Access Denied while integrating WD appl into Portal

Hi all,
I have created one appl in WD that can access details from R/3. Whenever I run the appl, the data is automatically populated from R/3 into dropdown list. It is working fine in my NWDS.
I have integrated this appl in to Enterprise Portal. Now when i execute that appl, I am getting
'Access Denied error'. (The data is not poulating into my dropdown list).
But I have integrated the FlightList appl, into Enterprise Portal, which is working fine.
Is there any settings/configurations needs to be done before integrating my appl into EP?
Thanks&regards,
Ganesh

Hi,
For the Web Dynpro application which fetches data from R/3 system, you have to establish JCO destionation in Portal->Content Administration->Web Dynpro. Open you application from the portal content list in the left panel. In the right check for the JCO connection. If not existing, create JCO with the required credentials of the R/3 system, like client, message server, userid/pwd or Ticket, userid, password. After testing/ping is successful, your application will work fine in the portal.
Regards,
Srinivasan T

Similar Messages

I got access denied while integrating WebDynpro appl into EP

Hi all,
I have created one appl in WD that can access details from R/3. Whenever I run the appl, the data is automatically populated from R/3 into dropdown list. It is working fine in my NWDS.
I have integrated this appl in to Enterprise Portal. Now when i execute that appl, I am getting
<b>'Access Denied error'.</b> (The data is not poulating into my dropdown list).
But I have integrated the FlightList appl, into Enterprise Portal, which is working fine.
Is there any settings/configurations needs to be done before integrating my appl into EP?
Thanks&regards,
Ganesh

Hi,
See the follwoing threads:
"Access denied" on drop-down list UI element when integrated in an iView
Re: "Access denied" on drop-down list UI element when integrated in an iVie
Kind Regards,
S.Saravanan.

Runtime error occured while integrating WD appl into Portal?!@#

Hi all,
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Application URL ':///webdynpro/dispatcher/local/Example_FL/ExampleFLApp' is not valid! Please check the protocol and host entries for system 'SAP_R3'..
See the details for the exception ID in the log file
This is the error that I got while integrating WD appl into Portal. I have Created a Folder in Content Administrator->Niew iView->com.sap.portal.appintegrator.sap
then selected Webdynpro.
Followed by created an iView by selecting appropriate settings. What went wrong. But the WD appl is working fine individually. Please help me
regards,
Ganesh

Hi,
Have you create IView properly?.
Here is the step-by-step procedure to create a web dynpro iView in portal:
1. Logon to portal.
2. Content Administration->Portal Content.
3. Right Click on the folder 'Portal Content'.
4. Select 'iView' ->'New'
5. In the Template Selection, select 'SAP Web Dynpro iView' and click 'Next'
6. In the 2nd step, Give iView Name and iView ID and a prefix. Next.
7. Select application variant, say, 'Java' in the 3rd step. Next.
8. In the 4th step, select the System (Your WAS System), give the project name of your webdynpro, like, local/ABC_Project in the WebDynproNameSpace. In the Application Name, enter the application name of your Web Dynpro Application, say ABC_App. Next.
9. Finish.
10. In the left panel, now you will see an iView has been created.
11. Create necessary role/workset and assign this iView for an user.
Hope this helps.
Kind Regards,
S.Saravanan.

Getting an error as "Access denied" while writing the data into CRM 2013?

Hi,
I have written code in Script component Transformation to connect CRM 2013. I have used CRM 2013 SDK to connect it.
#region
Help: Introduction to the Script Component
/* The Script Component allows you to perform virtually any operation that can be accomplished in
* a .Net application within the context of an Integration Services data flow.
* Expand the other regions which have "Help" prefixes for examples of specific ways to use
* Integration Services features within this script component. */
#endregion
#region
Namespaces
using
System;
using
System.Data;
using
Microsoft.SqlServer.Dts.Pipeline.Wrapper;
using
Microsoft.SqlServer.Dts.Runtime.Wrapper;
using
Microsoft.Xrm.Sdk;
using
Microsoft.Xrm.Sdk.Query;
using
Microsoft.Xrm.Sdk.Client;
using
Microsoft.Xrm.Sdk.Messages;
using
System.ServiceModel;
using
System.ServiceModel.Description;
#endregion
[Microsoft.SqlServer.Dts.Pipeline.
SSISScriptComponentEntryPointAttribute]
public
classScriptMain:
UserComponent
//This
method is called once, before rows begin to be processed in the data flow.
///You
can remove this method if you don't need to do anything here.
IOrganizationServiceorganizationservice;
// Variables for the CRM webservice credentials
// You could also declare them in the PreExecute
// if you don't use it anywhere else
stringCrmUrl =
stringCrmDomainName =
stringCrmUserName =
stringCrmPassWord =
publicoverridevoidPreExecute()
base.PreExecute();
         * Add your code here
CrmUrl =
this.Variables.CrmWebservice.ToString();
        CrmDomainName =
this.Variables.CrmDomainName.ToString();
        CrmUserName =
this.Variables.CrmUserName.ToString();
        CrmPassWord =
this.Variables.CrmPassWord.ToString();
// Connect to webservice with credentials
ClientCredentialscredentials =
newClientCredentials();
        credentials.UserName.UserName =
string.Format("{0}\\{1}",
CrmDomainName, CrmUserName);//"[email protected]";
        credentials.UserName.Password = CrmPassWord;
        organizationservice =
newOrganizationServiceProxy(newUri(CrmUrl),
null, credentials,
null);
///This
method is called after all the rows have passed through this component.
///You
can delete this method if you don't need to do anything here.
//</summary>
publicoverridevoidPostExecute()
base.PostExecute();
         * Add your code here
///<summary>
///This
method is called once for every row that passes through the component from Input0.
//<param
name="Row">The row that is currently passing through the component</param>
publicoverridevoidInput0_ProcessInputRow(Input0BufferRow)
         * Add your code here
EntityContact =
newEntity("Contact");
   Contact["Employeeid"] = Row.EmpId;
if (!Row.Prefix_IsNull)
    Contact["MiddleName"] = Row.Prefix;
organizationservice.Create(Contact);
I was getting an error when the Create method is called from Organizationservice object and it is executing fine till that method. Could you please suggest me how to go further on this?
Thanks &amp; Regards, Anil

Hi Anil,
You want to make sure you use lower case for both CRM entity and field names.
In any case, writing a custom script component to talk to CRM may not sound terribly hard, but as soon as you get more business requirements and you deal with more entities, you will find it is not something trivial.
For this reason, we highly recommend you check out a commercial offering which will actually save you a lot of time and effort. Check out our solution at http://www.kingswaysoft.com/products/ssis-integration-toolkit-for-microsoft-dynamics-crm/ for
further details, we offer many integration features for Microsoft Dynamics CRM you can't find elsewhere, such as Upsert, Text Lookup, many-to-many relationship support, various writing actions, etc.
Disclaimer: I work for KingswaySoft
Daniel Cai | http://danielcai.blogspot.com |
@danielcai | Data Integration made easy with
SSIS Integration Toolkit

Access denied:com.sap.ip.bi.web.portal.integration.launcher

Hi Friends,
I have installed a Standalone Portal ( EP, EP core, BI Java) , configured LDAP as data source and imported the Portal content from Source system . ( in Development, Quality, Production)
I completed all configuration and testing completed.
But the portal user created with customized iviews roles are working fine in Development and Production.
But ....Access denied:com.sap.ip.bi.web.portal.integration.launcher error is encountered in Quality system.
In QAS system, while installation I have selected EP, EP core as Usage type.. and after Insatllation I have installed additional Usage tye BI JAVA using JSPM
Whereas in DEV, PRD ( EP, EP core, BI Java) were taken as Usage types while installation only..
Above reason may effect the Test user for access denied error.
Please suggest.
Thanks
Venkat

Ramana,
It looks like a permissions issue, right click on the system created for BI under System Admin-System Configuration-System landscape and open the permissions and ensure you have the everyone group added there and enduser checked.
Good Luck!
Sandeep Tudumu

Access denied while opening any PDF the second time / Zugriff verweigert beim zweiten Öffnen eines beliebigen PDF

Reader produces "Access denied" while opening any PDF the second time. A LogOut/LogIn or restart is necessary to open a PDF again successfully. User works with a PC (Win7). The file is located on the desktop in a Windows 2008/2012 AD, user profile on networkshare. The same procedure with a file located on any other networkshare or locally on harddisk works without error. Analysis with processmonitor indicates that the file seems to load and then is cancelled for some unknown reason. The problem is somehow growing, beginning with 1 PC and exists now also in our Citrix environment (2 users). Access rights seem to ok and the same on all tested shares (full Access or Change rights).
Der Reader bringt den Fehler "Zugriff verweigert", wenn man das zweite mal ein PDF öffnen will. Dabei ist der Fehler völlig unabhängig davon, ob man das gleiche oder ein anderes PDF öffnen will. Um wieder erfolgreich ein PDF zu öffnen, ist ein Ab- und Anmelden bzw. ein Neustart des PCs (Win7) nötig. Umgebung ist eine Windows 2008/2012 AD, Profil liegt im Netz. Der Fehler tritt nur bei PDFs auf, die auf dem User-Desktop liegen. Sind die Dateien irgendwo anders im Netz oder lokal auf der Festplatte, kommt der Fehler nicht. Eine Analyse mit dem Prozessmonitor zeigt, dass das Laden des PDFs irgendwann gecancelt wird, warum auch immer. Das Problem scheint sich auch langsam auszuweiten. Es hat mit einem PC begonnen und tritt nun auch in unserer Citrix Umgebung bei bis jetzt 2 Usern auf. Die Berechtigungen scheinen überall ok und gleich zu sein (Volluzgriff oder Ändern).

ls -l /var/run/lighttpd/
And how are you spawning the php instances? I don't see that in the daemons array anywhere.
EDIT: It looks like the info in that page is no longer using pre-spawned instances, but lighttpd adaptive-spawn. The documentation has been made inconsistent it looks like.
You will note that with pre-spawned information, the config looks different[1].
You need to do one or the other, not both (eg. choose adaptive-spawn, or pre-spawn..not both).
[1]: http://wiki.archlinux.org/index.php?tit … oldid=8051 "change"

Error 406 access denied while trying to Add Windows 2008 HV host in SCVMM 2008.

I am trying to add Windows 2008 HV host in SCVMM 2008. While adding host i am getting error message...
Error (406)
Access
has been denied while contacting the server <server name>.
Recommended
Action
1.
Verify that the specified user account has administrative privileges on <server name>.
2.
Verify that DCOM access, launch, and activation permissions are enabled on <server name> for the Administrators group. Use dcomcnfg.exe to modify
permissions, and then try the operation again.
I have already done DCOM security modification for my user. I am able to RDP or any file sharing HV host from SCVMM machine. My user is member of local administrator for both the machines.
Before that i have added one Windows 2008 HV (Core) successfully and 2 ESX host in same SCVMM machine.
Any Help would be greatly appreciated.
vaibhav

Has anyone found a fix for this? I've been troubleshooting this issue for 4 days now. I've unjoined/rejoined the host to the domain, deleted SCVMM certificate, given permissions (out the wahzoo) in COM/Access Permissions, all updates installed, firewall
is off (I even tried turning it on and configuring program/port access), I've tried with 3 different domain accounts that are a member of the local Administrators group.
The other day I managed to get the host added (don't ask me how) but then all the VM's were in status 'Host not responding' so I couldn't even manage them. So I removed it and now can't get the host added again. I'm using SCVMM 2008 R2 SP1 and the problem
host is Server 2008 R2 SP1 x64.
Error (406)
Access has been denied while contacting the server xxxxxxxx.domain.com.
Recommended Action
1. Verify that the specified user account has administrative privileges on xxxxxxx.domain.com.
2. Verify that DCOM access, launch, and activation permissions are enabled on xxxxxxx.domain.com for the Administrators group. Use dcomcnfg.exe to modify permissions, and then try the operation again.
I was getting this error after I got the host added:
Error (2910)
VMM does not have appropriate permissions to access the resource C:\Windows\system32\qmgr.dll on the xxxxxxxx.domain.com server.
(Access is denied (0x80070005))
Recommended Action
Ensure that Virtual Machine Manager has the appropriate rights to perform this action.

Access denied while loading jar files from client

I am creating a platform
that can be started by JWS
and then load plug-ins from client drive.
I've signed my platform (packaged as a jar file),
and set up the security tag in my jnlp,
so that it can access client files.
The plug-ins are packaged as jar files.
And in one of the plug-ins, there is a class that has a JFileChooser field.
While initializing this field, the AccessControlException is thrown.
I can't figure out what is wrong,
So I tried to sign the plug-in, but the problem stands still.
PS. I have made my own ClassLoader,
and this platform works well without JWS.
Please help me, thanks.
Below is the error message:
Java Web Start 1.4.2 主控台,已啟動 Fri Jul 02 01:31:17 CST 2004
Java 2 Runtime Environment:版本 1.4.2,作者:Sun Microsystems Inc.
/*my own log message*/
2004/7/2 上午 01:31:23 pluginmanager.Activater activate /*this is my own classloader*/
配置: activate jar=\Plugins\Common.jar /*load plug-in Common.jar*/
2004/7/2 上午 01:31:23 pluginmanager.Activater activate
細緻: collect resources /*collect other jar files needed by Common.jar*/
2004/7/2 上午 01:31:23 pluginmanager.Activater activate
細緻: load plugin=\Plugins\Common.jar
2004/7/2 上午 01:31:23 pluginmanager.Activater activate
細緻: activating class name=filemanager.FileManager /*instantiate plug-in component*/
java.security.AccessControlException: access denied (java.util.PropertyPermission user.dir read)
     at java.security.AccessControlContext.checkPermission(Unknown Source)
     at java.security.AccessController.checkPermission(Unknown Source)
     at java.lang.SecurityManager.checkPermission(Unknown Source)
     at java.lang.SecurityManager.checkPropertyAccess(Unknown Source)
     at java.lang.System.getProperty(Unknown Source)
     at java.io.Win32FileSystem.getUserPath(Unknown Source)
     ... /*cut*/
     at javax.swing.JFileChooser.<init>(Unknown Source)
     at filemanager.Open.<init>(Open.java:20)
     at filemanager.FileManager.<init>(FileManager.java:38)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     ... /*cut*/
     at java.lang.Class.newInstance(Unknown Source)
     at pluginmanager.Activater.activate(Activater.java:120)
     at pluginmanager.PluginManager$ActivateAction.actionPerformed(PluginManager.java:53)

When running under Java Web Start, a security manager is installed.
Since you have created your own classloader, you are responsible for assigning permissions to the classes you load.
You can change you class loader to extend SecureClassLoader, then override getPermissions:
protected PermissionCollection getPermissions(CodeSource codesource) {
PermissionCollection perms = super.getPermissions(codesource);
/* add whatever permissions you want your code to hance*/
perms.add( ... );
/* or just add all-permissions */
perms.add(new AllPermission());
or - you can just remove the Security Manager:
System.setSecurityManager(null);
/Dietz

WUSA error 5 0x80070005 Access Denied while installing KB2992611 & KB3003743 on Win 7

I'm having a well known problem while patching Windows 7 SP1 x86 systems, but none of the common fixes have worked. I'll use KB2992611 for examples throughout, but the exact same behavior is being seen with KB3003743.
Logged in as an admin and running an elevated command prompt, I try to install the patch as follows:
wusa.exe C:\Temp\Windows6.1-KB2992611-x86.msu /quiet /norestart
The event log shows a 0x80070005, Access Denied from WindowsUpdateClient, but nothing else interesting. If I remove the
/quiet switch or just double-click the .msu, the graphical installer gets through the "Initializing" phase, but then says "The following updates were not installed:" and lists the patch.
The CBS log (C:\Windows\Logs\CBS\CBS.log) suggests permission issues with stuff under C:\windows\SoftwareDistribution...
Info DPX Started DPX phase: Apply Deltas Provided In File
Info DPX MoveFileExW failed, source: \\?\C:\windows\SoftwareDistribution\Download\fa848827d1bd908340ba44c76a28e7e8\inst\$dpx$.tmp\f3e1d3177d3c4d4597f9494ac7b982ea.tmp, destination: \\?\C:\windows\SoftwareDistribution\Download\fa848827d1bd908340ba44c76a28e7e8\inst\x86_microsoft-windows-lsa_31bf3856ad364e35_6.1.7601.18606_none_a85eb04bbb037ec6\lsass.exe, hr 0x80070005
Info DPX DpxMoveFileExW failed, source: \\?\C:\windows\SoftwareDistribution\Download\fa848827d1bd908340ba44c76a28e7e8\inst\$dpx$.tmp\f3e1d3177d3c4d4597f9494ac7b982ea.tmp, destination: \\?\C:\windows\SoftwareDistribution\Download\fa848827d1bd908340ba44c76a28e7e8\inst\x86_microsoft-windows-lsa_31bf3856ad364e35_6.1.7601.18606_none_a85eb04bbb037ec6\lsass.exe, hr 0x80070005
Info DPX MoveFileExW failed, source: \\?\C:\windows\SoftwareDistribution\Download\fa848827d1bd908340ba44c76a28e7e8\inst\$dpx$.tmp\847db368c3d8b44092e372d302e831d8.tmp, destination: \\?\C:\windows\SoftwareDistribution\Download\fa848827d1bd908340ba44c76a28e7e8\inst\x86_microsoft-windows-lsa_31bf3856ad364e35_6.1.7601.22814_none_a8db7e7cd42b04fa\lsass.exe, hr 0x80070005
Info DPX DpxMoveFileExW failed, source: \\?\C:\windows\SoftwareDistribution\Download\fa848827d1bd908340ba44c76a28e7e8\inst\$dpx$.tmp\847db368c3d8b44092e372d302e831d8.tmp, destination: \\?\C:\windows\SoftwareDistribution\Download\fa848827d1bd908340ba44c76a28e7e8\inst\x86_microsoft-windows-lsa_31bf3856ad364e35_6.1.7601.22814_none_a8db7e7cd42b04fa\lsass.exe, hr 0x80070005
Info DPX File could not be expanded, Source=x86_microsoft-windows-lsa_31bf3856ad364e35_6.1.7601.18606_none_a85eb04bbb037ec6\lsass.exe, Target=(null), status=0x80070005
Info DPX ProvideRequestedDataByFile failed, Response file Name: \\?\C:\windows\SoftwareDistribution\Download\fa848827d1bd908340ba44c76a28e7e8\Windows6.1-KB2992611-x86.cab
Info DPX Ended DPX phase: Apply Deltas Provided In File
(timestamps removed for readability)
...but other .msu files install without issue. I browse to C:\windows\SoftwareDistribution\Download\{string} and see that the Windows6.1-KB2992611-x86.cab file has been copied there.
The Windows Update log (C:\Windows\WindowsUpdate.log) has similarly unhelpful messages referencing error 80070005.
Intelligently interpreting procmon output may be above my pay grade, but the only ACCESS DENIED event that I see from TrustedInstaller.exe is while attempting a
SetRenameInformationFile on C:\windows\SoftwareDistribution\Download\{string}
I have tried the fix that involves using the subinacl utility to make sure that Administrators and SYSTEM have proper permissions in the registry (e.g., see support.microsoft.com/kb968003). I have also tried the fix that Kim proposes at the link below,
using subinacl to make sure that NT SERVICE\TRUSTEDINSTALLER has permissions where it needs...
answers.Microsoft.com/en-us/windows/forum/windows_7-windows_update/windows-update-error-0x80070005-need-a-fix-click/e4cb8700-f215-4f1a-8bd4-6457ac619c19. I get the same errors after running their scripts as directed.
I am having this issue on multiple (near-) identically configured hardware from Dell & Fujitsu, so it is not just one flakey device. The systems are locked down via local GPO and run custom applications, so there is a chance that something wonky and
specific to my environment is causing this, but I'm out of things to check and try, so any ideas would be appreciated. Additional info available upon request.
Thanks

Hi,
I recommend you to follow these steps to have a fix.
1.Rename the SoftwareDistribution folder.
     Open an administrative Command Prompt window.
     Run the following commands, and press Enter after each command:
     Net stop wuauserv
     cd %systemroot%
     Ren SoftwareDistribution SoftwareDistribution.old
     Net start wuauserv
     Try to install updates again.
2.Run this Troubleshoot tool to have a check.
To run the tool:
Control Panel\All Control Panel Items\Troubleshooting\System and Security\Windows Update
3.When you are installing the update, please log in the machine as an administrator. Meanwhile please turn off the antivirus software temporarily to install the update.
Best regards

Access Denied while converting lead

For Sales & Mktg role done all the necessary settings in access profile ,Role & previleges still it gives an access denied message while converting the lead to opportunity
Getting the message
SBL-DAT--00542
Please guide

Make sure the record type access settings for the user role must
have the Has Access and Can Create check boxes selected for the Account, Opportunity, Lead, and Contact
record types. However, the correct settings are as follows:
• The Has Access check box must be selected for the Lead record type in all cases of lead conversion.
• The Has Access and Can Create check boxes must be selected for the Activity record type in all cases of
lead conversion.
• To convert a lead using an existing account, the Has Access check box must be selected for the Account
record type.
• To convert a lead to a new account, the Has Access and Can Create check boxes must be selected for the
Account record type.
• To convert a lead using an existing contact, the Has Access check box must be selected for the Contact
record type.
• To convert a lead to a new contact, the Has Access and Can Create check boxes must be selected for the
Contact record type.
• To convert a lead to an opportunity, the Has Access and Can Create check boxes must be selected for the
Opportunity record type.
After checking this and you still get the error then contact CRM On Demand customer care.

Access denied while manually removing reader 8.x

While following the instructions for manually removing Adobe Reader 8.x as posted here:
http://kb2.adobe.com/cps/400/kb400769.html
when I try to delete AcroIEHelper.dll, AcroPDF.dll, and pdfshell.dll as per the instructions, I get "Access denied".
I am running XP SP3, logged on under administrator, running in diagnostic mode, and explorer.exe has been terminated. I have also tried deleting these in safe mode under the same conditions.
I'm not sure what has these locked. Any suggestions as to what I should try?
Thanks.

Mike,
Thank you for responding! I tried running that on a testbed/sandbox machine to test it out before using this fix on a live machine, and it resulted in me NOT being able to reinstall any Adobe Reader, any version, at all. When I tried to reinstall 8.1.x or 9.x, the download manager just reported that it was "unable to install" with not much else to go on.
It also left the Adobe Reader add-on installed in Firefox, and there was no way to uninstall it.
I'd love to try using the MS Installer Clean-up tool if I could understand exactly how I should proceed with it - exactly what steps I need to take.
Can you help me here? Again, I appreciate your response and look forward to getting this problem behind me!
Thanks!

Getting error-"Process Access denied" while invoking Process as web service

Hi,
I have a very simple Business Process, just to take some input & give some String as output. I published this BP as web service on Oracle BPM - Process Administrator. I got its WSDL also. I can invoke startSession operation. But when I invoke the operation that is exposed by BP as web service, I am getting an error - "Process Access denied".
Please help to solve the issue, as I need it urgently.
Thanks,
Sujata

Hi Ariel,
Thanks for reply and sorry for delay on updating status. Actually our process server was having a problem, so I could not check the same in last 4 days. Now coming to the point....
I changed Process web service by changing authentication type as "Usernname token profile". I have not checked "Required HTTP Basic Authentication". As you said, WSDL got changed, it has removed startSession(). But when I invoke my actual operation, I am supposed to send authentication data (user name & password) in header.
I tried to send correct authentication info in header. But still I am getting an exception.
soapenv:Server.generalException - WSDoAllReceiver: Request does not contain required Security header
I feel header might be going wrong. I have taken header format from web service guide. I am attaching the entire request message taht I am sending, please tell me where I am going wrong...
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:sim="http://bea.com/albpm/Sample/SimpProc">
<soapenv:Header>
<wsse:Security soapenv:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wsswssecurity-secext-1.0.xsd">
<wsu:Timestamp xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<wsu:Created> 2010-06-01T19:23:29.774Z </wsu:Created>
<wsu:Expires> 2010-07-02T15:02:29.774Z </wsu:Expires>
</wsu:Timestamp>
<wsse:UsernameToken>
<wsse:Username>bpr_user</wsse:Username>
<wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wssusername-token-profile-1.0#PasswordText">bpruser12</wsse:Password>
</wsse:UsernameToken>
</wsse:Security>
</soapenv:Header>
<soapenv:Body>
<sim:sayHello>
<argInput>ss</argInput>
</sim:sayHello>
</soapenv:Body>
</soapenv:Envelope>
I cehcked with & without wsu:Timestamp. But same.....
Please give your suggestion.
Thanks
Sujata

Error: Access Denied while opening the Sharepoint 2010 site.

Dear All,
When I am trying to open the site I am getting followinh error,
Error:
Error: Access Denied
Current User
You are currently signed in as: DomainName\Administrator
Sign in as a different user
Go
back to site
Can anybody please tell me how ro resolve this isse ?
Thanks and Regard's
Harish Patil

Hi,
Run the PowerShell cmdlet to list and check the users permisssion on SharePoint site. You may refer to the articles below.
Get Users Permissions List on SharePoint Webs – PowerShell Script
http://mkdot.net/mknetug/mk_sp/b/darko/archive/2010/10/01/get-users-permissions-list-on-sharepoint-webs-powershell-script.aspx
How to Check Effective Permissions of a User in Each Site in a Site Collection in Sharepoint 2007 and Sharepoint 2010 using Powershell
http://rahulrashu.blogspot.com/2011/12/how-to-check-effective-permissions-of_11.html
Hope that helps.
Ivan-Liu
TechNet Community Support

Access Denied while trying to delete document

In SharePoint 2013, if the user ONLY has contribute access to a library, (user does not have access to the site) and if the user tries to delete a file, it throws an error message.
Access Denied: You do not have permission to perform this action or access this resource.
permission inheritance is broken on library level, Contribute Permission does have these options checked delete files, versions, and view application pages, but can not delete file.
If read access is provided to the site level, then user can delete file, why is that ?
using SharePoint 2013 Standard Edition.

Does the user get the error both from the ribbon and from the "...", "..." menu?
If a user has the Delete Items permission, but not the Use Remote Interfaces permission then they can delete files from the ribbon, but when attempting to delete from the content dropdown (Edit Control Block) will get Access Denied.
I'd like to try to duplicate your problem...
Is versioning enabled? Major or major and minor versions?
Is this consistent with all document types? .txt, pdf, docx, etc.
Is the file in a Document Set?
Is there a workflow running on the documents?
Is the document assigned to a custom Content Type?
Any other settings?
Mike Smith TechTrainingNotes.blogspot.com
Books:
SharePoint 2007 2010 Customization for the Site Owner,
SharePoint 2010 Security for the Site Owner

Integrating BI reports into portals

Hi All,
      I have a requirement to integrate BI reports into portals. But i dont have any idea regarding this. I dont whether I am posting this thread in a correct forum. If not please correct me.
Can anyone suggest what are the basic steps?
Regards,
Subashini.

Create a BI System in the Portal Create a BI System in the Portal:
The BI system must be set up in the portal so that content from BI can be displayed there. The system is entered in the Portal System Landscape Directory.
Procedure
1. Log on to the portal.
        2. Start the iView System Administration ® System Configuration ® System Landscape.
        3. In the context menu of the System Landscape folder in the portal catalog, choose New ® System.
        4. Choose SAP System with Dedicated Application Server for SAP System as the template.
        5. Now set the properties of WAS ,ITS,CONNECTOR and USER MAPPING:
Input Field Details
System Name     Type     Properties
Business Intelligence SAP system with dedicated application server.
ITS
ITS description
Host name
Path
Protocal
WAS Description
Host name
Path
Protocal
CONNECTOR
Application Host
Remote Host Type
SAP Client
SAP System ID(SID)
SAP System Number
User Mapping
Authentication Ticket Type
Logon Method
User Mapping Type
6. After setting the above specified properties ,then one has to check the connections which can be set using
test connections.
If the connection tests fails and says that system aliases needs to be defined, go for the display properties
of the system to add u201Asystem aliasu2018.
Finally test for he connections which needs to be in green i.e. system is configured from Portal to BI.
Rest all the information about how to integrate BW with portal i gave you in the previous reply also after configuring System You need to create ivew workset and role covered in previous mail.
Please reward with points.
regards
Pooja

Access Denied while integrating WD appl into Portal

Similar Messages

Maybe you are looking for