a page to a workset in EP 7.
Please advice.

Hello,
This seems to be a permission issue. Assign the user id proper permission, say system_admin_role and then try.
Regards
Deb

Access denied when adding people to SharePoint group

Hi all,
I've been having problems with my SharePoint 2010 deployment that wasn't deployed by me. Sound familiar? Anyways, here is my problem: I try to add people to a SharePoint group and I'm getting:
Access Denied.
You do not have permission to perform this action or access this resource.
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: 930333d7-64dc-4135-8f51-686303a9847c
Date and Time: 7/29/2014 2:21:11 PM
I've been having problems with pulling AD members in one of my site collections for awhile now. Been troubleshooting with what information I can find online. One step I took was to blank out the LDAP search string for each site collection so that it's not
limited to certain OUs.
Also I am getting security log entries that my farm account is trying to authenticate as a privileged [administrative permissioned] account for an employee that is no longer with us. Coincidentally enough he's the one that deployed this SharePoint solution
originally.
I need help in tracking down why I cannot add users to groups in this one site collection; but my root site collection I can add people no problem.
Environment:
Server1: SQL 2008 R2 on Windows Server 2008 R2
Server2: SharePoint 2010 with Enterprise CALs on Server 2008 R2
Current event viewer entries of note:
Load control template file /_controltemplates/TaxonomyPicker.ascx failed: Could not load the assembly ';Microsoft.SharePoint.Portal, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c'. Make sure that it is compiled before accessing the page.
Object Cache: The super user account utilized by the cache is not configured. This can increase the number of cache misses, which causes the page requests to consume unneccesary system resources.
To configure the account use the following command 'stsadm -o setproperty -propertyname portalsuperuseraccount -propertyvalue account -url webappurl'. The account should be any account that has Full Control access to the SharePoint databases but is not an application pool account.
Additional Data:
Current default super user account: SHAREPOINT\system
A logon was attempted using explicit credentials.
Subject:
Security ID: domain\farm_account
Account Name: farm_account
Account Domain: domain
Logon ID: 0x79c13
Logon GUID: {e25efc28-8db1-ea76-9a8e-6d0143a681d9}
Account Whose Credentials Were Used:
Account Name: former_admin_employee
Account Domain: domain
Logon GUID: {00000000-0000-0000-0000-000000000000}
Target Server:
Target Server Name: domain_controller.domain.net
Additional Information: domain_controller.domain.net
Process Information:
Process ID: 0x13b0
Process Name: C:\Windows\System32\inetsrv\w3wp.exe
Network Information:
Network Address: -
Port: -
This event is generated when a process attempts to log on an account by explicitly specifying that account’s credentials. This most commonly occurs in batch-type configurations such as scheduled tasks, or when using the RUNAS command.

Hello,
> he's the one that deployed this SharePoint solution originally.
Are you trying to add user by custom solution? If so then it seems your code is using the impersonate method to run code with admin privileged (i.e. RunWithElevatedPrivileges or User token).
If this is the case then you have to first add new account as site collection in site then change that web application pool identity on IIS. Go to IIS-->select your web app pool-->then go to properties and verify which account is been used
there. If it is old then replace with your account.
Let us know your result
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

Access Denied when trying to open a file that is encrypted on network share with EFS

I just recently enabled EFS on the default domain policy and created a new network share, encrypted a file and added myself to that file and tried to open the file from my workstation. I then receive an error "Access denied", I also tried
to create a file and encrypt it on that same share and get an error "The requested operation cannot be completed. The computer must be trusted for delegation and the current user account must be configured to allow delegation."
My steps.
1. Enable group policy for EFS, removed the expired certificate that was already there and Created a new Data recovery agent.
2. Created a network share, created a test file, enabled encryption on the file
3. certmgr.msc, personal and requested a new certificate, Basic EFS
4. On the network share and properties of file, advanced, details and added the user
5. from the workstation tried to access the file, Access Denied. I can create any file I won't just can't add attributes to encrypt the file or open an encrypted file
Now if I go to the server where the CA is located which is also the AD server and create share and run the same process it works as expected. I'm guessing I have to export the cert from the CA server as a pfx and import that to both the server that
has the network share and the workstation but that still doesn't seem to work. Maybe I don't understand how EFS works and this is not possible? Any suggestions would be appreciated.

You are correct in not understanding how EFS works.
When you connect to an encrypted file via a network share, the encryption/decryption takes place *on* the server. To enable over the network access, the server's computer account must be trusted for delegation.
The server actually impersonates the user and creates a user profile on the server (containing the defined EFS certificate and private key). The important thing to remember is that the files is transmitted in clear text from the server to the client.
See http://blogs.technet.com/b/instan/archive/2010/08/11/remote-efs-decryption-and-trusted-for-delegation-requirements.aspx
Brian

Windows 7 Open and Save As dialog box gives an "Access Denied" when using common Windows Explorer features.

On many computers in our environment we have issues in Windows 7 when using the Common Dialog Box. Within the dialog box we get the error Access Denied whenever we try to create a folder. If we try to rename a file it doesn't give an error but
it doesn't work either. We cannot delete a file, still no error, but we can create shortcut.
Within Windows Explorer of the same user it has no issues.
Even if we run an application as administrator it has the same results.
Example: Open Paint (right click "Run As Administrator"); then File, "Save As", right-click in empty space; then New, Folder. This caused the error to popup "Unable to create the folder 'New folder' Access is denied."
Thanks for your help,
Daniel

Hi Daniel,
How are things going? As the article provided above said, for such kind of issues generally it is caused by permission settings.
The article provided several possible solution and please let us know if there is anything unclear about the steps.
If you have any feedback on our support, please send to [email protected]

Access denied when upgrade SharePoint app in on premise deployment while it succeeds in fresh deployment

We deployed a SharePoint hosted app then used it for a while then we needed to upgrade it to be provider hosted app.
we used the same AppID and name with the new package then uploaded the package to the app catalog.
the old app in the site contents now has a note that there is a newer version and prompts to upgrade.
the upgrade fails with access denied even for site collection administrator.
is there really some permission issue or the upgrade can't be done?
We are volunteers, if the reply help you mark it as your answer. thanks!!

Hi,
According to your post, my understanding is that you got access denied error when upgrade the SharePoint hosted app to provider hosted app.
How did you upgrade a SharePoint hosted app to a provider hosted app?
They are two different type apps, why not just create a new provider hosted app?
To create a provider hosted app, we should create a certificate that is used as “security token issuer”.
There are two articles about creating provider hosted high trust app, you can have a look at them.
http://blog.karstein-consulting.com/2013/01/08/create-provider-hosted-high-trust-app-for-sharepoint-2013-short-guide/
http://msdn.microsoft.com/en-us/library/fp179901.aspx
What’s more, there is an topic about the troubleshooting tips for SharePoint high trust app, you can refer to it.
http://blogs.technet.com/b/speschka/archive/2012/11/01/more-troubleshooting-tips-for-high-trust-apps-on-sharepoint-2013.aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Access Denied when trying to access shared folders on the server with administrative privileges

I have problem accessing shared folder on the server machine from Windows 7 machine even if I try to access it with administrative privileges (server Administrator account). I will try now to explain better my situation.
In my company, we have small network infrastructure with one main server machine (HP ProLiant server) with Windows Server 2012 R2 installed and couple of desktop machines. The network is administrated by me.
On Windows Server we have installed and setup DHCP, DNS, Remote Access and Routing, File and Storage and Active Directory services. Desktop machines are having Windows 8.1 Pro, Windows 8.1 or Windows 7 Home Premium installed on them. In Active
Directory I have created domain, User groups and Users for employees in my company and so far, I didn't added desktop machines to the domain.
Also, I've created one folder on the server which should contain different projects data for network users and I have set access permissions and security for this folder and shared it on the network (I've added couple of users to one user group and I
gave Full control to this group over this folder). When I try to access this folder from network, I've been asked for login credentials (normally), where I just type in one of users username and password who has been given access permissions to (who is member
of group with full control over the folder). From Windows 8.1 Pro and Windows 8.1 machines I can access and work on this folder without any problems.
The problem comes with Windows 7 machines. On Windows 7 machines (I have also tried this with Windows 7 Ultimate in VMWare) I can access server, I can see its shares, but as soon I try to access folder I've created for projects, I get Access Denied message
with request for User login credentials. Whichever user account I use (even servers main Administrator account) I keep getting this message over and over and I'm unable to access it at all.
I have also tried to access the server through VPN (from local or outside) but I'm getting the same error again. Also I've tried to add these Windows 7 machines to the domain and login with domain user but the result is the same. Turned off both firewalls
(on server and desktop machines, which I know is unnecessary, but lets try it), still same case. I've tried couple more things with registry editor on desktop machines which I found on different forums and websites but still no luck. And now I don't know
what else I can do.
Does anyone knows what's the problem here, have I set something wrong, have not set something I should?

Hi MeipoXu,
thanks for your response. I will first answer on your question.
Yes, the main issue is that we can see the folder when we access the server but we cannot access its contents from Windows 7 machines. I have tried on two machines, one with Windows 7 Home Premium version and the other one with Windows 7 Ultimate version
and the situation is the same.
As you recommended, I've checked Network Discovery and File and Printer Sharing and the situation is next: File and Printer Sharing is turned on all layers (Private, Public and Domain) while Network Discovery is off for all layers too. I don't know if this
is normal thing but Network Discovery cannot be turned on in Windows Server (I'm able to select Turn on Network Discovery and apply the changes, but when I get back to this settings page, I again see that it's turned off, so I assume this can't be changed
at all).
I also tried with icacls in command prompt and everything seems to be ok there regarding permissions. Share permissions are set to Full control to Everyone and Security permissions are set to Full control only for Administrators and the user group I've created
for employees in my company. The confirmation for this is that on Windows 8 machines you can access this folder without any problem and without getting any message connected with access permissions with any user account within this user group. This share is
created through File and Storage Services service in Server Manager panel.
And then something came up on my mind. I went in Server Manager to check shared folder settings in File and Storage Services and under Settings page I saw that "Encrypt data access" has been enabled (I enabled this option because I thought
I will get more security with this option). I asked my self what would happen if I disable it, tried it and now everything works ok on Windows 7 machines too. Now I assume that Windows 7 doesn't have this feature implemented or there are some
settings which needs to be set on Windows 7 machines to make this encryption thing work with Windows Server. So basically, I will let this feature off for now until I find out more about it and how to implement it to work with all operating systems.
I want to thank you once more for your kind help!

Access Denied when access to File System Repository

Hi,
Our SAP Portal install in Windows 2003, and access to a unix's file system that created from File System Repository of Portal. When I access it in KM content, SAP Portal return the following message:
System Error
An exception occurred during the program execution. Below you will find technical information pertaining to this exception that you might want to forward to your system administrator.
Exception Class: class com.sapportals.wcm.repository...
Exception Message: Access denied
If I double-click any file,
IE return 403: The requested operation is forbidden for this resource.
Please help me to fix this problem?
PS: The unix's file system mode is 777.
The permission of folder in Portal File System Repository is everyone full control.
Message was edited by: Jeff Lien
Message was edited by: Jeff Lien

Hi,
to my knowledege, this combination is not supported. You can integrated Windows-File-Shares in a Unix-Portal: http://help.sap.com/saphelp_nw04/helpdata/en/ed/b334ea02a2704388d1d2fc3e4298ad/frameset.htm but not the other way round
Kind reagrds
karin

Access denied when jsp writes to a`network file system

Hi
Can anyone help. Im having big problems with my web application which was working fine when it was hosted on a tomcat windows NT machine. The application was recently upgraded to a Windows 2000 machine. My jsp page which has to write to a network drive can no longer do so. I keep getting ACCESS DENIED.
My jsp page is as follows:
<html>
<head><title>test</title></head>
<body>This is a test page
<jsp:useBean
id="sendSMS"
scope="page"
class="podsystembeans.phonetrackbeans.FileWrite"
/>
<%
String sms = sendSMS.testIO();
out.println(sms);
%>
</body></html>My javabean is as follows:
package podsystembeans.phonetrackbeans;
import java.io.*;
public class FileWrite
     public String testIO(){
          try{
                   // Create file
              FileWriter fstream = new FileWriter("R:/outt.txt");
             BufferedWriter out = new BufferedWriter(fstream);
              out.write("Hello Java");
              //Close the output stream
              out.close();
          }catch (Exception e){//Catch exception if any
            System.out.println("Error testing : " + e.getMessage());
     return "success";
}OBSERVATION
If i try and write the file to the local machine for example C and D drives then it works. If i try and write the file to R drive which is another windows 2000 machine then i get access denied. Also if i try and write to a L drive which is a windows NT machine then i get the same message too.
If i run the above bean as a stand alone application with
public static void main
and I run it then it will work and write to any drive on the network.
Everytime my application fails to write to the network drive my windows machine shows the mapped drives with a red cross on it. I have applied the latest service packs and i have followed microsofts suggestions editing the registry autodisconnect keys. But i am still having problems and it is my java app which is causing it.
SETTINGS
Windows 2000 service pack 4
Tomcat 5 installed on d drive
java 5 installed on c drive
mapped network drives to other machines , the network is a 192.168.1.x network
regards
antek

Hi
Thanks for the pointer, I am trying to follow the suggestion and I want to know is the server.policy same as catalina.policy in tomcat under the conf folder. Also in this policy do i write the ip addresses of the machines i want to access?
Thanks
Antek

Access Denied When Compiling

Similar Messages

Maybe you are looking for