"Access denied" when external WD HDD moved to Win8 machine

Hi all. My new Win8 machine does not let me access my backup external WD HDD. It's assigned a letter k:, but I only get "Access is denied".
Old box died (Pavillion running Vista). I bought a new Pavillion running Win8.
Updating the driver tells me I already have the latest driver. I ran cmd prompt "secedit...", as suggested in other articles, but no success. I tried changing Admin rights, but it "failed to enumerate objects in the container."
I didn't have password protection on the external HDD.
Any suggestions?

Hi,
What is the result in disk management?
Refer to this article:
Permission error - Failed to enumerate objects in the container. Access is denied.
http://answers.microsoft.com/en-us/windows/forum/windows_8-security/permission-error-failed-to-enumerate-objects-in/93ea883f-853f-4981-a697-928bfbc71642?page=1
Alex Zhao
TechNet Community Support

Similar Messages

Photoshop cs4 access denied when trying to install from disc in Windows 7 64bit.

Photoshop cs4 access denied when trying to install from disc in Windows 7 64bit. I tried it in
safe mode and it starts to install but get an error there as well.
What do I do?

So when you put the disk in it won't run correctly? When the disk is inserted you should have a window pop up with 2 options. 1 to install and the other to see what is on the disk. Choose to explore or open the disk. Go to the CS4 folder where the photoshop .exe file is (that will run the setup), right click on the .exe file and choose run as Admin and it should start. See if it will install. If not then read below.
I am not sure how far you got in the install before so chances are you will have to run the CS4 cleanup utility. 2 levels to run at but don't use 1 or 2 just type in the number 3.
http://www.adobe.com/support/contact/cs4clean.html
You may need to run the windows installer cleanup utility too
http://support.microsoft.com/kb/290301
Before you try to reinstall the software ensure that adobe reader is not installed. If it is remove it. It has caused issues in the past with vista and CS4 installs.
Also turn off windows Defender and any anti-virus software. You can keep UAC on in Windows 7.
During the CS4 install at 90 percent it will almost stop and may take 5 to 10 mins to finish. This is normal. What a pain huh......
After install is finished, reboot
After reboot, go to the CS4 64 bit or 32 bit icon (depends on 32 or 64 bit Windows 7) in start area, right click on CS4 64 bit (if you have windows 7 64 bit) and choose properties, compatibility tab and then check run as Admin at the bottom area. Hit apply, ok to close out.
Now start CS4 and run the updater.

Get "Access Denied" when click open a PDF file

Hi Friends,
Get "Access Denied" when click open a PDF file linked from SharePoint 2013 page.
What are the route causes any one is remove the permissions are stopped the inheritance permissions of the library.
Can anyone face the same issue please help me.
Thanks,
Tiru
tirupal

Hi,
If you are able to open the same document earlier,then anonymous access enabled on your doc library then.
If you are facing this problem in first time,then you do not have required permission (may be custom permission level has been set ) on it.
Murugesa Pandian.,MCTS|App.Development|Configure

Access Denied when Student Uploads Course in Drop Box

All of a sudden we are getting access denied when a student tries to upload a course. We have not changed anything on our end. The tabs on the course page are set to drop box for student. The credentials sent over are:
StudentBody@urn:mace:itunesu.com:sites:school.edu;Student@urn:mace:itunesu.com:s ites:school.edu:SPC16001002134
The SPC16001002134 is the course identifier.
Access to the course for student is set to download:
Access Level: Download
Credential Definition: Student@urn:mace:itunesu.com:sites:school.edu:${IDENTIFIER}
Group Access Label: Student

Hi,
I need a bit more information. Can you please post your site's domain so that I can inspect it? It appears you have replaced this with school.edu.
Thanks.

ORA-31050: Access denied when try to register XMLSchema

Dear All
I got ORA-31050: Access denied
when tried to run to load XML schema with DBMS_XMLSCHEMA.registerSchema
Can you advise me what privilege should I grant to the user?
I tried grant XDBADMIN role but it does nto help
Thank you in advance
Artem Rodin

Dear Mark!
I realy need you help!
I can successfully register schema which has complexType declaration as root element, like
<schema targetNamespace="http://www.oracle.com/PO.xsd"
     xmlns:po="http://www.oracle.com/PO.xsd"
     xmlns="http://www.w3.org/2001/XMLSchema">
<complexType name="PurchaseOrderType">
     <sequence>
          <element name="PONum" type="decimal"/>
          <element name="Company">
               <simpleType>
                    <restriction base="string">
                         <maxLength value="100"/>
                    </restriction>
               </simpleType>
          </element>
          <element name="Item" maxOccurs="1000">
               <complexType>
                    <sequence>
                         <element name="Part">
                              <simpleType>
                                   <restriction base="string">
                                        <maxLength value="1000"/>
                                   </restriction>
                              </simpleType>
                         </element>
                         <element name="Price" type="float"/>
                    </sequence>
               </complexType>
          </element>
     </sequence>
</complexType>

</schema>
But I failed if in the root there is element like
<schema targetNamespace="http://www.oracle.com/PO.xsd"
     xmlns:po="http://www.oracle.com/PO.xsd"
     xmlns="http://www.w3.org/2001/XMLSchema">
<complexType name="PurchaseOrderType">
     <sequence>
          <element name="PONum" type="decimal"/>
          <element name="Company">
               <simpleType>
                    <restriction base="string">
                         <maxLength value="100"/>
                    </restriction>
               </simpleType>
          </element>
          <element name="Item" maxOccurs="1000">
               <complexType>
                    <sequence>
                         <element name="Part">
                              <simpleType>
                                   <restriction base="string">
                                        <maxLength value="1000"/>
                                   </restriction>
                              </simpleType>
                         </element>
                         <element name="Price" type="float"/>
                    </sequence>
               </complexType>
          </element>
     </sequence>
</complexType>
<element name="PurchaseOrder" type="po:PurchaseOrderType"/>
</schema>
I got the following error stack
ORA-01031: insufficient privileges
ORA-06512: at “XDB.DBMS_XDBZ0”, line 218
ORA-06512: at “XDB.DBMS_XDBZ”, line 6
ORA-06512: at line 1
ORA-06512: at “XDB.DBMS_XMLSCHEMA_INT”, line 0
ORA-06512: at “XDB.DBMS_XMLSCHEMA”, line 26
ORA-06512: at “XDB.DBMS_XMLSCHEMA”, line 131
ORA-06512: at “DVLP.PRIME_BRIDGE”, line 73
ORA-06512: at line 7
I guess you can reproduce this in-house,
It's not my schema it is taken from
XML Database Developer’s Guide - Oracle XML DB
Structured Mapping of XMLType 5-3
Example 5–1 XML Schema Definition, po.xsd
As far as I understand in the second case Oracle tries to create a table to store XML content and fails to do it.
User that I used has DBA role. What other privileges should I grant to the user? And/or I should grant some additional privileges to "XDB" user?
This issue has become critical for me, so I am highly appreciate any assistance
Many thanks in advance
Best regards
Artem Rodin

I receive "Database access denied" when trying to add component 4543BD

I receive "Database access denied" when trying to add component 4543BD to my schematic. This component was added from a previous version. I'm using Multisim version 12.0.0 Student edition.
Solved!
Go to Solution.

Hi Diarra,
I checked my database and the 4543 is not in the Student Edition. If you opened a schematic that was created in a higher version such as the Educaiton Edition and copied the part to your database, when you place this part you will get the access denied message.
Attached is a schematic with the part, you can open it and build you circuit around it.
Tien P.
National Instruments
Attachments:
4543.ms12 ‏62 KB

I get access denied when I try to search on your site.

Please help me. I get access denied when I try to search on your site. I have emptied cache. I tried Safe Mode the way you suggested. Still access denied (though my printer then would not respond to me and I spent $85 to have my It consultant fix that problem.

Hi,
You've opened 3 different threads for the same issue. Please only open '''ONE''' thread per support request.
Continue here [https://support.mozilla.org/en-US/questions/995124?esab=a&s=&r=3&as=s /questions/995124]
Closing thread

I get access denied when I add a page to a workset in EP 7

I get access denied when I add a page to a workset in EP 7.
Please advice.

Hello,
This seems to be a permission issue. Assign the user id proper permission, say system_admin_role and then try.
Regards
Deb

Access denied to external Hard Drive on Windows 7?

Hey,
Thanks in Advance for your help. Yesterday I downloaded and installed Windows 7 (which looks like its going to be a massive improvement on Vista!!). Though I had a problem when I tried to open my external Hard drive (which is an Internal hard drive in an enclosure ":H"). An error message pops up every time I double click it saying that access to this drive is denied.
This used to happen when I would change from PC to PC but was able to fix it using instructions from this Link http://www.le.ac.uk/cc/dsss/docs/acls2.shtml
Any help would be much appreciated.
Regards
Jordan

Folks,
I faced a similar problem when trying to move a NTFS formatted disk from XP to windows 7. I tried suggestions on various forums but nothing worked. Finally though, i was able to identify the root cause empirically and fix it.
1. In my understanding, Windows 7 interprets the permissions on a NTFS drive very strictly. Hence while a NTFS HDD with tweaked security settings - say with only administrator access/ownership under security tab may work perfectly in XP, OS X, Ubuntu etc
, Win 7 will show you access denied unless permissions for ALL of the following: AuthenticatedUsers, SYSTEM, Administrator & Users is set correctly (which is default for a newly formatted drive in windows)
2. You can do this either manually by adding these one by one or by simply formatting the drive (this however is destructive for data).
3. I therefore simply set the permissions correctly AFTER taking ownership of the drive and I was able to access the drive just fine.
4. To prove that its merely a permission issue where Windows 7 is arguabily behaving correctly, before making any permission changes, try booting your computer in Safe Mode and you should be able to access your data just fine while you are in the Safe Mode.
5. Lesson for me was to be very careful with NTFS permissions, especially while removing those present by default.
6. I managed to solve the issue before seeing this thread. Hence i do not know if "foreign drive" solution below would have worked in my case.
To Microsoft: This solution should be WAY more easier to find on the net. Hell, its shouldn't even be a be a problem! Windows should be able to reset the permissions to default with a single click on a non encrypted NTFS drive if the person trying to do this
has the administrator access.
Hope this allows people to save time and data.
Cheers!

'Access denied' when attempting to build/burn DVD, please help, urgent/desperate!

Recently bought CS3, overjoyed with most of it. Encore is giving me serious trouble though at the moment! The problem is that it simply will not burn to a dual layer disc! When we try to burn it to disc it begins the process, wizzing through different elements, then when it gets to 'sorting files'it stops with the message 'Access Denied' If we split the Wedding video in half it will burn to a standard DVD, but it will not burn to dual layer.We installed an additional, external writer in case the problem was with the hardware, but again it would not burn to dual layer. We attempted to build the dvd as an 'image' to the harddrive to then burn to dual layer through nero. This worked for a much smaller file, but when we tried to burn the larger file to the harddrive as an Image, 'Access Denied'!! We've tried everything we can think of, ...but if anyone else can think of a way to fix this, please let us know as we are in the final stages of the video project for a client and simply cannot get the project onto disc! When we 'check project', there are no errors listed. We've tried transcoding it to 7gb 1pass, and importing it from Premire pro without transcoding it, thereby letting Encore set the settings, but no joy. Thanks, Justin.

Rather than disabling UAC (or turning it down in Win7), just run Encore as Administrator. Right-click, and select Run As Administrator. Works fine for me in Windows 7 Professional 64 bit. Doing it this way you still get the benefits of UAC.

Change to https - access denied when calling catalog

Hi,
we use SRM7.0 and SRM-MDM catalog. So far we use https and everything works fine. Now we change to https and have problems when calling the catalog. There is a JavaScript error: Access denied.
In the html sourcecode we now have this:
action="https://:/sap/sapsrm/outbound_hdlr"
before there was:
action="http://<server>:8000/sap/sapsrm/outbound_hdlr"
I think we have forgot a setting. Any ideas?
Thanks and best regards,
Roman

Hello
We resolved the issue as follows:
Run SPRO
Go to Supplier Relationship Management -> SRM Server -> Master Data -> Content Management -> Define External Web Services
Select the catalogue
Double click Standard Call Structure
Add the following:
Parameter = BYPASS_OUTB_HANDLER, Value = X, Type = Fixed value
Parameter = BYPASS_INB_HANDLER, Value = X, Type = Fixed value
Click Save
The settings should take effect immediately.
Regards
Joe

Access Denied when trying to open a file that is encrypted on network share with EFS

I just recently enabled EFS on the default domain policy and created a new network share, encrypted a file and added myself to that file and tried to open the file from my workstation. I then receive an error "Access denied", I also tried
to create a file and encrypt it on that same share and get an error "The requested operation cannot be completed. The computer must be trusted for delegation and the current user account must be configured to allow delegation."
My steps.
1. Enable group policy for EFS, removed the expired certificate that was already there and Created a new Data recovery agent.
2. Created a network share, created a test file, enabled encryption on the file
3. certmgr.msc, personal and requested a new certificate, Basic EFS
4. On the network share and properties of file, advanced, details and added the user
5. from the workstation tried to access the file, Access Denied. I can create any file I won't just can't add attributes to encrypt the file or open an encrypted file
Now if I go to the server where the CA is located which is also the AD server and create share and run the same process it works as expected. I'm guessing I have to export the cert from the CA server as a pfx and import that to both the server that
has the network share and the workstation but that still doesn't seem to work. Maybe I don't understand how EFS works and this is not possible? Any suggestions would be appreciated.

You are correct in not understanding how EFS works.
When you connect to an encrypted file via a network share, the encryption/decryption takes place *on* the server. To enable over the network access, the server's computer account must be trusted for delegation.
The server actually impersonates the user and creates a user profile on the server (containing the defined EFS certificate and private key). The important thing to remember is that the files is transmitted in clear text from the server to the client.
See http://blogs.technet.com/b/instan/archive/2010/08/11/remote-efs-decryption-and-trusted-for-delegation-requirements.aspx
Brian

Windows 7 Open and Save As dialog box gives an "Access Denied" when using common Windows Explorer features.

On many computers in our environment we have issues in Windows 7 when using the Common Dialog Box. Within the dialog box we get the error Access Denied whenever we try to create a folder. If we try to rename a file it doesn't give an error but
it doesn't work either. We cannot delete a file, still no error, but we can create shortcut.
Within Windows Explorer of the same user it has no issues.
Even if we run an application as administrator it has the same results.
Example: Open Paint (right click "Run As Administrator"); then File, "Save As", right-click in empty space; then New, Folder. This caused the error to popup "Unable to create the folder 'New folder' Access is denied."
Thanks for your help,
Daniel

Hi Daniel,
How are things going? As the article provided above said, for such kind of issues generally it is caused by permission settings.
The article provided several possible solution and please let us know if there is anything unclear about the steps.
If you have any feedback on our support, please send to [email protected]

Access denied when upgrade SharePoint app in on premise deployment while it succeeds in fresh deployment

We deployed a SharePoint hosted app then used it for a while then we needed to upgrade it to be provider hosted app.
we used the same AppID and name with the new package then uploaded the package to the app catalog.
the old app in the site contents now has a note that there is a newer version and prompts to upgrade.
the upgrade fails with access denied even for site collection administrator.
is there really some permission issue or the upgrade can't be done?
We are volunteers, if the reply help you mark it as your answer. thanks!!

Hi,
According to your post, my understanding is that you got access denied error when upgrade the SharePoint hosted app to provider hosted app.
How did you upgrade a SharePoint hosted app to a provider hosted app?
They are two different type apps, why not just create a new provider hosted app?
To create a provider hosted app, we should create a certificate that is used as “security token issuer”.
There are two articles about creating provider hosted high trust app, you can have a look at them.
http://blog.karstein-consulting.com/2013/01/08/create-provider-hosted-high-trust-app-for-sharepoint-2013-short-guide/
http://msdn.microsoft.com/en-us/library/fp179901.aspx
What’s more, there is an topic about the troubleshooting tips for SharePoint high trust app, you can refer to it.
http://blogs.technet.com/b/speschka/archive/2012/11/01/more-troubleshooting-tips-for-high-trust-apps-on-sharepoint-2013.aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Access Denied when trying to access shared folders on the server with administrative privileges

I have problem accessing shared folder on the server machine from Windows 7 machine even if I try to access it with administrative privileges (server Administrator account). I will try now to explain better my situation.
In my company, we have small network infrastructure with one main server machine (HP ProLiant server) with Windows Server 2012 R2 installed and couple of desktop machines. The network is administrated by me.
On Windows Server we have installed and setup DHCP, DNS, Remote Access and Routing, File and Storage and Active Directory services. Desktop machines are having Windows 8.1 Pro, Windows 8.1 or Windows 7 Home Premium installed on them. In Active
Directory I have created domain, User groups and Users for employees in my company and so far, I didn't added desktop machines to the domain.
Also, I've created one folder on the server which should contain different projects data for network users and I have set access permissions and security for this folder and shared it on the network (I've added couple of users to one user group and I
gave Full control to this group over this folder). When I try to access this folder from network, I've been asked for login credentials (normally), where I just type in one of users username and password who has been given access permissions to (who is member
of group with full control over the folder). From Windows 8.1 Pro and Windows 8.1 machines I can access and work on this folder without any problems.
The problem comes with Windows 7 machines. On Windows 7 machines (I have also tried this with Windows 7 Ultimate in VMWare) I can access server, I can see its shares, but as soon I try to access folder I've created for projects, I get Access Denied message
with request for User login credentials. Whichever user account I use (even servers main Administrator account) I keep getting this message over and over and I'm unable to access it at all.
I have also tried to access the server through VPN (from local or outside) but I'm getting the same error again. Also I've tried to add these Windows 7 machines to the domain and login with domain user but the result is the same. Turned off both firewalls
(on server and desktop machines, which I know is unnecessary, but lets try it), still same case. I've tried couple more things with registry editor on desktop machines which I found on different forums and websites but still no luck. And now I don't know
what else I can do.
Does anyone knows what's the problem here, have I set something wrong, have not set something I should?

Hi MeipoXu,
thanks for your response. I will first answer on your question.
Yes, the main issue is that we can see the folder when we access the server but we cannot access its contents from Windows 7 machines. I have tried on two machines, one with Windows 7 Home Premium version and the other one with Windows 7 Ultimate version
and the situation is the same.
As you recommended, I've checked Network Discovery and File and Printer Sharing and the situation is next: File and Printer Sharing is turned on all layers (Private, Public and Domain) while Network Discovery is off for all layers too. I don't know if this
is normal thing but Network Discovery cannot be turned on in Windows Server (I'm able to select Turn on Network Discovery and apply the changes, but when I get back to this settings page, I again see that it's turned off, so I assume this can't be changed
at all).
I also tried with icacls in command prompt and everything seems to be ok there regarding permissions. Share permissions are set to Full control to Everyone and Security permissions are set to Full control only for Administrators and the user group I've created
for employees in my company. The confirmation for this is that on Windows 8 machines you can access this folder without any problem and without getting any message connected with access permissions with any user account within this user group. This share is
created through File and Storage Services service in Server Manager panel.
And then something came up on my mind. I went in Server Manager to check shared folder settings in File and Storage Services and under Settings page I saw that "Encrypt data access" has been enabled (I enabled this option because I thought
I will get more security with this option). I asked my self what would happen if I disable it, tried it and now everything works ok on Windows 7 machines too. Now I assume that Windows 7 doesn't have this feature implemented or there are some
settings which needs to be set on Windows 7 machines to make this encryption thing work with Windows Server. So basically, I will let this feature off for now until I find out more about it and how to implement it to work with all operating systems.
I want to thank you once more for your kind help!

"Access denied" when external WD HDD moved to Win8 machine

Similar Messages

Maybe you are looking for