Access denied when remotely trying with Get-NlbClusterNode

When I locally, on the SMTP Cluster run this command:
Get-NlbClusterNode 
I get the output I need.
But if I try the same from a remote server (same network and domain) I get an:
[smtp-s001a]: PS C:\> Get-NlbClusterNode 
Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)) 
+ CategoryInfo          : 
+ FullyQualifiedErrorId : 
AccessDenied,Microsoft.NetworkLoadBalancingClusters.PowerShell.GetNlbClusterNode 
Why is that? It is ONLY the "Get-NlbClusterNODE" command that gives me access is denied. "Get-NlbCluster" for an example, works just fine.
 I am connecting as a Domain Administrator (which is a member of the Local Administrators Group on every node). Same account used remotely when I log on locally, where it works locally.
Any advice?
Thanks Horst MOSS 2007 Farm; MOSS 2010 Farm; TFS 2010; IIS 7.5

I run this script now:
cls
Import-Module NetworkLoadbalancingClusters -ErrorAction Stop
Write-Host "Every thing works fine"
Get-NlbClusternode
Get-ChildItem \\zserver\c$
Output:
Every thing works fine
Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
+ CategoryInfo         
: PermissionDenied: (Microsoft.Netwo...tNlbClusterNode:GetNlbClusterNode) [Get-NlbClusterNode], Unaut
horizedAccessException
+ FullyQualifiedErrorId : AccessDenied,Microsoft.NetworkLoadBalancingClusters.PowerShell.GetNlbClusterNode
+ PSComputerName        : zserver
Access is denied
+ CategoryInfo         
: PermissionDenied: (\\zserver\c$:String) [Get-ChildItem], UnauthorizedAccessException
+ FullyQualifiedErrorId : ItemExistsUnauthorizedAccessError,Microsoft.PowerShell.Commands.GetChildItemCommand
+ PSComputerName        : zserver
Cannot find path '\\zserver\c$' because it does not exist.
+ CategoryInfo         
: ObjectNotFound: (\\zserver\c$:String) [Get-ChildItem], ItemNotFoundException
+ FullyQualifiedErrorId : PathNotFound,Microsoft.PowerShell.Commands.GetChildItemCommand
+ PSComputerName        : zserver
Thanks Horst MOSS 2007 Farm; MOSS 2010 Farm; TFS 2010; IIS 7.5

Similar Messages

  • Access denied when using IdentityXML with WebGate

    Hello,
    Here is our setup:
    - COREid Identity 7.0.4,
    - COREid Access 7.0.4,
    - WebPass,
    - WebGate,
    - IIS 6 (hosting the identity application)
    We enabled the default policies to protect the /identity URL.
    We are using webservice calls (using C# with WSDL proxies) to query the identity server from other applications.
    Prior to enabling the Access policies this was working fine, now we get an Access denied error message.
    It looks like WebGate is blocking the IDXML calls.
    Does anyone knows what is causing this problem and how to solve it ?
    My first guess was to use the Access SDK to build an obSSOCookie and join it to the request, however the developper guide doesn't provide may examples on how to practically do this. Will it solve my problem ?
    Thank in advance,
    Franck

    Thanks for your answer.
    I eventually found a workaround for this problem.
    Actually you don't need to provide an SSO cookie the first time you connect to the webgate server, you just need to provide basic credentials and the webgate will provide you an SSO cookie that you can use for the next call.
    The problem is that this doesn't work out of the box with the .NET/WSDL framework for some reason (with Java + the HTTPClient library I had no problem).
    I had to had manually the following headers to the HTTP request to make it work:
    Authentication: Basic XXXXXXXX
    Cookie: OBBasicAuth=fromDialog
    Where XXXXXXXX is a base64 encoded string containing "login:password"
    Thanks,
    Franck

  • Access Denied when trying to open a file that is encrypted on network share with EFS

    I just recently enabled EFS on the default domain policy and created a new network share, encrypted a file and added myself to that file and tried to open the file from my workstation.  I then receive an error "Access denied", I also tried
    to create a file and encrypt it on that same share and get an error "The requested operation cannot be completed.  The computer must be trusted for delegation and the current user account must be configured to allow delegation."  
    My steps.
    1. Enable group policy for EFS, removed the expired certificate that was already there and Created a new Data recovery agent.
    2. Created a network share, created a test file, enabled encryption on the file 
    3. certmgr.msc, personal and requested a new certificate, Basic EFS
    4. On the network share and properties of file, advanced, details and added the user
    5. from the workstation tried to access the file, Access Denied.  I can create any file I won't just can't add attributes to encrypt the file or open an encrypted file
    Now if I go to the server where the CA is located which is also the AD server and create share and run the same process it works as expected.  I'm guessing I have to export the cert from the CA server as a pfx and import that to both the server that
    has the network share and the workstation but that still doesn't seem to work.  Maybe I don't understand how EFS works and this is not possible?  Any suggestions would be appreciated.

    You are correct in not understanding how EFS works.
    When you connect to an encrypted file via a network share, the encryption/decryption takes place *on* the server. To enable over the network access, the server's computer account must be trusted for delegation.
    The server actually impersonates the user and creates a user profile on the server (containing the defined EFS certificate and private key). The important thing to remember is that the files is transmitted in clear text from the server to the client.
    See http://blogs.technet.com/b/instan/archive/2010/08/11/remote-efs-decryption-and-trusted-for-delegation-requirements.aspx
    Brian

  • Photoshop cs4 access denied when trying to install from disc in Windows 7 64bit.

    Photoshop cs4 access denied when trying to install from disc in Windows 7 64bit. I tried it in
    safe mode and it starts to install but get an error there as well.
    What do I do?

    So when you put the disk in it won't run correctly? When the disk is inserted you should have a window pop up with 2 options. 1 to install and the other to see what is on the disk. Choose to explore or open the disk. Go to the CS4 folder where the photoshop .exe file is (that will run the setup), right click on the .exe file and choose run as Admin and it should start. See if it will install. If not then read below.
    I am not sure how far you got in the install before so chances are you will have to run the CS4 cleanup utility. 2 levels to run at but don't use 1 or 2 just type in the number 3.
    http://www.adobe.com/support/contact/cs4clean.html
    You may need to run the windows installer cleanup utility too
    http://support.microsoft.com/kb/290301
    Before you try to reinstall the software ensure that adobe reader is not installed. If it is remove it. It has caused issues in the past with vista and CS4 installs.
    Also turn off windows Defender and any anti-virus software. You can keep UAC on in Windows 7.
    During the CS4 install at 90 percent it will almost stop and may take 5 to 10 mins to finish. This is normal. What a pain huh......
    After install is finished, reboot
    After reboot, go to the CS4 64 bit or 32 bit icon (depends on 32 or 64 bit Windows 7) in start area, right click on CS4 64 bit (if you have windows 7 64 bit) and choose properties, compatibility tab and then check run as Admin at the bottom area. Hit apply, ok to close out.
    Now start CS4 and run the updater.

  • ACCESS DENIED when trying to use custom site template to create new Subsite

    I am trying to create a new site using a custom template. I am the new admin here at the company. Other also are having "access denied" errors when trying to create the site using these custom templates. 
    However I can still create a site using the out of the box templates. I have given myself site collection admin (primary) and I am a farm administrator as well. Any ideas on why I keep getting access denied to specific templates?
    The entire site collection is using the custom template. When I try to create a new site under the site collection with a custom template now, it says "access denied". Any ideas?
    Thanks!
    Note - I am able to use the Custom Site Templates in the test environment without any issues. Only in the production/live environment am I getting the access denied error.

    I am not finding anything that comes up in the ULS logs about the access denied. I tried creating the site in the test environment using the custom template and it worked. I go to the production environment and try to create the site with the same template
    and get "error:access denied - current user domain\user" I checked in the ULS logs as soon as the access denied appears (pretty quickly after pressing create) and there is nothing at that specific time. This is a huge problem, is there any way to
    work around or fix this? I'm a new admin.

  • I receive "Database access denied" when trying to add component 4543BD

    I receive "Database access denied" when trying to add component 4543BD to my schematic. This component was added from a previous version. I'm using Multisim version 12.0.0  Student edition.
    Solved!
    Go to Solution.

    Hi Diarra,
    I checked my database and  the  4543 is not in the Student Edition. If you opened a schematic that was created in a higher version such as the Educaiton Edition and copied the part to your database, when you place this part you will get the access denied message. 
    Attached is a schematic with the part, you can open it and build you circuit around it.
    Tien P.
    National Instruments
    Attachments:
    4543.ms12 ‏62 KB

  • When I download itunes, it says that Ipod Service failed to start. I checked the services under task manager and when I try to start it, it says access denied. How to I get access and for the ipod service to start and run?

    Please help. My ipod classic could not be recognised by itunes when I connect my ipod to PC. Previously it has been recognised before I updated. This was a while ago now and so I removed all apple files and re installed the latest itunes but am having the same problem.
    When I download itunes, it says that Ipod Service failed to start. I checked the services under task manager and when I try to start it, it says access denied. How to I get access and for the ipod service to start and run?

    Some anti-virus programs (e.g., McAfee) have this rule that can be invoked under the "maximum protection" settings: PREVENT PROGRAMS REGISTERING AS A SERVICE. If that rule is set to BLOCK, then any attempt to install or upgrade iTunes will fail with an "iPod service failed to start" message.
    If you are getting this problem with iTunes, check to see if your anti-virus has this setting and unset it, at least for as long as the iTunes install requires. Exactly how to find the rule and turn it on and off will vary, depending upon your anti-malware software. However, if your anti-virus or anti-malware software produces a log of its activities, examining the log may help you find the problem.
    For example, here's the log entry for McAfee:
    9/23/2009 3:18:45 PM Blocked by Access Protection rule NT AUTHORITY\SYSTEM C:\WINDOWS\system32\services.exe \REGISTRY\MACHINE\SYSTEM\ControlSet001\Services\iPod Service Common Maximum Protection:Prevent programs registering as a service Action blocked : Create
    Note that the log says "Common Maximum Protection: Prevent programs registering as a service". The "Common Maximum Protection" is the location of the rule, "Prevent programs registering as a service" is the rule. I used that information to track down the location in the McAfee VirusScan Console where I could turn the rule off.
    After I made the change, iTunes installed without complaint.

  • HT1212 my i phone screen is black  i cannot access anything. i am trying to get my photos off of it and when i connect to i tunes it says my phone has a passcode which i cannot enter because my phone is black

    my i phone screen is black  i cannot access anything. i am trying to get my photos off of it and when i connect to i tunes it says my phone has a passcode which i cannot enter because my phone is black

    It's too late. If you had been syncing your phone with that computer prior to the screen failing, it wouldn't be asking you for a passcode...

  • Access denied when trying to edit conf file in DW

    I want to connect Dreamweaver to Mysql, but keep gett an error saying I can't connect to mysql_pconnect.  I'm trying to edit the connection_php_mysql file but when I try to save changes I keep getting access denied.  How can I get the program to accept the change?

    Hi me148me,
    Can you check out the following post and see if it helps? http://forums.adobe.com/thread/725471
    Thanks,
    Preran

  • I get access denied when I try to search on your site.

    Please help me. I get access denied when I try to search on your site. I have emptied cache. I tried Safe Mode the way you suggested. Still access denied (though my printer then would not respond to me and I spent $85 to have my It consultant fix that problem.

    Hi,
    You've opened 3 different threads for the same issue. Please only open '''ONE''' thread per support request.
    Continue here [https://support.mozilla.org/en-US/questions/995124?esab=a&s=&r=3&as=s /questions/995124]
    Closing thread

  • Get "Access Denied" when click open a PDF file

    Hi Friends,
    Get "Access Denied" when click open a PDF file linked from SharePoint 2013 page.
    What are the route causes any one is remove the permissions are stopped the inheritance permissions of the library.
    Can anyone face the same issue please help me.
    Thanks,
    Tiru
    tirupal

    Hi,
    If you are able to open the same document earlier,then  anonymous access enabled on your doc library then.
    If you are facing this problem in first time,then you do not have required permission (may be custom permission level has been set ) on it.
    Murugesa Pandian.,MCTS|App.Development|Configure

  • I get access denied when I add a page to a workset in EP 7

    I get access denied when I add a page to a workset in EP 7.
    Please advice.

    Hello,
    This seems to be a permission issue. Assign the user id proper permission, say system_admin_role and then try.
    Regards
    Deb

  • Access Denied when Student Uploads Course in Drop Box

    All of a sudden we are getting access denied when a student tries to upload a course. We have not changed anything on our end. The tabs on the course page are set to drop box for student. The credentials sent over are:
    StudentBody@urn:mace:itunesu.com:sites:school.edu;Student@urn:mace:itunesu.com:s ites:school.edu:SPC16001002134
    The SPC16001002134 is the course identifier.
    Access to the course for student is set to download:
    Access Level: Download
    Credential Definition: Student@urn:mace:itunesu.com:sites:school.edu:${IDENTIFIER}
    Group Access Label: Student

    Hi,
    I need a bit more information. Can you please post your site's domain so that I can inspect it? It appears you have replaced this with school.edu.
    Thanks.

  • ORA-31050: Access denied when try to register XMLSchema

    Dear All
    I got ORA-31050: Access denied
    when tried to run to load XML schema with DBMS_XMLSCHEMA.registerSchema
    Can you advise me what privilege should I grant to the user?
    I tried grant XDBADMIN role but it does nto help
    Thank you in advance
    Artem Rodin

    Dear Mark!
    I realy need you help!
    I can successfully register schema which has complexType declaration as root element, like
    <schema targetNamespace="http://www.oracle.com/PO.xsd"
         xmlns:po="http://www.oracle.com/PO.xsd"
         xmlns="http://www.w3.org/2001/XMLSchema">
    <complexType name="PurchaseOrderType">
         <sequence>
              <element name="PONum" type="decimal"/>
              <element name="Company">
                   <simpleType>
                        <restriction base="string">
                             <maxLength value="100"/>
                        </restriction>
                   </simpleType>
              </element>
              <element name="Item" maxOccurs="1000">
                   <complexType>
                        <sequence>
                             <element name="Part">
                                  <simpleType>
                                       <restriction base="string">
                                            <maxLength value="1000"/>
                                       </restriction>
                                  </simpleType>
                             </element>
                             <element name="Price" type="float"/>
                        </sequence>
                   </complexType>
              </element>
         </sequence>
    </complexType>
    <!--element name="PurchaseOrder" type="po:PurchaseOrderType"/-->
    </schema>
    But I failed if in the root there is element like
    <schema targetNamespace="http://www.oracle.com/PO.xsd"
         xmlns:po="http://www.oracle.com/PO.xsd"
         xmlns="http://www.w3.org/2001/XMLSchema">
    <complexType name="PurchaseOrderType">
         <sequence>
              <element name="PONum" type="decimal"/>
              <element name="Company">
                   <simpleType>
                        <restriction base="string">
                             <maxLength value="100"/>
                        </restriction>
                   </simpleType>
              </element>
              <element name="Item" maxOccurs="1000">
                   <complexType>
                        <sequence>
                             <element name="Part">
                                  <simpleType>
                                       <restriction base="string">
                                            <maxLength value="1000"/>
                                       </restriction>
                                  </simpleType>
                             </element>
                             <element name="Price" type="float"/>
                        </sequence>
                   </complexType>
              </element>
         </sequence>
    </complexType>
    <element name="PurchaseOrder" type="po:PurchaseOrderType"/>
    </schema>
    I got the following error stack
    ORA-01031: insufficient privileges
    ORA-06512: at “XDB.DBMS_XDBZ0”, line 218
    ORA-06512: at “XDB.DBMS_XDBZ”, line 6
    ORA-06512: at line 1
    ORA-06512: at “XDB.DBMS_XMLSCHEMA_INT”, line 0
    ORA-06512: at “XDB.DBMS_XMLSCHEMA”, line 26
    ORA-06512: at “XDB.DBMS_XMLSCHEMA”, line 131
    ORA-06512: at “DVLP.PRIME_BRIDGE”, line 73
    ORA-06512: at line 7
    I guess you can reproduce this in-house,
    It's not my schema it is taken from
    XML Database Developer’s Guide - Oracle XML DB
    Structured Mapping of XMLType 5-3
    Example 5–1 XML Schema Definition, po.xsd
    As far as I understand in the second case Oracle tries to create a table to store XML content and fails to do it.
    User that I used has DBA role. What other privileges should I grant to the user? And/or I should grant some additional privileges to "XDB" user?
    This issue has become critical for me, so I am highly appreciate any assistance
    Many thanks in advance
    Best regards
    Artem Rodin

  • I had FF version 9. When I tried to get on FF I recevied error code 404 not on server. I uninstalled ff and reinstalled version 12. Still get code 404. Help

    I have Windows XP. I cannot access FF. when I do I get error code 404 and the message " the URL/firefox was not found on this server". It started today, I had FF version 9. I uninstalled that and reinstalled version 12, but still get same error when trying to access FF.
    PS: Other browsers work fine

    Didn't you open Firefox and go to google.com?

Maybe you are looking for

  • Bridge or Photoshop Elements?

    Greetings, I just bought Dreamweaver CS4. I've already been using Photoshop Elements 6 to manage my photos, so is there any benefit to using Bridge, in addition to Photoshop Elements? Thanks, Shane.

  • Image is not displaying in page

    hi frnds i m uploading image , and then displaying image , but image is not displaying this code written in ONINPUTPROCESSING  and this code is working fine but problem is this the value if diplay_url is getting blank when it comes in layout * To Dis

  • Boosting wireless reception on iMac G5?

    The rural community I live in has recently set up a satellite-based WiFi network for the locals to use. The main signal is brought in, then repeated out to several remote access points within the community. One of these points is directly opposite my

  • Business Graphics Tool - Series

    Hello All, I have developed a Graph using the Business Graphics charting tool. The application is a Web Dynpro application. My graph has to display two lines (or range of values). In order to do that, I have created two Data Series, to which I pass v

  • What do I do when I get   "Could not save as because of a program error"?

    I'm useing CS5 and when saving my file, i get this message.  "Could not save as because of a program error"  How do I get past this???  HELP HELP HELP