Access Denied when uploading a file

Just changed web hosting providers.
I'm using Contribute 4. This problem only seems to happen
when I'm linking a new file from our network (ie PDF file) into a
Webpage to be published with the Webpage.
I link the file, hit publish, get "Access Denied" and the
Webpage is in edit mode. But if I go browse to the Webpage, the
file successfully published and uploaded the PDF file. So it's like
it's throwing the error directly after publishing the PDF file. I
then just go into my draft Webpage and cancel the draft. Sounds
like a weird permissions problem. Anybody ever have this
happen?

If you created the file(s) and then made sure the streams were closed and no other process/program was using the file(s), then it should delete.
If you didn't create the files, you should look at the security policy on your system.

Similar Messages

Access Denied when uploading documents

Hi,
An end user who has design permission on a particular site gets access denied page when user clicks on "OK" in upload document dialog box.
but document is uploaded and is checked-out.
We checked features, permission they are all same on the all the sites(with issue or without this issue)
Regards,
AnkitG

Hi Ankit,
Based on your description, it seems that you have add item permission but no edit item permission on the library.
I recommend to go to the library permission of the library with issue and then click Check Permissions in the ribbon to check the permission for your account.
If that is the case, then grant the necessary permission to the user on the library or click Delete unique permissions in the ribbon to inherit the permission from the site.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Access Denied when Open Offline File.

Dear All,
User has Network Share (with full permission to access files and Folders), I have configure it as an Offline folder (Always available).
Problem is that when on network he can access and open all the files. But when he goes offline (No Network), he can open all the Folders but when he tried to open some files few of them are giving errors. "Access Denied"
Encryption is not enable.
Can anyone please suggest the resolution.
Thanks
Kamran
Best Regards

Hi,
Please make sure all these file are enabled offline.
Please see if this article is helpful to you:
Users may receive an "Access is denied" error message if you make files and folders available for offline use
http://support.microsoft.com/kb/275461
Meanwhile, try this:
1.Make sure that your files and folder have been synchronized. Reinitializing the cache prior to synchronizing will
cause you to lose any data that isn’t synchronized.
2.Click Start, type regedit in the Start Search box, and then press
ENTER.
If you are prompted for an administrator password or for a confirmation, type the password, or click Continue.
3.Locate the following registry subkey, and then right-click it:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\CSC
4.Point to New, and then click Key.
5.Type Parameters in the box.
6.Right-click Parameters, point to New, and then click DWORD (32-bit)Value.
7.Type FormatDatabase, and then press ENTER.
8.Right-click FormatDatabase, and then click Modify.
9.In the Value data box, type 1, and then click OK.
10.Exit Registry Editor, and then restart the computer.
Karen Hu
TechNet Community Support

Access denied when I move files from MacBook to desktop

When move files from my MacBook Pro to my G5 desktop, I can't open them. I get an "access denied" message. I can fix the problem by going to "info" and changing the access, but how can I fix this so it doesn't happen at all? I don't want to have the hassle of resetting the access for each file every time I swap files back and forth between the laptop and desktop.

Ask and you will receive:
You can do the same thing in terminal using the chmod command, but it requires a bit more of a learning curve.
Leo server has a Built in GUI that allows you to do the same thing as Sandbox, I really feel Apple should have included something similar in the consumer version of Leo, since we are forced to deal with ACL's in Leo whether we want to or not. They are turned on by default and can only be turned off temporarily (fsaclctl command) as they will resume automatically at the next reboot.
Of course you must master the basics before attempting
ACL's from the command line.
Here are some links to some Leo ACL and command line documents:
http://www.afp548.com/filemgmt/index.php?id=40
http://manuals.info.apple.com/enUS/Command_Line_Adminv10.5.pdf
http://manuals.info.apple.com/enUS/File_Services_Adminv10.5.pdf
http://developer.apple.com/documentation/Darwin/Reference/ManPages/man1/chmod.1. html
These tools will guide you in your quest.
And don't forget grasshopper: "wax on - wax off"
Kj

Access denied when putting a file in the System32 folder.

Hi,
I have this code in de Program.cs:
TrialMaker t = new TrialMaker("TMTest1",
Application.StartupPath + "\\RegFile.reg",
Environment.GetFolderPath(Environment.SpecialFolder.System) +
"\\TMSetp.dbf",
"Phone: +98 21 88281536\nMobile: +98 912 2881860",
5, 10, "745");
It must put a file called TMSetp.dbf in the system32-folder of the Windwows-folder.
But I get error: Access to the path 'C:\Windows\system32\TMSetp.dbf' is denied.
What can I do about this problem?
Greetings,
Peter Kiers

It must put a file called TMSetp.dbf in the system32-folder of the Windwows-folder.
But I get error: Access to the path 'C:\Windows\system32\TMSetp.dbf' is denied.
What can I do about this problem?
Either:
1. Run your code in a process that has sufficient permission to write
to that directory, or
2. Write the file elsewhere - where you have permission.
Dave

Get "Access Denied" when click open a PDF file

Hi Friends,
Get "Access Denied" when click open a PDF file linked from SharePoint 2013 page.
What are the route causes any one is remove the permissions are stopped the inheritance permissions of the library.
Can anyone face the same issue please help me.
Thanks,
Tiru
tirupal

Hi,
If you are able to open the same document earlier,then anonymous access enabled on your doc library then.
If you are facing this problem in first time,then you do not have required permission (may be custom permission level has been set ) on it.
Murugesa Pandian.,MCTS|App.Development|Configure

Access Denied when Student Uploads Course in Drop Box

All of a sudden we are getting access denied when a student tries to upload a course. We have not changed anything on our end. The tabs on the course page are set to drop box for student. The credentials sent over are:
StudentBody@urn:mace:itunesu.com:sites:school.edu;Student@urn:mace:itunesu.com:s ites:school.edu:SPC16001002134
The SPC16001002134 is the course identifier.
Access to the course for student is set to download:
Access Level: Download
Credential Definition: Student@urn:mace:itunesu.com:sites:school.edu:${IDENTIFIER}
Group Access Label: Student

Hi,
I need a bit more information. Can you please post your site's domain so that I can inspect it? It appears you have replaced this with school.edu.
Thanks.

Access Denied when saving file - CS5 & Win7

Using Dreamweaver CS5 and Win7... Sporatically, I will try to save my .html file and will get an error saying "access denied" to the .tmp file. So I do a "Save As" to another file name and then the original file literally disappears (is deleted / erased) from my hard drive. No where to be found!
Has anyone else had this experience? Is there a work around?
Godspeed,
Omar

Here's the solution (as I learned from other forum posts):
- Disable the Preview Pane in Windows 7...
or
- Simply "deselect" the file in Windows Explorer (thus deactivating the "Preview" of the file) and try to save it again. The "Save As" dialog will appear and you can save it with the same name.
What is actually happening:
When a file is selected in Windows Explorer and the Preview Pane is enabled, Windows 7 displays the file (and locks it). If the file is also open in Dreamweaver and any modifications are made, the file is considered a temp (.tmp) file by Windows as it is already in use by the Preview Pane (and locked). When you try to save the modified file in Dreamweaver, you get the "Access Denied" error. If you go into Windows Explorer and deselect the file, the file will disappear (be deleted / removed) as Windows now considers it a "temp" file that is no longer being previewed. At this time (assuming you didn't close the file in Dreamweaver) you can try to save it again and a "Save As" dialog will open (since the original file was deleted).
Hope this helps!
Godspeed,
Omar

Access denied. Error in File C:\WINDOWS\TEMP\

I have searched on Google and all over this forum and none of the solutions have fixed my problem.
Crystal Version: Crsytal.Net for Visual Studio.Net 2005
Server: Windows Server 2003
Error:
Access denied. Error in File C:\WINDOWS\TEMP\JuryDutyReport {D6296178-3E72-483E-B876-2DFC03D00841}.rpt: Access to report file denied. Another program may be using it.
When I run my app locally through the Web Server that comes with ASP.Net, everything is fine, it is only when I deploy the application to the Windows 2003 Server that I get the error.
I'm using impersonation in my ASP.Net application. I have given that domain user full access to 'C:\Windows\Temp'', the export folder and even the folder where the Crystal Report resides on the Server. When I run the application on the Web Server, I actually see the ".rpt" get created in the "C:\Windows\Temp" folder but yet it still says there is a permissions error.
What is bizarre is that the code below that just sends the file to the printer automatically works:
private void PrintJuryDutyReport(DataSet ds)
        //create report document
        ReportDocument crDoc = new ReportDocument();
        //load, set datasource and print options
        crDoc.Load(Server.MapPath("~/Reports/JuryDutyReport.rpt"));
        crDoc.SetDataSource(ds); //set datasource
        crDoc.PrintOptions.PrinterName = ddlPrinters.SelectedValue.ToString(); //set printername
        crDoc.PrintOptions.PaperOrientation = PaperOrientation.Portrait; //set paper orientation
        crDoc.SetParameterValue("ParamUsername", User.Identity.Name); //set parameter
        crDoc.PrintToPrinter(1, false, 0, 0); //send to printer
I have to change the code to export to a PDF and this code doesn't work:
    private void PrintJuryDutyReport(DataSet ds)
        //report document
        ReportDocument crDoc = new ReportDocument();
        string myfile = @"G:\COPFS\COPFSPROD\ReportsTemp\MyPDF.pdf";
        //load, set datasource and print options
        crDoc.Load(Server.MapPath("~/Reports/JuryDutyReport.rpt"));
        crDoc.SetDataSource(ds); //set datasource
        crDoc.SetParameterValue("ParamUsername", User.Identity.Name); //set parameter
        //export through http
        crDoc.ExportToDisk(ExportFormatType.PortableDocFormat, myfile);
        crDoc.Close();
        crDoc.Dispose();
        Response.ClearContent();
        Response.ClearHeaders();
        Response.ContentType = "Application/pdf";
        Response.AppendHeader("content-disposition", "attachment; filename=" + myfile);
        Response.WriteFile(myfile);
        Response.Flush();
        Response.Close();
Any help is greatly appreciated as I have to present this to end users tomorrow.

Don, thanks for the response.
As a last ditch effort, I granted "modify" to the Network Service Account on C:\Windows\Temp and that fixed the error.
There are two things that are troubling about this:
1) I'm impersonating a domain user in my ASP.Net application and when the PDF is created, the owner is that domain user, so I know impersonation is working. So I wonder if ASP.Net picks and chooses what account it runs under at different times?
2) It is a little scary for the Network Service Account to have this access but that people seem to be fine with it.
http://aspadvice.com/blogs/rjdudley/archive/2005/03/14/2566.aspx

Photoshop cs4 access denied when trying to install from disc in Windows 7 64bit.

Photoshop cs4 access denied when trying to install from disc in Windows 7 64bit. I tried it in
safe mode and it starts to install but get an error there as well.
What do I do?

So when you put the disk in it won't run correctly? When the disk is inserted you should have a window pop up with 2 options. 1 to install and the other to see what is on the disk. Choose to explore or open the disk. Go to the CS4 folder where the photoshop .exe file is (that will run the setup), right click on the .exe file and choose run as Admin and it should start. See if it will install. If not then read below.
I am not sure how far you got in the install before so chances are you will have to run the CS4 cleanup utility. 2 levels to run at but don't use 1 or 2 just type in the number 3.
http://www.adobe.com/support/contact/cs4clean.html
You may need to run the windows installer cleanup utility too
http://support.microsoft.com/kb/290301
Before you try to reinstall the software ensure that adobe reader is not installed. If it is remove it. It has caused issues in the past with vista and CS4 installs.
Also turn off windows Defender and any anti-virus software. You can keep UAC on in Windows 7.
During the CS4 install at 90 percent it will almost stop and may take 5 to 10 mins to finish. This is normal. What a pain huh......
After install is finished, reboot
After reboot, go to the CS4 64 bit or 32 bit icon (depends on 32 or 64 bit Windows 7) in start area, right click on CS4 64 bit (if you have windows 7 64 bit) and choose properties, compatibility tab and then check run as Admin at the bottom area. Hit apply, ok to close out.
Now start CS4 and run the updater.

Code doesn't update when uploading new files to website.

code doesn't update when uploading new files to website. I was using an old DW version for a long time then forced to upgrade when I bought my MacBook Pro. Now when I make changes to my pages and link to new files etc on my harddrive, when i upload the pages it won't image because the code still points to harddrive (this did not used to be a problem)... I manually changed the code on the web host site to point to the site and it loaded fine. But now my files on my harddrive also point to the web host files and now don't image on my computer. I never had to worry about this so far and wonder if the new version has a setting I'm supposed to be aware of so that I can design on my hardrive and upload and it knows that the files are being uploaded with it? Ugh hpe this makes sense - I'm NOT a webs designer and the new DW is way more than I use in it's technology.

Hi
This sounds like you have not defined your site in the site definition.
Follow the steps in these 2 tutorials to set-up your site locally and for the remote server -
http://www.adobe.com/devnet/dreamweaver/articles/first_website_pt1.html
http://www.adobe.com/devnet/dreamweaver/articles/first_website_pt6.html
PZ

How do I change the default folder that opens when uploading a file to the internet from my mac? (at the moment it automatically defaults to 'Downloads' folder)

How do I change the default folder that opens when uploading a file to the internet from my mac? (at the moment it automatically defaults to 'Downloads' folder)
For example...
I am on a webiste and wish to upload a photo.
I click on select file on the website
Finder opens and defaults to 'Downloads' folder (it happens with all wesbites)
How do I change this?

I am on a webiste and wish to upload a photo.
I click on select file on the website
You are attempting to download the picture to your computer not uploading photo to the website if I am understanding you correctly.
To change the download direction, you must do so through your browser's Preferences. If you are using Safari, hopefully, someone who uses Safari will help you and/or post over in their forums. I do not use Safari.
If using Firefox>Preferences>General>Save Files to:

ORA-31050: Access denied when try to register XMLSchema

Dear All
I got ORA-31050: Access denied
when tried to run to load XML schema with DBMS_XMLSCHEMA.registerSchema
Can you advise me what privilege should I grant to the user?
I tried grant XDBADMIN role but it does nto help
Thank you in advance
Artem Rodin

Dear Mark!
I realy need you help!
I can successfully register schema which has complexType declaration as root element, like
<schema targetNamespace="http://www.oracle.com/PO.xsd"
     xmlns:po="http://www.oracle.com/PO.xsd"
     xmlns="http://www.w3.org/2001/XMLSchema">
<complexType name="PurchaseOrderType">
     <sequence>
          <element name="PONum" type="decimal"/>
          <element name="Company">
               <simpleType>
                    <restriction base="string">
                         <maxLength value="100"/>
                    </restriction>
               </simpleType>
          </element>
          <element name="Item" maxOccurs="1000">
               <complexType>
                    <sequence>
                         <element name="Part">
                              <simpleType>
                                   <restriction base="string">
                                        <maxLength value="1000"/>
                                   </restriction>
                              </simpleType>
                         </element>
                         <element name="Price" type="float"/>
                    </sequence>
               </complexType>
          </element>
     </sequence>
</complexType>

</schema>
But I failed if in the root there is element like
<schema targetNamespace="http://www.oracle.com/PO.xsd"
     xmlns:po="http://www.oracle.com/PO.xsd"
     xmlns="http://www.w3.org/2001/XMLSchema">
<complexType name="PurchaseOrderType">
     <sequence>
          <element name="PONum" type="decimal"/>
          <element name="Company">
               <simpleType>
                    <restriction base="string">
                         <maxLength value="100"/>
                    </restriction>
               </simpleType>
          </element>
          <element name="Item" maxOccurs="1000">
               <complexType>
                    <sequence>
                         <element name="Part">
                              <simpleType>
                                   <restriction base="string">
                                        <maxLength value="1000"/>
                                   </restriction>
                              </simpleType>
                         </element>
                         <element name="Price" type="float"/>
                    </sequence>
               </complexType>
          </element>
     </sequence>
</complexType>
<element name="PurchaseOrder" type="po:PurchaseOrderType"/>
</schema>
I got the following error stack
ORA-01031: insufficient privileges
ORA-06512: at “XDB.DBMS_XDBZ0”, line 218
ORA-06512: at “XDB.DBMS_XDBZ”, line 6
ORA-06512: at line 1
ORA-06512: at “XDB.DBMS_XMLSCHEMA_INT”, line 0
ORA-06512: at “XDB.DBMS_XMLSCHEMA”, line 26
ORA-06512: at “XDB.DBMS_XMLSCHEMA”, line 131
ORA-06512: at “DVLP.PRIME_BRIDGE”, line 73
ORA-06512: at line 7
I guess you can reproduce this in-house,
It's not my schema it is taken from
XML Database Developer’s Guide - Oracle XML DB
Structured Mapping of XMLType 5-3
Example 5–1 XML Schema Definition, po.xsd
As far as I understand in the second case Oracle tries to create a table to store XML content and fails to do it.
User that I used has DBA role. What other privileges should I grant to the user? And/or I should grant some additional privileges to "XDB" user?
This issue has become critical for me, so I am highly appreciate any assistance
Many thanks in advance
Best regards
Artem Rodin

I receive "Database access denied" when trying to add component 4543BD

I receive "Database access denied" when trying to add component 4543BD to my schematic. This component was added from a previous version. I'm using Multisim version 12.0.0 Student edition.
Solved!
Go to Solution.

Hi Diarra,
I checked my database and the 4543 is not in the Student Edition. If you opened a schematic that was created in a higher version such as the Educaiton Edition and copied the part to your database, when you place this part you will get the access denied message.
Attached is a schematic with the part, you can open it and build you circuit around it.
Tien P.
National Instruments
Attachments:
4543.ms12 ‏62 KB

I get access denied when I try to search on your site.

Please help me. I get access denied when I try to search on your site. I have emptied cache. I tried Safe Mode the way you suggested. Still access denied (though my printer then would not respond to me and I spent $85 to have my It consultant fix that problem.

Hi,
You've opened 3 different threads for the same issue. Please only open '''ONE''' thread per support request.
Continue here [https://support.mozilla.org/en-US/questions/995124?esab=a&s=&r=3&as=s /questions/995124]
Closing thread

Access Denied when uploading a file

Similar Messages

Maybe you are looking for