Access denied when publishing?

Hi folks,
I've been publishing RH8 content to a folder on our network for a while and now it's telling me that Access is denied. Before I go and hassle the admin is there anything in RH that would cause this?
The funny thing is that I can manually copy the generated files into the folder so it just seems as though something is wrong with the publishing process in RH.
Anyway your help appreciated as always.
Nick.

Hi there
In addition to what my esteemed colleague Peter has advised, you might also check the source and destination for a file called thumbs.db. If you find it in either location, delete it. It's a Windows file that gets added to a folder when you view the folder using thumbnails view. And it can cause issues with publishing as Windows sees it as a system type file. So that sometimes throws the publishing process into a dither.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Similar Messages

  • Inconsistent "access denied" on publish

    I am at wits end. Am working on a project that involves some editing of one area on client's internal website. Used Contribute just fine for this last year. Now...
    When I try to Publish certain pages, I get the "Access denied. Page may not exist or there may be a permission problem." That is, this problem had existed on only SOME pages. Now, I can't publish on any of them.
    The permissions are set correctly for me to publish.
    No-one else has pages open. (Nobody in the organization knows how to use C anyway.)
    I would gladly pay someone to help with this. Hope someone can help.

    Was El Sobrante... Had to create a new user ID, etc. because could not log into account. Many cuss-words leap to mind at this point.
    No, the thread did not help. I had inconsistent "access denied" on publish for version 3 before I downloaded the trial new version. Same problem on version 5. Now I can't publish at all on any pages AND when I open version 3 it says the version is too old. Thought I'd uninstall 5 but it's the only version showing up. Can't imagine what's going to happen when the trial runs out.
    Anyway. Still need to fix the original problem.

  • Photoshop cs4 access denied when trying to install from disc in Windows 7 64bit.

    Photoshop cs4 access denied when trying to install from disc in Windows 7 64bit. I tried it in
    safe mode and it starts to install but get an error there as well.
    What do I do?

    So when you put the disk in it won't run correctly? When the disk is inserted you should have a window pop up with 2 options. 1 to install and the other to see what is on the disk. Choose to explore or open the disk. Go to the CS4 folder where the photoshop .exe file is (that will run the setup), right click on the .exe file and choose run as Admin and it should start. See if it will install. If not then read below.
    I am not sure how far you got in the install before so chances are you will have to run the CS4 cleanup utility. 2 levels to run at but don't use 1 or 2 just type in the number 3.
    http://www.adobe.com/support/contact/cs4clean.html
    You may need to run the windows installer cleanup utility too
    http://support.microsoft.com/kb/290301
    Before you try to reinstall the software ensure that adobe reader is not installed. If it is remove it. It has caused issues in the past with vista and CS4 installs.
    Also turn off windows Defender and any anti-virus software. You can keep UAC on in Windows 7.
    During the CS4 install at 90 percent it will almost stop and may take 5 to 10 mins to finish. This is normal. What a pain huh......
    After install is finished, reboot
    After reboot, go to the CS4 64 bit or 32 bit icon (depends on 32 or 64 bit Windows 7) in start area, right click on CS4 64 bit (if you have windows 7 64 bit) and choose properties, compatibility tab and then check run as Admin at the bottom area. Hit apply, ok to close out.
    Now start CS4 and run the updater.

  • Get "Access Denied" when click open a PDF file

    Hi Friends,
    Get "Access Denied" when click open a PDF file linked from SharePoint 2013 page.
    What are the route causes any one is remove the permissions are stopped the inheritance permissions of the library.
    Can anyone face the same issue please help me.
    Thanks,
    Tiru
    tirupal

    Hi,
    If you are able to open the same document earlier,then  anonymous access enabled on your doc library then.
    If you are facing this problem in first time,then you do not have required permission (may be custom permission level has been set ) on it.
    Murugesa Pandian.,MCTS|App.Development|Configure

  • Access Denied when Student Uploads Course in Drop Box

    All of a sudden we are getting access denied when a student tries to upload a course. We have not changed anything on our end. The tabs on the course page are set to drop box for student. The credentials sent over are:
    StudentBody@urn:mace:itunesu.com:sites:school.edu;Student@urn:mace:itunesu.com:s ites:school.edu:SPC16001002134
    The SPC16001002134 is the course identifier.
    Access to the course for student is set to download:
    Access Level: Download
    Credential Definition: Student@urn:mace:itunesu.com:sites:school.edu:${IDENTIFIER}
    Group Access Label: Student

    Hi,
    I need a bit more information. Can you please post your site's domain so that I can inspect it? It appears you have replaced this with school.edu.
    Thanks.

  • ORA-31050: Access denied when try to register XMLSchema

    Dear All
    I got ORA-31050: Access denied
    when tried to run to load XML schema with DBMS_XMLSCHEMA.registerSchema
    Can you advise me what privilege should I grant to the user?
    I tried grant XDBADMIN role but it does nto help
    Thank you in advance
    Artem Rodin

    Dear Mark!
    I realy need you help!
    I can successfully register schema which has complexType declaration as root element, like
    <schema targetNamespace="http://www.oracle.com/PO.xsd"
         xmlns:po="http://www.oracle.com/PO.xsd"
         xmlns="http://www.w3.org/2001/XMLSchema">
    <complexType name="PurchaseOrderType">
         <sequence>
              <element name="PONum" type="decimal"/>
              <element name="Company">
                   <simpleType>
                        <restriction base="string">
                             <maxLength value="100"/>
                        </restriction>
                   </simpleType>
              </element>
              <element name="Item" maxOccurs="1000">
                   <complexType>
                        <sequence>
                             <element name="Part">
                                  <simpleType>
                                       <restriction base="string">
                                            <maxLength value="1000"/>
                                       </restriction>
                                  </simpleType>
                             </element>
                             <element name="Price" type="float"/>
                        </sequence>
                   </complexType>
              </element>
         </sequence>
    </complexType>
    <!--element name="PurchaseOrder" type="po:PurchaseOrderType"/-->
    </schema>
    But I failed if in the root there is element like
    <schema targetNamespace="http://www.oracle.com/PO.xsd"
         xmlns:po="http://www.oracle.com/PO.xsd"
         xmlns="http://www.w3.org/2001/XMLSchema">
    <complexType name="PurchaseOrderType">
         <sequence>
              <element name="PONum" type="decimal"/>
              <element name="Company">
                   <simpleType>
                        <restriction base="string">
                             <maxLength value="100"/>
                        </restriction>
                   </simpleType>
              </element>
              <element name="Item" maxOccurs="1000">
                   <complexType>
                        <sequence>
                             <element name="Part">
                                  <simpleType>
                                       <restriction base="string">
                                            <maxLength value="1000"/>
                                       </restriction>
                                  </simpleType>
                             </element>
                             <element name="Price" type="float"/>
                        </sequence>
                   </complexType>
              </element>
         </sequence>
    </complexType>
    <element name="PurchaseOrder" type="po:PurchaseOrderType"/>
    </schema>
    I got the following error stack
    ORA-01031: insufficient privileges
    ORA-06512: at “XDB.DBMS_XDBZ0”, line 218
    ORA-06512: at “XDB.DBMS_XDBZ”, line 6
    ORA-06512: at line 1
    ORA-06512: at “XDB.DBMS_XMLSCHEMA_INT”, line 0
    ORA-06512: at “XDB.DBMS_XMLSCHEMA”, line 26
    ORA-06512: at “XDB.DBMS_XMLSCHEMA”, line 131
    ORA-06512: at “DVLP.PRIME_BRIDGE”, line 73
    ORA-06512: at line 7
    I guess you can reproduce this in-house,
    It's not my schema it is taken from
    XML Database Developer’s Guide - Oracle XML DB
    Structured Mapping of XMLType 5-3
    Example 5–1 XML Schema Definition, po.xsd
    As far as I understand in the second case Oracle tries to create a table to store XML content and fails to do it.
    User that I used has DBA role. What other privileges should I grant to the user? And/or I should grant some additional privileges to "XDB" user?
    This issue has become critical for me, so I am highly appreciate any assistance
    Many thanks in advance
    Best regards
    Artem Rodin

  • I receive "Database access denied" when trying to add component 4543BD

    I receive "Database access denied" when trying to add component 4543BD to my schematic. This component was added from a previous version. I'm using Multisim version 12.0.0  Student edition.
    Solved!
    Go to Solution.

    Hi Diarra,
    I checked my database and  the  4543 is not in the Student Edition. If you opened a schematic that was created in a higher version such as the Educaiton Edition and copied the part to your database, when you place this part you will get the access denied message. 
    Attached is a schematic with the part, you can open it and build you circuit around it.
    Tien P.
    National Instruments
    Attachments:
    4543.ms12 ‏62 KB

  • I get access denied when I try to search on your site.

    Please help me. I get access denied when I try to search on your site. I have emptied cache. I tried Safe Mode the way you suggested. Still access denied (though my printer then would not respond to me and I spent $85 to have my It consultant fix that problem.

    Hi,
    You've opened 3 different threads for the same issue. Please only open '''ONE''' thread per support request.
    Continue here [https://support.mozilla.org/en-US/questions/995124?esab=a&s=&r=3&as=s /questions/995124]
    Closing thread

  • I get access denied when I add a page to a workset in EP 7

    I get access denied when I add a page to a workset in EP 7.
    Please advice.

    Hello,
    This seems to be a permission issue. Assign the user id proper permission, say system_admin_role and then try.
    Regards
    Deb

  • Access Denied - while published

    Hello,
    Iam trying to publish the changes made on my machine to a
    server through the network.
    I have all permission (write/modify/delete) on that server,
    but when I use Robohelp, getting "Access Denied" error & unable
    to publish.
    Looks like this happens only to the Flash & XML files.
    Any ideas & Suggestions to fix this problem.
    Thank you in advance.
    Saangy

    Welcome, Saangy.
    You didn't mention what version of RoboHelp you are using or
    what kind of web server you are publishing to. A Windows web server
    (IIS)? A UNIX web server? RoboHelp Engine 4? RoboHelp Server 6?
    That said, (and not being an IT person) it sounds like a
    permissions problem involving your network and not RoboHelp itself.
    Just having write/modify/delete permissions is not the only
    thing that might cause problems. My guess is that you'll need the
    help of your network administrator.
    If you'd like to elaborate a bit more, we'll try to help.
    john

  • Get JMSSecurityException (access denied) when sending message to queue

    Hi, I am using weblogic8.1 sp2, assigned a security policy with my jms queue, the security policy states that only administrators may access the queue. Make sure that this queue does not inherit any security policy from its parents.
              My jms client tried to create connection with the correct username/password, and then send messages to the secure queue. The connection is created successfully, but send operation got a JMSSecurityException : access denied..... It is almost as if the send operation is not executed anonymously. I checked the jms API, there is only one place where I can specify username/password, that is when a connection is created. There is no place to specify credential for send/receive/publish/subscribe operation. Am I missing something? everything seems to be straightforward, can't believe it is not working, could it be a bug in weblogic8.1? Please post a reply if it worked for you.. or did not work (so that I know I am not alone)
              Thanks a lot.
              Haijun

    The security credentials for a JMS "send" operation are not taken from the username and password that you pass to the "createConnection" method, but from the security login context in effect when you call "send". So, if you want this to happen using a particular security context, you need to make sure that you have set this up before you make the call.
              There are a number of ways to do this in WLS. Your best bet would be to check the security documentation, or do ask on the security newsgroup for the best way to do this in 8.1.

  • Access Denied when uploading a file

    Just changed web hosting providers.
    I'm using Contribute 4. This problem only seems to happen
    when I'm linking a new file from our network (ie PDF file) into a
    Webpage to be published with the Webpage.
    I link the file, hit publish, get "Access Denied" and the
    Webpage is in edit mode. But if I go browse to the Webpage, the
    file successfully published and uploaded the PDF file. So it's like
    it's throwing the error directly after publishing the PDF file. I
    then just go into my draft Webpage and cancel the draft. Sounds
    like a weird permissions problem. Anybody ever have this
    happen?

    If you created the file(s) and then made sure the streams were closed and no other process/program was using the file(s), then it should delete.
    If you didn't create the files, you should look at the security policy on your system.

  • Access Denied when trying to open a file that is encrypted on network share with EFS

    I just recently enabled EFS on the default domain policy and created a new network share, encrypted a file and added myself to that file and tried to open the file from my workstation.  I then receive an error "Access denied", I also tried
    to create a file and encrypt it on that same share and get an error "The requested operation cannot be completed.  The computer must be trusted for delegation and the current user account must be configured to allow delegation."  
    My steps.
    1. Enable group policy for EFS, removed the expired certificate that was already there and Created a new Data recovery agent.
    2. Created a network share, created a test file, enabled encryption on the file 
    3. certmgr.msc, personal and requested a new certificate, Basic EFS
    4. On the network share and properties of file, advanced, details and added the user
    5. from the workstation tried to access the file, Access Denied.  I can create any file I won't just can't add attributes to encrypt the file or open an encrypted file
    Now if I go to the server where the CA is located which is also the AD server and create share and run the same process it works as expected.  I'm guessing I have to export the cert from the CA server as a pfx and import that to both the server that
    has the network share and the workstation but that still doesn't seem to work.  Maybe I don't understand how EFS works and this is not possible?  Any suggestions would be appreciated.

    You are correct in not understanding how EFS works.
    When you connect to an encrypted file via a network share, the encryption/decryption takes place *on* the server. To enable over the network access, the server's computer account must be trusted for delegation.
    The server actually impersonates the user and creates a user profile on the server (containing the defined EFS certificate and private key). The important thing to remember is that the files is transmitted in clear text from the server to the client.
    See http://blogs.technet.com/b/instan/archive/2010/08/11/remote-efs-decryption-and-trusted-for-delegation-requirements.aspx
    Brian

  • Windows 7 Open and Save As dialog box gives an "Access Denied" when using common Windows Explorer features.

    On many computers in our environment we have issues in Windows 7 when using the Common Dialog Box.  Within the dialog box we get the error Access Denied whenever we try to create a folder.  If we try to rename a file it doesn't give an error but
    it doesn't work either.  We cannot delete a file, still no error, but we can create shortcut.
    Within Windows Explorer of the same user it has no issues.
    Even if we run an application as administrator it has the same results.
    Example: Open Paint (right click "Run As Administrator"); then File, "Save As", right-click in empty space; then New, Folder.  This caused the error to popup "Unable to create the folder 'New folder'  Access is denied."
    Thanks for your help,
    Daniel

    Hi Daniel,
    How are things going? As the article provided above said, for such kind of issues generally it is caused by permission settings.
    The article provided several possible solution and please let us know if there is anything unclear about the steps. 
    If you have any feedback on our support, please send to [email protected]

  • Access denied when upgrade SharePoint app in on premise deployment while it succeeds in fresh deployment

    We deployed a SharePoint hosted app then used it for a while then we needed to upgrade it to be provider hosted app.
    we used the same AppID and name with the new package then uploaded the package to the app catalog.
    the old app in the site contents now has a note that there is a newer version and prompts to upgrade.
    the upgrade fails with access denied even for site collection administrator.
    is there really some permission issue or the upgrade can't be done?
    We are volunteers, if the reply help you mark it as your answer. thanks!!

    Hi,
    According to your post, my understanding is that you got access denied error when upgrade the SharePoint hosted app to provider hosted app.
    How did you upgrade a SharePoint hosted app to a provider hosted app?
    They are two different type apps, why not just create a new provider hosted app?
    To create a provider hosted app, we should create a certificate that is used as “security token issuer”.
    There are two articles about creating provider hosted  high trust app, you can have a look at them.
    http://blog.karstein-consulting.com/2013/01/08/create-provider-hosted-high-trust-app-for-sharepoint-2013-short-guide/
    http://msdn.microsoft.com/en-us/library/fp179901.aspx
    What’s more, there is an topic about the troubleshooting tips for SharePoint high trust app, you can refer to it.
    http://blogs.technet.com/b/speschka/archive/2012/11/01/more-troubleshooting-tips-for-high-trust-apps-on-sharepoint-2013.aspx
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

Maybe you are looking for