Access Denied while starting server   in SAPMMC

Hi All,
I have installed SAP ECC 5.0 sucessfully on my system and i am able to start and stop the server.
But after installing the SAP GUI i am unable to start and stop the server.it is giving Access Denied start falied 80070005 message.
Even if i give the start\stop instance permissions to all the users it is not accepting.
Kindly help me to resolve the problem.
Regards,
HymaRao

Hello,
Have you tried searching this up on SDN Forums ?
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=80070005&cat=sdn_all
You will get the following results
SAP Note 1010540 DCOM Interface Configuration for Remote Access
SAP Note 142100 Windows: Problems with new SAP service as of Rel. 4.5B
Hope that helps.
Regards,
Siddhesh

Similar Messages

  • OIM 11g - Exception while starting server 'oim_server1'

    Hi all,
    We are trying to install the OIM 11g and having issues starting the OIM server (SOA and OAM server is alos not starting up) in the weblogic enterprise console.
    The error message we are getting is "Exception while starting server 'oim_server1'" ?
    Thanks

    I tried starting from command prompt and with nodemanager, but none of the options seems to work.
    I get the following error log:
    ####<16.nov.2010 kl 00.52 CET> <Info> <Security> <WIN-FQRM761U74N> <oim_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1289865176201> <BEA-090511> <The following exception has occurred:
    com.bea.common.engine.ServiceInitializationException: com.bea.common.engine.SecurityServiceRuntimeException: [Security:097533]SecurityProvider service class name for OIMAuthenticationProvider is not specified.
         at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:365)
         at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:315)
         at com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:257)
         at com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:72)
         at weblogic.security.service.internal.WLSIdentityServiceImpl.initialize(WLSIdentityServiceImpl.java:47)
         at weblogic.security.service.CSSWLSDelegateImpl.initializeServiceEngine(CSSWLSDelegateImpl.java:300)
         at weblogic.security.service.CSSWLSDelegateImpl.initialize(CSSWLSDelegateImpl.java:221)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.InitializeServiceEngine(CommonSecurityServiceManagerDelegateImpl.java:1783)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:442)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:840)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(CommonSecurityServiceManagerDelegateImpl.java:869)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1028)
         at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
         at weblogic.security.SecurityService.start(SecurityService.java:141)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused By: com.bea.common.engine.SecurityServiceRuntimeException: [Security:097533]SecurityProvider service class name for OIMAuthenticationProvider is not specified.
         at com.bea.common.security.internal.legacy.service.SecurityProviderImpl.init(SecurityProviderImpl.java:47)
         at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:363)
         at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:315)
         at com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:257)
         at com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:72)
         at weblogic.security.service.internal.WLSIdentityServiceImpl.initialize(WLSIdentityServiceImpl.java:47)
         at weblogic.security.service.CSSWLSDelegateImpl.initializeServiceEngine(CSSWLSDelegateImpl.java:300)
         at weblogic.security.service.CSSWLSDelegateImpl.initialize(CSSWLSDelegateImpl.java:221)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.InitializeServiceEngine(CommonSecurityServiceManagerDelegateImpl.java:1783)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:442)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:840)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(CommonSecurityServiceManagerDelegateImpl.java:869)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1028)
         at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
         at weblogic.security.SecurityService.start(SecurityService.java:141)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    >
    ####<16.nov.2010 kl 00.52 CET> <Error> <Security> <WIN-FQRM761U74N> <oim_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1289865176206> <BEA-090870> <The realm "myrealm" failed to be loaded: weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: com.bea.common.engine.SecurityServiceRuntimeException: [Security:097533]SecurityProvider service class name for OIMAuthenticationProvider is not specified..
    weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: com.bea.common.engine.SecurityServiceRuntimeException: [Security:097533]SecurityProvider service class name for OIMAuthenticationProvider is not specified.
         at weblogic.security.service.CSSWLSDelegateImpl.initializeServiceEngine(CSSWLSDelegateImpl.java:342)
         at weblogic.security.service.CSSWLSDelegateImpl.initialize(CSSWLSDelegateImpl.java:221)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.InitializeServiceEngine(CommonSecurityServiceManagerDelegateImpl.java:1783)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:442)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:840)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(CommonSecurityServiceManagerDelegateImpl.java:869)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1028)
         at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
         at weblogic.security.SecurityService.start(SecurityService.java:141)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused By: com.bea.common.engine.ServiceInitializationException: com.bea.common.engine.SecurityServiceRuntimeException: [Security:097533]SecurityProvider service class name for OIMAuthenticationProvider is not specified.
         at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:365)
         at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:315)
         at com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:257)
         at com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:72)
         at weblogic.security.service.internal.WLSIdentityServiceImpl.initialize(WLSIdentityServiceImpl.java:47)
         at weblogic.security.service.CSSWLSDelegateImpl.initializeServiceEngine(CSSWLSDelegateImpl.java:300)
         at weblogic.security.service.CSSWLSDelegateImpl.initialize(CSSWLSDelegateImpl.java:221)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.InitializeServiceEngine(CommonSecurityServiceManagerDelegateImpl.java:1783)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:442)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:840)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(CommonSecurityServiceManagerDelegateImpl.java:869)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1028)
         at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
         at weblogic.security.SecurityService.start(SecurityService.java:141)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused By: com.bea.common.engine.SecurityServiceRuntimeException: [Security:097533]SecurityProvider service class name for OIMAuthenticationProvider is not specified.
         at com.bea.common.security.internal.legacy.service.SecurityProviderImpl.init(SecurityProviderImpl.java:47)
         at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:363)
         at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:315)
         at com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:257)
         at com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:72)
         at weblogic.security.service.internal.WLSIdentityServiceImpl.initialize(WLSIdentityServiceImpl.java:47)
         at weblogic.security.service.CSSWLSDelegateImpl.initializeServiceEngine(CSSWLSDelegateImpl.java:300)
         at weblogic.security.service.CSSWLSDelegateImpl.initialize(CSSWLSDelegateImpl.java:221)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.InitializeServiceEngine(CommonSecurityServiceManagerDelegateImpl.java:1783)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:442)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:840)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(CommonSecurityServiceManagerDelegateImpl.java:869)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1028)
         at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
         at weblogic.security.SecurityService.start(SecurityService.java:141)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    >
    ####<16.nov.2010 kl 00.52 CET> <Notice> <Security> <WIN-FQRM761U74N> <oim_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1289865176207> <BEA-090082> <Security initializing using security realm myrealm.>
    ####<16.nov.2010 kl 00.52 CET> <Critical> <WebLogicServer> <WIN-FQRM761U74N> <oim_server1> <main> <<WLS Kernel>> <> <> <1289865176210> <BEA-000362> <Server failed. Reason:
    There are 1 nested errors:
    weblogic.security.service.SecurityServiceRuntimeException: [Security:090399]Security Services Unavailable
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:916)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
         at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
         at weblogic.security.SecurityService.start(SecurityService.java:141)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

  • Exception while starting server P6 (EPPM 8.3.2) on Weblogic Server 11gR1

    I am a single user for learning purpose. I am trying to install EPPM 8.3.2 on my lenovo Window 7, 32 Bit Laptop.
    - I have installed weblogic server,
    - Installed databse and
    - EPPM 8.3.2.
    Unfortunately I am getting error "Exception while starting server P6     ". I have not applied the patch 16176831 on Weblogic server as unable to download in (I don't have a support Identifier and I don't intend to buy also) can some body guide me if the exception is because of not applying the patch or for some other reason.
    if because of Applying the patch 16176831 then where can I can free download it. (Since I am not making money right now I don't wan't to spend it either)
    Thanks in anticipation.
    Vikram S Gupta

    Hello,
    first of all your Problem on your 32-bit Laptop is that you cannot use 2GB of Memory for one managed Server (process). The P6 managed Server has set the Parameter to 2GB. So if you only have a total Memory of 2GB available then this won't be sufficent I fear. So first check your Oracle DB Setting how much Memory is used there. The next step is depending how you start your P6. Do you use the startPrimavera,bat? I mention not.
    So go to your <drive>:\Middleware\user_projects\domains\P6EPPM\bin and run there the startWebLogic.cmd (maybe you're asked for the user to start. So use the weblogic user for Startup). Then open a browser and open the  page http://localhost:7001/console (Standard if you haven't changed it through the install). Login with your weblogic user. On the left side click on Environment, then Server and click then on P6. In the Details page click on the Tab "Start up" and edit under arguments the following line:
    -Dprimavera.bootstrap.home=G:/Oracle/P6EPPM/p6/../p6 -Djavax.xml.stream.XMLInputFactory=weblogic.xml.stax.XMLStreamInputFactory -XX:MaxPermSize=512m -Xms512m -Xmx1024m
    You can try to reduce it to -XX:MaxPermSize=256m -Xms256m -Xmx512m
    Maybe you Need first to use the Change Center on the top left side.
    After that go to Environment => Servers, Change Tab to Control. Set the Hug in front of P6 and click on start. If the Memory is sufficent then this will start.
    A better way would be to increase the Memory on your Laptop.
    Regards
    Daniel

  • Exception while starting server EMGC_OMS1 (upgraded to 12.1.0.2)

    Hi,
    I just upgraded my test environment from EM 12c R1 to R2.
    Whole environment runs on Windows: Admin server and monitored targets.
    After following the installation steps in the migration guide, Weblogic console starts nicely (using %DOMAIN_HOME%\startWebLogic.cmd), but I having trouble to start Enterprise Manager Cloud Control web console/server.
    After trying to start EMGC_OMS1 managed server in WebLogic's console, I get the following:
    - EMGC_OMS1 state goes to FAILED_NOT_RESTARTABLE.
    - Admin Server's log show the following errors:
    2012-Sep-28 14:33:05EMReposLoginModuleImpl: throwing LoginException: Authentication Failed: User . Password not supplied
    <Sep 28, 2012 2:33:05 PM CEST> <Warning> <DeploymentService> <BEA-290014> <Invalid user name or password.>
    2012-Sep-28 14:33:07EMReposLoginModuleImpl: throwing LoginException: Authentication Failed: User . Password not supplied
    <Sep 28, 2012 2:33:07 PM CEST> <Error> <Configuration Management> <BEA-150035> <An attempt was made to download the configuration for >the server EMGC_OMS1 by the user with an invalid password.>
    <Sep 28, 2012 2:33:13 PM CEST> <Error> <NodeManager> <BEA-300048> <Unable to start the server EMGC_OMS1 : Exception while starting server >'EMGC_OMS1'>I tried the following:
    - Write again boot.properties file in %DOMAIN_HOME%\servers\EMGC_ADMINSERVER\security and %DOMAIN_HOME%\servers\EMGC_OMS1\security with the credentials for the Weblogic's admin user.
    - Set username and password on "Settings for EMGC_OMS1">Configuration > Server start tab within Weblogic console.
    None of these were successful.
    I also compared the old (R1) installation folder with the new one for the R2, but I cannot see any relevant difference.
    Do you have any suggestion on what else can be wrong?
    Thanks on advance,
    Angel

    Hi Angel,
    Please see the following doc for instructions on starting an OMS.
    http://docs.oracle.com/cd/E24628_01/doc.121/e24473/emctl.htm#BABFEEAJ
    Regards,
    - Loc

  • Access denied while opening any PDF the second time / Zugriff verweigert beim zweiten Öffnen eines beliebigen PDF

    Reader produces "Access denied" while opening any PDF the second time. A LogOut/LogIn or restart is necessary to open a PDF again successfully. User works with a PC (Win7). The file is located on the desktop in a Windows 2008/2012 AD, user profile on networkshare. The same procedure with a file located on any other networkshare or locally on harddisk works without error. Analysis with processmonitor indicates that the file seems to load and then is cancelled for some unknown reason. The problem is somehow growing, beginning with 1 PC and exists now also in our Citrix environment (2 users). Access rights seem to ok and the same on all tested shares (full Access or Change rights).
    Der Reader bringt den Fehler "Zugriff verweigert", wenn man das zweite mal ein PDF öffnen will. Dabei ist der Fehler völlig unabhängig davon, ob man das gleiche oder ein anderes PDF öffnen will. Um wieder erfolgreich ein PDF zu öffnen, ist ein Ab- und Anmelden bzw. ein Neustart des PCs (Win7) nötig. Umgebung ist eine Windows 2008/2012 AD, Profil liegt im Netz. Der Fehler tritt nur bei PDFs auf, die auf dem User-Desktop liegen. Sind die Dateien irgendwo anders im Netz oder lokal auf der Festplatte, kommt der Fehler nicht. Eine Analyse mit dem Prozessmonitor zeigt, dass das Laden des PDFs irgendwann gecancelt wird, warum auch immer. Das Problem scheint sich auch langsam auszuweiten. Es hat mit einem PC begonnen und tritt nun auch in unserer Citrix Umgebung bei bis jetzt 2 Usern auf. Die Berechtigungen scheinen überall ok und gleich zu sein (Volluzgriff oder Ändern).

    ls -l /var/run/lighttpd/
    And how are you spawning the php instances? I don't see that in the daemons array anywhere.
    EDIT: It looks like the info in that page is no longer using pre-spawned instances, but lighttpd adaptive-spawn. The documentation has been made inconsistent it looks like.
    You will note that with pre-spawned information, the config looks different[1].
    You need to do one or the other, not both (eg. choose adaptive-spawn, or pre-spawn..not both).
    [1]: http://wiki.archlinux.org/index.php?tit … oldid=8051 "change"

  • Error while starting server

    Hi All,
    we are getting below error while starting Admin Server.
    we have tried resetting boot.properties file and deleting ldap files, clearing caceh, tmp files but no luck.
    Please let us know if anyone has any solution:
    ####<Mar 19, 2012 10:15:37 AM CDT> <Info> <WebLogicServer> <abcd.oracle.com> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1332170137206> <BEA-000000> <WebLogic Server "AdminServer" version:
    WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 Copyright (c) 1995, 2009, Oracle and/or its affiliates. All rights reserved.>
    ####<Mar 19, 2012 10:15:37 AM CDT> <Notice> <Log Management> <abcd.oracle.com> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1332170137316> <BEA-170019> <The server log file /abcd/admin/soa_domain/aserver/soa_domain/servers/AdminServer/logs/AdminServer.log is opened. All server side log events will be written to this file.>
    ####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Log Management> <abcd.oracle.com> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1332170137324> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.>
    ####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Diagnostics> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137384> <BEA-320001> <The ServerDebug service initialized successfully.>
    ####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Server> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137448> <BEA-002622> <The protocol "t3" is now configured.>
    ####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Server> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137448> <BEA-002622> <The protocol "t3s" is now configured.>
    ####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Server> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137448> <BEA-002622> <The protocol "http" is now configured.>
    ####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Server> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137448> <BEA-002622> <The protocol "https" is now configured.>
    ####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Server> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137449> <BEA-002622> <The protocol "iiop" is now configured.>
    ####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Server> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137449> <BEA-002622> <The protocol "iiops" is now configured.>
    ####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Server> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137450> <BEA-002622> <The protocol "ldap" is now configured.>
    ####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Server> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137450> <BEA-002622> <The protocol "ldaps" is now configured.>
    ####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Server> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137451> <BEA-002622> <The protocol "cluster" is now configured.>
    ####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Server> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137452> <BEA-002622> <The protocol "clusters" is now configured.>
    ####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Server> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137455> <BEA-002622> <The protocol "snmp" is now configured.>
    ####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Server> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137455> <BEA-002622> <The protocol "admin" is now configured.>
    ####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Server> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137456> <BEA-002624> <The administration protocol is "t3s" and is now configured.>
    ####<Mar 19, 2012 10:15:37 AM CDT> <Info> <RJVM> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137472> <BEA-000570> <Network Configuration for Channel "AdminServer"
    Listen Address          199.25.245.5:49701
    Public Address          N/A
    Http Enabled          true
    Tunneling Enabled     false
    Outbound Enabled     false
    Admin Traffic Enabled     true>
    ####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Server> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137524> <BEA-002609> <Channel Service initialized.>
    ####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Socket> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137594> <BEA-000436> <Allocating 4 reader threads.>
    ####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Socket> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137596> <BEA-000446> <Native IO Enabled.>
    ####<Mar 19, 2012 10:15:37 AM CDT> <Info> <IIOP> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137754> <BEA-002014> <IIOP subsystem enabled.>
    ####<Mar 19, 2012 10:15:38 AM CDT> <Info> <Security> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170138772> <BEA-000000> <Starting OpenJPA 1.1.1-SNAPSHOT>
    ####<Mar 19, 2012 10:15:38 AM CDT> <Info> <Security> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170138892> <BEA-000000> <StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_mN86Z6ErrPlX8QgPm9/flN0P8GA=>
    ####<Mar 19, 2012 10:15:38 AM CDT> <Info> <Security> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170138965> <BEA-090516> <The Authenticator provider has preexisting LDAP data.>
    ####<Mar 19, 2012 10:15:39 AM CDT> <Info> <Security> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170139186> <BEA-090516> <The Authorizer provider has preexisting LDAP data.>
    ####<Mar 19, 2012 10:15:39 AM CDT> <Info> <Security> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170139671> <BEA-090516> <The CredentialMapper provider has preexisting LDAP data.>
    ####<Mar 19, 2012 10:15:39 AM CDT> <Info> <Security> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170139682> <BEA-090516> <The RoleMapper provider has preexisting LDAP data.>
    ####<Mar 19, 2012 10:15:39 AM CDT> <Info> <Security> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170139847> <BEA-090093> <No pre-WLS 8.1 Keystore providers are configured for server AdminServer for security realm myrealm.>
    ####<Mar 19, 2012 10:15:39 AM CDT> <Notice> <Security> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170139848> <BEA-090082> <Security initializing using security realm myrealm.>
    ####<Mar 19, 2012 10:15:39 AM CDT> <Critical> <Security> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170139972> <BEA-090402> <Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.>
    ####<Mar 19, 2012 10:15:39 AM CDT> <Critical> <WebLogicServer> <abcd.oracle.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1332170139974> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
    weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:959)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
         at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
         at weblogic.security.SecurityService.start(SecurityService.java:141)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    Caused By: javax.security.auth.login.FailedLoginException: [Security:090304]Authentication Failed: User ohsadmin javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User ohsadmin denied
         at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:261)
         at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
         at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at javax.security.auth.login.LoginContext.invoke(LoginContext.java:769)
         at javax.security.auth.login.LoginContext.access$000(LoginContext.java:186)
         at javax.security.auth.login.LoginContext$4.run(LoginContext.java:683)
         at javax.security.auth.login.LoginContext.invokePriv(LoginContext.java:680)
         at javax.security.auth.login.LoginContext.login(LoginContext.java:579)
         at com.bea.common.security.internal.service.JAASLoginServiceImpl.login(JAASLoginServiceImpl.java:113)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:57)
         at $Proxy22.login(Unknown Source)
         at weblogic.security.service.internal.WLSJAASLoginServiceImpl$ServiceImpl.login(WLSJAASLoginServiceImpl.java:89)
         at com.bea.common.security.internal.service.JAASAuthenticationServiceImpl.authenticate(JAASAuthenticationServiceImpl.java:82)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:57)
         at $Proxy40.authenticate(Unknown Source)
         at weblogic.security.service.WLSJAASAuthenticationServiceWrapper.authenticate(WLSJAASAuthenticationServiceWrapper.java:40)
         at weblogic.security.service.PrincipalAuthenticator.authenticate(PrincipalAuthenticator.java:348)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:929)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
         at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
         at weblogic.security.SecurityService.start(SecurityService.java:141)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    >
    ####<Mar 19, 2012 10:15:40 AM CDT> <Notice> <WebLogicServer> <abcd.oracle.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1332170140016> <BEA-000365> <Server state changed to FAILED>
    ####<Mar 19, 2012 10:15:40 AM CDT> <Error> <WebLogicServer> <abcd.oracle.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1332170140016> <BEA-000383> <A critical service failed. The server will shut itself down>
    ####<Mar 19, 2012 10:15:40 AM CDT> <Notice> <WebLogicServer> <abcd.oracle.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1332170140019> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
    ####<Mar 19, 2012 10:15:40 AM CDT> <Info> <WebLogicServer> <abcd.oracle.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1332170140035> <BEA-000236> <Stopping execute threads.>

    This line in the error list may point you towards solution :
    +<1332170139972> <BEA-090402> <Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.>+
    I reckon the boot.properties is not correct. You can recreate the file - adding the new credentials. Check the OBE [url http://st-curriculum.oracle.com/obe/fmw/wls/10g/r3/installconfig/enable_auto_login/boot_identity_file.htm]Enabling Auto Login by Using the Boot Identity File for more information.
    Thanks,
    EJ

  • Error (access denied) when starting Client Runtime Audit Browser

    LS,
    After starting the OC4J instance, I try to start the Client Runtime Audit Browser. For a brief moment I see a DOS-box, then an IE-page appears saying the following:
    ======================================================
    ERROR
    The requested URL could not be retrieved
    While trying to retrieve the URL: http://127.0.0.1:8999/owbb/RABLogin.uix
    The following error was encountered:
    Access Denied.
    Access control configuration prevents your request from being allowed at this time. Please contact your service provider if you feel this is incorrect.
    ======================================================
    Any idea whether this is a local problem?
    I've tried applying the settings as mentioned in the configuration guide, but the Bypass option for the proxy is impossible to set since we do not use a proxy server.
    Your thoughts?
    Regards, Patrick

    Good morning All,
    Maybe I've got the wrong idea of what is all needed to be able to run the RAB locally, but I thought that starting the OC4J instance would be sufficient to get started.
    In the Installation and Configuration Guide the following is mentioned:
    2.7 Step 6. Configure the Web Browser for Design and Runtime Audit Browsers
    2.7.1 Add "LOCALHOST" to Your Web Browser Proxy Server Bypass List
    2.7.2 Configure the Cache Management in Your Web Browser
    2.7.3 Configure Warehouse Builder with a Net Service Name
    As said before:
    @2.7.1, we do not use a proxy (according to Internet Explorer settings) therefore I can't add 'localhost' to the bypass-list, but then again I think that it does not need to be, since there is nothing to be bypassed in the first place.
    2.7.2 has been implemented.
    @2.7.3, I added the net service name manually to TNSNAMES.ORA (since I also needed that to be able to get on to the database using TOAD and SQL*Plus).
    We do not have 9iAS integration for RAB, nor do we have OEM integration.
    Are there other things that need to be implemented? Mentioned so far have been HTTP-server and RTP services, but paragraph 2.7 does not mention anything about this. Maybe there are certain services that need to be running on the server (like HTTP and/or RTP), even though I would like to run the RAB locally?
    Where does one actually need RTP for?
    Thanks in advance.
    Cheers, Patrick

  • Error 406 access denied while trying to Add Windows 2008 HV host in SCVMM 2008.

    I am trying to add Windows 2008 HV host in SCVMM 2008. While adding host i am getting error message...
    Error (406)
    Access
    has been denied while contacting the server <server name>. 
    Recommended
    Action
    1.
    Verify that the specified user account has administrative privileges on <server name>.
    2.
    Verify that DCOM access, launch, and activation permissions are enabled on <server name> for the Administrators group. Use dcomcnfg.exe to modify
    permissions, and then try the operation again.
    I have already done DCOM security modification for my user. I am able to RDP or any file sharing HV host from SCVMM machine. My user is member of local administrator for both the machines. 
    Before that i have added one Windows 2008 HV (Core) successfully and 2 ESX host in same SCVMM machine. 
    Any Help would be greatly appreciated.
    vaibhav

    Has anyone found a fix for this? I've been troubleshooting this issue for 4 days now. I've unjoined/rejoined the host to the domain, deleted SCVMM certificate, given permissions (out the wahzoo) in COM/Access Permissions, all updates installed, firewall
    is off (I even tried turning it on and configuring program/port access), I've tried with 3 different domain accounts that are a member of the local Administrators group.
    The other day I managed to get the host added (don't ask me how) but then all the VM's were in status 'Host not responding' so I couldn't even manage them. So I removed it and now can't get the host added again. I'm using SCVMM 2008 R2 SP1 and the problem
    host is Server 2008 R2 SP1 x64.
    Error (406)
    Access has been denied while contacting the server xxxxxxxx.domain.com.  
    Recommended Action
    1. Verify that the specified user account has administrative privileges on xxxxxxx.domain.com.
    2. Verify that DCOM access, launch, and activation permissions are enabled on xxxxxxx.domain.com for the Administrators group. Use dcomcnfg.exe to modify permissions, and then try the operation again.
    I was getting this error after I got the host added:
    Error (2910)
    VMM does not have appropriate permissions to access the resource C:\Windows\system32\qmgr.dll on the xxxxxxxx.domain.com server.
     (Access is denied (0x80070005))
    Recommended Action
    Ensure that Virtual Machine Manager has the appropriate rights to perform this action.

  • Access denied while loading jar files from client

    I am creating a platform
    that can be started by JWS
    and then load plug-ins from client drive.
    I've signed my platform (packaged as a jar file),
    and set up the security tag in my jnlp,
    so that it can access client files.
    The plug-ins are packaged as jar files.
    And in one of the plug-ins, there is a class that has a JFileChooser field.
    While initializing this field, the AccessControlException is thrown.
    I can't figure out what is wrong,
    So I tried to sign the plug-in, but the problem stands still.
    PS. I have made my own ClassLoader,
    and this platform works well without JWS.
    Please help me, thanks.
    Below is the error message:
    Java Web Start 1.4.2 &#20027;&#25511;&#21488;,&#24050;&#21855;&#21205; Fri Jul 02 01:31:17 CST 2004
    Java 2 Runtime Environment:&#29256;&#26412; 1.4.2,&#20316;&#32773;:Sun Microsystems Inc.
    /*my own log message*/
    2004/7/2 &#19978;&#21320; 01:31:23 pluginmanager.Activater activate /*this is my own classloader*/
    &#37197;&#32622;: activate jar=\Plugins\Common.jar /*load plug-in Common.jar*/
    2004/7/2 &#19978;&#21320; 01:31:23 pluginmanager.Activater activate
    &#32048;&#32251;: collect resources /*collect other jar files needed by Common.jar*/
    2004/7/2 &#19978;&#21320; 01:31:23 pluginmanager.Activater activate
    &#32048;&#32251;: load plugin=\Plugins\Common.jar
    2004/7/2 &#19978;&#21320; 01:31:23 pluginmanager.Activater activate
    &#32048;&#32251;: activating class name=filemanager.FileManager /*instantiate plug-in component*/
    java.security.AccessControlException: access denied (java.util.PropertyPermission user.dir read)
         at java.security.AccessControlContext.checkPermission(Unknown Source)
         at java.security.AccessController.checkPermission(Unknown Source)
         at java.lang.SecurityManager.checkPermission(Unknown Source)
         at java.lang.SecurityManager.checkPropertyAccess(Unknown Source)
         at java.lang.System.getProperty(Unknown Source)
         at java.io.Win32FileSystem.getUserPath(Unknown Source)
         ... /*cut*/
         at javax.swing.JFileChooser.<init>(Unknown Source)
         at filemanager.Open.<init>(Open.java:20)
         at filemanager.FileManager.<init>(FileManager.java:38)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         ... /*cut*/
         at java.lang.Class.newInstance(Unknown Source)
         at pluginmanager.Activater.activate(Activater.java:120)
         at pluginmanager.PluginManager$ActivateAction.actionPerformed(PluginManager.java:53)

    When running under Java Web Start, a security manager is installed.
    Since you have created your own classloader, you are responsible for assigning permissions to the classes you load.
    You can change you class loader to extend SecureClassLoader, then override getPermissions:
    protected PermissionCollection getPermissions(CodeSource codesource) {
    PermissionCollection perms = super.getPermissions(codesource);
    /* add whatever permissions you want your code to hance*/
    perms.add( ... );
    /* or just add all-permissions */
    perms.add(new AllPermission());
    or - you can just remove the Security Manager:
    System.setSecurityManager(null);
    /Dietz

  • WUSA error 5 0x80070005 Access Denied while installing KB2992611 & KB3003743 on Win 7

    I'm having a well known problem while patching Windows 7 SP1 x86 systems, but none of the common fixes have worked. I'll use KB2992611 for examples throughout, but the exact same behavior is being seen with KB3003743.
    Logged in as an admin and running an elevated command prompt, I try to install the patch as follows:
    wusa.exe C:\Temp\Windows6.1-KB2992611-x86.msu /quiet /norestart
    The event log shows a 0x80070005, Access Denied from WindowsUpdateClient, but nothing else interesting. If I remove the
    /quiet switch or just double-click the .msu, the graphical installer gets through the "Initializing" phase, but then says "The following updates were not installed:" and lists the patch.
    The CBS log (C:\Windows\Logs\CBS\CBS.log) suggests permission issues with stuff under C:\windows\SoftwareDistribution...
    Info DPX Started DPX phase: Apply Deltas Provided In File
    Info DPX MoveFileExW failed, source: \\?\C:\windows\SoftwareDistribution\Download\fa848827d1bd908340ba44c76a28e7e8\inst\$dpx$.tmp\f3e1d3177d3c4d4597f9494ac7b982ea.tmp, destination: \\?\C:\windows\SoftwareDistribution\Download\fa848827d1bd908340ba44c76a28e7e8\inst\x86_microsoft-windows-lsa_31bf3856ad364e35_6.1.7601.18606_none_a85eb04bbb037ec6\lsass.exe, hr 0x80070005
    Info DPX DpxMoveFileExW failed, source: \\?\C:\windows\SoftwareDistribution\Download\fa848827d1bd908340ba44c76a28e7e8\inst\$dpx$.tmp\f3e1d3177d3c4d4597f9494ac7b982ea.tmp, destination: \\?\C:\windows\SoftwareDistribution\Download\fa848827d1bd908340ba44c76a28e7e8\inst\x86_microsoft-windows-lsa_31bf3856ad364e35_6.1.7601.18606_none_a85eb04bbb037ec6\lsass.exe, hr 0x80070005
    Info DPX MoveFileExW failed, source: \\?\C:\windows\SoftwareDistribution\Download\fa848827d1bd908340ba44c76a28e7e8\inst\$dpx$.tmp\847db368c3d8b44092e372d302e831d8.tmp, destination: \\?\C:\windows\SoftwareDistribution\Download\fa848827d1bd908340ba44c76a28e7e8\inst\x86_microsoft-windows-lsa_31bf3856ad364e35_6.1.7601.22814_none_a8db7e7cd42b04fa\lsass.exe, hr 0x80070005
    Info DPX DpxMoveFileExW failed, source: \\?\C:\windows\SoftwareDistribution\Download\fa848827d1bd908340ba44c76a28e7e8\inst\$dpx$.tmp\847db368c3d8b44092e372d302e831d8.tmp, destination: \\?\C:\windows\SoftwareDistribution\Download\fa848827d1bd908340ba44c76a28e7e8\inst\x86_microsoft-windows-lsa_31bf3856ad364e35_6.1.7601.22814_none_a8db7e7cd42b04fa\lsass.exe, hr 0x80070005
    Info DPX File could not be expanded, Source=x86_microsoft-windows-lsa_31bf3856ad364e35_6.1.7601.18606_none_a85eb04bbb037ec6\lsass.exe, Target=(null), status=0x80070005
    Info DPX ProvideRequestedDataByFile failed, Response file Name: \\?\C:\windows\SoftwareDistribution\Download\fa848827d1bd908340ba44c76a28e7e8\Windows6.1-KB2992611-x86.cab
    Info DPX Ended DPX phase: Apply Deltas Provided In File
    (timestamps removed for readability)
    ...but other .msu files install without issue. I browse to C:\windows\SoftwareDistribution\Download\{string} and see that the Windows6.1-KB2992611-x86.cab file has been copied there. 
    The Windows Update log (C:\Windows\WindowsUpdate.log) has similarly unhelpful messages referencing error 80070005.
    Intelligently interpreting procmon output may be above my pay grade, but the only ACCESS DENIED event that I see from TrustedInstaller.exe is while attempting a
    SetRenameInformationFile on C:\windows\SoftwareDistribution\Download\{string}
    I have tried the fix that involves using the subinacl utility to make sure that Administrators and SYSTEM have proper permissions in the registry (e.g., see support.microsoft.com/kb968003). I have also tried the fix that Kim proposes at the link below,
    using subinacl to make sure that NT SERVICE\TRUSTEDINSTALLER has permissions where it needs...
    answers.Microsoft.com/en-us/windows/forum/windows_7-windows_update/windows-update-error-0x80070005-need-a-fix-click/e4cb8700-f215-4f1a-8bd4-6457ac619c19. I get the same errors after running their scripts as directed.
    I am having this issue on multiple (near-) identically configured hardware from Dell & Fujitsu, so it is not just one flakey device. The systems are locked down via local GPO and run custom applications, so there is a chance that something wonky and
    specific to my environment is causing this, but I'm out of things to check and try, so any ideas would be appreciated. Additional info available upon request.
    Thanks

    Hi,
    I recommend you to follow these steps to have a fix.
    1.Rename the SoftwareDistribution folder.
         Open an administrative Command Prompt window.
         Run the following commands, and press Enter after each command:
         Net stop wuauserv
         cd %systemroot%
         Ren SoftwareDistribution SoftwareDistribution.old
         Net start wuauserv
         Try to install updates again.
    2.Run this Troubleshoot tool to have a check.
    To run the tool:
    Control Panel\All Control Panel Items\Troubleshooting\System and Security\Windows Update
    3.When you are installing the update, please log in the machine as an administrator. Meanwhile please turn off the antivirus software temporarily to install the update.
    Best regards 

  • Getting error-"Process Access denied" while invoking Process as web service

    Hi,
    I have a very simple Business Process, just to take some input & give some String as output. I published this BP as web service on Oracle BPM - Process Administrator. I got its WSDL also. I can invoke startSession operation. But when I invoke the operation that is exposed by BP as web service, I am getting an error - "Process Access denied".
    Please help to solve the issue, as I need it urgently.
    Thanks,
    Sujata

    Hi Ariel,
    Thanks for reply and sorry for delay on updating status. Actually our process server was having a problem, so I could not check the same in last 4 days. Now coming to the point....
    I changed Process web service by changing authentication type as "Usernname token profile". I have not checked "Required HTTP Basic Authentication". As you said, WSDL got changed, it has removed startSession(). But when I invoke my actual operation, I am supposed to send authentication data (user name & password) in header.
    I tried to send correct authentication info in header. But still I am getting an exception.
    soapenv:Server.generalException - WSDoAllReceiver: Request does not contain required Security header
    I feel header might be going wrong. I have taken header format from web service guide. I am attaching the entire request message taht I am sending, please tell me where I am going wrong...
    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:sim="http://bea.com/albpm/Sample/SimpProc">
    <soapenv:Header>
    <wsse:Security soapenv:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wsswssecurity-secext-1.0.xsd">
    <wsu:Timestamp xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
    <wsu:Created> 2010-06-01T19:23:29.774Z </wsu:Created>
    <wsu:Expires> 2010-07-02T15:02:29.774Z </wsu:Expires>
    </wsu:Timestamp>
    <wsse:UsernameToken>
    <wsse:Username>bpr_user</wsse:Username>
    <wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wssusername-token-profile-1.0#PasswordText">bpruser12</wsse:Password>
    </wsse:UsernameToken>
    </wsse:Security>
    </soapenv:Header>
    <soapenv:Body>
    <sim:sayHello>
    <argInput>ss</argInput>
    </sim:sayHello>
    </soapenv:Body>
    </soapenv:Envelope>
    I cehcked with & without wsu:Timestamp. But same.....
    Please give your suggestion.
    Thanks
    Sujata

  • Error while starting server in UNIX environment

    Hi,
    I am getting the following error while starting servers:
    Oracle BI Presentation Services 10.1.3.4 (Build 080726.1900) are starting up.
    Type: Error
    Severity: 40
    Time: Thu Jun 3 06:41:00 2010
    File: project/webcatalog/localwebcatalog.cpp Line: 761
    Properties: ThreadID-1
    Location:
         saw.catalog.local.readObject
         saw.catalog.local.loadCatalog
         saw.webextensionbase.init
         saw.sawserver
    Error outside of Presentation Catalog occurred.
    Type: Error
    Severity: 40
    Time: Thu Jun 3 06:41:00 2010
    File: project/webcatalog/localwebcatalog.cpp Line: 761
    Properties: ThreadID-1
    Location:
         saw.catalog.local.readObject
         saw.catalog.local.loadCatalog
         saw.webextensionbase.init
         saw.sawserver
    Error outside of Presentation Catalog occurred.
    Type: Error
    Severity: 20
    Time: Thu Jun 3 06:41:00 2010
    File: project/sawserver/main.cpp Line: 338
    Properties: ThreadID-1
    Location:
         saw.sawserver
    Error loading security account .
    Attempted to use an unconstructed lock.
    Current Owner thread id: 0 (0x0)
    Current thread id: 1 (0x1)
    Lock pointer: 0xf2a2efa8
    Lock created in file: server/include/Utility/Generic/SUGRecursiveLock.h
    Lock created on line: 34
    Lock created in function: NQRecursiveLock<NQCriticalSection>::NQRecursiveLock
    Error in file: server/Utility/Generic/NQThreads/SUGCriticalSection.cpp
    Error on line: 242
    Error in function: NQCriticalSection::Acquire
    /orapsdev/BI/setup/sawserver.sh[7]: 786638 IOT/Abort trap(coredump)
    Kindly help to find a solution to it.
    Regards,
    Rahul

    Hi
    I came accrossed this kind of problems before, when I checked the log, I found almost the same error you mentioned and the BI Preenstation services is not started up.
    As my experience, there would be something wrong with the presentation catalog, I changed the catalog to samplesales and it is ok, so I redeploy the specific catalog and then it is ok.
    hope this can help.
    thanks & regards
    henry

  • Access Denied while integrating WD appl into Portal

    Hi all,
    I have created one appl in WD that can access details from R/3. Whenever I run the appl, the data is automatically populated from R/3 into dropdown list. It is working fine in my NWDS.
    I have integrated this appl in to Enterprise Portal. Now when i execute that appl, I am getting
    'Access Denied error'. (The data is not poulating into my dropdown list).
    But I have integrated the FlightList appl, into Enterprise Portal, which is working fine.
    Is there any settings/configurations needs to be done before integrating my appl into EP?
    Thanks&regards,
    Ganesh

    Hi,
    For the Web Dynpro application which fetches data from R/3 system, you have to establish JCO destionation in Portal->Content Administration->Web Dynpro. Open you application from the portal content list in the left panel. In the right check for the JCO connection. If not existing, create JCO with the required credentials of the R/3 system, like client, message server, userid/pwd or Ticket, userid, password. After testing/ping is successful, your application will work fine in the portal.
    Regards,
    Srinivasan T

  • Starting of database and listener automatically while starting server

    how to start the listener and database automatically while starting RH-LINUX server itself?
    thanks for advance
    Mohan

    Hello Mohan,
    following is the code of my shell, which i use for starting, stopping, restarting teh oracle and listener service, except your oracle home location and oracle user i do not think you need to change any thing..also i assume that you some basic knowledge of shell programming.
    put this /etc/rc.d/init.d, then add this service by chkconfig -- add oracle (if oracle is the file name in whcih this shell exists).
    it will run for 3,4,5 of runlevels with priority as 20, 80
    thanx in advance..subodh
    #!/bin/sh
    # Description: This Scripts starts stops Oracle database and listner
    # chkconfig: - 345 20 80
    ORACLE_OWNR='oracle'
    ORACLE_LOCN='/oracle/product/10.1.0/bin'
    echo "Check whethere the file exists or not"
    if [ ! -f '$ORACLE_LOCN/lsnrctl' -o ! -d $ORACLE_LOCN ]; then
    echo "Unable to Start the Oracle Service"
    fi
    case "$1" in
    start)
    echo "Starting up Oracle Database and Listener Service"
    su - $ORACLE_OWNR -c "$ORACLE_LOCN/dbstart"
    su - $ORACLE_OWNR -c "$ORACLE_LOCN/lsnrctl start"
    touch /var/log/oracle
    stop)
    echo "Stoping Oracle Database and Listener Service"
    su - $ORACLE_OWNR -c "$ORACLE_LOCN/dbshut"
    su - $ORACLE_OWNR -c "$ORACLE_LOCN/lsnrctl stop"
    touch /var/log/oracle
    restart|reload)
    echo "Restarting Oracle Database and Listener Service"
    $0 stop
    $0 start
    echo "Usuage Oracle start|stop|restart|reload"
    exit 1
    esac
    exit 0

  • Access Denied - while published

    Hello,
    Iam trying to publish the changes made on my machine to a
    server through the network.
    I have all permission (write/modify/delete) on that server,
    but when I use Robohelp, getting "Access Denied" error & unable
    to publish.
    Looks like this happens only to the Flash & XML files.
    Any ideas & Suggestions to fix this problem.
    Thank you in advance.
    Saangy

    Welcome, Saangy.
    You didn't mention what version of RoboHelp you are using or
    what kind of web server you are publishing to. A Windows web server
    (IIS)? A UNIX web server? RoboHelp Engine 4? RoboHelp Server 6?
    That said, (and not being an IT person) it sounds like a
    permissions problem involving your network and not RoboHelp itself.
    Just having write/modify/delete permissions is not the only
    thing that might cause problems. My guess is that you'll need the
    help of your network administrator.
    If you'd like to elaborate a bit more, we'll try to help.
    john

Maybe you are looking for

  • How to read a very BIG XML-File

    Hello together, how can I read a XML file of e.g. 2 GByte in ABAP ( Release 4.6C ). The file should be read from the Application-Server ( not from the Front-End ). Problem: Too much MEMORY is needed by the upload of the complete file into an internal

  • How to expose something as a DOM object in a browser window

    Hi all, I am working on a E-Learning platform which adheres to the SCORM Runtime Environment (http://www.adlnet.org/library/documents/scorm/scormexamples/SCORM1_2_SampleRTE1_2.zip). From the SCORM Runtime Environment spec [page 3-6]: "(1) The LMS (Le

  • ITunes 11.1 (Update) - no apology, no keep-informed action - is that normal?

    My podcast collection has become unmanageable and Apple just keeps mum? no Hot News RSS with an APOLOGY, no keep informed about progress, plan of remedial action, nothing? All I have been told from the Support side is that they'll be fixing mobile ga

  • Question on Processing Pattern Sessions - not behaving as expected

    I have implemented some schedulable jobs in my extensible cache configuration that are scheduled at a fixed rate and then use the processing pattern to submit work to the grid. However I am seeing some unexpected behaviour which does not seem to make

  • The content ID 'ABCD1234' is not unique exception while content checkin

    Hi All, I have enabled IsAutoNumber on UCM. So the content id will get auto generated while checkin the content. But when i am checkin the content without giving content id following exception is coming intradoc.common.ServiceException: !csUnableToCh