Access denied when saving fla originated on another computer

How can this be avoided when a team is working on the files?
A large website, many fla files and many are opened/changed then
saved... Files are usually created on one computer then downloaded
to another for some work (through local network) and sent back and
forth this way... until now we have been saving in a new folder
each time, but there are well over 30 files in some sites... anyway
to avoid this?
all computers are Mac... an iMac G5, a powerbook and a
PowerMac G5 all with 10.4.7 or 10.4.6 with Flash Pro 8

I'm a PC guy, Permissions in Windows Active Directory causes
similar problems, maybe your network has something similar. Running
crossways with a source control system could do that too.
Dreamweaver has source control built in - is anyone in your group
trying to run that? And SWFs included in a web build are getting
entangled?
Anyway, source control for your work group is a good idea.
Files are kept in one place on a server, a developer 'checks the
file out' to work on it, returns it to the same place when done.
Everyone knows where to go, only one person at a time can work on a
file, older versions are kept transparently in a 'history', backups
of the entire project are easy to set up.

Similar Messages

  • Access Denied when saving file - CS5 & Win7

    Using Dreamweaver CS5 and Win7...  Sporatically, I will try to save my .html file and will get an error saying "access denied" to the .tmp file.  So I do a "Save As" to another file name and then the original file literally disappears (is deleted / erased) from my hard drive.  No where to be found!
    Has anyone else had this experience?  Is there a work around?
    Godspeed,
    Omar

    Here's the solution (as I learned from other forum posts):
    - Disable the Preview Pane in Windows 7...
    or
    - Simply "deselect" the file in Windows Explorer (thus deactivating the "Preview" of the file) and try to save it again.  The "Save As" dialog will appear and you can save it with the same name.
    What is actually happening:
    When a file is selected in Windows Explorer and the Preview Pane is enabled, Windows 7 displays the file (and locks it).  If the file is also open in Dreamweaver and any modifications are made, the file is considered a temp (.tmp) file by Windows as it is already in use by the Preview Pane (and locked).  When you try to save the modified file in Dreamweaver, you get the "Access Denied" error.  If you go into Windows Explorer and deselect the file, the file will disappear (be deleted / removed) as Windows now considers it a "temp" file that is no longer being previewed. At this time (assuming you didn't close the file in Dreamweaver) you can try to save it again and a "Save As" dialog will open (since the original file was deleted).
    Hope this helps!
    Godspeed,
    Omar

  • Access Denied when saving in Vista

    Hello everyone,
    On some occasions, when I'm editing my website and saving a CSS file a message popups saying access to the file is denied. If I try to delete or rename the file with Windows Explorer it also says access denied. It seems the file is locked because I cant open it in any program, delete it or rename it.
    After about 10 minutes, the file is back to normal. Im on Windows Vista, with Dw Cs4 and I use Firefox to test my website.
    I've tried to take permission of the folder and Dreamweaver isnt saving using a temp file. Anyone have any ideas?
    Thanks

    This is a "feature" of Vista's security system. The solution is in the reply from Badcrew in the following page: http://thevistaforums.com/index.php?showtopic=13343.
    How did I find the answer? By typing access denied vista into the Search Forums field at the top right of this page. The search system in this forum is quite powerful, so it's always worth trying.

  • Why is access denied when saving page

    Getting denied access when trying to save a page in CS5.5.  Had to load on new computer after other one crashed.

    Which operating system.
    In general, a file cannot be saved if it is open in another program such as Windows preview.

  • Access Denied When Saving

    I just "upgraded" to Windows 7.  Now, I cannot edit my dreamweaver CS4 files and save them to my folder.  It says "access (folder) was denied".  Furthermore, when I do change the files and try to view them in either IE or FF, it shows a connection error.  Any thoughts?
    Thanks
    Steve

    Can you find anything useful here?
    http://kb2.adobe.com/cps/508/cpsid_50853.html

  • Photoshop cs4 access denied when trying to install from disc in Windows 7 64bit.

    Photoshop cs4 access denied when trying to install from disc in Windows 7 64bit. I tried it in
    safe mode and it starts to install but get an error there as well.
    What do I do?

    So when you put the disk in it won't run correctly? When the disk is inserted you should have a window pop up with 2 options. 1 to install and the other to see what is on the disk. Choose to explore or open the disk. Go to the CS4 folder where the photoshop .exe file is (that will run the setup), right click on the .exe file and choose run as Admin and it should start. See if it will install. If not then read below.
    I am not sure how far you got in the install before so chances are you will have to run the CS4 cleanup utility. 2 levels to run at but don't use 1 or 2 just type in the number 3.
    http://www.adobe.com/support/contact/cs4clean.html
    You may need to run the windows installer cleanup utility too
    http://support.microsoft.com/kb/290301
    Before you try to reinstall the software ensure that adobe reader is not installed. If it is remove it. It has caused issues in the past with vista and CS4 installs.
    Also turn off windows Defender and any anti-virus software. You can keep UAC on in Windows 7.
    During the CS4 install at 90 percent it will almost stop and may take 5 to 10 mins to finish. This is normal. What a pain huh......
    After install is finished, reboot
    After reboot, go to the CS4 64 bit or 32 bit icon (depends on 32 or 64 bit Windows 7) in start area, right click on CS4 64 bit (if you have windows 7 64 bit) and choose properties, compatibility tab and then check run as Admin at the bottom area. Hit apply, ok to close out.
    Now start CS4 and run the updater.

  • Get "Access Denied" when click open a PDF file

    Hi Friends,
    Get "Access Denied" when click open a PDF file linked from SharePoint 2013 page.
    What are the route causes any one is remove the permissions are stopped the inheritance permissions of the library.
    Can anyone face the same issue please help me.
    Thanks,
    Tiru
    tirupal

    Hi,
    If you are able to open the same document earlier,then  anonymous access enabled on your doc library then.
    If you are facing this problem in first time,then you do not have required permission (may be custom permission level has been set ) on it.
    Murugesa Pandian.,MCTS|App.Development|Configure

  • Access Denied when Student Uploads Course in Drop Box

    All of a sudden we are getting access denied when a student tries to upload a course. We have not changed anything on our end. The tabs on the course page are set to drop box for student. The credentials sent over are:
    StudentBody@urn:mace:itunesu.com:sites:school.edu;Student@urn:mace:itunesu.com:s ites:school.edu:SPC16001002134
    The SPC16001002134 is the course identifier.
    Access to the course for student is set to download:
    Access Level: Download
    Credential Definition: Student@urn:mace:itunesu.com:sites:school.edu:${IDENTIFIER}
    Group Access Label: Student

    Hi,
    I need a bit more information. Can you please post your site's domain so that I can inspect it? It appears you have replaced this with school.edu.
    Thanks.

  • ORA-31050: Access denied when try to register XMLSchema

    Dear All
    I got ORA-31050: Access denied
    when tried to run to load XML schema with DBMS_XMLSCHEMA.registerSchema
    Can you advise me what privilege should I grant to the user?
    I tried grant XDBADMIN role but it does nto help
    Thank you in advance
    Artem Rodin

    Dear Mark!
    I realy need you help!
    I can successfully register schema which has complexType declaration as root element, like
    <schema targetNamespace="http://www.oracle.com/PO.xsd"
         xmlns:po="http://www.oracle.com/PO.xsd"
         xmlns="http://www.w3.org/2001/XMLSchema">
    <complexType name="PurchaseOrderType">
         <sequence>
              <element name="PONum" type="decimal"/>
              <element name="Company">
                   <simpleType>
                        <restriction base="string">
                             <maxLength value="100"/>
                        </restriction>
                   </simpleType>
              </element>
              <element name="Item" maxOccurs="1000">
                   <complexType>
                        <sequence>
                             <element name="Part">
                                  <simpleType>
                                       <restriction base="string">
                                            <maxLength value="1000"/>
                                       </restriction>
                                  </simpleType>
                             </element>
                             <element name="Price" type="float"/>
                        </sequence>
                   </complexType>
              </element>
         </sequence>
    </complexType>
    <!--element name="PurchaseOrder" type="po:PurchaseOrderType"/-->
    </schema>
    But I failed if in the root there is element like
    <schema targetNamespace="http://www.oracle.com/PO.xsd"
         xmlns:po="http://www.oracle.com/PO.xsd"
         xmlns="http://www.w3.org/2001/XMLSchema">
    <complexType name="PurchaseOrderType">
         <sequence>
              <element name="PONum" type="decimal"/>
              <element name="Company">
                   <simpleType>
                        <restriction base="string">
                             <maxLength value="100"/>
                        </restriction>
                   </simpleType>
              </element>
              <element name="Item" maxOccurs="1000">
                   <complexType>
                        <sequence>
                             <element name="Part">
                                  <simpleType>
                                       <restriction base="string">
                                            <maxLength value="1000"/>
                                       </restriction>
                                  </simpleType>
                             </element>
                             <element name="Price" type="float"/>
                        </sequence>
                   </complexType>
              </element>
         </sequence>
    </complexType>
    <element name="PurchaseOrder" type="po:PurchaseOrderType"/>
    </schema>
    I got the following error stack
    ORA-01031: insufficient privileges
    ORA-06512: at “XDB.DBMS_XDBZ0”, line 218
    ORA-06512: at “XDB.DBMS_XDBZ”, line 6
    ORA-06512: at line 1
    ORA-06512: at “XDB.DBMS_XMLSCHEMA_INT”, line 0
    ORA-06512: at “XDB.DBMS_XMLSCHEMA”, line 26
    ORA-06512: at “XDB.DBMS_XMLSCHEMA”, line 131
    ORA-06512: at “DVLP.PRIME_BRIDGE”, line 73
    ORA-06512: at line 7
    I guess you can reproduce this in-house,
    It's not my schema it is taken from
    XML Database Developer’s Guide - Oracle XML DB
    Structured Mapping of XMLType 5-3
    Example 5–1 XML Schema Definition, po.xsd
    As far as I understand in the second case Oracle tries to create a table to store XML content and fails to do it.
    User that I used has DBA role. What other privileges should I grant to the user? And/or I should grant some additional privileges to "XDB" user?
    This issue has become critical for me, so I am highly appreciate any assistance
    Many thanks in advance
    Best regards
    Artem Rodin

  • I receive "Database access denied" when trying to add component 4543BD

    I receive "Database access denied" when trying to add component 4543BD to my schematic. This component was added from a previous version. I'm using Multisim version 12.0.0  Student edition.
    Solved!
    Go to Solution.

    Hi Diarra,
    I checked my database and  the  4543 is not in the Student Edition. If you opened a schematic that was created in a higher version such as the Educaiton Edition and copied the part to your database, when you place this part you will get the access denied message. 
    Attached is a schematic with the part, you can open it and build you circuit around it.
    Tien P.
    National Instruments
    Attachments:
    4543.ms12 ‏62 KB

  • I get access denied when I try to search on your site.

    Please help me. I get access denied when I try to search on your site. I have emptied cache. I tried Safe Mode the way you suggested. Still access denied (though my printer then would not respond to me and I spent $85 to have my It consultant fix that problem.

    Hi,
    You've opened 3 different threads for the same issue. Please only open '''ONE''' thread per support request.
    Continue here [https://support.mozilla.org/en-US/questions/995124?esab=a&s=&r=3&as=s /questions/995124]
    Closing thread

  • I get access denied when I add a page to a workset in EP 7

    I get access denied when I add a page to a workset in EP 7.
    Please advice.

    Hello,
    This seems to be a permission issue. Assign the user id proper permission, say system_admin_role and then try.
    Regards
    Deb

  • "Access Denied" when opening a PDF in a browser

    Hi,
    I have a problem I can't solve.
    I'm creating a intranet website. In this, i want display PDF but the browser reply "Access DenIed".
    I stock my PDFs in a network drive where i have the rights on folders and files.
    I try to unckeck "Enable protected mode" but no change.
    I try to open with another PDF reader (Foxit) and it works, but i want keep Adobe by default reader
    for my users.
    I have the last version of Abobe Reader XI (11.0.05.3).
    Thanks.

    ... and/or
    Configure Adobe Reader to not use a Web Browser to open PDF documents... (see the Adobe.com for admx files to apply this setting by group policy) (
    http://forums.adobe.com/thread/392489 )
    Start>Adobe Reader>Edit>Preferences>Internet>uncheck "Display PDF in browser"
    It seems that Adobe have recently changed the location of that setting in Adobe Reader (at least on 11.0.4).  They've now hidden it under Edit > Accessibility > Setup Assistant > Then on page 5 of 5, there's a tick box to toggle 'Display PDF
    documents in the Web Browser'.
    However, it doesn't work like it used to though, as it won't just open a PDF in Adobe Reader instead of the browser.  It will instead ask to disable Enhanced Protected Mode to run acroPDF.dll. 
    And if you try disabling the Adobe PDF reader add-on in Manage Add-ons to try and force it to open in Reader, then when you visit a PDF link, you just get the same blank page (shown below) with the black crossed out circle in the top left, but without the
    message bar at the bottom of the window.  The only way to open the PDF is to either turn off Enhanced Protected Mode and allow acroPDF.dll to run or if there's an original link to the PDF, right click and select 'save-as'.
    I think it's about time Adobe released an x64 PDF viewer...  Or at least there should be an open/save dialogue box in IE.
    If you've got Reader 11.0.4 installed, you can try it for yourself with this PDF link:
    http://helpx.adobe.com/pdf/adobe_reader_reference.pdf
    (The below screenshot is with 'Display PDF documents in the Web Browser' UN-ticked in Adobe Reader settings, so it should open in Reader instead.  But it doesn't.  And with the Reader add-on disabled you get the same page, but without the
    message at the bottom.)

  • Access denied when jsp writes to a`network  file system

    Hi
    Can anyone help. Im having big problems with my web application which was working fine when it was hosted on a tomcat windows NT machine. The application was recently upgraded to a Windows 2000 machine. My jsp page which has to write to a network drive can no longer do so. I keep getting ACCESS DENIED.
    My jsp page is as follows:
    <html>
    <head><title>test</title></head>
    <body>This is a test page
    <jsp:useBean
    id="sendSMS"
    scope="page"
    class="podsystembeans.phonetrackbeans.FileWrite"
    />
    <%
    String sms = sendSMS.testIO();
    out.println(sms);
    %>
    </body></html>My javabean is as follows:
    package podsystembeans.phonetrackbeans;
    import java.io.*;
    public class FileWrite
         public String testIO(){
              try{
                       // Create file
                  FileWriter fstream = new FileWriter("R:/outt.txt");
                 BufferedWriter out = new BufferedWriter(fstream);
                  out.write("Hello Java");
                  //Close the output stream
                  out.close();
              }catch (Exception e){//Catch exception if any
                System.out.println("Error testing : " + e.getMessage());
         return "success";
    }OBSERVATION
    If i try and write the file to the local machine for example C and D drives then it works. If i try and write the file to R drive which is another windows 2000 machine then i get access denied. Also if i try and write to a L drive which is a windows NT machine then i get the same message too.
    If i run the above bean as a stand alone application with
    public static void main
    and I run it then it will work and write to any drive on the network.
    Everytime my application fails to write to the network drive my windows machine shows the mapped drives with a red cross on it. I have applied the latest service packs and i have followed microsofts suggestions editing the registry autodisconnect keys. But i am still having problems and it is my java app which is causing it.
    SETTINGS
    Windows 2000 service pack 4
    Tomcat 5 installed on d drive
    java 5 installed on c drive
    mapped network drives to other machines , the network is a 192.168.1.x network
    regards
    antek

    Hi
    Thanks for the pointer, I am trying to follow the suggestion and I want to know is the server.policy same as catalina.policy in tomcat under the conf folder. Also in this policy do i write the ip addresses of the machines i want to access?
    Thanks
    Antek

  • Access Denied When Trying To Install Printer - Windows 7

    Good Day
    I have a serious problem on a client's computer. All I need to do is connect the laptop to a network printer, but I am having a lot of difficulty in doing so.
    First the details of the laptop: Windows 7 Professional 64-bit connected to network using ETH cable. Avira Professional antivirus running, firewall disabled on pc, user is member of administrators group only.
    Details of the printer: Xerox Workcentre 3220, connect to network using ETH cable, but also shared on pc also running Windows 7 64-bit Professional.
    I am able to ping the printer and have connected all the other pcs on the network to the printer without any troubles whatsoever. Printing, scanning - everything is working fine for the other pcs. I am also able to connect to shares from the laptop to any
    other pc.
    So here is my issue with this specific laptop:
    Firstly, when using the "Add Printer" wizard, the "Add a local printer" option is greyed out.
    So I tried connecting to the printer using the"Add a network, wireless or Bluetooth printer" option, which seemed to be working, but during installation it gives an Access Denied error and undoes the installation.
    Then I tried connecting to the share of the printer on one of the other pcs, which had the exact same result.
    I then tried to modify an other printer, by firstly trying to add a new Local Port, but the I recieve the following error: "Specified port cannot be added. Access is denied."
    I tried then adding the driver using the Windows Print Server, but the buttons were unavailable.
    After reading on many forums, I accessed the Print Management console (Control Panel -> Administrative Tools -> Print Management)m and tried adding the printer and ports there, but recieved an "Access Denied" error every time.
    Basically whatever I tried, I recieved "Access Denied" errors. I created a new user, which is only a member of the Administrators group. Logged in with new user, without any success in connecting to the printer. I then tried adding security permisssions
    for "everyone" to the folder C:\Windows\System32\spool\PRINTERS, as I read on another forum. I tried modifying the group policy using gpedit.msc and also using the Local Security Policy, although I could have missed some things in these two places,
    but basically with a quick glance, everything seemed fine. I am sure there are no virusses, etc on this laptop and as I have said all the other pcs connected to the printer very easily.
    How can it be that I cant install a printer on this laptop, while I was able to do so a year or so back?
    I have gotten a few suggestions that it will in the end just save me time by formatting the pc and reloading all the data and programs, but this isn't an option I really want to take. And then I have previously had issues with the "Add a local printer"
    option greyed out and unable to add printers, etc, but then I was able to solve the problem by creating a new user and then switching to that user - which indicated a possible user profile corruption. But in this case even that did not work.

    Hi,
    please check your below configuration:
    1.Start the policy editor (Control Panel -> Administrative tools -> Local security policy)
    2.Select “Local policy” item
    3.Find the item “Devices: Prevent Users from Installing Printer Drivers” in the section Security Settings -> Security Options and change it to Enabled
    4.Go to “Security Settings -> User Rights Assignment” section and check, that “Load & Unalod Drivers” option contains the active user group. It important, that even if it has “All Staff” already, it still could miss “Administrators” group, so it’s necessary
    to add it manually.
    In addition, this thread could be referred:
    http://social.technet.microsoft.com/Forums/en-US/8c3c3d97-9d85-4ab0-9fc8-4b7aba202fb2/windows-cannot-connect-to-the-printer-access-is-denied-please-help?forum=itprovistaprinting
    Karen Hu
    TechNet Community Support

Maybe you are looking for